Upgrading the Quality of Solid Fuel Made from Nyamplung (Calophyllum inophyllum) Wastes Using Hydrothermal Carbonization Treatment

One of the major problems faced in managing biomass waste to higher quality products is choosing the right technology.Wastes are used as an alternative fuel,with increase in the calorific value.Hydrothermal carbonization(HTC)is a biomass conversion technology,used to obtain solid fuel.This study aims to utilize of Calophyllum inophyllum as an alternative solid fuel through HTC.The calorific value and proximate of the hydrochar will be determined and analyzed to find out its quality.The experiments were carried out at temperature variations of 160℃,190℃,and 220℃ and holding times of 30 and 60 minutes.The results show that an increase in temperature and holding time causes a decline in the moisture content 1.87%,volatile matter 54.03%,and ash content 12.35%,respectively,leading to elevations in the fixed carbon at 31.75%.In addition,the highest calorific value of 4149 Kcal/Kg was produced at a temperature of 220℃,within a holding time of 60 minutes.The results showed a significant increase in the quality of solid fuels between 3500–4611 Kcal/Kg in accordance with the American Standard Testing and Materials(ASTM).Therefore,this research leads to an important finding that Calophyllum inophyllum waste through the HTC process can be used as an alternative fuel to substitute lignite coal,which is environmentally friendly.

A Review of Literature on Residential Solid Fuel Burning, and Consequently the Implications of Meeting the European 2050 Low-Carbon Targets

This paper is intended to source literature, identifying the adverse impacts on human health, from the pollutants released from residential burning from both fossil fuel and biomass sources. The literature sourced was ascertained through the conduction of a systematic literature review. The author assessed peer-reviewed English language articles, which had been published within the last five years. The studies reviewed indicated a clear increase in the burning of residential solid fuels. The findings suggest that residential solid fuel combustion is occurring in developed countries, primarily as a secondary source of heating during the winter months. The study concluded that similarly to bituminous coal, the domestic burning of wood also had adverse effects on human health. The intentions of UK Climate Change Act 2008 are to achieve an 80% reduction by the year 2050 in the net carbon account from the 1990 baseline. It is recommended for countries to meet the European 2050 targets, long-term measures need to be adopted. This includes switching from residential solid fuel burning to heating methods such as oil and gas, which are necessary in improving overall air quality and public health.

Experimental Study of the Fry-Drying Phenomena of Organic Wastes in Hot Oil for Waste-Derived Solid Fuel

In sludge treatment, drying sludge using typical technology with high water content to a water content of approximately 10% is always difficult because of adhesive characteristics of sludge in drying. Many methods have been applied, including direct and indirect heat drying, but these approaches of reducing water content to below 40% after drying are very inefficient in energy utilization of drying sludge. In this study, fry-drying technology with a high heat transfer coefficient of approximately 500 W/m2·°C was used to dry swine excreta, sewage and industrial sludge. Also waste oil was used in the fry-drying process, and because the oil’s boiling point is between 240°C and 340°C and the specific heat is approximately 60% of that of water. In the fry-drying system, the sludge is input by molding it into a designated form after heating the waste oil at temperatures between 130°C and 150°C. At these temperatures, the heated oil rapidly evaporates the water contained in the sludge, leaving the oil itself. After approximately 8 - 10 min, the water content of the sludge was less than 10%, and its heating value surpassed 20,000 kJ/kg. Indeed, this makes the organic sludge appropriate for use as a solid fuel. The dried swine excreta, sewage and industrial sludge can be used in an incinerator like low-rank coal or solid fuel.

A Very Solid Fuel: Ferrous Iron Oxide as a Geochemical Energy Source

Ferrous iron oxides, present in abundant minerals such as olivines, can be oxidized to ferric iron oxide to produce more energy per unit oxygen than carbon and hydrogen. These “geofuels” are essentially inexhaustible. Energy might be extracted from geofuels by using the ferrous iron oxide to reduce fluids for use in a fuel cell. Water can be reduced by geofuels, producing hydrogen fuel. Ferrous iron oxide containing rocks are abundant, but diluted with inert oxides. Exploiting them requires new technologies to extract the energy and handle the oxidized mineral residues.

