Configuration and Kinematics of a 3-DOF Generalized Spherical Parallel Mechanism for Ankle Rehabilitation

The kinematic equivalent model of an existing ankle-rehabilitation robot is inconsistent with the anatomical structure of the human ankle,which influences the rehabilitation effect.Therefore,this study equates the human ankle to the UR model and proposes a novel three degrees of freedom(3-DOF)generalized spherical parallel mechanism for ankle rehabilitation.The parallel mechanism has two spherical centers corresponding to the rotation centers of tibiotalar and subtalar joints.Using screw theory,the mobility of the parallel mechanism,which meets the requirements of the human ankle,is analyzed.The inverse kinematics are presented,and singularities are identified based on the Jacobian matrix.The workspaces of the parallel mechanism are obtained through the search method and compared with the motion range of the human ankle,which shows that the parallel mechanism can meet the motion demand of ankle rehabilitation.Additionally,based on the motion-force transmissibility,the performance atlases are plotted in the parameter optimal design space,and the optimum parameter is obtained according to the demands of practical applications.The results show that the parallel mechanism can meet the motion requirements of ankle rehabilitation and has excellent kinematic performance in its rehabilitation range,which provides a theoretical basis for the prototype design and experimental verification.

Kinematics and Dynamics Analysis of a Quadruped Walking Robot with Parallel Leg Mechanism

It is desired to require a walking robot for the elderly and the disabled to have large capacity,high stiffness,stability,etc.However,the existing walking robots cannot achieve these requirements because of the weight-payload ratio and simple function.Therefore,Improvement of enhancing capacity and functions of the walking robot is an important research issue.According to walking requirements and combining modularization and reconfigurable ideas,a quadruped/biped reconfigurable walking robot with parallel leg mechanism is proposed.The proposed robot can be used for both a biped and a quadruped walking robot.The kinematics and performance analysis of a 3-UPU parallel mechanism which is the basic leg mechanism of a quadruped walking robot are conducted and the structural parameters are optimized.The results show that performance of the walking robot is optimal when the circumradius R,r of the upper and lower platform of leg mechanism are 161.7 mm,57.7 mm,respectively.Based on the optimal results,the kinematics and dynamics of the quadruped walking robot in the static walking mode are derived with the application of parallel mechanism and influence coefficient theory,and the optimal coordination distribution of the dynamic load for the quadruped walking robot with over-determinate inputs is analyzed,which solves dynamic load coupling caused by the branches’ constraint of the robot in the walk process.Besides laying a theoretical foundation for development of the prototype,the kinematics and dynamics studies on the quadruped walking robot also boost the theoretical research of the quadruped walking and the practical applications of parallel mechanism.

Gait Analysis of a Radial Symmetrical Hexapod Robot Based on Parallel Mechanisms

Most gait studies of multi-legged robots in past neglected the dexterity of robot body and the relationship between stride length and body height.This paper investigates the performance of a radial symmetrical hexapod robot based on the dexterity of parallel mechanism.Assuming the constraints between the supporting feet and the ground with hinges,the supporting legs and the hexapod body are taken as a parallel mechanism,and each swing leg is regarded as a serial manipulator.The hexapod robot can be considered as a series of hybrid serial-parallel mechanisms while walking on the ground.Locomotion performance can be got by analyzing these equivalent mechanisms.The kinematics of the whole robotic system is established,and the influence of foothold position on the workspace of robot body is analyzed.A new method to calculate the stride length of multi-legged robots is proposed by analyzing the relationship between the workspaces of two adjacent equivalent parallel mechanisms in one gait cycle.Referring to service region and service sphere,weight service sphere and weight service region are put forward to evaluate the dexterity of robot body.The dexterity of single point in workspace and the dexterity distribution in vertical and horizontal projection plane are demonstrated.Simulation shows when the foothold offset goes up to 174 mm,the dexterity of robot body achieves its maximum value 0.164 4 in mixed gait.The proposed methods based on parallel mechanisms can be used to calculate the stride length and the dexterity of multi-legged robot,and provide new approach to determine the stride length,body height,footholds in gait planning of multi-legged robot.

Analysis and Simulation of Kinematical Performances of Two Kinds of Parallel Mechanisms Based on the Plane Sprayer

Two kinds of 2-dof parallel mechanisms are proposed in this paper which can be used as the actuator for the plane sprayer. The direct and inverse kinematics solutions of the two kinds of mechanisms are derived on the end operating point and two workspaces are analyzed and compared. The kinematics models of the end operating point of two mechanisms are simulated by Matlab examples obtaining variation of kinematics parameters of these two mechanisms. The research of this paper provides the basis for the selection of mechanism, trajectory planning of the end operating point on the sprayer and often some practical value for trajectory analysis and structure design of the plane sprayer.

Application of the Morphological Analysis for the Synthesis Arrangements of Industrial Robots with Parallel Structure Mechanisms

The main features of morphological model of industrial robots are discussed, such as support system, manipulator and gripping device. These features are presented with the alternatives for their realization as separate modules. The examples of synthesis of arrangements of industrial robots are resulted on module principle with writing of their morphological formulas.

