期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Engineering and microstructure properties of contaminated marine sediments solidified by high content of incinerated sewage sludge ash 被引量:2
1
作者 Jiang-Shan Li Yifan Zhou +4 位作者 Xin Chen Qiming Wang Qiang Xue Daniel C.W.Tsang Chi Sun Poon 《Journal of Rock Mechanics and Geotechnical Engineering》 SCIE CSCD 2021年第3期643-652,共10页
Management of incinerated sewage sludge ash(ISSA)and dredged contaminated marine sediments(CMSs)is a great challenge for Hong Kong and other coastal cities due to limited landfilling capacity.The present study investi... Management of incinerated sewage sludge ash(ISSA)and dredged contaminated marine sediments(CMSs)is a great challenge for Hong Kong and other coastal cities due to limited landfilling capacity.The present study investigates the use of high content(20%of sediment by mass)of ISSA in combination with cement/lime for solidification/stabilization(S/S)treatment of CMSs to provide a way to reuse the wastes as construction materials.The results showed that ISSA being a porous material was able to absorb a large amount of water rendering a more efficient solidification process of the marine sediment which normally had a very high water content(w80%).The S/S treatment improved the engineering properties of the sediment,but reduced the workability,especially for the lime-treated samples.Lime can be used to replace ordinary Portland cement(OPC)for better heavy metal immobilization and carbon emission reduction.The hardened sediment samples prepared with 10%of lime and 20%of ISSA could attain a strength of 1.6 MPa after 28 d of curing.In addition,leaching tests confirmed that there was no environmental risk induced by these stabilized materials.The formation of hydrated cementitious compounds including calcium silicate hydrate(CeSeH)/calcium aluminate silicate hydrate(C-A-S-H)/hydrocalumite/calcite was mainly responsible for the strength development in the ISSA/lime-treated sediments. 展开更多
关键词 Contaminated marine sediment(CMs) Incinerated sewage sludge ash(IssA) solidification/stabilization(s/s) heavy metals Construction material
下载PDF
电镀重金属污泥的水泥固化/稳定化处理 被引量:21
2
作者 贾金平 杨骥 孟超 《上海环境科学》 CAS CSCD 1999年第5期229-232,共4页
电镀重金属污泥经425号水泥固化后;其中混凝土:污泥为40:1或50:1样本的强度(28d)可达275号水泥的标准,且对Zn、Cu、Ni、Cr离子的固化效果好;在体系中添加粉煤灰及水玻璃,其早期的固化效果或产物强度低;混凝土:铁氧体污泥(湿法合成,FeSO_... 电镀重金属污泥经425号水泥固化后;其中混凝土:污泥为40:1或50:1样本的强度(28d)可达275号水泥的标准,且对Zn、Cu、Ni、Cr离子的固化效果好;在体系中添加粉煤灰及水玻璃,其早期的固化效果或产物强度低;混凝土:铁氧体污泥(湿法合成,FeSO_4·7H_2O:污泥=4:1)为30:1体系中,固化效果与稳定性均好,且产物强度可达325号水泥标准。 展开更多
关键词 固化 电镀污泥 水泥 重金属 稳定化 污泥处理
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部