Time reversal mirror (TRM) can use the physical characteristics of the underwater acoustic (UWA) channel to focus on the desired user in multi-user UWA communication. The active average sound intensity (AASI) de...Time reversal mirror (TRM) can use the physical characteristics of the underwater acoustic (UWA) channel to focus on the desired user in multi-user UWA communication. The active average sound intensity (AASI) detector can estimate all azimuths of users with the same frequency band at the same time in order to achieve directional communication by vector combination. Space-division multiple access (SDMA) based on TRM combined with the AASI detector is proposed in this paper, which can make the capacity of the code division multiple access (CDMA) UWA system significantly increase. The simulation and lake test results show that the 7-user UWA multi-user system can achieve low bit error communication.展开更多
Considering the reference frequency dissemination requirements of the Square Kilometre Array telescope(SKA)project,on the basis of the 1f–2f precision frequency synchronization scheme,we propose and demonstrate a f...Considering the reference frequency dissemination requirements of the Square Kilometre Array telescope(SKA)project,on the basis of the 1f–2f precision frequency synchronization scheme,we propose and demonstrate a fiber-based multiple-access frequency synchronization scheme.The dissemination reference frequency can be recovered at arbitrary nodes along the entire fiber link.It can be applied to antennas close proximity to the SKA central station,and will lead to a better SKA frequency synchronization network.As a performance test,we recover the disseminated 100-MHz reference frequency at an arbitrary node chosen as being 5 km away from the transmitting site.Relative frequency stabilities of2.0×10^(-14)/s and 1.6×10^(-16)/10~4 s are obtained.We also experimentally verify the feasibility of a frequency dissemination link with three access points.展开更多
The problem of the simultaneous multi-user resource allocation algorithm in orthogonal frequency division multiple access(OFDMA)based systems has recently attracted significant interest.However,most studies focus on m...The problem of the simultaneous multi-user resource allocation algorithm in orthogonal frequency division multiple access(OFDMA)based systems has recently attracted significant interest.However,most studies focus on maximizing the system throughput and spectral efficiency.As the green radio is essential in 5G and future networks,the energy efficiency becomes the major concern.In this paper,we develop four resource allocation schemes in the downlink OFDMA network and the main focus is on analyzing the energy efficiency of these schemes.Specifically,we employ the advanced multi-antenna technology in a multiple input-multiple output(MIMO)system.The first scheme is based on transmit spatial diversity(TSD),in which the vector channel with the highest gain between the base station(BTS)and specific antenna at the remote terminal(RT)is chosen for transmission.The second scheme further employs spatial multiplexing on the MIMO system to enhance the throughput.The space-division multiple-access(SDMA)scheme assigns single subcarrier simultaneously to RTs with pairwise“nearly orthogonal”spatial signatures.In the fourth scheme,we propose to design the transmit beamformers based on the zero-forcing(ZF)criterion such that the multi-user interference(MUI)is completely removed.We analyze the tradeoff between the throughput and power consumption and compare the performance of these schemes in terms of the energy efficiency.展开更多
Multiple access interference (MAI) is the most serious interference in spectral phase encoding optical code division multiple access (SPE OCDMA) systems. This paper focuses on the behavior of MAI in SPE OCDMA systems ...Multiple access interference (MAI) is the most serious interference in spectral phase encoding optical code division multiple access (SPE OCDMA) systems. This paper focuses on the behavior of MAI in SPE OCDMA systems with pseudorandom coding. The statistical expectation of multi access interference (MAI) is derived and plotted. The results confirm that MAI can be suppressed effectively by pseudorandom coding with m sequences.展开更多
The downlink minimum bit error rate (MBER) transmit beamforming is directly designed based on the uplink MBER receive beamforming solution for time division duplex (TDD) space-division multiple-access (SDMA) induced m...The downlink minimum bit error rate (MBER) transmit beamforming is directly designed based on the uplink MBER receive beamforming solution for time division duplex (TDD) space-division multiple-access (SDMA) induced multiple-input multiple-output (MIMO) systems, where the base station (BS) is equipped with multiple antennas to support multiple single-antenna mobile terminals (MTs). It is shown that the dual relationship between multiuser detection and multiuser transmission can be extended to the rank-deficient system where the number of users supported is more than the number of transmit antennas available at the BS, if the MBER design is adopted. The proposed MBER transmit beamforming scheme is capable of achieving better performance over the standard minimum mean square error transmit beamforming solution with the support of low-complexity and high power-efficient MTs, particularly for rank-deficient TDD-SDMA MIMO systems. The robustness of the proposed MBER transmit beamforming design to the downlink and uplink noise or channel mismatch is investigated using simulation.展开更多
