On January 11, 2024, the Gravity-1 launch vehicle successfully carried out its maiden flight from a mobile sea platform off the coast of Haiyang in Shandong Province, sending three meteorological satellites, Yunyao-1 ...On January 11, 2024, the Gravity-1 launch vehicle successfully carried out its maiden flight from a mobile sea platform off the coast of Haiyang in Shandong Province, sending three meteorological satellites, Yunyao-1 satellite No. 18-20, into an orbit about 500 km above the ground. The successful debut flight of Gravity-1 broke many records such as the world's largest solid launch vehicle, the first sea-launched strap-on launch vehicle in the world, with the maximum carrying capacity of current commercial launch vehicle in China. This flight marked a big step in the field of China's commercial space launch application. A new breakthrough has been made, which is of great significance for further expanding China's diversified and large-scale launch capabilities of medium and low orbit satellites, expanding the spectrum of China's launch vehicle types, and promoting the development of space science.展开更多
The large-range uncertainties of specific impulse,mass flow per second,aerodynamic coefficients and atmospheric density during rapid turning in solid launch vehicles(SLVs) ascending leads to the deviation of the actua...The large-range uncertainties of specific impulse,mass flow per second,aerodynamic coefficients and atmospheric density during rapid turning in solid launch vehicles(SLVs) ascending leads to the deviation of the actual trajectory from the reference one.One of the traditional trajectory tracking methods is to observe the uncertainties by Extended State Observer(ESO) and then modify the control commands.However,ESO cannot accurately estimate the uncertainties when the uncertainty ranges are large,which reduces the guidance accuracy.This paper introduces differential inclusion(DI) and designs a controller to solve the large-range parameter uncertainties problem.When above uncertainties have large ranges,it can be combined with the ascent dynamic equation and described as a DI system in the mathematical form of a set.If the DI system is stabilized,all the subsets are stabilized.Different from the traditional controllers,the parameters of the designed controller are calculated by the uncertain boundaries.Therefore,the controller can solve the problem of large-range parameter uncertainties of in ascending.Firstly,the ascent deviation system is obtained by linearization along the reference trajectory.The trajectory tracking system with engine parameters and aerodynamic uncertainties is described as an ascent DI system with respect to state deviation,which is called DI system.A DI adaptive saturation tracking controller(DIAST) is proposed to stabilize the DI system.Secondly,an improved barrier Lyapunov function(named time-varying tangent-log barrier Lyapunov function) is proposed to constrain the state deviations.Compared with traditional barrier Lyapunov function,it can dynamically adjust the boundary of deviation convergence,which improve the convergence rate and accuracy of altitude,velocity and LTIA deviation.In addition,the correction amplitudes of angle of attack(AOA) and angle of sideslip(AOS) need to be limited in order to guarantee that the overload constraint is not violated during actual flight.In this paper,a fixed time adaptive saturation compensation auxiliary system is designed to shorten the saturation time and accelerate the convergence rate,which eliminates the adverse effects caused by the saturation.Finally,it is proved that the state deviations are ultimately uniformly bounded under the action of DIAST controller.Simulation results show that the DI ascent tracking system is stabilized within the given uncertainty boundary values.The feasible bounds of uncertainty is broadened compared with Integrated Guidance and Control algorithm.Compared with Robust Gain-Scheduling Control method,the robustness to the engine parameters are greatly improved and the control variable is smoother.展开更多
The solid rocket motors for the escape system of China’s LM-2 F manned launch vehicle are described,the key technologies and technical innovations utilized are summarized.The technical features and development of for...The solid rocket motors for the escape system of China’s LM-2 F manned launch vehicle are described,the key technologies and technical innovations utilized are summarized.The technical features and development of foreign manned launch abort systems are also presented.The development trends of the solid rocket motor for future Chinese manned launch vehicle escape systems are proposed,which can provide a reference for the future development of manned launch vehicle escape systems.展开更多
