A novel dualfunctional monomer, 2-（2＇,2＇,6＇,6＇-tetramethyl-piperidinyl-1＇-oxy）methylbenzene-1,4-dioyl chloride hydrochloride, with two acid chloride groups for step-growth polymerization and a nitroxide group f...A novel dualfunctional monomer, 2-（2＇,2＇,6＇,6＇-tetramethyl-piperidinyl-1＇-oxy）methylbenzene-1,4-dioyl chloride hydrochloride, with two acid chloride groups for step-growth polymerization and a nitroxide group for the mediation of living radical polymerization was synthesized. It was first copolymerized with terephthaloyl chloride and p- phenylenediamine at a feed molar ratio of 1：3：4 in N-methyl-2-pyrrolidone containing 10 wt% calcium chloride at -10℃ to yield a poly（p-phenylene terephthalamide） based macroinitiator, which initiated radical polymerization of styrene at 125℃ to obtain a series of poly（p-phenylene terephthalamide）-g-polystyrenes. A combinatory analysis of proton nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, elementary analysis, thermogravimetry and gel permeation chromatography indicated that the macroinitiator induced the radical polymerization of styrene to proceed in a well- controlled way. The molecular weight of side-chains increased with an increase of monomer conversion, and the molecular weight distribution index remained lower than 1.5. The graft copolymers showed a remarkably improved solubility in N- methyl-2-pyrrolidone and much depressed crystallinity in bulk.展开更多
采用自由基溶液共聚合法,合成了系列磺酸基丙烯酸酯三元无规共聚物表面活性剂(APSA).利用FTIR、1H-NMR、13C-NMR、GPC及元素分析证实了APSA的结构及组成.APSA胶束为核壳结构,随磺酸基含量增加,亲水层增厚.低剪切速率下,APSA溶液的黏度...采用自由基溶液共聚合法,合成了系列磺酸基丙烯酸酯三元无规共聚物表面活性剂(APSA).利用FTIR、1H-NMR、13C-NMR、GPC及元素分析证实了APSA的结构及组成.APSA胶束为核壳结构,随磺酸基含量增加,亲水层增厚.低剪切速率下,APSA溶液的黏度随磺酸基含量的增加而增加,胶束间的相互作用增强,假塑行为增强;高剪切速率下,黏度基本保持一致.DLS和表面张力表明,APSA1可将水溶液的表面张力降至43.26 m N/m.随亲水基团增加,表面张力增加,临界胶束浓度(cmc)增加.溶液浓度在cmc以下时,光散射强度较低且变化缓慢,高于cmc后,光散射强度呈现急剧的线性增长趋势,胶束聚集数急剧增加.随溶液浓度和亲水基团增加,胶束尺寸和分布系数增加.荧光光谱表明,随APSA浓度增加,I1/I3值从1.8降低到约1.2,芘的(0,0)吸收峰从334 nm迁移到338 nm,I338/I334值从0.7增大到1.45,表明疏水基团聚集形成疏水微区,芘分子从水相极性环境转移到胶束疏水内核.随亲水基团含量增加,分子聚集形成胶束的难度增加,速率降低.展开更多
基金supported by the National Natural Science Foundation of China(No.20774001)the National Science Fund for Distinguished Young Scholars(No.20325415)
文摘A novel dualfunctional monomer, 2-（2＇,2＇,6＇,6＇-tetramethyl-piperidinyl-1＇-oxy）methylbenzene-1,4-dioyl chloride hydrochloride, with two acid chloride groups for step-growth polymerization and a nitroxide group for the mediation of living radical polymerization was synthesized. It was first copolymerized with terephthaloyl chloride and p- phenylenediamine at a feed molar ratio of 1：3：4 in N-methyl-2-pyrrolidone containing 10 wt% calcium chloride at -10℃ to yield a poly（p-phenylene terephthalamide） based macroinitiator, which initiated radical polymerization of styrene at 125℃ to obtain a series of poly（p-phenylene terephthalamide）-g-polystyrenes. A combinatory analysis of proton nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, elementary analysis, thermogravimetry and gel permeation chromatography indicated that the macroinitiator induced the radical polymerization of styrene to proceed in a well- controlled way. The molecular weight of side-chains increased with an increase of monomer conversion, and the molecular weight distribution index remained lower than 1.5. The graft copolymers showed a remarkably improved solubility in N- methyl-2-pyrrolidone and much depressed crystallinity in bulk.
文摘采用自由基溶液共聚合法,合成了系列磺酸基丙烯酸酯三元无规共聚物表面活性剂(APSA).利用FTIR、1H-NMR、13C-NMR、GPC及元素分析证实了APSA的结构及组成.APSA胶束为核壳结构,随磺酸基含量增加,亲水层增厚.低剪切速率下,APSA溶液的黏度随磺酸基含量的增加而增加,胶束间的相互作用增强,假塑行为增强;高剪切速率下,黏度基本保持一致.DLS和表面张力表明,APSA1可将水溶液的表面张力降至43.26 m N/m.随亲水基团增加,表面张力增加,临界胶束浓度(cmc)增加.溶液浓度在cmc以下时,光散射强度较低且变化缓慢,高于cmc后,光散射强度呈现急剧的线性增长趋势,胶束聚集数急剧增加.随溶液浓度和亲水基团增加,胶束尺寸和分布系数增加.荧光光谱表明,随APSA浓度增加,I1/I3值从1.8降低到约1.2,芘的(0,0)吸收峰从334 nm迁移到338 nm,I338/I334值从0.7增大到1.45,表明疏水基团聚集形成疏水微区,芘分子从水相极性环境转移到胶束疏水内核.随亲水基团含量增加,分子聚集形成胶束的难度增加,速率降低.