Herein,an attention-grabbing and up-to-date review related to major multiplexing techniques is presented which in-cludes wavelength division multiplexing(WDM),polarization division multiplexing(PDM),space division mul...Herein,an attention-grabbing and up-to-date review related to major multiplexing techniques is presented which in-cludes wavelength division multiplexing(WDM),polarization division multiplexing(PDM),space division multiplexing(SDM),mode division multiplexing(MDM)and orbital angular momentum multiplexing(OAMM).Multiplexing is a mech-anism by which multiple signals are combined into a shared channel used to showcase the maximum capacity of the op-tical links.However,it is critical to develop hybrid multiplexing methods to allow enhanced channel numbers.In this re-view,we have also included hybrid multiplexing techniques such as WDM-PDM,WDM-MDM and PDM-MDM.It is prob-able to attain N×M channels by utilizing N wavelengths and M guided-modes by simply utilizing hybrid WDM-MDM(de)multiplexers.To the best of our knowledge,this review paper is one of its kind which has highlighted the most prom-inent and recent signs of progress in multiplexing techniques in one place.展开更多
High-speed ophthalmic optical coherence tomography(OCT)systems are of interest because they allow rapid,motion-free,and wide-field retinal imaging.Space-division multiplexing optical coherence tomography(SDMOCT)is a h...High-speed ophthalmic optical coherence tomography(OCT)systems are of interest because they allow rapid,motion-free,and wide-field retinal imaging.Space-division multiplexing optical coherence tomography(SDMOCT)is a high-speed imaging technology that takes advantage of the long coherence length of micro electro mechanical vertical cavity surface emitting laser sources to multiplex multiple images along a single imaging depth.We demonstrate wide-field retinal OCT imaging,acquired at an effective A-scan rate of 800,000 A-scans/s with volumetric images covering up to 12.5 mm×7.4 mm on the retina and captured in less than 1 s.A clinical feasibility study was conducted to compare the ophthalmic SDM-OCT with commercial OCT systems,illustrating the high-speed capability of SDM-OCT in a clinical setting.展开更多
Multicore fiber(MCF)which contains more than one core in a single fiber cladding has attracted ever increasing attention for application in optical sensing systems owing to its unique capability of independent light t...Multicore fiber(MCF)which contains more than one core in a single fiber cladding has attracted ever increasing attention for application in optical sensing systems owing to its unique capability of independent light transmission in multiple spatial channels.Different from the situation in standard single mode fiber(SMF),the fiber bending gives rise to tangential strain in off-center cores,and this unique feature has been employed for directional bending and shape sensing,where strain measurement is achieved by using either fiber Bragg gratings(FBGs),optical frequency-domain reflectometry(OFDR)or Brillouin distributed sensing technique.On the other hand,the parallel spatial cores enable space-division multiplexed(SDM)system configuration that allows for the multiplexing of multiple distributed sensing techniques.As a result,multi-parameter sensing or performance enhanced sensing can be achieved by using MCF.In this paper,we review the research progress in MCF based distributed fiber sensors.Brief introductions of MCF and the multiplexing/de-multiplexing methods are presented.The bending sensitivity of off-center cores is analyzed.Curvature and shape sensing,as well as various SDM distributed sensing using MCF are summarized,and the working principles of diverse MCF sensors are discussed.Finally,we present the challenges and prospects of MCF for distributed sensing applications.展开更多
