Thin films and thin film devices have a ubiquitous presence in numerous conventional and emerging technologies. This is because of the recent advances in nanotechnology, the development of functional and smart materia...Thin films and thin film devices have a ubiquitous presence in numerous conventional and emerging technologies. This is because of the recent advances in nanotechnology, the development of functional and smart materials,conducting polymers, molecular semiconductors, carbon nanotubes, and graphene, and the employment of unique properties of thin films and ultrathin films, such as high surface area, controlled nanostructure for effective charge transfer, and special physical and chemical properties, to develop new thin film devices. This paper is therefore intended to provide a concise critical review and research directions on most thin film devices, including thin film transistors, data storage memory, solar cells, organic light-emitting diodes, thermoelectric devices, smart materials, sensors, and actuators. The thin film devices may consist of organic, inorganic, and composite thin layers, and share similar functionality, properties, and fabrication routes. Therefore, due to the multidisciplinary nature of thin film devices, knowledge and advances already made in one area may be applicable to other similar areas. Owing to the importance of developing low-cost, scalable, and vacuum-free fabrication routes, this paper focuses on thin film devices that may be processed and deposited from solution.展开更多
Wearable smart sensors are considered to be the new generation of personal portable devices for health monitoring.By attaching to the skin surface,these sensors are closely related to body signals(such as heart rate,b...Wearable smart sensors are considered to be the new generation of personal portable devices for health monitoring.By attaching to the skin surface,these sensors are closely related to body signals(such as heart rate,blood oxygen saturation,breath markers,etc.)and ambient signals(such as ultraviolet radiation,inflammable and explosive,toxic and harmful gases),thus providing new opportunities for human activity monitoring and personal telemedicine care.Here we focus on photodetectors and gas sensors built from metal chalcogenide,which have made great progress in recent years.Firstly,we present an overview of healthcare applications based on photodetectors and gas sensors,and discuss the requirement associated with these applications in detail.We then discuss advantages and properties of solution-processable metal chalcogenides,followed by some recent achievements in health monitoring with photodetectors and gas sensors based on metal chalcogenides.Last we present further research directions and challenges to develop an integrated wearable platform for monitoring human activity and personal healthcare.展开更多
Solution processability and flexibility still remain major challenges for many thermoelectric(TE)materials,including bismuth telluride(Bi_(2)Te_(3)),a typical and commercially available TE material.Here,we report a ne...Solution processability and flexibility still remain major challenges for many thermoelectric(TE)materials,including bismuth telluride(Bi_(2)Te_(3)),a typical and commercially available TE material.Here,we report a new solutionprocessed method to prepare a flexible film of a Bi_(2)Te_(3)/single-walled carbon nanotube(SWCNT)hybrid,where the dissolved Bi_(2)Te_(3) ion precursors are mixed with dispersed SWCNTs in solution and recrystallized on the SWCNT surfaces to form a“cement-rebar”-like architecture.The hybrid film shows an n-type characteristic,with a stable Seebeck coefficient of^(−1)00.00±1.69μVK^(−1) in air.Furthermore,an extremely low in-plane thermal conductivity of∼0.33Wm^(−1) K^(−1) is achieved at 300 K,and the figure of merit(ZT)reaches 0.47±0.02.In addition,the TE performance is independent of mechanical bending.The unique“cement-rebar”-like architecture is believed to be responsible for the excellent TE performances and the high flexibility.The results provide a new avenue for the fabrication of solution-processable and flexible TE hybrid films and will speed up the applications of flexible electronics and energy conversion.展开更多
Polymer field-effect transistors operated in the n-channel model with a top-gate/bottom-contact are processed using a solution method. The transistor performance depends on the gate dielectric layer. A high performanc...Polymer field-effect transistors operated in the n-channel model with a top-gate/bottom-contact are processed using a solution method. The transistor performance depends on the gate dielectric layer. A high performance polymer transistor is achieved, with the saturated electron mobility of about 0.46cm2/Vs, threshold voltage nearly 0 V and subthreshold sway of about 0.9 V/decade, employing a polystyrene (PS) dielectric layer. The transistor performances are further improved with increasing current and lower operation voltages by utilizing a bi-layer gate dielectric, comprising a thin PS dielectric layer adjacent to the semiconductor to minimize the density of the interface traps for obtaining a small VT, a large μ and a poly(methyl methacrylate) (PMMA) dielectric layer with a relatively high-k adjacent to the gate electrode for enlarging the capacitance, processed from the orthogonal solvents.展开更多
The development of high-performance solution-processed red organic light-emitting diodes(OLEDs) remains a challenge,particularly in terms of maintaining efficiency at high luminance. Here, we designed and synthesized ...The development of high-performance solution-processed red organic light-emitting diodes(OLEDs) remains a challenge,particularly in terms of maintaining efficiency at high luminance. Here, we designed and synthesized four novel orange-red thermally activated delayed fluorescence(TADF) dendrimers that are solution-processable: 2GCz BP, 2DPACz BP, 2FBP2GCz and 2FBP2DPACz. We systematically investigated the effect of substitution position and strength of donors on the optoelectronic properties. The reverse intersystem crossing rate constant(kRISC) of the emitters having donors substituted at positions 11and 12 of the dibenzo[a,c]phenazine(BP) is more than 10-times faster than that of compounds substituted having donors substituted at positions 3 and 6. Compound 2DPACz BP, containing stronger donors than 2GCz BP, exhibits a red-shifted emission and smaller singlet-triplet energy splitting, ΔE_(ST), of 0.01 e V. The solution-processed OLED with 10 wt% 2DPACz BP doped in m CP emitted at 640 nm and showed a maximum external quantum efficiency(EQE_(max)) of 7.8%, which was effectively maintained out to a luminance of 1,000 cd m-2. Such a device's performance at relevant display luminance is among the highest for solution-processed red TADF OLEDs. The efficiency of the devices was improved significantly by using 4Cz IPN as an assistant dopant in a hyperfluorescence(HF) configuration, where the 2DPACz BP HF device shows an EQEmaxof 20.0% at λEL of 605 nm and remains high at 11.8% at a luminance of 1,000 cd m-2, which makes this device one of the highest efficiency orange-to-red HF SP-OLEDs to date.展开更多
