By means of the modified Clarkson and Kruskal (CK) direct method and the variable separation approach, we investigate the (24-1)-dimensional Ito equation which was constructed by Ito in 1980. The full symmetry gro...By means of the modified Clarkson and Kruskal (CK) direct method and the variable separation approach, we investigate the (24-1)-dimensional Ito equation which was constructed by Ito in 1980. The full symmetry group with the Kac-Moody-Virasoro algebra structure and the variable separation solutions are obtained. By selecting appropriate arbitrary functions, some special soliton excitations are shown graphically. The results presented here would be beneficial for understanding the (2-t-1)-dimensional Ito equation better.展开更多
This paper aims at analyzing the shapes of the bounded traveling wave solu- tions for a class of nonlinear wave equation with a quintic term and obtaining its damped oscillatory solutions. The theory and method of pla...This paper aims at analyzing the shapes of the bounded traveling wave solu- tions for a class of nonlinear wave equation with a quintic term and obtaining its damped oscillatory solutions. The theory and method of planar dynamical systems are used to make a qualitative analysis to the planar dynamical system which the bounded traveling wave solutions of this equation correspond to. The shapes, existent number, and condi- tions are presented for all bounded traveling wave solutions. The bounded traveling wave solutions are obtained by the undetermined coefficients method according to their shapes, including exact expressions of bell and kink profile solitary wave solutions and approxi- mate expressions of damped oscillatory solutions. For the approximate damped oscillatory solution, using the homogenization principle, its error estimate is given by establishing the integral equation, which reflects the relation between the exact and approximate so- lutions. It can be seen that the error is infinitesimal decreasing in the exponential form.展开更多
An approximate analytical model for calculating the pull-in voltage of a stepped cantilever-type radio frequency (RF) micro electro-mechanical system (MEMS) switch is developed based on the Euler-Bernoulli beam an...An approximate analytical model for calculating the pull-in voltage of a stepped cantilever-type radio frequency (RF) micro electro-mechanical system (MEMS) switch is developed based on the Euler-Bernoulli beam and a modified couple stress theory, and is validated by comparison with the finite element results. The sensitivity functions of the pull-in voltage to the designed parameters are derived based on the proposed model. The sensitivity investigation shows that the pull-in voltage sensitivities increase/decrease nonlinearly with the increases in the designed parameters. For the stepped cantilever beam, there exists a nonzero optimal dimensionless length ratio, where the pull-in voltage is insensitive. The optimal value of the dimensionless length ratio only depends on the dimensionless width ratio, and can be obtained by solving a nonlinear equation. The determination of the designed parameters is discussed, and some recommendations are made for the RF MEMS switch optimization.展开更多
The transport of fluid, nutrients, and signaling molecules in the bone lacunar-canalicular system (LCS) is critical for osteocyte survival and function. We have applied the fluorescence recovery after photobleaching...The transport of fluid, nutrients, and signaling molecules in the bone lacunar-canalicular system (LCS) is critical for osteocyte survival and function. We have applied the fluorescence recovery after photobleaching (FRAP) approach to quantify load-induced fluid and solute transport in the LCS in situ, but the measurements were limited to cortical regions 30-50 μm underneath the periosteum due to the constrains of laser penetration. With this work, we aimed to expand our understanding of load-induced fluid and solute transport in both trabecular and cortical bone using a multiscaled image-based finite element analysis (FEA) approach. An intact murine tibia was first re-constructed from microCT images into a three-dimensional (3D) linear elastic FEA model, and the matrix deformations at various locations were calculated under axial loading. A segment of the above 3D model was then imported to the biphasic poroelasticity analysis platform (FEBio) to predict load-induced fluid pressure fields, and interstitial solute/fluid flows through LCS in both cortical and trabecular regions. Further, secondary flow effects such as the shear stress and/or drag force acting on osteocytes, the presumed mechano-sensors in bone, were derived using the previously developed ultrastructural model of Brinkman flow in the canaliculi. The material properties assumed in the FEA models were validated against previously obtained strain and FRAP transport data measured on the cortical cortex. Our results demonstrated the feasibility of this computational approach in estimating the fluid flux in the LCS and the cellular stimulation forces (shear and drag forces) for osteocytes in any cortical and trabecular bone locations, allowing further studies of how the activation of osteocytes correlates with in vivo functional bone formation. The study provides a promising platform to reveal potential cellular mechanisms underlying the anabolic power of exercises and physical activities in treating patients with skeletal deficiencies.展开更多
The hydraulic elastic bulging roll system is a new roll system being developed in recent years.It is the first time in home that dead load test and study on this system has been made.Based on the experiment,the analys...The hydraulic elastic bulging roll system is a new roll system being developed in recent years.It is the first time in home that dead load test and study on this system has been made.Based on the experiment,the analysis solution of the bulging convexity of the hydraulic elastic bulging roll was obtained by selecting appropriate displacement function and adopting inverse solution of the elasticity theory.In evaluating,a variable displacement function and its solving method was advanced.The analysis results are in accord with the experiment's.Some conclusions have laid the foundation of establishing close-loop controlled mathematical model of the hydraulic elastic bulging roll system.展开更多