Great strides have been made over the past decade to establish femtosecond lasers in advanced manufacturing systems for enabling new forms of non-contact processing of transparent materials.Research advances have show...Great strides have been made over the past decade to establish femtosecond lasers in advanced manufacturing systems for enabling new forms of non-contact processing of transparent materials.Research advances have shown that a myriad of additive and subtractive techniques is now possible for flexible 2D and 3D structuring of such materials with micro-and nano-scale precision.In this paper,these techniques have been refined and scaled up to demonstrate the potential for 3D writing of high-density optical packaging components,specifically addressing the major bottleneck for efficiently connecting optical fibres to silicon photonic(SiP)processors for use in telecom and data centres.An 84-channel fused silica interposer was introduced for high-density edge coupling of multicore fibres(MCFs)to a SiP chip.Femtosecond laser irradiation followed by chemical etching was further harnessed to open alignment sockets,permitting rapid assembly with precise locking of MCF positions for efficient coupling to laser written optical waveguides in the interposer.A 3D waveguide fanout design provided an attractive balancing of low losses,modematching,high channel density,compact footprint,and low crosstalk.The 3D additive and subtractive processes thus demonstrated the potential for higher scale integration and rapid photonic assembly and packaging of micro-optic components for telecom interconnects,with possible broader applications in integrated biophotonic chips or micro-displays.展开更多
The problem of blind multiuser detection in dispersive channels of Code-Division Multiple-Access (CDMA) in the presence of both Multiple-Access Interference (MAI) and InterSymbol Interference (ISI) is considered. In p...The problem of blind multiuser detection in dispersive channels of Code-Division Multiple-Access (CDMA) in the presence of both Multiple-Access Interference (MAI) and InterSymbol Interference (ISI) is considered. In practice, it is showed that by incorporating the desired user's signature waveform and the auxiliary vector, the information of the user can be identified using the suboptimal subspace method. The major contribution of this paper is to propose a minimum-mean-square-error detector with the suboptimal subspace-based blind technique for joint suppression of MAI and ISI in the dispersive CDMA channels.展开更多
In order to choose the proper radius of oxide aperture for few-mode vertical-cavity surface-emitting lasers (VCSELs), the influences of oxide aperture size on the multi-transverse-mode behaviors are investigated in ...In order to choose the proper radius of oxide aperture for few-mode vertical-cavity surface-emitting lasers (VCSELs), the influences of oxide aperture size on the multi-transverse-mode behaviors are investigated in detail. By establishing the effective refractive index model to simulate VCSELs with different radii of oxide apertures, the wavelength and corresponding order of different modes are obtained. VCSELs with three kinds of oxide apertures are manufactured. Then the multi-transverse-mode spectra and near-field are measured. It is found that when the radius is between 1.5 and 4.5μm, few-mode VCSELs can be implemented. The 2.5μm VCSEL manufactured in this paper only emits LP01 mode and LP21 mode. Since the space distance between the two modes is 2μm, it is expected to realize direct-modulation few-mode VCSELs by channel etching or ion implantation between the two modes.展开更多
This paper proposed an optimized fast handoff scheme for real time applications in next generation IP based CDMA wireless networks. The idea is to utilize optimized IP multicasting handoff (based on PIM SM), which is ...This paper proposed an optimized fast handoff scheme for real time applications in next generation IP based CDMA wireless networks. The idea is to utilize optimized IP multicasting handoff (based on PIM SM), which is triggered by CDMA layer 2 functionality. An IP based cellular network model with WCDMA FDD air interface and IP based packet traffic is adopted. No special network entities and signaling for handoff are added in our network model. The simulation results show that low delay and low packet lost rate can be obtained.展开更多
The large carrier frequency shift caused by the high-speed movement of satellite (Doppler effects) and the propagation delay on the up-down link are very critical issues in an LEO satellite communication system, which...The large carrier frequency shift caused by the high-speed movement of satellite (Doppler effects) and the propagation delay on the up-down link are very critical issues in an LEO satellite communication system, which affects both the selection and the implementation of a suitable access method. A Doppler based multiple access technique is used here to control the flow and an MPRMA-HS protocol is proposed for the application in LEO satellite communication systems. The extended simulation trials prove that the proposed scheme seems to be a very promising access method.展开更多
We propose and demonstrate a visible light communication (VLC) scheme based on space-division multiple access (SDMA) optical beamforming to accommodate multiple user devices in the VLC based on optical beamforming...We propose and demonstrate a visible light communication (VLC) scheme based on space-division multiple access (SDMA) optical beamforming to accommodate multiple user devices in the VLC based on optical beamforming. SDMA optical bealnforming is a technique which separates light-emitting diode light spa- tially and focuses each part on different target devices simultaneously. We show the experimental results of the VLC signal amplitudes, the optical power densities, and the bit-error rate performance as a function of transmission distance before and after the SDMA optical beamforming. The results show that the VLC signal amplitudes and optical power densities are improved by 8-2 and 3.8- 5 dB, respectively, with the help of SDMA optical beamforming.展开更多