All-solution-processed organic solar cells(OSCs)(from the bottom electrode to the top electrode)are highly attractive thanks to their low cost,lightweight and high-throughput production.However,achieving highly effici...All-solution-processed organic solar cells(OSCs)(from the bottom electrode to the top electrode)are highly attractive thanks to their low cost,lightweight and high-throughput production.However,achieving highly efficient all-solution-processed OSCs remains a significant challenge.One of the key issues is the lack of high-quality solution-processed electrode systems that can replace indium tin oxide(ITO)and vacuum-deposited metal electrodes.In this paper,we comprehensively review recent advances in all-solution-processed osCs,and classified the devices as the top electrode materials,including silver nanowires(AgNWs),conducting polymers and composite conducting materials.The correlation between electrode materials,properties of electrodes,and device performance in all-solution-processed OSCs is elucidated.In addition,the critical roles of the active layer and interface layer are also discussed.Finally,the prospects and challenges of all-solution-processed OSCs are presented.展开更多
All-inorganic cesium lead bromide(CsPbBr3)perovskite is attracting growing interest as functional materials in photovoltaics and other optoelectronic devices due to its superb stability.However,the fabrication of high...All-inorganic cesium lead bromide(CsPbBr3)perovskite is attracting growing interest as functional materials in photovoltaics and other optoelectronic devices due to its superb stability.However,the fabrication of high-quality CsPbBr3 films still remains a big challenge by solution-process because of the low solubility of the cesium precursor in common solvents.Herein,we report a facile solution-processed approach to prepare high-quality CsPbBr3 perovskite films via a two-step spin-coating method,in which the Cs Br methanol/H2 O mixed solvent solution is spin-coated onto the lead bromide films,followed by an isopropanol-assisted post-treatment to regulate the crystallization process and to control the film morphology.In this fashion,dense and uniform CsPbBr3 films are obtained consisting of large crystalline domains with sizes up to microns and low defect density.The effectiveness of the resulting CsPbBr3 films is further examined in perovskite solar cells(PSCs)with a simplified planar architecture of fluorine–doped tin oxide/compact Ti O2/CsPbBr3/carbon,which deliver a maximum power conversion efficiency of 8.11%together with excellent thermal and humidity stability.The present work offers a simple and effective strategy in fabrication of high-quality CsPbBr3 films for efficient and stable PSCs as well as other optoelectronic devices.展开更多
Solution-processed metal halide perovskites (MHPs) have received significant interest for cost-effective, high-performance optoelectronic devices. In addition to the great successes in photovoltaics, their excellent l...Solution-processed metal halide perovskites (MHPs) have received significant interest for cost-effective, high-performance optoelectronic devices. In addition to the great successes in photovoltaics, their excellent luminescence and charge transport properties also make them promising for light emitting diodes (LEDs). To achieve high-efficiency perovskite LEDs (PeLEDs), extensive efforts have been carried out to enhance radiative recombination rates by confining the electrons and holes. In addition to enhancing radiative recombination rates, it is equally important to decrease the non-radiative recombination for improving the device performance. Passivation of the defects could be an efficient way for reducing the non-radiative recombination.展开更多
Nonfullerene organic solar cells(OSCs)have achieved breakthrough with pushing the efficiency exceeding 17%.While this shed light on OSC commercialization,high-performance flexible OSCs should be pursued through soluti...Nonfullerene organic solar cells(OSCs)have achieved breakthrough with pushing the efficiency exceeding 17%.While this shed light on OSC commercialization,high-performance flexible OSCs should be pursued through solution manufacturing.Herein,we report a solution-processed flexible OSC based on a transparent conducting PEDOT:PSS anode doped with trifluoromethanesulfonic acid(CF3SO3H).Through a low-concentration and low-temperature CF3SO3H doping,the conducting polymer anodes exhibited a main sheet resistance of 35Ωsq−1(minimum value:32Ωsq−1),a raised work function(≈5.0 eV),a superior wettability,and a high electrical stability.The high work function minimized the energy level mismatch among the anodes,hole-transporting layers and electron-donors of the active layers,thereby leading to an enhanced carrier extraction.The solution-processed flexible OSCs yielded a record-high efficiency of 16.41%(maximum value:16.61%).Besides,the flexible OSCs afforded the 1000 cyclic bending tests at the radius of 1.5 mm and the long-time thermal treatments at 85°C,demonstrating a high flexibility and a good thermal stability.展开更多
Pb-Sn mixed perovskites are becoming increasingly popular as narrowbandgap(1.2–1.3 eV)light absorbers in single-junction perovskite solar cells(PSCs)and as bottom cells for all-perovskite tandem solar cells,for highe...Pb-Sn mixed perovskites are becoming increasingly popular as narrowbandgap(1.2–1.3 eV)light absorbers in single-junction perovskite solar cells(PSCs)and as bottom cells for all-perovskite tandem solar cells,for highefficiency,low-cost,lightweight,roll-to-roll printable photovoltaic(PV)applications.From the first report of planar Pb:Sn mixed PSCs in 2014,the power conversion efficiencies(PCE)have increased from 10%to 21%by the end of 2020 with an exponential growth in research conducted in this field.Despite much effort,the performance and stability of Pb-Sn mixed PSCs are still limited,which constrains their long-term use in all-perovskite tandem devices.This review highlights the avenues explored in improving different aspects of Pb-Sn mixed PSCs and provides a comprehensive discussion of the interdependent factors affecting the device performance.This includes compositional engineering of the perovskite crystal,absorber layer fabrication and crystallization methods,bandgap tuning,Sn4+reduction,and surface passivation of the absorber layer,as well as the selection of interlayers and electrodes of the final PSC.展开更多
Three polymer hosts(namely PNB-tBuCz,PNB-Ac,PNB-TAc)containing non-conjugated polynorbornene(PNB)backbone and hole-transporting arylamine segments(carbazole,acridan and dendritic teracridan)in side chains are develope...Three polymer hosts(namely PNB-tBuCz,PNB-Ac,PNB-TAc)containing non-conjugated polynorbornene(PNB)backbone and hole-transporting arylamine segments(carbazole,acridan and dendritic teracridan)in side chains are developed for solution-processed narrowband blue organic light-emitting diodes(OLEDs).It is found that the non-conjugated polynorbornenes can keep high triplet energy(ET)levels in range of 3.12-3.20 eV by interrupting the conjugation of repeating units,making them capable as host materials for blue emitters.Meanwhile,by increasing the electron-donating capability of side chain arylamine from carbazole to acridan and dendritic teracridan,the highest occupied molecular orbital(HOMO)levels for the polymer hosts are elevated from-5.50 eV to-5.11 eV,beneficial for reducing the hole injection barrier from anode to emissive layer.As a result,solution-processed OLEDs employing polynorbornenes with dendritic teracridan side chain(PNB-TAc)as host and boron,selenium,nitrogen-containing multiple resonance thermally activated delayed fluorescence emitter as dopant reveal efficient narrowband blue electroluminescence with emission peak at 474 nm,full-width at half maximum of 30 nm,together with maximum external quantum efficiency of 20.2%,representing the state-of-the-art device efficiency for solution-processed OLEDs with narrowband blue emission.展开更多
