Greatly enhanced corrosion/wear resistances of epoxy coating for Mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various industries.The conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient protection.In the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly technique.The outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)film.The FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier capability.The Ce film connects the outer layer with the substrate,showing the transition effect.The corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling behavior.The synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.

Enhanced corrosion resistance of epoxy resin coating via addition of CeO_(2) and benzotriazole

The use of fillers to enhance the corrosion protection of epoxy resins has been widely applied.In this work,cerium dioxide(CeO_(2))and benzotriazole(BTA)were introduced into an epoxy resin to enhance the corrosion resistance of Q235 carbon steel.Scanning electron microscopy results indicated that the CeO_(2) grains were rod-like and ellipsoidal in shape,and the distribution pattern of BTA was analyzed by energy dispersive spectroscope.The dynamic potential polarization curve proved the excellent corrosion resistance of the composite epoxy resin with CeO_(2) and BTA co-addition,and electrochemical impedance spectroscopy test analysis indicated the significantly enhanced long-term corrosion protection performance of the composite coating.And the optimal protective performance was provided by the coating containing 0.3%(mass)CeO_(2) and 20%(mass)BTA,which was attributed to the barrier performance of CeO_(2) particles and the chemical barrier effect of BTA.The formation of corrosion products was analyzed using X-ray diffraction.In addition,the corrosion resistance mechanism of the coating was also discussed in detail.

Two-Dimensional Co_(2)(OH)1,4-Benzenedicarboxylate-Halloysite Nanotube Nanocomposite-Epoxy Coating with High Corrosion Resistance

Introducing inorganic nanomaterials into a polymer matrix greatly improves the anticorrosion performance of epoxy coatings(EP);however,poor compatibility between the materials can limit the improvement in properties.In this work,based on the high interface compatibility of two-dimensional(2D)Co_(2)(OH)_(2)BDC(BDC=1,4-benzenedicarboxylate)in the epoxy coating that we reported in previous work,we fabricated a 2D Co_(2)(OH)_(2)BDC-halloysite nanotube(HNT)nanocomposite have a structure consisting of alternating of nanosheets and nanotube by in situ synthesis.The nanocomposite was characterized by Fourier transform infrared spectroscopy,X-ray diffraction,and scanning electron microscopy.The mechanical and anticorrosion performance of the 2D Co_(2)(OH)_(2)BDC-HNT/EP coating was evaluated by mechanical tests and electrochemical impedance spectroscopy spectra.Compared with a conventional unreinforced epoxy coating,the 2D Co_(2)(OH)_(2)BDC-HNT/EP coating had higher mechanical strength and toughness,and the low-frequency impedance modulus of 2D Co_(2)(OH)_(2)BDC-HNT/EP coating was increased by three orders of magnitude,demonstrating the high corrosion resistance of our reinforced coating.

Cerium Methacrylate Assisted Preparation of Highly Thermally Conductive and Anticorrosive Multifunctional Coatings for Heat Conduction Metals Protection

Preparing polymeric coatings with well corrosion resistance and high thermal conductivity(TC)to prolong operational life and ensure service reliability of heat conductive metallic materials has long been a substantive and urgent need while a difficult task.Here we report a multifunctional epoxy composite coating(F-CB/CEP)by synthesizing cerium methacrylate and ingeniously using it as a novel curing agent with corrosion inhibit for epoxy resin and modifier for boron nitride through"cation-π"interaction.The prepared F-CB/CEP coating presents a high TC of 4.29 W m^(−1)K^(−1),which is much higher than other reported anti-corrosion polymer coatings and thereby endowing metal materials coated by this coating with outstanding thermal management performance compared with those coated by pure epoxy coating.Meanwhile,the low-frequency impedance remains at 5.1×10^(11)Ωcm^(2)even after 181 days of immersion in 3.5 wt%NaCl solution.Besides,the coating also exhibits well hydrophobicity,self-cleaning properties,temperature resistance and adhesion.This work provides valuable insights for the preparation of high-performance composite coatings with potential to be used as advanced multifunctional thermal management materials,especially for heat conduction metals protection.

Surface modification of ZrO_2 nanoparticles with styrene coupling agent and its effect on the corrosion behaviour of epoxy coating

The surface of ZrO2 nanoparticles was modified by styrene coupling grafting method to improve the dispersion and interaction of the nanoparticles with the epoxy coating in which the modified ZrO2 nanoparticles were used as an additive. The grafting performance and microstructure of the nano- ZrO2/epoxy coating were analyzed by Fourier transformation infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The corrosion behavior of the nano-ZrO2/epoxy coating on mild steel was evaluated in neutral 3.5 wt% NaC1 solution using electrochemical impedance spectroscopy （EIS）. Both the coating capacitance and coating resistance fitted by the equivalent circuit from EIS were used to evaluate the protective performance of the coating towards the mild steel. The results show a superior stability and efficient corrosion protection by the modified ZrO2 nanoparticles. The epoxy coating containing 2 wt% modified ZrO2 nanoparticles exhibited the best corrosion performance among all the coating specimens. This research may provide an insight into the protection of mild steel using modified epoxy coatings.