Space-division multiplexing (SDM) using multi-core fibers (MCFs) and few-mode fibers (FMFs) was proposed as a solution to increase capacity and/or reduce the cost per bit of fiber-optic transmission. Advances in...Space-division multiplexing (SDM) using multi-core fibers (MCFs) and few-mode fibers (FMFs) was proposed as a solution to increase capacity and/or reduce the cost per bit of fiber-optic transmission. Advances in passive and active SDM devices as well as digital signal processing have led to impressive SDM transmission demonstrations in the laboratory. Although the perceived advantages in terms of capacity and cost per bit that SDM offers over parallel SMF bundles are not universally accepted, SDM is beginning to emerge as an indispensable solution in major network segments. The introduction of the spatial degree of freedom allows optical networks to overcome fundamental limitations such as fiber nonlinearity as well practical limitations such as power delivery. We describe these application scenarios that the optical communications industry has already began to explore. From a fundamental science point of view, concepts such as the principal modes, generalized Stokes space, and multi-component solitons discovered in SDM research will likely have a broad impact in other areas of science and engineering.展开更多
Recently, a tunable fiber Bragg grating(FBG) was developed by using stress-responsive colloidal crystals. In this paper, we have simulated the application of these nanoparticles into the super-structured fiber Bragg g...Recently, a tunable fiber Bragg grating(FBG) was developed by using stress-responsive colloidal crystals. In this paper, we have simulated the application of these nanoparticles into the super-structured fiber Bragg grating(SSFBG) written with perfect sequences derived from a short maximal-length sequence. A tunable SSFBG will be available to overcome the prohibitive temperature variation of the optical codecs. Nevertheless,we presented a method to implement coherent time spreading optical code-division multiple-access(OCDMA) where a unique code(or perfect sequence) can be reused and mixed with different wavelengths to obtain a tunable wavelength-division multiplexing(WDM)system. In order to maximize the binary throughput, we have selected a unique short maximal-length sequence composed of 7 chips that can be tuned with 7 different optical wavelengths. We found thousands of different tunable combinations that presented power contrast ratios(P/C) higher than 12 dB. When a WDM-OCDMA system used 2 different combinations simultaneously, the perfect binary detection with error correction codes was achieved successfully. The tunable SSFBG with colloidal crystals will be a simple and good alternative choice for fiber-to-the-home(FTTH) communications.展开更多
One fiber radio scheme using shifted prime codes for interference elimination is proposed for optical code-division multiple-access (OCDMA) network. By taking advantage of the cyclic property of the shifted prime code...One fiber radio scheme using shifted prime codes for interference elimination is proposed for optical code-division multiple-access (OCDMA) network. By taking advantage of the cyclic property of the shifted prime codes in the same code groups, the proposed compact decoder is low cost and suitable to be used in the task manager node in the applications of wireless sensor networks. The performance comparison for sev-eral OCDMA-based fiber radio networks is also given to clarify the advantage of the proposed one.展开更多
In recent times, there has been growing interests in integration of voice, data and video traffic in wireless communication networks. With these growing interests, WCDMA has immerged as an attractive access technique....In recent times, there has been growing interests in integration of voice, data and video traffic in wireless communication networks. With these growing interests, WCDMA has immerged as an attractive access technique. The performance of WCDMA system is deteriorated in presence of multipath fading environment. The paper presents space-time coded minimum mean square error (MMSE) Decision Feedback Equalizer (DFE) for wideband code division multiple access (WCDMA) in a frequency selective channel. The filter coefficients in MMSE DFE are optimized to suppress noise, intersymbol interference (ISI), and multiple access interference (MAI) with reasonable system complexity. For the above structure, we have presented the estimation of BER for a MMSE DFE using computer simulation experiments. The simulation includes the effects of additive white Gaussian noise, multipath fading and multiple access interference (MAI). Furthermore, the performance is compared with standard linear equalizer (LE) and RAKE receiver. Numerical and simulation results show that the MMSE DFE exhibits significant performance improvement over the standard linear equalizer (LE) and RAKE receiver.展开更多