This work reports on the integration of organic and inorganic semiconductors as heterojunction active layers for high-performance ambipolar transistors and complementary metal-oxide-semiconductor(CMOS)-like inverters....This work reports on the integration of organic and inorganic semiconductors as heterojunction active layers for high-performance ambipolar transistors and complementary metal-oxide-semiconductor(CMOS)-like inverters.Pentacene is employed as a p-type organic semiconductor for its stable electrical performance,while the solution-processed scandium(Sc)substituted indium oxide(ScInO)is employed as an n-type inorganic semiconductor.It is observed that by regulating the doping concentration of Sc,the electrical performance of the n-type semiconductor could be well controlled to obtain a balance with the electrical performance of the p-type semiconductor,which is vital for achieving high-performance inverters.When the doping concentration of Sc is 10 at.%,the CMOS-like logic inverters exhibit a voltage gain larger than 80 and a wide noise margin(53%of the theoretical value).The inverters also respond well to the input signal with frequency up to 500 Hz.展开更多
Ionic thermally activated delayed fluorescence(TADF)emitters are rarely investigated due to their poor photoluminescence and electroluminescence performance.Herein,highly efficient ionic TADF emitters with charged do...Ionic thermally activated delayed fluorescence(TADF)emitters are rarely investigated due to their poor photoluminescence and electroluminescence performance.Herein,highly efficient ionic TADF emitters with charged donor–acceptor(D–A^(+))and D–A^(+)–D architectures are designed,innovatively based on the phosphonium cation electron acceptor.The symmetric D–A^(+)–D compound in doped film exhibits a high photoluminescence quantum yield of 0.91 and a short emission lifetime of 1.43 microseconds.Partially solution-processed organic lightemitting diodes based on these ionic TADF emitters achieve a maximum external quantum efficiency(EQE)of 18.3%and a peak luminance of 14,532 candelas per square meter(cd/m^(2))and show a small efficiency roll-off of 7.1%(EQE=17%)at a practical high luminance of 1000 cd/m^(2).These results demonstrate the high potential of phosphonium cations as promising electron acceptors to construct TADF emitters for high-performance electroluminescence devices.The current study opens up an appealing way for future exploitation of high-efficiency ionic TADF materials.展开更多
The evolution of lead halide perovskites used for X-ray imaging scintillators has been facilitated by the development of solution-processable semiconductors characterized by large-area,flexible,fast photoresponse.The ...The evolution of lead halide perovskites used for X-ray imaging scintillators has been facilitated by the development of solution-processable semiconductors characterized by large-area,flexible,fast photoresponse.The stability and durability of these new perovskites are insufficient to achieve extended computed tomography scanning times with hard X-rays.In this study,we fabricated a self-assembled CsPbBr_(3)-based scintillator film with a flexible large-area uniform thickness using a new roomtemperature solution-processable method.The sensitivity and responsivity of X-ray photon conversion were quantitatively measured and showed a good linear response relationship suitable for X-ray imaging.We also demonstrated,for the first time,that the self-assembled CsPbBr_(3)-based scintillator has good stability for hard X-ray microtomography.Therefore,such an inexpensive solution-processed semiconductor easily prepared at room temperature can be used as a hard X-ray scintillator and equipped with flexible CsPbBr3-based X-ray detectors.It has great potential in three-dimensional high-resolution phase-contrast X-ray-imaging applications in biomedicine and material science because of its heavy Pb and Br atoms.展开更多
High-efficiency thermally activated delayed fluorescence(TADF) emitters and corresponding well-designed solution-processed organic light emitting diodes(OLEDs) are presently attractive due to their potential for explo...High-efficiency thermally activated delayed fluorescence(TADF) emitters and corresponding well-designed solution-processed organic light emitting diodes(OLEDs) are presently attractive due to their potential for exploiting large-area flexible displays. In this context, we innovatively integrate 2,12-di-tert-butyl-5,9-dioxa-13b-boronaphtho [3,2,1] anthracene as the acceptor with 3,6-bis(3,6-di-tert-butylcarbazol-N-yl) carbazole as the donor to construct a rigid deep-blue emitter, TB-3t BuCz, which exhibits a narrow emission with full-width-at-half-maximum(FWHM) of 46 nm. TB-3t BuCz itself dispalys no TADF characteristics both in solution or in pure film states. However, the significant TADF behavior can be observed when TB-3t BuCz is doped with 2,6-DCzPPy host due to the formation of exciplex-like species in 2,6-DCzPPy/TB-3t BuCz system. It is also found that the discernible spin-flip of triplet excitons is feasible when the S1/T1states of the formed exciplex stay slightly lower than S1 and T1states of TB-3t BuCz for the other host/TB-3t BuCz systems. Eventually, thanks to the synergetic effect of rigid structure and favorable photophysical properties of TB-3t BuCz, the solution-processed OLEDs based on 2,6-DCzPPy/TB-3t BuCz as emitting layer has achieved the significantly improved external quantum efficiency(EQE) of 14.6% with suppressed efficiency roll-off.The CIE1931 coordinate of(0.158, 0.052) is typically in deep-blue region. Note that, this EQE value is among the highest echelon of solution-processed OLEDs with deep-blue emission by utilizing boron-containing TADF emitters.展开更多
A solution-processed CuOx film has been successfully integrated as the hole-transporting layer(HTL) for inverted planar heterojunction perovskite solar cells(PVSCs). The CuOx layer is fabricated by simply spin-coa...A solution-processed CuOx film has been successfully integrated as the hole-transporting layer(HTL) for inverted planar heterojunction perovskite solar cells(PVSCs). The CuOx layer is fabricated by simply spin-coating a copper acetylacetonate(Cu(acac)2) chloroform solution onto ITO glass with high transparency in the visible range. The compact and pinhole-free perovskite film with large grain domains is grown on the CuOx film. The inverted PVSCs with the structure of ITO/CuOx/MAPbI3/PC(61)BM/ZnO/Al are fabricated and show a best PCE of 17.43% under standard AM 1.5G simulated solar irradiation with a VOCof 1.03 V, aJ(SC) of 22.42 mA cm^(-2), and a fill factor of 0.76, which is significantly higher and more stable than that fabricated from the often used hole-transporting material PEDOT:PSS(11.98%) under the same experimental conditions. The enhanced performance is attributed to the efficient hole extraction through the CuOx layer as well as the high-quality CH3NH3PbI3 films grown on the CuOx. Our results indicate that low-cost and solution-processed CuOx film is a promising HTL for high performance PVSCs with better stability.展开更多