Recent progresses in the development of tubular segmented-in-series solid oxide fuel cells:Experimental and numerical study

Solid oxide fuel cells(SOFCs)have attracted a great deal of interest because they have the highest efficiency without using any noble metal as catalysts among all the fuel cell technologies.However,traditional SOFCs suffer from having a higher volume,current leakage,complex connections,and difficulty in gas sealing.To solve these problems,Rolls-Royce has fabricated a simple design by stacking cells in series on an insulating porous support,resulting in the tubular segmented-in-series solid oxide fuel cells(SIS-SOFCs),which achieved higher output voltage.This work systematically reviews recent advances in the structures,preparation methods,perform-ances,and stability of tubular SIS-SOFCs in experimental and numerical studies.Finally,the challenges and future development of tubular SIS-SOFCs are also discussed.The findings of this work can help guide the direction and inspire innovation of future development in this field.

Boosting oxygen reduction activity and CO_(2) resistance on bismuth ferrite-based perovskite cathode for low-temperature solid oxide fuel cells below 600℃

Developing efficient and stable cathodes for low-temperature solid oxide fuel cells(LT-SOFCs) is of great importance for the practical commercialization.Herein,we propose a series of Sm-modified Bi_(0.7-x)Sm_xSr_(0.3)FeO_(3-δ) perovskites as highly-active catalysts for LT-SOFCs.Sm doping can significantly enhance the electrocata lytic activity and chemical stability of cathode.At 600℃,Bi_(0.675)Sm_(0.025)Sr_(0.3)FeO_(3-δ)(BSSF25) cathode has been found to be the optimum composition with a polarization resistance of 0.098 Ω cm^2,which is only around 22.8% of Bi_(0.7)Sr_(0.3)FeO_(3-δ)(BSF).A full cell utilizing BSSF25 displays an exceptional output density of 790 mW cm^(-2),which can operate continuously over100 h without obvious degradation.The remarkable electrochemical performance observed can be attributed to the improved O_(2) transport kinetics,superior surface oxygen adsorption capacity,as well as O_(2)p band centers in close proximity to the Fermi level.Moreover,larger average bonding energy(ABE) and the presence of highly acidic Bi,Sm,and Fe ions restrict the adsorption of CO_(2) on the cathode surface,resulting in excellent CO_(2) resistivity.This work provides valuable guidance for systematic design of efficient and durable catalysts for LT-SOFCs.

From concept to commercialization:A review of tubular solid oxide fuel cell technology

The reduced sealing difficulty of tubular solid oxide fuel cells(SOFCs)makes the stacking of tubular cell groups relatively easy,and the thermal stress constraints during stack operation are smaller,which helps the stack to operate stably for a long time.The special design of tubular SOFC structures can completely solve the problem of high-temperature sealing,especially in the design of multiple single-cell series integrated into one tube,where each cell tube is equivalent to a small electric stack,with unique characteristics of high voltage and low current output,which can significantly reduce the ohmic polarization loss of tubular cells.This paper provides an overview of typical tubular SOFC structural designs both domestically and internationally.Based on the geometric structure of tubular SOFCs,they can be divided into bamboo tubes,bamboo flat tubes,single-section tubes,and single-section flat tube structures.Meanwhile,this article provides an overview of commonly used materials and preparation methods for tubular SOFCs,including commonly used materials and preparation methods for support and functional layers,as well as a comparison of commonly used preparation methods for microtubule SOFCs,It introduced the three most important parts of building a fuel cell stack:manifold,current collector,and ceramic adhesive,and also provided a detailed introduction to the power generation systems of different tubular SOFCs,Finally,the development prospects of tubular SOFCs were discussed.