Broadband mode converters are essential devices for space-division and wavelength-division multiplexing systems.There are great challenges in the generation of higher-order modes above the third order with low loss an...Broadband mode converters are essential devices for space-division and wavelength-division multiplexing systems.There are great challenges in the generation of higher-order modes above the third order with low loss and high mode purity employing all-fiber devices.In this paper,an all-fiber LP_(41)mode converter is proposed and fabricated by tapering a nine-core single-mode fiber bundle.Experimental results indicate that this all-fiber LP_(41)mode converter is low-loss,high-purity,and ultrabroadband.The insertion loss is less than 0.4 dB.The purity of odd LP_(41)at 1310 nm is 95.09%,and the operating bandwidth exceeds 280 nm.展开更多
基金supported by the National Natural Science Foundation of China(6147113751179034)+3 种基金the Ships Pre-research Support Technology Fund(13J3.1.5)the Natural Science Foundation of Heilongjiang Province(F201109)the Innovation Talents of Science and the Technology Research Projects of Harbin(2013RFQXJ101)the National Defense Basic Technology Research(JSJC2013604C012)
文摘Time reversal mirror (TRM) can use the physical characteristics of the underwater acoustic (UWA) channel to focus on the desired user in multi-user UWA communication. The active average sound intensity (AASI) detector can estimate all azimuths of users with the same frequency band at the same time in order to achieve directional communication by vector combination. Space-division multiple access (SDMA) based on TRM combined with the AASI detector is proposed in this paper, which can make the capacity of the code division multiple access (CDMA) UWA system significantly increase. The simulation and lake test results show that the 7-user UWA multi-user system can achieve low bit error communication.
基金Project supported by the National Key Scientific Instrument and Equipment Development Project of China(Grant No.2013YQ09094303)
文摘Considering the reference frequency dissemination requirements of the Square Kilometre Array telescope(SKA)project,on the basis of the 1f–2f precision frequency synchronization scheme,we propose and demonstrate a fiber-based multiple-access frequency synchronization scheme.The dissemination reference frequency can be recovered at arbitrary nodes along the entire fiber link.It can be applied to antennas close proximity to the SKA central station,and will lead to a better SKA frequency synchronization network.As a performance test,we recover the disseminated 100-MHz reference frequency at an arbitrary node chosen as being 5 km away from the transmitting site.Relative frequency stabilities of2.0×10^(-14)/s and 1.6×10^(-16)/10~4 s are obtained.We also experimentally verify the feasibility of a frequency dissemination link with three access points.
文摘The problem of the simultaneous multi-user resource allocation algorithm in orthogonal frequency division multiple access(OFDMA)based systems has recently attracted significant interest.However,most studies focus on maximizing the system throughput and spectral efficiency.As the green radio is essential in 5G and future networks,the energy efficiency becomes the major concern.In this paper,we develop four resource allocation schemes in the downlink OFDMA network and the main focus is on analyzing the energy efficiency of these schemes.Specifically,we employ the advanced multi-antenna technology in a multiple input-multiple output(MIMO)system.The first scheme is based on transmit spatial diversity(TSD),in which the vector channel with the highest gain between the base station(BTS)and specific antenna at the remote terminal(RT)is chosen for transmission.The second scheme further employs spatial multiplexing on the MIMO system to enhance the throughput.The space-division multiple-access(SDMA)scheme assigns single subcarrier simultaneously to RTs with pairwise“nearly orthogonal”spatial signatures.In the fourth scheme,we propose to design the transmit beamformers based on the zero-forcing(ZF)criterion such that the multi-user interference(MUI)is completely removed.We analyze the tradeoff between the throughput and power consumption and compare the performance of these schemes in terms of the energy efficiency.
基金Fund of Science and Technology Develop-ment of Shanghai(No.0 0 JC14 0 5 4
文摘Multiple access interference (MAI) is the most serious interference in spectral phase encoding optical code division multiple access (SPE OCDMA) systems. This paper focuses on the behavior of MAI in SPE OCDMA systems with pseudorandom coding. The statistical expectation of multi access interference (MAI) is derived and plotted. The results confirm that MAI can be suppressed effectively by pseudorandom coding with m sequences.