Preparation and Characterization of Carboxyl-terminated Poly(butadiene-co-acrylonitrile)-epoxy Resin Prepolymers for Fusion-bonded-epoxy Powder Coating

Liquid carboxyl-terminated poly（butadiene-co-acrylonitrile）（CTBN）-epoxy resin（EP） prepolymers were prepared with different contents of CTBN.The chemical reactions between EP and CTBN were characterized by Fourier ransform infrared（FTIR） spectroscopy and gel permeation chromatography（GPC）.The scanning electron micrograph（SEM） and dynamic mechanical analysis（DMA） of curing films showed phase separation,and the rubber particles were finely dispersed in the epoxy matrix.Mechanical properties analysis of curing films showed that impact strength and elongation at break increased significantly upon the addition of CTBN,indicating good toughness of the modified epoxy resins.Thermogravimetric analysis（TGA） showed that the incorporation of CTBN had little effect on the thermal stability of EP.Fusion-bonded-epoxy（FBE） powder coatings modified with CTBN-EP prepolymers were prepared.The experimental results demonstrate the ability of CTBN-EP prepolymers,toughening technology to dramatically enhance the flexibility and impact resistance of FBE coatings without compromising other key properties such as corrosion protection.

Bio-Based Hyperbranched Toughener From Tannic Acid and Its Enhanced Solvent-Free Epoxy Resin with High Performance

It is essential to design economic and efficient tougheners to prepare high-performance epoxy resin;however,this has remained a huge challenge.Herein,an eco-friendly,low-cost,and facile-fabricated bio-based hyperbranched toughener,carboxylic acid-functionalized tannic acid(CATA),was successfully prepared and applicated to the preparation of solvent-free epoxy resins.The mechanical performance,morphology,structural characterization,and thermal characterization of toughened epoxy resin system were studied.The toughened epoxy resin system with only 1.0wt%CATA reached the highest impact strength,111%higher than the neat epoxy resin system.Notably,the tensile strength and elongation at break of toughened epoxy resin systems increased moderately with increasing CATA loading.Nonphase-separated hybrids with significant toughening effect were obtained.Additionally,the thermal stabilities of toughened epoxy resin systems decreased with increasing CATA loading.This study provides an eco-friendly,cost-effective,and facile approach for the preparation of high-performance,solvent-free epoxy resins with potential for practical applications in sealing integrated circuits and electrical devices fields.

Corrosion resistance of waterborne epoxy coating pigmented by nano-sized aluminium powder on steel

A novel kind of waterborne epoxy coating pigmented by nano-sized aluminium powders on high strength steel was formulated. Several coatings with different pigment volume content (PVC) were prepared. The coating morphology was observed using scanning electron microscopy (SEM), and the electrochemical properties were investigated by electrochemical impedance spectroscopy (EIS). Immersion test and neutral salt spray test were also conducted to investigate the corrosion resistance of the coating. It is demonstrated that the critical pigment volume content (CPVC) value is between 30% and 40%. The coating with PVC of 30% exhibits good corrosion resistance in 3.5% (mass fraction) NaCl solution.

Developing polydopamine modified molybdenum disulfide/epoxy resin powder coatings with enhanced anticorrosion performance and wear resistance on magnesium lithium alloys

Epoxy resin powder coating has been successfully applied on the corrosion protection of magnesium lithium alloys.However,poor wear resistance and microcracks formed during the solidification have limited it extensive application.There are limited approaches to exploit such anti-corrosion and mechanical properties of magnesium lithium alloys.Herein,the epoxy resin powder coating with polydopamine modified molybdenum disulfide(MoS_(2)@PDA-EP powder coating with 0,0.1,0.2,0.5,1.0 wt.%loading)was well prepared by melt extrusion to investigate its anticorrosion performance and wear resistance.The results revealed that the addition of MoS_(2)@PDA enhanced the adhesion strength between coatings and alloys,wear resistance and corrosion protection of the powder coatings.Among them,the optimum was obtained by 0.2 wt.%MoS_(2)@PDA-EP powder coating which could be attributed to well dispersion and efficient adhesion with coating matrix.To conclude,MoS_(2)@PDA-EP powder coating is meaningfully beneficial for the anticorrosive and wear performance improvement of magnesium lithium alloys.