Investigation and optimization of high-valent Ta-doped SrFeO_(3-δ)as air electrode for intermediate-temperature solid oxide fuel cells

To explore highly active and thermomechanical stable air electrodes for intermediate-temperature solid oxide fuel cells(ITSOFCs),10mol%Ta5+doped in the B site of strontium ferrite perovskite oxide(SrTa_(0.1)Fe_(0.9)O_(3-δ),STF)is investigated and optimized.The effects of Ta^(5+)doping on structure,transition metal reduction,oxygen nonstoichiometry,thermal expansion,and electrical performance are evaluated systematically.Via 10mol%Ta^(5+)doping,the thermal expansion coefficient(TEC)decreased from 34.1×10^(-6)(SrFeO_(3-δ))to 14.6×10^(-6) K^(-1)(STF),which is near the TEC of electrolyte(13.3×10^(-6) K^(-1) for Sm_(0.2)Ce_(0.8)O_(1.9),SDC),indicates excellent thermomechanical compatibility.At 550-750℃,STF shows superior oxygen vacancy concentrations(0.262 to 0.331),which is critical in the oxygen-reduction reaction(ORR).Oxygen temperature-programmed desorption(O_(2)-TPD)indicated the thermal reduction onset temperature of iron ion is around 420℃,which matched well with the inflection points on the thermos-gravimetric analysis and electrical conductivity curves.At 600℃,the STF electrode shows area-specific resistance(ASR)of 0.152Ω·cm^(2) and peak power density(PPD)of 749 mW·cm^(-2).ORR activity of STF was further improved by introducing 30wt%Sm_(0.2)Ce_(0.8)O_(1.9)(SDC)powder,STF+SDC composite cathode achieving outstanding ASR value of 0.115Ω·cm2 at 600℃,even comparable with benchmark cobalt-containing cathode,Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-δ)(BSCF).Distribution of relaxation time(DRT)analysis revealed that the oxygen surface exchange and bulk diffusion were improved by forming a composite cathode.At 650℃,STF+SDC composite cathode achieving an outstanding PPD of 1117 mW·cm^(-2).The excellent results suggest that STF and STF+SDC are promising air electrodes for IT-SOFCs.

Lattice Boltzmann simulation study of anode degradation in solid oxide fuel cells during the initial aging process

For present solid oxide fuel cells(SOFCs),rapid performance degradation is observed in the initial aging process,and the dis-cussion of the degradation mechanism necessitates quantitative analysis.Herein,focused ion beam-scanning electron microscopy was em-ployed to characterize and reconstruct the ceramic microstructures of SOFC anodes.The lattice Boltzmann method(LBM)simulation of multiphysical and electrochemical processes in the reconstructed models was performed.Two samples collected from industrial-size cells were characterized,including a reduced reference cell and a cell with an initial aging process.Statistical parameters of the reconstructed microstructures revealed a significant decrease in the active triple-phase boundary and Ni connectivity in the aged cell compared with the reference cell.The LBM simulation revealed that activity degradation is dominant compared with microstructural degradation during the initial aging process,and the electrochemical reactions spread to the support layer in the aged cell.The microstructural and activity de-gradations are attributed to Ni migration and coarsening.

Migration behavior of solid fuel particles during granulation process and its influence on combustion property

Iron ore sintering process is the main CO_(2) emission source throughout the integrate steelworks,which primarily comes from the combustion of solid fuels.Improving the combustion efficiency and reducing the solid fuel consumption are important ways to reduce the CO_(2) emission in the sintering process.Around the efficient combustion of fuel,the migration behavior and combustion characteristics of solid fuel in the granulation process were investigated.The results indicated that during the granulation process,fuel particles with size less than 0.5 mm mainly migrated into the granules with grain size of 1-3,3-5 and 5-8 mm;fuel particles with size of 0.5^(-1)mm mainly migrated into granules of 1-3 mm;fuel particles with size of 1-3,3-5 and 5-8 mm mainly entered the granules with the same grain size.With the increase in fuel particles grain size from-0.5 to+8 mm,the combustion efficiency exhibited a firstly-increasing and then decreasing tendency,while the NO_(x) exhibited a decreasing tendency.Potential reason can be described that finer fuel particles(-1 mm)easily distributed in the outer layer of the granules,which combusted fiercely due to its larger specific surface area,leading to the development of incomplete combustion and the conversion of fuel nitrogen;the combustion efficiency of larger fuel particles was restricted by the inner diffusion of O_(2),which then contributed to the reduction of NO_(x) under the inadequate combustion atmosphere.