Several action regimes were employed, namely, those exposed to solutions containing single and/or composite chloride and sulfate salts, and under wet-dry cycles and/or flexural loading. The variations in dynamic modul...Several action regimes were employed, namely, those exposed to solutions containing single and/or composite chloride and sulfate salts, and under wet-dry cycles and/or flexural loading. The variations in dynamic modulus of elasticity(Erd values) were monitored, as well as the key factor impacting on the chloride ingress when concrete subjected to multiple action regimes was identified by the method of Grey Relation Analysis(GRA). The changes in micro-structures and mineral products of interior concrete after different action regimes were investigated by means of X-ray diffraction(XRD), mercury intrusion technique(MIP), and scanning electron microscopy(SEM). The test results showed that the cyclic wet-dry accelerated the deterioration of OPC concrete more than the action of 35% flexural loading based on the results of Erd values and the GEA. The analyses from micro-structures could give certain explanations to the change in Erd values under different action regimes.展开更多
This investigation examines the time dependent magnetohydrodynamic (MHD) flow problem of a micropolar fluid between two radially stretching sheets. Both strong and weak concentrations of microelements are taken into...This investigation examines the time dependent magnetohydrodynamic (MHD) flow problem of a micropolar fluid between two radially stretching sheets. Both strong and weak concentrations of microelements are taken into account. Suitable transformations are employed for the conversion of partial differential equations into ordinary differential equations. Solutions to the resulting problems are developed with a homotopy analysis method (HAM). The angular velocity, skin friction coefficient, and wall couple stress coefficient are illustrated for various parameters.展开更多
According to the defect of traditional method of determining instantaneous contact regions for conjugate surfaces, a numerical approach to the determination is proposed. A local coordinate system is built by using the...According to the defect of traditional method of determining instantaneous contact regions for conjugate surfaces, a numerical approach to the determination is proposed. A local coordinate system is built by using the surface unit tangent and unit normal at the contact point. Considering that the gap forming the boundary of instantaneous contact region in the direction of the common normal vectors is given, a system of nonlinear equations is built to find the instantaneous contact boundary in local coordinate system, a modified Powell's hybrid algorithm of finite-difference approximation to the Jacobian used to solve the system. The new method simplifies the task of determining instantaneous contact regions without calculating curvatm'e and relative curvature. The validity of the proposed approach is verified by an example of hypoid gears.展开更多
基金Supported by the Zhejiang Provincial Natural Science Foundation of China under Grant No LQ13A010014the National Natural Science Foundation of China under Grant Nos 11326164,11401528,11435005 and 11375090+4 种基金the Global Change Research Program of China(No 2015CB953904)the Research Fund for the Doctoral Program of Higher Education of China(No 20120076110024)the Network Information Physics Calculation of Basic Research Innovation Research Group of China under Grant No 61321064Shanghai Collaborative Innovation Center of Trustworthy Software for Internet of Things(No ZF1213)Shanghai Minhang District Talents of High Level Scientific Research Project
文摘By means of the modified Clarkson and Kruskal (CK) direct method and the variable separation approach, we investigate the (24-1)-dimensional Ito equation which was constructed by Ito in 1980. The full symmetry group with the Kac-Moody-Virasoro algebra structure and the variable separation solutions are obtained. By selecting appropriate arbitrary functions, some special soliton excitations are shown graphically. The results presented here would be beneficial for understanding the (2-t-1)-dimensional Ito equation better.
基金Project supported by the National Natural Science Foundation of China(No.11071164)the Innovation Program of Shanghai Municipal Education Commission(No.13ZZ118)+1 种基金the Shanghai Leading Academic Discipline Project(No.XTKX2012)the Innovation Fund Project for Graduate Stu-dent of Shanghai(No.JWCXSL1201)
文摘This paper aims at analyzing the shapes of the bounded traveling wave solu- tions for a class of nonlinear wave equation with a quintic term and obtaining its damped oscillatory solutions. The theory and method of planar dynamical systems are used to make a qualitative analysis to the planar dynamical system which the bounded traveling wave solutions of this equation correspond to. The shapes, existent number, and condi- tions are presented for all bounded traveling wave solutions. The bounded traveling wave solutions are obtained by the undetermined coefficients method according to their shapes, including exact expressions of bell and kink profile solitary wave solutions and approxi- mate expressions of damped oscillatory solutions. For the approximate damped oscillatory solution, using the homogenization principle, its error estimate is given by establishing the integral equation, which reflects the relation between the exact and approximate so- lutions. It can be seen that the error is infinitesimal decreasing in the exponential form.