文摘The downlink minimum bit error rate (MBER) transmit beamforming is directly designed based on the uplink MBER receive beamforming solution for time division duplex (TDD) space-division multiple-access (SDMA) induced multiple-input multiple-output (MIMO) systems, where the base station (BS) is equipped with multiple antennas to support multiple single-antenna mobile terminals (MTs). It is shown that the dual relationship between multiuser detection and multiuser transmission can be extended to the rank-deficient system where the number of users supported is more than the number of transmit antennas available at the BS, if the MBER design is adopted. The proposed MBER transmit beamforming scheme is capable of achieving better performance over the standard minimum mean square error transmit beamforming solution with the support of low-complexity and high power-efficient MTs, particularly for rank-deficient TDD-SDMA MIMO systems. The robustness of the proposed MBER transmit beamforming design to the downlink and uplink noise or channel mismatch is investigated using simulation.
基金financially supported by the Russian Foundation for Basic Research(grant No.18-29-20045)for WDM,MDM and hybrid WDM-MDM,WDM-PDM sectionsthe Russian Science Foundation(grant No.21-79-20075)for PDM,OAMM and hybrid PDM-MDM sectionsthe Ministry of Science and Higher Education of the Russian Federation under the FSRC"Crystallography and Photonics"of the Russian Academy of Sciences(the state task No.007-GZ/Ch3363/26)for comparative analysis.
文摘Herein,an attention-grabbing and up-to-date review related to major multiplexing techniques is presented which in-cludes wavelength division multiplexing(WDM),polarization division multiplexing(PDM),space division multiplexing(SDM),mode division multiplexing(MDM)and orbital angular momentum multiplexing(OAMM).Multiplexing is a mech-anism by which multiple signals are combined into a shared channel used to showcase the maximum capacity of the op-tical links.However,it is critical to develop hybrid multiplexing methods to allow enhanced channel numbers.In this re-view,we have also included hybrid multiplexing techniques such as WDM-PDM,WDM-MDM and PDM-MDM.It is prob-able to attain N×M channels by utilizing N wavelengths and M guided-modes by simply utilizing hybrid WDM-MDM(de)multiplexers.To the best of our knowledge,this review paper is one of its kind which has highlighted the most prom-inent and recent signs of progress in multiplexing techniques in one place.
基金National Science Foundation(DBI-1455613,IIP-1623823,IIP-1640707)National Institutes of Health(R01-EB025209)。
文摘High-speed ophthalmic optical coherence tomography(OCT)systems are of interest because they allow rapid,motion-free,and wide-field retinal imaging.Space-division multiplexing optical coherence tomography(SDMOCT)is a high-speed imaging technology that takes advantage of the long coherence length of micro electro mechanical vertical cavity surface emitting laser sources to multiplex multiple images along a single imaging depth.We demonstrate wide-field retinal OCT imaging,acquired at an effective A-scan rate of 800,000 A-scans/s with volumetric images covering up to 12.5 mm×7.4 mm on the retina and captured in less than 1 s.A clinical feasibility study was conducted to compare the ophthalmic SDM-OCT with commercial OCT systems,illustrating the high-speed capability of SDM-OCT in a clinical setting.
文摘Multicore fiber(MCF)which contains more than one core in a single fiber cladding has attracted ever increasing attention for application in optical sensing systems owing to its unique capability of independent light transmission in multiple spatial channels.Different from the situation in standard single mode fiber(SMF),the fiber bending gives rise to tangential strain in off-center cores,and this unique feature has been employed for directional bending and shape sensing,where strain measurement is achieved by using either fiber Bragg gratings(FBGs),optical frequency-domain reflectometry(OFDR)or Brillouin distributed sensing technique.On the other hand,the parallel spatial cores enable space-division multiplexed(SDM)system configuration that allows for the multiplexing of multiple distributed sensing techniques.As a result,multi-parameter sensing or performance enhanced sensing can be achieved by using MCF.In this paper,we review the research progress in MCF based distributed fiber sensors.Brief introductions of MCF and the multiplexing/de-multiplexing methods are presented.The bending sensitivity of off-center cores is analyzed.Curvature and shape sensing,as well as various SDM distributed sensing using MCF are summarized,and the working principles of diverse MCF sensors are discussed.Finally,we present the challenges and prospects of MCF for distributed sensing applications.
基金Financial support from Huawei Technologies Co.,Ltd,China(Project YB2016020025)is gratefully acknowledged.