Upgrading process of palm empty fruit bunches as alternative solid fuel: a review

A total of 37.5 million tons of palm empty fruit bunches(EFBs)produced in Indonesia in 2018 have the potential to be used as an alternative eco-friendly solid fuel.However,a pretreatment process is necessary to increase the heating value and reduce the po-tassium content of EFBs.Several methods can be employed to improve the characteristics of EFBs as a solid fuel,such as drying and torrefaction to increase the heating value and the leaching process for reducing the potassium content of EFBs.The main concept of increasing the heating value is to increase the fuel content,which is carbon.Through drying,the carbon ratio can be increased by reducing the moisture content and,through torrefaction,the carbon ratio could be increased due to the decomposition of ligno-cellulose.A simple way to reduce the potassium content of EFBs is the leaching process.Two types of leaching treatment have been studied before:soaking and stirring treatment.This study reviews those methods to make EFBs more suitable as a solid fuel with a high heating value and less potassium content.Increasing the carbon content in EFBs is crucial for enhancing their heating value as a fuel.Drying and torrefaction decrease the moisture content and modify the chemical structure,resulting in higher carbon ratios.The leaching process effectively reduces the potassium content of EFBs and stirring treatment is more effective than immersion treat-ment.Torrefaction positively affects leaching by decreasing the potassium content,while hydrophobicity may hinder leaching by re-pelling water.The high moisture content of leached EFBs requires additional energy for evaporation during torrefaction,resulting in a lower energy density yield compared with raw EFBs.Adjustments may also be required to account for the decreased mineral content,which functions as a torrefaction catalyst in EFBs that have not been leached.

Effects of operating conditions on the performance degradation and anode microstructure evolution of anode-supported solid oxide fuel cells

Performance degradation shortens the life of solid oxide fuel cells in practical applications.Revealing the degradation mechanism is crucial for the continuous improvement of cell durability.In this work,the effects of cell operating conditions on the terminal voltage and anode microstructure of a Ni-yttria-stabilized zirconia anode-supported single cell were investigated.The microstructure of the anode active area near the electrolyte was characterized by laser optical microscopy and focused ion beam-scanning electron microscopy.Ni depletion at the anode/electrolyte interface region was observed after 100 h discharge tests.In addition,the long-term stability of the single cell was evaluated at 700℃for 3000 h.After an initial decline,the anode-supported single cell exhibits good durability with a voltage decay rate of 0.72%/kh and an electrode polarization resistance decay rate of 0.17%/kh.The main performance loss of the cell originates from the initial degradation.

Recent advances and influencing parameters in developing electrode materials for symmetrical solid oxide fuel cells

This article delivers a robust overview of potential electrode materials for use in symmetrical solid oxide fuel cells(S-SOFCs),a relatively new SOFC technology.To this end,this article provides a comprehensive review of recent advances and progress in electrode materials for S-SOFC,discussing both the selection of materials and the challenges that come with making that choice.This article discussed the relevant factors involved in developing electrodes with nano/microstructure.Nanocomposites,e.g.,non-cobalt and lithiated materials,are only a few of the electrode types now being researched.Furthermore,the phase structure and microstructure of the produced materials are heavily influenced by the synthesis procedure.Insights into the possibilities and difficulties of the material are discussed.To achieve the desired microstructural features,this article focuses on a synthesis technique that is either the most recent or a better iteration of an existing process.The portion of this analysis that addresses the risks associated with manufacturing and the challenges posed by materials when fabricating S-SOFCs is the most critical.This article also provides important and useful recommendations for the strategic design of electrode materials researchers.