基金supported by the National Natural Science Foundation of China(Nos.51505089 and61204116)the Opening Project of the Science and Technology on Reliability Physics and Application Technology of Electronic Component Laboratory(Nos.ZHD201207 and 9140C030605140C03015)the Pearl River S&T Nova Program of Guangzhou(No.2014J2200086)
文摘An approximate analytical model for calculating the pull-in voltage of a stepped cantilever-type radio frequency (RF) micro electro-mechanical system (MEMS) switch is developed based on the Euler-Bernoulli beam and a modified couple stress theory, and is validated by comparison with the finite element results. The sensitivity functions of the pull-in voltage to the designed parameters are derived based on the proposed model. The sensitivity investigation shows that the pull-in voltage sensitivities increase/decrease nonlinearly with the increases in the designed parameters. For the stepped cantilever beam, there exists a nonzero optimal dimensionless length ratio, where the pull-in voltage is insensitive. The optimal value of the dimensionless length ratio only depends on the dimensionless width ratio, and can be obtained by solving a nonlinear equation. The determination of the designed parameters is discussed, and some recommendations are made for the RF MEMS switch optimization.
基金supported by grants from NIH (P30GM103333 and RO1AR054385 to LW)China CSC fellowship (to LF)DOD W81XWH-13-1-0148 (to XLL)
文摘The transport of fluid, nutrients, and signaling molecules in the bone lacunar-canalicular system (LCS) is critical for osteocyte survival and function. We have applied the fluorescence recovery after photobleaching (FRAP) approach to quantify load-induced fluid and solute transport in the LCS in situ, but the measurements were limited to cortical regions 30-50 μm underneath the periosteum due to the constrains of laser penetration. With this work, we aimed to expand our understanding of load-induced fluid and solute transport in both trabecular and cortical bone using a multiscaled image-based finite element analysis (FEA) approach. An intact murine tibia was first re-constructed from microCT images into a three-dimensional (3D) linear elastic FEA model, and the matrix deformations at various locations were calculated under axial loading. A segment of the above 3D model was then imported to the biphasic poroelasticity analysis platform (FEBio) to predict load-induced fluid pressure fields, and interstitial solute/fluid flows through LCS in both cortical and trabecular regions. Further, secondary flow effects such as the shear stress and/or drag force acting on osteocytes, the presumed mechano-sensors in bone, were derived using the previously developed ultrastructural model of Brinkman flow in the canaliculi. The material properties assumed in the FEA models were validated against previously obtained strain and FRAP transport data measured on the cortical cortex. Our results demonstrated the feasibility of this computational approach in estimating the fluid flux in the LCS and the cellular stimulation forces (shear and drag forces) for osteocytes in any cortical and trabecular bone locations, allowing further studies of how the activation of osteocytes correlates with in vivo functional bone formation. The study provides a promising platform to reveal potential cellular mechanisms underlying the anabolic power of exercises and physical activities in treating patients with skeletal deficiencies.
文摘The hydraulic elastic bulging roll system is a new roll system being developed in recent years.It is the first time in home that dead load test and study on this system has been made.Based on the experiment,the analysis solution of the bulging convexity of the hydraulic elastic bulging roll was obtained by selecting appropriate displacement function and adopting inverse solution of the elasticity theory.In evaluating,a variable displacement function and its solving method was advanced.The analysis results are in accord with the experiment's.Some conclusions have laid the foundation of establishing close-loop controlled mathematical model of the hydraulic elastic bulging roll system.
基金Funded by the National Natural Science Foundation of China(51578141)the Major State Basic Research Development Program of China(973 Program)(2015CB655102)+1 种基金the Program Most of China(2016YFE0118200)the support of China Scholarship Council
文摘Several action regimes were employed, namely, those exposed to solutions containing single and/or composite chloride and sulfate salts, and under wet-dry cycles and/or flexural loading. The variations in dynamic modulus of elasticity(Erd values) were monitored, as well as the key factor impacting on the chloride ingress when concrete subjected to multiple action regimes was identified by the method of Grey Relation Analysis(GRA). The changes in micro-structures and mineral products of interior concrete after different action regimes were investigated by means of X-ray diffraction(XRD), mercury intrusion technique(MIP), and scanning electron microscopy(SEM). The test results showed that the cyclic wet-dry accelerated the deterioration of OPC concrete more than the action of 35% flexural loading based on the results of Erd values and the GEA. The analyses from micro-structures could give certain explanations to the change in Erd values under different action regimes.
文摘This investigation examines the time dependent magnetohydrodynamic (MHD) flow problem of a micropolar fluid between two radially stretching sheets. Both strong and weak concentrations of microelements are taken into account. Suitable transformations are employed for the conversion of partial differential equations into ordinary differential equations. Solutions to the resulting problems are developed with a homotopy analysis method (HAM). The angular velocity, skin friction coefficient, and wall couple stress coefficient are illustrated for various parameters.
基金National Education Dep.of China (No. 20060056016)National Hi-tech Research and Development Program of China(863 Program, No. 2007AA042005, No. 2006AA 04Z146).
文摘According to the defect of traditional method of determining instantaneous contact regions for conjugate surfaces, a numerical approach to the determination is proposed. A local coordinate system is built by using the surface unit tangent and unit normal at the contact point. Considering that the gap forming the boundary of instantaneous contact region in the direction of the common normal vectors is given, a system of nonlinear equations is built to find the instantaneous contact boundary in local coordinate system, a modified Powell's hybrid algorithm of finite-difference approximation to the Jacobian used to solve the system. The new method simplifies the task of determining instantaneous contact regions without calculating curvatm'e and relative curvature. The validity of the proposed approach is verified by an example of hypoid gears.