With excellent color purity(full-width half maximum(FWHM)<40 nm)and high quantum yield,multiresonance(MR)molecules can harvest both singlet and triplet excitons for highly efficient narrowband organic light-emittin...With excellent color purity(full-width half maximum(FWHM)<40 nm)and high quantum yield,multiresonance(MR)molecules can harvest both singlet and triplet excitons for highly efficient narrowband organic light-emitting diodes(OLEDs)owing to their thermally activated delayed fluorescence(TADF)nature.However,the highly rigid molecular skeleton with the oppositely positioned bo ron and nitrogen in generating MR effects results in the intrinsic difficulties in the solution-processing of MR-OLEDs.Here,we demonstrate a facile strategy to increase the solubility,enhance the efficiencies and modulate emission color of MR-TADF molecules by extending aromatic rings and introducing tert-butyls into the MR backbone.Two MR-TADF emitters with smaller singlet-triplet splitting energies(ΔE~(ST))and larger oscillator strengths were prepared conveniently,and the solution-processed MR-OLEDs were fabricated for the first time,exhibiting efficient bluish-green electroluminescence with narrow FWHM of 32 nm and external quantum efficiency of 16.3%,which are even comparable to the state-of-the-art performances of the vacuum-evaporated devices.These results prove the feasibility of designing efficient solutionprocessible MR molecules,offering important clues in developing high-performance solution-processed MR-OLEDs with high efficiency and color purity.展开更多
The development of alternative low-cost and high-performing hole-transporting materials(HTMs) is of great significance for the potential large-scale application of perovskite solar cells(PSCs) in the future.Here,a fac...The development of alternative low-cost and high-performing hole-transporting materials(HTMs) is of great significance for the potential large-scale application of perovskite solar cells(PSCs) in the future.Here,a facilely synthesized solution-processable copper tetra-(2,4-dimethyl-3-pentoxy) phthalocyanine(CuPc-DMP) via only two simple steps,has been incorporated as a hole-transporting material(HTM) in mesoscopic perovskite solar cells(PSCs).The optimized devices based on such a HTM afford a very competitive power conversion efficiency(PCE) of up to 17.1%measured at 100 mW cm^(-2) AM 1.5G irradiation,which is on par with that of the well-known 2,2',7,7'-tetrakis(N'N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene(spiro-OMeTAD)(16.7%) under equivalent conditions.This is,to the best of our knowledge,the highest value reported so far for metal organic complex-based HTMs in PSCs.The advantages of this HTM observed,such as facile synthetic procedure,superior hole transport characteristic,high photovoltaic performance together with the feasibility of tailoring the molecular structure would make solution-processable copper phthalocyanines as a class of promising HTM that can be further explored in PSCs.The present finding highlights the potential application of solution processed metal organic complexes as HTMs for cost-effective and high-performing PSCs.展开更多
Smart materials,such as stimuli-responsive luminescence,have attracted much attentions due to their potential application in semiconductor filed.In this context,platinum complexes of(dfppy-DC)Pt(acac) and(dfppy-O-DC)P...Smart materials,such as stimuli-responsive luminescence,have attracted much attentions due to their potential application in semiconductor filed.In this context,platinum complexes of(dfppy-DC)Pt(acac) and(dfppy-O-DC)Pt(acac) were prepared and characterized,in which(2-(4',6'-difluorophenyl)pyridinato-N,C2')(2,4-pentanedionato-0,0)Pt(Ⅱ) was used as the planar emission core and 9-(4-(phenylsulfonyl)phenyl)-9 H-carbazole(DC) was regard as the bent pendent.Both platinum complexes showed bright emission in solution and solid state,concomitant with charming external-stimuli-responsive emission under mechanical grinding,organic solvent vapors and pressure.The change emission color spanned from yellow to near-infrared region.Using the platinum complexes as the dopant,solution processable organic light-emitting diodes(OLEDs) were fabricated and a maximum external quantum efficiency of ~18% was achieved,which is the highest value among the reported solution-processable OLEDs based on externalstimuli-responsive luminescence.This research demonstrated that platinum complex can show promising stimuli responsive emission via ingenious molecular design,indicating a novel way for developing the smart materials in semiconductor filed.展开更多
Perovskite solar cells could strongly compete with the silicon solar cells in the market soon as illustrated in recent studies.In this work,promising and stable metal-free perovskite solar cells(PSCs)has been successf...Perovskite solar cells could strongly compete with the silicon solar cells in the market soon as illustrated in recent studies.In this work,promising and stable metal-free perovskite solar cells(PSCs)has been successfully fabricated using an inorganic SnO_(2)/Quantum dot SnO_(2)(QD-SnO_(2))double layer as an efficient electron transport layer via a low-temperature solution process.The fully-air fabricated PSCs in the form of FTO/SnO_(2)/QD-SnO_(2)/CH3NH3PbI3/Carbon were tested at different annealed QD-SnO_(2) between 300 and 500℃.The as-prepared QD-SnO_(2) and the fabricated devices are characterized by various techniques,including XRD,XPS,HR-TEM,FE-SEM,UVeviseNIR spectroscopy,PL,and solar simulator.The prepared QD-SnO_(2) at 300℃ has shown well-ordered nanoparticles of 5.6 nm in diameter with superior carrier density(1.5×10^(15) cm^(-3))and highest carrier mobility(64.1 cm^(2)·V^(-1)·s^(-1)),accelerating the carriers separation process within the cell.The best devices demonstrated a maximum power conversion effi-ciency(PCE)of 11.7%,VOC 0.81 V,JSC 19.5 mA·cm^(-2),and FF 74%.The presence of an interfacial layer of QDSnO_(2) over the blocking SnO_(2) upsurges the band gaps alignment and accelerates the carriers extraction rate affecting the performance of the fabricated perovskite devices.Moreover,the optimized fabricated devices revealed a shelf stability-life of four months in humid air(40%-50%)with>83%of its initial PCE.This simple synthetic approach can develop the opportunities to transfer the cell from the lab to the market,which will be compatible with large-scale production.展开更多
基金Research funding from the Shanghai Municipal Education Commission in the framework of the oriental scholar and distinguished professor designationfunding from the National Natural Science Foundation of China(NSFC)
文摘Thin films and thin film devices have a ubiquitous presence in numerous conventional and emerging technologies. This is because of the recent advances in nanotechnology, the development of functional and smart materials,conducting polymers, molecular semiconductors, carbon nanotubes, and graphene, and the employment of unique properties of thin films and ultrathin films, such as high surface area, controlled nanostructure for effective charge transfer, and special physical and chemical properties, to develop new thin film devices. This paper is therefore intended to provide a concise critical review and research directions on most thin film devices, including thin film transistors, data storage memory, solar cells, organic light-emitting diodes, thermoelectric devices, smart materials, sensors, and actuators. The thin film devices may consist of organic, inorganic, and composite thin layers, and share similar functionality, properties, and fabrication routes. Therefore, due to the multidisciplinary nature of thin film devices, knowledge and advances already made in one area may be applicable to other similar areas. Owing to the importance of developing low-cost, scalable, and vacuum-free fabrication routes, this paper focuses on thin film devices that may be processed and deposited from solution.