文摘Great strides have been made over the past decade to establish femtosecond lasers in advanced manufacturing systems for enabling new forms of non-contact processing of transparent materials.Research advances have shown that a myriad of additive and subtractive techniques is now possible for flexible 2D and 3D structuring of such materials with micro-and nano-scale precision.In this paper,these techniques have been refined and scaled up to demonstrate the potential for 3D writing of high-density optical packaging components,specifically addressing the major bottleneck for efficiently connecting optical fibres to silicon photonic(SiP)processors for use in telecom and data centres.An 84-channel fused silica interposer was introduced for high-density edge coupling of multicore fibres(MCFs)to a SiP chip.Femtosecond laser irradiation followed by chemical etching was further harnessed to open alignment sockets,permitting rapid assembly with precise locking of MCF positions for efficient coupling to laser written optical waveguides in the interposer.A 3D waveguide fanout design provided an attractive balancing of low losses,modematching,high channel density,compact footprint,and low crosstalk.The 3D additive and subtractive processes thus demonstrated the potential for higher scale integration and rapid photonic assembly and packaging of micro-optic components for telecom interconnects,with possible broader applications in integrated biophotonic chips or micro-displays.
文摘The problem of blind multiuser detection in dispersive channels of Code-Division Multiple-Access (CDMA) in the presence of both Multiple-Access Interference (MAI) and InterSymbol Interference (ISI) is considered. In practice, it is showed that by incorporating the desired user's signature waveform and the auxiliary vector, the information of the user can be identified using the suboptimal subspace method. The major contribution of this paper is to propose a minimum-mean-square-error detector with the suboptimal subspace-based blind technique for joint suppression of MAI and ISI in the dispersive CDMA channels.
基金supported by the National Basic Research Program of China(No.2014CB3400102)the National Natural Science Foundation of China(No.61335004)+1 种基金the National High Technology Research and Development Program of China(No.2015AA017101)the National Key Technologies R&D Program of China(No.2016YFB0400603)
文摘In order to choose the proper radius of oxide aperture for few-mode vertical-cavity surface-emitting lasers (VCSELs), the influences of oxide aperture size on the multi-transverse-mode behaviors are investigated in detail. By establishing the effective refractive index model to simulate VCSELs with different radii of oxide apertures, the wavelength and corresponding order of different modes are obtained. VCSELs with three kinds of oxide apertures are manufactured. Then the multi-transverse-mode spectra and near-field are measured. It is found that when the radius is between 1.5 and 4.5μm, few-mode VCSELs can be implemented. The 2.5μm VCSEL manufactured in this paper only emits LP01 mode and LP21 mode. Since the space distance between the two modes is 2μm, it is expected to realize direct-modulation few-mode VCSELs by channel etching or ion implantation between the two modes.
文摘This paper proposed an optimized fast handoff scheme for real time applications in next generation IP based CDMA wireless networks. The idea is to utilize optimized IP multicasting handoff (based on PIM SM), which is triggered by CDMA layer 2 functionality. An IP based cellular network model with WCDMA FDD air interface and IP based packet traffic is adopted. No special network entities and signaling for handoff are added in our network model. The simulation results show that low delay and low packet lost rate can be obtained.
基金This project was supported by National "863" High Technology Research and Development Program of China (863-2-5-2.1).
文摘The large carrier frequency shift caused by the high-speed movement of satellite (Doppler effects) and the propagation delay on the up-down link are very critical issues in an LEO satellite communication system, which affects both the selection and the implementation of a suitable access method. A Doppler based multiple access technique is used here to control the flow and an MPRMA-HS protocol is proposed for the application in LEO satellite communication systems. The extended simulation trials prove that the proposed scheme seems to be a very promising access method.
基金supported by Kyungsung University Research Grants in 2014
文摘We propose and demonstrate a visible light communication (VLC) scheme based on space-division multiple access (SDMA) optical beamforming to accommodate multiple user devices in the VLC based on optical beamforming. SDMA optical bealnforming is a technique which separates light-emitting diode light spa- tially and focuses each part on different target devices simultaneously. We show the experimental results of the VLC signal amplitudes, the optical power densities, and the bit-error rate performance as a function of transmission distance before and after the SDMA optical beamforming. The results show that the VLC signal amplitudes and optical power densities are improved by 8-2 and 3.8- 5 dB, respectively, with the help of SDMA optical beamforming.