Development of Siliconized Epoxy Resins and Their Application as Anticorrosive Coatings

The present work involves the development of siliconized epoxy resin to overcome the drawback of epoxy resin like poor impact strength, high rigidity and moisture absorbing nature because of which they are not applied as corrosion resistant coating. By embedding silicone into the back bone of polymeric resin the above drawback can be reduced to substantial level. For achieving this, siliconised epoxy resins were prepared by reacting amine terminated silicone resin with novolac epoxy resin and meta-phenylenediamine was used as curing agent. The applied films of coating were baked at 150oC. Cured films were evaluated for their thermal, mechanical, chemical and corrosion resistance properties to ascertain the commercial utility of these eco-friendly resin for use in anti corrosive formulations. The siliconized epoxy resins system was found to exhibit good thermal and anticorrosive properties.

Effect of Nano Al Pigment on the Anticorrosive Performance of Waterborne Epoxy Coatings

This paper presents the results regarding the effect of nano aluminum powder pigment concentration on the protective properties of waterborne epoxy films in 3.5 wt pct NaCl solution. The anticorrosive performance of the coatings with 0.5, 1, and 3 wt pct pigments and none pigment were investigated using electrochemical impedance spectroscopy （EIS）, scanning electron microscopy （SEM） and Raman spectroscopy techniques. The results show that adding appropriate amount of nano-aluminium powder pigment can enhance the barrier properties of the epoxy coating, which is attributed to the surface effect of nanoparticles and the compatibility of the pigment with the waterborne epoxy coatings.

Curing Kinetics, Mechanical Properties and Thermal Stability of Epoxy/Graphene Nanoplatelets(GNPs) Powder Coatings

Epoxy/graphene nanoplatelets（GNPs） powder coatings were fabricated using ultrasonic predispersion of GNPs and melt-blend extrusion method. The isothermal curing kinetics of epoxy/GNPs powder coating were monitored by means of real-time Fourier transform infrared spectroscopy（FT-IR） with a heating cell. The mechanical properties of the epoxy/GNPs cured coatings had been investigated, by evaluating their fracture surfaces with field-emission scanning electron microscopy（FE-SEM） after three-point-bending tests. The thermal stability of the epoxy/GNPs cured coatings was studied by thermo-gravimetric analysis（TGA）. The isothermal curing kinetics result showed that the GNPs would not affect the autocatalytic reaction mechanism, but the loading of GNPs below 1.0 wt % additive played a prompting role in the curing of the epoxy/GNPs powder coatings. The fracture strain, fracture toughness and impact resistance of the epoxy/GNPs cured coatings increased dramatically at low levels of GNPs loading（1 wt %）, indicating that the GNPs could improve the toughness of the epoxy/GNPs powder coatings. Furthermore, from FE-SEM studies of the fracture surfaces, the possible toughening mechanisms of the epoxy/GNPs cured coatings were proposed. TGA result showed that the incorporation of GNPs improved the thermal stability of the cured coatings. Hence, the GNPs modified epoxy can be an efficient approach to toughen epoxy powder coating along with improving their thermal stability.

Preparation of Silica Powder in Epoxy Resin Wear-Resistant Coating

Silicon powders possess good thermal stability and rub resistance and can be used as the filler of high temperature wear-resistant coating;it can possess good wettability and dispersibility in the organic polymer by surface modification of silane coupling agent. Organic silicon has good thermal stability, which can modify the frangibility and thermal stability of epoxy resin. A certain proportion of modified silica powder, curing agent and additives were dispersed to modified epoxy resin can compound wear-resistant coating. The results show that: the modification effect can be the best if the dosage of silane coupling agent is 1.5% of silicon powder. If the methyl triethoxy silane is 50 phr and modified silica powder is 200 phr, then various performances of coating tend to be the best.

A High-Performance Composite Epoxy Coating Based on the Cooperative Enhancement of 2D Co_(2)(OH)2BDC and Electrospun PAN Nanofiber Membrane

Based on a two-dimensional(2D)Co-MOF(Co_(2)(OH)_(2)BDC)with a self-contained organic interface and low conductivity,a composite epoxy coating(2D Co_(2)(OH)_(2)BDC-PAN/EP)was constructed by a two-step preparation.First,a polyacrylonitrile(PAN)nanofiber membrane was electrospuned on the surface of Q235 steel,followed by coating using the epoxy coating(EP)containing 2D Co_(2)(OH)_(2)BDC.The 2D Co_(2)(OH)_(2)BDC-PAN/EP composite epoxy coatings showed robust mechanical performance and excellent corrosion resistance capacity.