基金supported by National Natural Science Foundation of China (61861136004)the National Key R&D Program of China (2016YFB0402705)+1 种基金the Innovation Fund of WNLOProgram for HUST Academic Frontier Youth Team (2018QYTD06)
文摘Wearable smart sensors are considered to be the new generation of personal portable devices for health monitoring.By attaching to the skin surface,these sensors are closely related to body signals(such as heart rate,blood oxygen saturation,breath markers,etc.)and ambient signals(such as ultraviolet radiation,inflammable and explosive,toxic and harmful gases),thus providing new opportunities for human activity monitoring and personal telemedicine care.Here we focus on photodetectors and gas sensors built from metal chalcogenide,which have made great progress in recent years.Firstly,we present an overview of healthcare applications based on photodetectors and gas sensors,and discuss the requirement associated with these applications in detail.We then discuss advantages and properties of solution-processable metal chalcogenides,followed by some recent achievements in health monitoring with photodetectors and gas sensors based on metal chalcogenides.Last we present further research directions and challenges to develop an integrated wearable platform for monitoring human activity and personal healthcare.
基金We thank the National Natural Science Foundation of China(No.51973122)for financial support.
文摘Solution processability and flexibility still remain major challenges for many thermoelectric(TE)materials,including bismuth telluride(Bi_(2)Te_(3)),a typical and commercially available TE material.Here,we report a new solutionprocessed method to prepare a flexible film of a Bi_(2)Te_(3)/single-walled carbon nanotube(SWCNT)hybrid,where the dissolved Bi_(2)Te_(3) ion precursors are mixed with dispersed SWCNTs in solution and recrystallized on the SWCNT surfaces to form a“cement-rebar”-like architecture.The hybrid film shows an n-type characteristic,with a stable Seebeck coefficient of^(−1)00.00±1.69μVK^(−1) in air.Furthermore,an extremely low in-plane thermal conductivity of∼0.33Wm^(−1) K^(−1) is achieved at 300 K,and the figure of merit(ZT)reaches 0.47±0.02.In addition,the TE performance is independent of mechanical bending.The unique“cement-rebar”-like architecture is believed to be responsible for the excellent TE performances and the high flexibility.The results provide a new avenue for the fabrication of solution-processable and flexible TE hybrid films and will speed up the applications of flexible electronics and energy conversion.
基金Supported by the National Natural Science Foundation of China under Grant No 61177028
文摘Polymer field-effect transistors operated in the n-channel model with a top-gate/bottom-contact are processed using a solution method. The transistor performance depends on the gate dielectric layer. A high performance polymer transistor is achieved, with the saturated electron mobility of about 0.46cm2/Vs, threshold voltage nearly 0 V and subthreshold sway of about 0.9 V/decade, employing a polystyrene (PS) dielectric layer. The transistor performances are further improved with increasing current and lower operation voltages by utilizing a bi-layer gate dielectric, comprising a thin PS dielectric layer adjacent to the semiconductor to minimize the density of the interface traps for obtaining a small VT, a large μ and a poly(methyl methacrylate) (PMMA) dielectric layer with a relatively high-k adjacent to the gate electrode for enlarging the capacitance, processed from the orthogonal solvents.
基金the China Scholarship Council(201806890001)support from the Royal Academy of Engineering Enterprise Fellowship (EF2122-13106)EPSRC (EP/W015137/1, EP/W524505/1) for financial support。
文摘The development of high-performance solution-processed red organic light-emitting diodes(OLEDs) remains a challenge,particularly in terms of maintaining efficiency at high luminance. Here, we designed and synthesized four novel orange-red thermally activated delayed fluorescence(TADF) dendrimers that are solution-processable: 2GCz BP, 2DPACz BP, 2FBP2GCz and 2FBP2DPACz. We systematically investigated the effect of substitution position and strength of donors on the optoelectronic properties. The reverse intersystem crossing rate constant(kRISC) of the emitters having donors substituted at positions 11and 12 of the dibenzo[a,c]phenazine(BP) is more than 10-times faster than that of compounds substituted having donors substituted at positions 3 and 6. Compound 2DPACz BP, containing stronger donors than 2GCz BP, exhibits a red-shifted emission and smaller singlet-triplet energy splitting, ΔE_(ST), of 0.01 e V. The solution-processed OLED with 10 wt% 2DPACz BP doped in m CP emitted at 640 nm and showed a maximum external quantum efficiency(EQE_(max)) of 7.8%, which was effectively maintained out to a luminance of 1,000 cd m-2. Such a device's performance at relevant display luminance is among the highest for solution-processed red TADF OLEDs. The efficiency of the devices was improved significantly by using 4Cz IPN as an assistant dopant in a hyperfluorescence(HF) configuration, where the 2DPACz BP HF device shows an EQEmaxof 20.0% at λEL of 605 nm and remains high at 11.8% at a luminance of 1,000 cd m-2, which makes this device one of the highest efficiency orange-to-red HF SP-OLEDs to date.
基金the National Natural Science Foundation of China(52103221,52172048,22205130,52063010)Shandong Provincial Natural Science Foundation(ZR2021QB179,ZR2021QB024,ZR2021ZD06)+2 种基金Guangdong Natural Science Foundation of China(2023A1515012323,2023A1515010943,2022A1515110643)the National Key Research and Development Program of China(2022YFB4200400)funded by M0STthe Fundamental Research Funds of Shandong University.
文摘All-solution-processed organic solar cells(OSCs)(from the bottom electrode to the top electrode)are highly attractive thanks to their low cost,lightweight and high-throughput production.However,achieving highly efficient all-solution-processed OSCs remains a significant challenge.One of the key issues is the lack of high-quality solution-processed electrode systems that can replace indium tin oxide(ITO)and vacuum-deposited metal electrodes.In this paper,we comprehensively review recent advances in all-solution-processed osCs,and classified the devices as the top electrode materials,including silver nanowires(AgNWs),conducting polymers and composite conducting materials.The correlation between electrode materials,properties of electrodes,and device performance in all-solution-processed OSCs is elucidated.In addition,the critical roles of the active layer and interface layer are also discussed.Finally,the prospects and challenges of all-solution-processed OSCs are presented.