The Kinetica-I rocket is designed for small-and medium-sized spacecraft launch missions to sun-synchronous orbit and low Earth orbit.The maiden flight was performed on July 27,2022.The Kinetica-I rocket is characteriz...The Kinetica-I rocket is designed for small-and medium-sized spacecraft launch missions to sun-synchronous orbit and low Earth orbit.The maiden flight was performed on July 27,2022.The Kinetica-I rocket is characterized by competitive payload capability and cost,robust orbital insertion accuracy,high reliability,availability at short notice and logistical versatility.12 new core technologies have been achieved during the development of the rocket.It is of great significance in promoting the innovation of China's solid carrier rocket technology and science exploration.展开更多
The design of new Satellite Launch Vehicle （SLV） is of interest, especially when a combination of Solid and Liquid Propulsion is included. Proposed is a conceptual design and optimization technique for multistage Lo...The design of new Satellite Launch Vehicle （SLV） is of interest, especially when a combination of Solid and Liquid Propulsion is included. Proposed is a conceptual design and optimization technique for multistage Low Earth Orbit （LEO） bound SLV comprising of solid and liquid stages with the use of Genetic Algorithm （GA） as global optimizer. Convergence of GA is improved by introducing initial population based on the Design of Experiments （DOE） Technique. Latin Hypercube Sampling （LHS）-DOE is used for its good space filling properties. LHS is a stratified random procedure that provides an efficient way of sampling variables from their multivariate distributions. In SLV design minimum Gross Lift offWeight （GLOW） concept is traditionally being sought. Since the development costs tend to vary as a function of GLOW, this minimum GLOW is considered as a minimum development cost concept. The design approach is meaningful to initial design sizing purpose for its computational efficiency gives a quick insight into the vehicle performance prior to detailed design.展开更多
The problem of real-time trajectory optimization for small solid launch vehicle of operational responsive space (ORS) was studied by using pseudospectral method. According to the characteristic of the trajectory desig...The problem of real-time trajectory optimization for small solid launch vehicle of operational responsive space (ORS) was studied by using pseudospectral method. According to the characteristic of the trajectory design, the dynamics model was set up in the inertia right-angled reference frame, and the equation and parameter at the orbit injection point were simplified and converted. The infinite dimension dynamic optimal control problem was converted to a finite dimension static state optimization problem and the algorithm reduced the complexity so as to become a general algorithm in trajectories optimization. With the trajectories optimization of a three-stage solid vehicle with a liquor upper stage as example, the model of the trajectory optimization was set up and simulations were carried out. The results demonstrated the advantage and validity of the pseudospectral method. The rejection time of fairing was also analyzed by the simulation results, and the optimal flight procedure and trajectory were obtained.展开更多
Dynamic modeling and active control of a strap-on launch vehicle are studied in this paper. In the dynamic modeling, the double-compatible free-interface modal synthesis method is used to establish dynamic model of th...Dynamic modeling and active control of a strap-on launch vehicle are studied in this paper. In the dynamic modeling, the double-compatible free-interface modal synthesis method is used to establish dynamic model of the system, and its model precision is compared with those of finite element method(FEM), fixedinterface modal synthesis method and free-interface modal synthesis method. In the active control, the swing angle of rocket motor is used as design variable, and the control law design based on the model of mass center motion is adopted to validate the system. Simulation results indicate that the double-compatible model synthesis method can properly approximate the FEM which is used as the benchmark solution, and the model precision of the double-compatible modal synthesis method is obviously higher than those of the fixed-interface and freeinterface modal synthesis methods. Based on the control law design, the deflection of mass center of the launch vehicle is very small.展开更多
文摘On January 11, 2024, the Gravity-1 launch vehicle successfully carried out its maiden flight from a mobile sea platform off the coast of Haiyang in Shandong Province, sending three meteorological satellites, Yunyao-1 satellite No. 18-20, into an orbit about 500 km above the ground. The successful debut flight of Gravity-1 broke many records such as the world's largest solid launch vehicle, the first sea-launched strap-on launch vehicle in the world, with the maximum carrying capacity of current commercial launch vehicle in China. This flight marked a big step in the field of China's commercial space launch application. A new breakthrough has been made, which is of great significance for further expanding China's diversified and large-scale launch capabilities of medium and low orbit satellites, expanding the spectrum of China's launch vehicle types, and promoting the development of space science.