Nanomechanical Analysis of Hybrid Silicones and Hybrid Epoxy Coatings—A Brief Review

This review article is written on the investigations of nanomechanical properties of coatings by using nanoindentation techniques. The focus is on the studies that were conducted on epoxy polymer, silicones and their hybrid materials. The article describes a large number of developmental studies that are conducted on coatings. Materials properties such as nanoindentation hardness, modulus, scratch, wear and viscoelastic behavior have been described. Moreover, the article summarizes various studies that mention the use of different nanoparticles in coating formulations that could improve the mechanical strength and service life span of the coatings. The mode and mechanism of material’s failure has been outlined and discussed.

Preparation of Poly(o-toluidine)/Nano ZrO2/Epoxy Composite Coating and Its Application for Corrosion Protection of Steel

The main objective was to study the anticorrosion performance of poly（o-toluidine）/nano ZrO2/epoxy composite coating.Poly（o-toluidine）/nano ZrO2 composite was prepared by in situ polymerization of o-toluidine monomer in the presence of nano ZrO2 particles.Fourier transformation infrared spectroscopy（FT-IR）,UV-visible spectroscopy（UV-vis）,X-ray diffraction（XRD）,Scanning electron microscopy（SEM）,and Thermogravimetric analysis（TGA） were used to characterize the composition and structure of the composite.Poly（o-toluidine）/nano ZrO2 composite was mixed with epoxy resin through a solution blending method and the three components poly（o-toluidine）/nano ZrO2/epoxy composite coating was coated onto the surface of steel sample by the brush coating method.The anticorrosion performance of poly（o-toluidine）/nano ZrO2/epoxy composite coating on steel sample was studied by polarization curve and electrochemical impendence spectroscopy in 3.5% Na Cl solution as corrosion environment and also compared with that of poly（o-toluidine）/epoxy composite coating and pure epoxy coating.It was observed that the composite coating containing poly（otoluidine）/nano ZrO2 composite has got higher corrosion protection ability than that of poly（o-toluidine）.The electrochemical measurement results demonstrated that poly（o-toluidine） fillers improve the electrochemical anticorrosion performance of epoxy coating and the addition of nano ZrO2 particles increases the tortuosity of the diffusion pathway of corrosive substances.

Influence of graphene on the anti-corrosion performance of epoxy-based coatings

In this work, graphene-modified epoxy-based anti-corrosion coatings were prepared and the influence of graphene on the anti-corrosion performance of the epoxy-based coatings was investigated with water contact angle test ,chemical solution immersion test, and electrochemical test. The water contact angle and chemical solution resistance of the epoxy-based coatings were improved with an increase in graphene content from 0 to 0.4%. These results prove that addition of graphene can significantly improve the hydrophobicity and impermeability of epoxy- based coatings. However, when the graphene content was increased to 0.5%, the performance of the epoxy-based coatings decreased because of graphene aggregation. Tafel polarization results show that graphene addition can significantly reduce the corrosion current density and corrosion potential of epoxy-based coatings, which enhance their anti-corrosion performance.

The Durability of Epoxy Resin Coating

The durability of epoxy resin coating was studied under environments with relative humidity （RH） of 98%-100%, at 55 ℃ for 900 h, at 65 ℃ for 700 h and at 75 ℃ for 400 h, respectively. Peel strength test, dynamical mechanical thermal analysis （DMTA）, infrared spectroscopy （IR） and energy dispersive X-ray spectroscopy （EDX） were employed for measurements. Peel strength indicated the development of adhesive property of the coating, DMTA indicated the development of physical property, IR revealed the development of chemical structure, and EDX showed surface element change of the coating. All these results show a good time- temperature equivalence characteristic between humidity aging time and temperature.

Effects of direct stray current on the performance of cathodic disbonding epoxy powder coatings

The influence of the direction and magnitude of direct(DC)stray current on the disbonding performance of epoxy powder coating was studied by using electrochemical impedance spectroscopy and scanning electron microscopy technology.The results show that the application of DC stray current could accelerate the anodic dissolution.The peeling degree of the coating increases as the magnitude of positive DC stray current interference increases in the range of 2–8V.With 16V positive stray current disturbance,the degree of coating disbonding decreases.With the application of negative stray current,the coating peeling becomes more serious,and the degree of peeling increases as the DC stray current increases.

Electrochemical Impedance Spectroscopy of Hybrid Epoxy Resin Emulsion Coatings

A hybrid epoxy resin one pack emulsion with acrylate was synthesized for application in the field of corrosion protec- tion. Electrochemical impedance tests were applied to steel specimens coated with hybrid epoxy and tested after im- mersion in 3.5% NaCl solution at room temperature. Results taken from Nyquist and Bode plots as were analyzed by means of software provided with the instrument. Specimens were examined under scanning electron microscope shows a clear rupture and degradation in hybrid epoxy coating after prolonged exposer to salt solution.