基金financial support by the National Natural Science Foundation of China(21975038,21606039,and 51661135021)the Swiss National Science Foundation(IZLCZ2_170177)+3 种基金the Fundamental Research Funds for the Central Universities(DUT17JC39)the Swedish Foundation for Strategic Research(SSF)the Swedish Energy Agencythe Knut and Alice Wallenberg Foundation。
文摘All-inorganic cesium lead bromide(CsPbBr3)perovskite is attracting growing interest as functional materials in photovoltaics and other optoelectronic devices due to its superb stability.However,the fabrication of high-quality CsPbBr3 films still remains a big challenge by solution-process because of the low solubility of the cesium precursor in common solvents.Herein,we report a facile solution-processed approach to prepare high-quality CsPbBr3 perovskite films via a two-step spin-coating method,in which the Cs Br methanol/H2 O mixed solvent solution is spin-coated onto the lead bromide films,followed by an isopropanol-assisted post-treatment to regulate the crystallization process and to control the film morphology.In this fashion,dense and uniform CsPbBr3 films are obtained consisting of large crystalline domains with sizes up to microns and low defect density.The effectiveness of the resulting CsPbBr3 films is further examined in perovskite solar cells(PSCs)with a simplified planar architecture of fluorine–doped tin oxide/compact Ti O2/CsPbBr3/carbon,which deliver a maximum power conversion efficiency of 8.11%together with excellent thermal and humidity stability.The present work offers a simple and effective strategy in fabrication of high-quality CsPbBr3 films for efficient and stable PSCs as well as other optoelectronic devices.
文摘Solution-processed metal halide perovskites (MHPs) have received significant interest for cost-effective, high-performance optoelectronic devices. In addition to the great successes in photovoltaics, their excellent luminescence and charge transport properties also make them promising for light emitting diodes (LEDs). To achieve high-efficiency perovskite LEDs (PeLEDs), extensive efforts have been carried out to enhance radiative recombination rates by confining the electrons and holes. In addition to enhancing radiative recombination rates, it is equally important to decrease the non-radiative recombination for improving the device performance. Passivation of the defects could be an efficient way for reducing the non-radiative recombination.
基金The authors acknowledge funding from the National Natural Science Foundation of China(61974150 and 51773213)Key Research Program of Frontier Sciences,CAS(QYZDB-SSW-JSC047)+1 种基金the Fundamental Research Funds for the Central Universities,the CAS-EU S&T cooperation partner program(174433KYSB20150013)the Natural Science Foundation of Ningbo(2018A610135).
文摘Nonfullerene organic solar cells(OSCs)have achieved breakthrough with pushing the efficiency exceeding 17%.While this shed light on OSC commercialization,high-performance flexible OSCs should be pursued through solution manufacturing.Herein,we report a solution-processed flexible OSC based on a transparent conducting PEDOT:PSS anode doped with trifluoromethanesulfonic acid(CF3SO3H).Through a low-concentration and low-temperature CF3SO3H doping,the conducting polymer anodes exhibited a main sheet resistance of 35Ωsq−1(minimum value:32Ωsq−1),a raised work function(≈5.0 eV),a superior wettability,and a high electrical stability.The high work function minimized the energy level mismatch among the anodes,hole-transporting layers and electron-donors of the active layers,thereby leading to an enhanced carrier extraction.The solution-processed flexible OSCs yielded a record-high efficiency of 16.41%(maximum value:16.61%).Besides,the flexible OSCs afforded the 1000 cyclic bending tests at the radius of 1.5 mm and the long-time thermal treatments at 85°C,demonstrating a high flexibility and a good thermal stability.
基金R.M.I.B.and S.M.S.gratefully acknowledge support from the University of Surrey scholarshipsR.M.I.B.,R.A.S.,C.C.L.U.,and S.R.P.S.also acknowledge funding from EPSRC(EP/R028559/1 and GR/1922310/1)+1 种基金S.M.S.and S.R.P.S acknowledge support SilverRay Ltd.K.D.G.I.J.and S.R.P.S.gratefully acknowledgefinancial support from the Equality Foundation of Hong Kong.
文摘Pb-Sn mixed perovskites are becoming increasingly popular as narrowbandgap(1.2–1.3 eV)light absorbers in single-junction perovskite solar cells(PSCs)and as bottom cells for all-perovskite tandem solar cells,for highefficiency,low-cost,lightweight,roll-to-roll printable photovoltaic(PV)applications.From the first report of planar Pb:Sn mixed PSCs in 2014,the power conversion efficiencies(PCE)have increased from 10%to 21%by the end of 2020 with an exponential growth in research conducted in this field.Despite much effort,the performance and stability of Pb-Sn mixed PSCs are still limited,which constrains their long-term use in all-perovskite tandem devices.This review highlights the avenues explored in improving different aspects of Pb-Sn mixed PSCs and provides a comprehensive discussion of the interdependent factors affecting the device performance.This includes compositional engineering of the perovskite crystal,absorber layer fabrication and crystallization methods,bandgap tuning,Sn4+reduction,and surface passivation of the absorber layer,as well as the selection of interlayers and electrodes of the final PSC.
基金This work was supported by the National Natural Science Foundation of China(Nos.52073282,52122309,21975247,51833009,52261135541)the CAS-Croucher Funding Scheme for Joint Laboratories,the Open Project of the State Key Laboratory of Supramolecular Structure and Materials,China(No.sklssm2023019)the Start-up Scientific Research Foundation from Hainan University,China[No.KYQD(ZR)22174]。
文摘Three polymer hosts(namely PNB-tBuCz,PNB-Ac,PNB-TAc)containing non-conjugated polynorbornene(PNB)backbone and hole-transporting arylamine segments(carbazole,acridan and dendritic teracridan)in side chains are developed for solution-processed narrowband blue organic light-emitting diodes(OLEDs).It is found that the non-conjugated polynorbornenes can keep high triplet energy(ET)levels in range of 3.12-3.20 eV by interrupting the conjugation of repeating units,making them capable as host materials for blue emitters.Meanwhile,by increasing the electron-donating capability of side chain arylamine from carbazole to acridan and dendritic teracridan,the highest occupied molecular orbital(HOMO)levels for the polymer hosts are elevated from-5.50 eV to-5.11 eV,beneficial for reducing the hole injection barrier from anode to emissive layer.As a result,solution-processed OLEDs employing polynorbornenes with dendritic teracridan side chain(PNB-TAc)as host and boron,selenium,nitrogen-containing multiple resonance thermally activated delayed fluorescence emitter as dopant reveal efficient narrowband blue electroluminescence with emission peak at 474 nm,full-width at half maximum of 30 nm,together with maximum external quantum efficiency of 20.2%,representing the state-of-the-art device efficiency for solution-processed OLEDs with narrowband blue emission.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61574003 and 61774010)Shenzhen Municipal Scientific Program,China(Grant Nos.GGFW20170728163447038 and JCYJ20180504165449640).