Fabrication of Gd_(2)O_(3)-doped CeO_(2)thin films through DC reactive sputtering and their application in solid oxide fuel cells

Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscaling for industrial applications.GDC thin films were successfully fabricated through reactive sputtering using a Gd_(0.2)Ce_(0.8)(at%)metallic target,and their application in solid oxide fuel cells,such as buffer layers between yttria-stabilized zirconia(YSZ)/La0.6Sr0.4Co0.2Fe0.8O_(3−δ)and as sublayers in the steel/coating system,was evaluated.First,the direct current(DC)reactive-sputtering behavior of the GdCe metallic target was determined.Then,the GDC films were deposited on NiO-YSZ/YSZ half-cells to investigate the influence of oxygen flow rate on the quality of annealed GDC films.The results demonstrated that reactive sputtering can be used to prepare thin and dense GDC buffer layers without high-temperature sintering.Furthermore,the cells with a sputtered GDC buffer layer showed better electrochemical performance than those with a screen-printed GDC buffer layer.In addition,the insertion of a GDC sublayer between the SUS441 interconnects and the Mn-Co spinel coatings contributed to the reduction of the oxidation rate for SUS441 at operating temperatures,according to the area-specific resistance tests.

Low molecular weight alkane-fed solid oxide fuel cells for power and chemicals cogeneration

This paper presents a review of low molecular weight alkane-fed solid oxide fuel cells(SOFCs),which,unlikely the conventional use of SOFCs for only power production,are utilized to cogenerate produce useful chemicals at the same time.The cogeneration processes in SOFC have been classified according to the different types of fuel.C_(2)and C_(3)alkenes and synthesis gas are the main cogenerated chemicals together with electricity.The chemicals and energy cogeneration in a fuel cell reactor seems to be an effective alternative to conventional reactors for only chemicals production and conventional fuel cells for only power production.Although,the use of SOFCs for chemicals and energy cogeneration has proved successful in the industrial setting,the development of new catalysts aimed at obtaining the desired chemicals together with the production of a high amount of energy,and optimizing SOFC operation conditions is still a challenge to enhance system performance and make commercial applications workable.

Interface engineering of an electrospun nanofiber-based composite cathode for intermediate-temperature solid oxide fuel cells

Sluggish oxygen reduction reaction(ORR)kinetics are a major obstacle to developing intermediate-temperature solid-oxide fuel cells(IT-SOFCs).In particular,engineering the anion defect concentration at an interface between the cathode and electrolyte is important for facilitating ORR kinetics and hence improving the electrochemical performance.We developed the yttria-stabilized zirconia(YSZ)nanofiber(NF)-based composite cathode,where the oxygen vacancy concentration is controlled by varying the dopant cation(Y2O3)ratio in the YSZ NFs.The composite cathode with the optimized oxygen vacancy concentration exhibits maximum power densities of 2.66 and 1.51 W cm^(−2)at 700 and 600℃,respectively,with excellent thermal stability at 700℃ over 500 h under 1.0 A cm^(−2).Electrochemical impedance spectroscopy and distribution of relaxation time analysis revealed that the high oxygen vacancy concentration in the NF-based scaffold facilitates the charge transfer and incorporation reaction occurred at the interfaces between the cathode and electrolyte.Our results demonstrate the high feasibility and potential of interface engineering for achieving IT-SOFCs with higher performance and stability.