基金supported by the National Natural Science Foundation of China (Grant Nos.61627810, 61790562 and 61403096)。
文摘The large-range uncertainties of specific impulse,mass flow per second,aerodynamic coefficients and atmospheric density during rapid turning in solid launch vehicles(SLVs) ascending leads to the deviation of the actual trajectory from the reference one.One of the traditional trajectory tracking methods is to observe the uncertainties by Extended State Observer(ESO) and then modify the control commands.However,ESO cannot accurately estimate the uncertainties when the uncertainty ranges are large,which reduces the guidance accuracy.This paper introduces differential inclusion(DI) and designs a controller to solve the large-range parameter uncertainties problem.When above uncertainties have large ranges,it can be combined with the ascent dynamic equation and described as a DI system in the mathematical form of a set.If the DI system is stabilized,all the subsets are stabilized.Different from the traditional controllers,the parameters of the designed controller are calculated by the uncertain boundaries.Therefore,the controller can solve the problem of large-range parameter uncertainties of in ascending.Firstly,the ascent deviation system is obtained by linearization along the reference trajectory.The trajectory tracking system with engine parameters and aerodynamic uncertainties is described as an ascent DI system with respect to state deviation,which is called DI system.A DI adaptive saturation tracking controller(DIAST) is proposed to stabilize the DI system.Secondly,an improved barrier Lyapunov function(named time-varying tangent-log barrier Lyapunov function) is proposed to constrain the state deviations.Compared with traditional barrier Lyapunov function,it can dynamically adjust the boundary of deviation convergence,which improve the convergence rate and accuracy of altitude,velocity and LTIA deviation.In addition,the correction amplitudes of angle of attack(AOA) and angle of sideslip(AOS) need to be limited in order to guarantee that the overload constraint is not violated during actual flight.In this paper,a fixed time adaptive saturation compensation auxiliary system is designed to shorten the saturation time and accelerate the convergence rate,which eliminates the adverse effects caused by the saturation.Finally,it is proved that the state deviations are ultimately uniformly bounded under the action of DIAST controller.Simulation results show that the DI ascent tracking system is stabilized within the given uncertainty boundary values.The feasible bounds of uncertainty is broadened compared with Integrated Guidance and Control algorithm.Compared with Robust Gain-Scheduling Control method,the robustness to the engine parameters are greatly improved and the control variable is smoother.
文摘The solid rocket motors for the escape system of China’s LM-2 F manned launch vehicle are described,the key technologies and technical innovations utilized are summarized.The technical features and development of foreign manned launch abort systems are also presented.The development trends of the solid rocket motor for future Chinese manned launch vehicle escape systems are proposed,which can provide a reference for the future development of manned launch vehicle escape systems.
文摘The Kinetica-I rocket is designed for small-and medium-sized spacecraft launch missions to sun-synchronous orbit and low Earth orbit.The maiden flight was performed on July 27,2022.The Kinetica-I rocket is characterized by competitive payload capability and cost,robust orbital insertion accuracy,high reliability,availability at short notice and logistical versatility.12 new core technologies have been achieved during the development of the rocket.It is of great significance in promoting the innovation of China's solid carrier rocket technology and science exploration.
文摘The design of new Satellite Launch Vehicle （SLV） is of interest, especially when a combination of Solid and Liquid Propulsion is included. Proposed is a conceptual design and optimization technique for multistage Low Earth Orbit （LEO） bound SLV comprising of solid and liquid stages with the use of Genetic Algorithm （GA） as global optimizer. Convergence of GA is improved by introducing initial population based on the Design of Experiments （DOE） Technique. Latin Hypercube Sampling （LHS）-DOE is used for its good space filling properties. LHS is a stratified random procedure that provides an efficient way of sampling variables from their multivariate distributions. In SLV design minimum Gross Lift offWeight （GLOW） concept is traditionally being sought. Since the development costs tend to vary as a function of GLOW, this minimum GLOW is considered as a minimum development cost concept. The design approach is meaningful to initial design sizing purpose for its computational efficiency gives a quick insight into the vehicle performance prior to detailed design.
基金Supported by the National High Technology Research and Development Program of China ("863" Program)
文摘The problem of real-time trajectory optimization for small solid launch vehicle of operational responsive space (ORS) was studied by using pseudospectral method. According to the characteristic of the trajectory design, the dynamics model was set up in the inertia right-angled reference frame, and the equation and parameter at the orbit injection point were simplified and converted. The infinite dimension dynamic optimal control problem was converted to a finite dimension static state optimization problem and the algorithm reduced the complexity so as to become a general algorithm in trajectories optimization. With the trajectories optimization of a three-stage solid vehicle with a liquor upper stage as example, the model of the trajectory optimization was set up and simulations were carried out. The results demonstrated the advantage and validity of the pseudospectral method. The rejection time of fairing was also analyzed by the simulation results, and the optimal flight procedure and trajectory were obtained.
基金the National Natural Science Foundation of China(Nos.11132001,11272202 and 11472171)the Key Scientific Project of Shanghai Municipal Education Commission(No.14ZZ021)the Natural Science Foundation of Shanghai(No.14ZR1421000)
文摘Dynamic modeling and active control of a strap-on launch vehicle are studied in this paper. In the dynamic modeling, the double-compatible free-interface modal synthesis method is used to establish dynamic model of the system, and its model precision is compared with those of finite element method(FEM), fixedinterface modal synthesis method and free-interface modal synthesis method. In the active control, the swing angle of rocket motor is used as design variable, and the control law design based on the model of mass center motion is adopted to validate the system. Simulation results indicate that the double-compatible model synthesis method can properly approximate the FEM which is used as the benchmark solution, and the model precision of the double-compatible modal synthesis method is obviously higher than those of the fixed-interface and freeinterface modal synthesis methods. Based on the control law design, the deflection of mass center of the launch vehicle is very small.