文摘This work reports on the integration of organic and inorganic semiconductors as heterojunction active layers for high-performance ambipolar transistors and complementary metal-oxide-semiconductor(CMOS)-like inverters.Pentacene is employed as a p-type organic semiconductor for its stable electrical performance,while the solution-processed scandium(Sc)substituted indium oxide(ScInO)is employed as an n-type inorganic semiconductor.It is observed that by regulating the doping concentration of Sc,the electrical performance of the n-type semiconductor could be well controlled to obtain a balance with the electrical performance of the p-type semiconductor,which is vital for achieving high-performance inverters.When the doping concentration of Sc is 10 at.%,the CMOS-like logic inverters exhibit a voltage gain larger than 80 and a wide noise margin(53%of the theoretical value).The inverters also respond well to the input signal with frequency up to 500 Hz.
基金This research was made possible as a result of a generous grant from the Key Research Program of Frontier Science,the Chinese Academy of Sciences(CAS)(grant no.QYZDJ-SSW-SLH033)the National Natural Science Foundation of China(grant no.52073286)+3 种基金the Natural Science Foundation of Fujian Province(grant no.2006L2005)the Fujian Science and Technology Innovation Laboratory for Optoelectronic Information of China(grant nos.2021ZR132 and 2021ZZ115)the Youth Innovation Foundation of Xiamen City(grant nos.3502Z20206082 and 3502Z20206083)the Major Research Project of Xiamen(grant no.3502Z20191015).
文摘Ionic thermally activated delayed fluorescence(TADF)emitters are rarely investigated due to their poor photoluminescence and electroluminescence performance.Herein,highly efficient ionic TADF emitters with charged donor–acceptor(D–A^(+))and D–A^(+)–D architectures are designed,innovatively based on the phosphonium cation electron acceptor.The symmetric D–A^(+)–D compound in doped film exhibits a high photoluminescence quantum yield of 0.91 and a short emission lifetime of 1.43 microseconds.Partially solution-processed organic lightemitting diodes based on these ionic TADF emitters achieve a maximum external quantum efficiency(EQE)of 18.3%and a peak luminance of 14,532 candelas per square meter(cd/m^(2))and show a small efficiency roll-off of 7.1%(EQE=17%)at a practical high luminance of 1000 cd/m^(2).These results demonstrate the high potential of phosphonium cations as promising electron acceptors to construct TADF emitters for high-performance electroluminescence devices.The current study opens up an appealing way for future exploitation of high-efficiency ionic TADF materials.
基金supported by National Natural Science Foundation of China (No. 12175127)Natural Science Foundation of Shandong Province,China (No. ZR2020MA088)
文摘The evolution of lead halide perovskites used for X-ray imaging scintillators has been facilitated by the development of solution-processable semiconductors characterized by large-area,flexible,fast photoresponse.The stability and durability of these new perovskites are insufficient to achieve extended computed tomography scanning times with hard X-rays.In this study,we fabricated a self-assembled CsPbBr_(3)-based scintillator film with a flexible large-area uniform thickness using a new roomtemperature solution-processable method.The sensitivity and responsivity of X-ray photon conversion were quantitatively measured and showed a good linear response relationship suitable for X-ray imaging.We also demonstrated,for the first time,that the self-assembled CsPbBr_(3)-based scintillator has good stability for hard X-ray microtomography.Therefore,such an inexpensive solution-processed semiconductor easily prepared at room temperature can be used as a hard X-ray scintillator and equipped with flexible CsPbBr3-based X-ray detectors.It has great potential in three-dimensional high-resolution phase-contrast X-ray-imaging applications in biomedicine and material science because of its heavy Pb and Br atoms.
基金supported by the National Natural Science Foundation of China(52103220,51922021,52273164)the Shandong Provincial Natural Science Foundation(ZR2022ZD37,ZR2019ZD50).
文摘High-efficiency thermally activated delayed fluorescence(TADF) emitters and corresponding well-designed solution-processed organic light emitting diodes(OLEDs) are presently attractive due to their potential for exploiting large-area flexible displays. In this context, we innovatively integrate 2,12-di-tert-butyl-5,9-dioxa-13b-boronaphtho [3,2,1] anthracene as the acceptor with 3,6-bis(3,6-di-tert-butylcarbazol-N-yl) carbazole as the donor to construct a rigid deep-blue emitter, TB-3t BuCz, which exhibits a narrow emission with full-width-at-half-maximum(FWHM) of 46 nm. TB-3t BuCz itself dispalys no TADF characteristics both in solution or in pure film states. However, the significant TADF behavior can be observed when TB-3t BuCz is doped with 2,6-DCzPPy host due to the formation of exciplex-like species in 2,6-DCzPPy/TB-3t BuCz system. It is also found that the discernible spin-flip of triplet excitons is feasible when the S1/T1states of the formed exciplex stay slightly lower than S1 and T1states of TB-3t BuCz for the other host/TB-3t BuCz systems. Eventually, thanks to the synergetic effect of rigid structure and favorable photophysical properties of TB-3t BuCz, the solution-processed OLEDs based on 2,6-DCzPPy/TB-3t BuCz as emitting layer has achieved the significantly improved external quantum efficiency(EQE) of 14.6% with suppressed efficiency roll-off.The CIE1931 coordinate of(0.158, 0.052) is typically in deep-blue region. Note that, this EQE value is among the highest echelon of solution-processed OLEDs with deep-blue emission by utilizing boron-containing TADF emitters.
基金supported by the Major State Basic Research Development Program (No. 2014CB643503)the National Science Foundation for Post-doctoral Scientists of China (No. 2015M580512)partly supported by the program for Innovative Research Team in University of Ministry of Education of China (No. IRT13R54)
文摘A solution-processed CuOx film has been successfully integrated as the hole-transporting layer(HTL) for inverted planar heterojunction perovskite solar cells(PVSCs). The CuOx layer is fabricated by simply spin-coating a copper acetylacetonate(Cu(acac)2) chloroform solution onto ITO glass with high transparency in the visible range. The compact and pinhole-free perovskite film with large grain domains is grown on the CuOx film. The inverted PVSCs with the structure of ITO/CuOx/MAPbI3/PC(61)BM/ZnO/Al are fabricated and show a best PCE of 17.43% under standard AM 1.5G simulated solar irradiation with a VOCof 1.03 V, aJ(SC) of 22.42 mA cm^(-2), and a fill factor of 0.76, which is significantly higher and more stable than that fabricated from the often used hole-transporting material PEDOT:PSS(11.98%) under the same experimental conditions. The enhanced performance is attributed to the efficient hole extraction through the CuOx layer as well as the high-quality CH3NH3PbI3 films grown on the CuOx. Our results indicate that low-cost and solution-processed CuOx film is a promising HTL for high performance PVSCs with better stability.