Temperature Gradient Analyses of a Tubular Solid Oxide Fuel Cell Fueled by Methanol

Thermal management in solid oxide fuel cells(SOFC)is a critical issue due to non-uniform electrochemical reactions and convective fl ows within the cells.Therefore,a 2D mathematical model is established herein to investigate the thermal responses of a tubular methanol-fueled SOFC.Results show that unlike the low-temperature condition of 873 K,where the peak temperature gradient occurs at the cell center,it appears near the fuel inlet at 1073 K because of the rapid temperature rise induced by the elevated current density.Despite the large heat convection capacity,excessive air could not eff ectively eliminate the harmful temperature gradient caused by the large current density.Thus,optimal control of the current density by properly selecting the operating potential could generate a local thermal neutral state.Interestingly,the maximum axial temperature gradient could be reduced by about 18%at 973 K and 20%at 1073 K when the air with a 5 K higher temperature is supplied.Additionally,despite the higher electrochemical performance observed,the cell with a counter-fl ow arrange-ment featured by a larger hot area and higher maximum temperature gradients is not preferable for a ceramic SOFC system considering thermal durability.Overall,this study could provide insightful thermal information for the operating condition selection,structure design,and stability assessment of realistic SOFCs combined with their internal reforming process.

Enhancing layered perovskite ferrites with ultra-high-density nanoparticles via cobalt doping for ceramic fuel cell anode

Nanoparticles anchored on the perovskite surface have gained considerable attention for their wide-ranging applications in heterogeneous catalysis and energy conversion due to their robust and integrated structural configuration.Herein,we employ controlled Co doping to effectively enhance the nanoparticle exsolution process in layered perovskite ferrites materials.CoFe alloy nanoparticles with ultra-high-density are exsolved on the(PrBa)_(0.95)(Fe_(0.8)Co_(0.1)Nb_(0.1))2O_(5+δ)(PBFCN_(0.1))surface under reducing atmosphere,providing significant amounts of reaction sites and good durability for hydrocarbon catalysis.Under a reducing atmosphere,cobalt facilitates the reduction of iron cations within PBFCN_(0.1),leading to the formation of CoFe alloy nanoparticles.This formation is accompanied by a cation exchange process,wherein,with the increase in temperature,partial cobalt ions are substituted by iron.Meanwhile,Co doping significantly enhance the electrical conductivity due to the stronger covalency of the Cosingle bondO bond compared with Fesingle bondO bond.A single cell with the configuration of PBFCN_(0.1)-Sm_(0.2)Ce_(0.8)O_(1.9)(SDC)|SDC|Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3−δ)(BSCF)-SDC achieves an extremely low polarization resistance of 0.0163Ωcm^(2)and a high peak power density of 740 mW cm^(−2)at 800℃.The cell also shows stable operation for 120 h in H_(2)with a constant current density of 285 mA cm^(−2).Furthermore,employing wet C_(2)H_(6)as fuel,the cell demonstrates remarkable performance,achieving peak power densities of 455 mW cm^(−2)at 800℃and 320 mW cm^(−2)at 750℃,marking improvements of 36%and 70%over the cell with(PrBa)_(0.95)(Fe_(0.9)Nb_(0.1))_(2)O_(5+δ)(PBFN)-SDC at these respective temperatures.This discovery emphasizes how temperature influences alloy nanoparticles exsolution within doped layered perovskite ferrites materials,paving the way for the development of high-performance ceramic fuel cell anodes.

Dissolution kinetics of solid fuels used in COREX gasifier and its influence factors

Carbon dissolution from solid fuels used in a COREX gasifier was investigated in a high-temperature furnace to investigate the influences of temperature, carbon structure and ash properties of solid fuels into molten iron on carbon dissolution behavior. The results showed that the final carbon content of molten iron and dissolution reaction rate of carbon increased as the temperature increased. However, the dissolution behavior of different solid fuels varied with their properties. At the same temperature, the dissolution reaction rate of solid fuel from high to low was coke, semi-coke and lump coal. The apparent reaction rate constants of solid fuel were calculated using the piecewise fitting method based on the experimental data. The analyzed results showed that the dissolution rates of solid fuels had a good correlation with their microcrystalline structures. Moreover, the carbon crystallite structures of solid fuels used in COREX had greater influence on dissolution behavior than their ash properties.

Future development of solid oxide fuel cell

Solid oxide fuel cell(SOFC) technology and its status and problems were briefly described.Several topics for furtherresearch and development were proposed.