基金This work has been supported in part by the National Basic Research Program of China (973) (No. 2014CB340104/1), the National Natural Science Foundation of China (NSFC) (Grant Nos. 61377076, 61307085 and 61431009).
文摘Space-division multiplexing (SDM) using multi-core fibers (MCFs) and few-mode fibers (FMFs) was proposed as a solution to increase capacity and/or reduce the cost per bit of fiber-optic transmission. Advances in passive and active SDM devices as well as digital signal processing have led to impressive SDM transmission demonstrations in the laboratory. Although the perceived advantages in terms of capacity and cost per bit that SDM offers over parallel SMF bundles are not universally accepted, SDM is beginning to emerge as an indispensable solution in major network segments. The introduction of the spatial degree of freedom allows optical networks to overcome fundamental limitations such as fiber nonlinearity as well practical limitations such as power delivery. We describe these application scenarios that the optical communications industry has already began to explore. From a fundamental science point of view, concepts such as the principal modes, generalized Stokes space, and multi-component solitons discovered in SDM research will likely have a broad impact in other areas of science and engineering.
文摘Recently, a tunable fiber Bragg grating(FBG) was developed by using stress-responsive colloidal crystals. In this paper, we have simulated the application of these nanoparticles into the super-structured fiber Bragg grating(SSFBG) written with perfect sequences derived from a short maximal-length sequence. A tunable SSFBG will be available to overcome the prohibitive temperature variation of the optical codecs. Nevertheless,we presented a method to implement coherent time spreading optical code-division multiple-access(OCDMA) where a unique code(or perfect sequence) can be reused and mixed with different wavelengths to obtain a tunable wavelength-division multiplexing(WDM)system. In order to maximize the binary throughput, we have selected a unique short maximal-length sequence composed of 7 chips that can be tuned with 7 different optical wavelengths. We found thousands of different tunable combinations that presented power contrast ratios(P/C) higher than 12 dB. When a WDM-OCDMA system used 2 different combinations simultaneously, the perfect binary detection with error correction codes was achieved successfully. The tunable SSFBG with colloidal crystals will be a simple and good alternative choice for fiber-to-the-home(FTTH) communications.
文摘One fiber radio scheme using shifted prime codes for interference elimination is proposed for optical code-division multiple-access (OCDMA) network. By taking advantage of the cyclic property of the shifted prime codes in the same code groups, the proposed compact decoder is low cost and suitable to be used in the task manager node in the applications of wireless sensor networks. The performance comparison for sev-eral OCDMA-based fiber radio networks is also given to clarify the advantage of the proposed one.
文摘In recent times, there has been growing interests in integration of voice, data and video traffic in wireless communication networks. With these growing interests, WCDMA has immerged as an attractive access technique. The performance of WCDMA system is deteriorated in presence of multipath fading environment. The paper presents space-time coded minimum mean square error (MMSE) Decision Feedback Equalizer (DFE) for wideband code division multiple access (WCDMA) in a frequency selective channel. The filter coefficients in MMSE DFE are optimized to suppress noise, intersymbol interference (ISI), and multiple access interference (MAI) with reasonable system complexity. For the above structure, we have presented the estimation of BER for a MMSE DFE using computer simulation experiments. The simulation includes the effects of additive white Gaussian noise, multipath fading and multiple access interference (MAI). Furthermore, the performance is compared with standard linear equalizer (LE) and RAKE receiver. Numerical and simulation results show that the MMSE DFE exhibits significant performance improvement over the standard linear equalizer (LE) and RAKE receiver.
基金supported by the National Key Research and Development Program of China(No.2018YFB1801802)the National Natural Science Foundation of China(Nos.61835006 and 62375143)。
文摘Broadband mode converters are essential devices for space-division and wavelength-division multiplexing systems.There are great challenges in the generation of higher-order modes above the third order with low loss and high mode purity employing all-fiber devices.In this paper,an all-fiber LP_(41)mode converter is proposed and fabricated by tapering a nine-core single-mode fiber bundle.Experimental results indicate that this all-fiber LP_(41)mode converter is low-loss,high-purity,and ultrabroadband.The insertion loss is less than 0.4 dB.The purity of odd LP_(41)at 1310 nm is 95.09%,and the operating bandwidth exceeds 280 nm.