基金supported by the National Natural Science Foundation of China(Nos.21772095,91833306,51873159,91956107,61875090 and 21674049)1311 Talents Program of Nanjing University of Posts and Telecommunications(Dingshan),the Six Talent Plan(No.2016XCL050)+3 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD,No.YX030003)China Postdoctoral Science Foundation(No.2020M671460)Jiangsu Planned Projects for Postdoctoral Research Funds(No.20202137)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.46030CX17761)。
文摘With excellent color purity(full-width half maximum(FWHM)<40 nm)and high quantum yield,multiresonance(MR)molecules can harvest both singlet and triplet excitons for highly efficient narrowband organic light-emitting diodes(OLEDs)owing to their thermally activated delayed fluorescence(TADF)nature.However,the highly rigid molecular skeleton with the oppositely positioned bo ron and nitrogen in generating MR effects results in the intrinsic difficulties in the solution-processing of MR-OLEDs.Here,we demonstrate a facile strategy to increase the solubility,enhance the efficiencies and modulate emission color of MR-TADF molecules by extending aromatic rings and introducing tert-butyls into the MR backbone.Two MR-TADF emitters with smaller singlet-triplet splitting energies(ΔE~(ST))and larger oscillator strengths were prepared conveniently,and the solution-processed MR-OLEDs were fabricated for the first time,exhibiting efficient bluish-green electroluminescence with narrow FWHM of 32 nm and external quantum efficiency of 16.3%,which are even comparable to the state-of-the-art performances of the vacuum-evaporated devices.These results prove the feasibility of designing efficient solutionprocessible MR molecules,offering important clues in developing high-performance solution-processed MR-OLEDs with high efficiency and color purity.
基金supported by the National Natural Science Foundation of China(21606039,21120102036,91233201)the National Basic Research Program of China(2014CB239402)+2 种基金the Swedish Energy Agencythe KnutAlice Wallenberg Foundatioa
文摘The development of alternative low-cost and high-performing hole-transporting materials(HTMs) is of great significance for the potential large-scale application of perovskite solar cells(PSCs) in the future.Here,a facilely synthesized solution-processable copper tetra-(2,4-dimethyl-3-pentoxy) phthalocyanine(CuPc-DMP) via only two simple steps,has been incorporated as a hole-transporting material(HTM) in mesoscopic perovskite solar cells(PSCs).The optimized devices based on such a HTM afford a very competitive power conversion efficiency(PCE) of up to 17.1%measured at 100 mW cm^(-2) AM 1.5G irradiation,which is on par with that of the well-known 2,2',7,7'-tetrakis(N'N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene(spiro-OMeTAD)(16.7%) under equivalent conditions.This is,to the best of our knowledge,the highest value reported so far for metal organic complex-based HTMs in PSCs.The advantages of this HTM observed,such as facile synthetic procedure,superior hole transport characteristic,high photovoltaic performance together with the feasibility of tailoring the molecular structure would make solution-processable copper phthalocyanines as a class of promising HTM that can be further explored in PSCs.The present finding highlights the potential application of solution processed metal organic complexes as HTMs for cost-effective and high-performing PSCs.
基金Financial support was from the National Natural Science Foundation of China(Nos.51773021,51911530197,U1663229)Six Talent Peaks Project in Jiangsu Province(No.XCL-102)the Talent Project of Jiangsu Specially-Appointed Professor,Natural Science Fund for Colleges and Universities in Jiangsu Province(No.19KJA430002)。
文摘Smart materials,such as stimuli-responsive luminescence,have attracted much attentions due to their potential application in semiconductor filed.In this context,platinum complexes of(dfppy-DC)Pt(acac) and(dfppy-O-DC)Pt(acac) were prepared and characterized,in which(2-(4',6'-difluorophenyl)pyridinato-N,C2')(2,4-pentanedionato-0,0)Pt(Ⅱ) was used as the planar emission core and 9-(4-(phenylsulfonyl)phenyl)-9 H-carbazole(DC) was regard as the bent pendent.Both platinum complexes showed bright emission in solution and solid state,concomitant with charming external-stimuli-responsive emission under mechanical grinding,organic solvent vapors and pressure.The change emission color spanned from yellow to near-infrared region.Using the platinum complexes as the dopant,solution processable organic light-emitting diodes(OLEDs) were fabricated and a maximum external quantum efficiency of ~18% was achieved,which is the highest value among the reported solution-processable OLEDs based on externalstimuli-responsive luminescence.This research demonstrated that platinum complex can show promising stimuli responsive emission via ingenious molecular design,indicating a novel way for developing the smart materials in semiconductor filed.
基金supported by the Academy of Scientific Research and Technology(ASRT),Program of Scientists for Next Generation under grant no.(SNG-5),Egypt.supported by Science,Technology&Innovation Funding Authority(STDF)under grant no.(25522)supported by US-Egypt Joint project Cycle 17 no.229.
文摘Perovskite solar cells could strongly compete with the silicon solar cells in the market soon as illustrated in recent studies.In this work,promising and stable metal-free perovskite solar cells(PSCs)has been successfully fabricated using an inorganic SnO_(2)/Quantum dot SnO_(2)(QD-SnO_(2))double layer as an efficient electron transport layer via a low-temperature solution process.The fully-air fabricated PSCs in the form of FTO/SnO_(2)/QD-SnO_(2)/CH3NH3PbI3/Carbon were tested at different annealed QD-SnO_(2) between 300 and 500℃.The as-prepared QD-SnO_(2) and the fabricated devices are characterized by various techniques,including XRD,XPS,HR-TEM,FE-SEM,UVeviseNIR spectroscopy,PL,and solar simulator.The prepared QD-SnO_(2) at 300℃ has shown well-ordered nanoparticles of 5.6 nm in diameter with superior carrier density(1.5×10^(15) cm^(-3))and highest carrier mobility(64.1 cm^(2)·V^(-1)·s^(-1)),accelerating the carriers separation process within the cell.The best devices demonstrated a maximum power conversion effi-ciency(PCE)of 11.7%,VOC 0.81 V,JSC 19.5 mA·cm^(-2),and FF 74%.The presence of an interfacial layer of QDSnO_(2) over the blocking SnO_(2) upsurges the band gaps alignment and accelerates the carriers extraction rate affecting the performance of the fabricated perovskite devices.Moreover,the optimized fabricated devices revealed a shelf stability-life of four months in humid air(40%-50%)with>83%of its initial PCE.This simple synthetic approach can develop the opportunities to transfer the cell from the lab to the market,which will be compatible with large-scale production.