INVERSE KINEMATIC AND DYNAMIC ANALYSIS OF A 3-DOF PARALLEL MECHANISM

According to the structure character of the passive sub-chain of the 3TPS-TPparallel mechanism, the kinematic constraint equations of the movable platform are established,based on which the closed-form inverse kinematics formula of the parallel mechanism are presented.Through parting the spherical joints of the active sub-chains and using the force and momentequilibrium of both the active sub-chains and passive sub-chain, the constraint forces acting on theparted joints are determined. Subsequently, the analytic expressions of the actuator driving forcesare derived by means of the force equilibrium of the upper links of active sub-chains.

PERFORMANCE ANALYSIS AND KINEMATIC DESIGN OF PURE TRANSLATIONAL PARALLEL MECHANISM WITH VERTICAL GUIDE-WAYS

Performance analysis and kinematic design of the 3-PUU pure translational parallel mechanism with vertical guide-ways are investigated. Two novel performance indices, the critical slider stroke and the main section area of workspace, are defined; The expressions of two other indices, i.e. the global dexterity and global force transfer ratio are revised based on the main section of workspace. Using these indices, performance changes versus the varieties of dimensional parameters of mechanism are investigated in detail and the graphic descriptions of change tendencies of the performance indices are illustrated. By means of these obtained graphic descriptions, kinematic parameters for the 3-PUU pure translational parallel mechanism with better characteristics can be directly acquired.

FORWARD KINEMATICS ANALYSIS FOR A NOVEL 5-DOF PARALLEL MECHANISM USING TETRAHEDRON CONFIGURATIONS

Forward kinematics analysis of a novel 5-DOF parallel mechanism using tetrahedron configurations is presented. Such mechanism is suitable to many tasks requiring less than 6 DOFs. It consists of a movable platform connected to the base by five identical 6-DOF active limbs plus one active limb with its DOF being exactly the same as the specified DOF of the movable platform, which leads to its legs＇ topology 4-UPS/UPU. Based on the tetmhedron geometry, both closed-form solution with an extra sensor and numerical method using iterative algorithm are employed to obtain the forward kinematics solutions of the mechanism. Compared with the conventional methods, the proposed closed-form solution has the advantages in automatically avoiding unnecessary complex roots and getting a unique solution for the forward kinematics. Finally, an example shows that the proposed numerical algorithm is so effective that it enables a real-time forward kinematics solution to be achieved and the initial value can be chosen easily.

Generalized Kinematics Analysis of Hybrid Mechanisms Based on Screw Theory and Lie Groups Lie Algebras

Advanced mathematical tools are used to conduct research on the kinematics analysis of hybrid mechanisms,and the generalized analysis method and concise kinematics transfer matrix are obtained.In this study,first,according to the kinematics analysis of serial mechanisms,the basic principles of Lie groups and Lie algebras are briefly explained in dealing with the spatial switching and differential operations of screw vectors.Then,based on the standard ideas of Lie operations,the method for kinematics analysis of parallel mechanisms is derived,and Jacobian matrix and Hessian matrix are formulated recursively and in a closed form.Then,according to the mapping relationship between the parallel joints and corresponding equivalent series joints,a forward kinematics analysis method and two inverse kinematics analysis methods of hybrid mechanisms are examined.A case study is performed to verify the calculated matrices wherein a humanoid hybrid robotic arm with a parallel-series-parallel configuration is considered as an example.The results of a simulation experiment indicate that the obtained formulas are exact and the proposed method for kinematics analysis of hybrid mechanisms is practically feasible.

Dynamic Modeling and Analysis of 4UPS-UPU Spatial Parallel Mechanism with Spherical Clearance Joint

Clearance between the moving joints is unavoidable in real working process. At present, many researches are mainly focused on dynamics of plane revolute joint in plane mechanism, but few on dynamics of spatial spherical joint clearance in spatial parallel mechanism. In this paper, a general method is proposed for establishing dynamic equations of spatial parallel mechanism with spatial spherical clearance by Lagrange multiplier method. The kinematic model and contact force model of the spherical joint clearance were established successively. Lagrange multiplier method was used to deduce the dynamics equation of 4 UPS-UPU mechanism with spherical clearance joint systematically. The influence of friction coefficient on dynamics response of 4 UPS-UPU mechanism with spherical clearance joint was analyzed. Non-linear characteristics of clearance joint and moving platform were analyzed by Poincare map, phase diagram, and bifurcation diagram. The results show that variation of friction coefficient and clearance value had little effect on stability of the mechanism, but the chaotic phenomenon was found at spherical clearance joint. The research has theoretical guiding significance for improving the dynamic performance and avoiding of chaos of parallel mechanisms including spherical joint clearance.

Position, Singularity and Workspace Analysis of 3-PSR-O Spatial Parallel Manipulator

Although the parallel mechanisms have the advantages of high accuracy, velocity, stiffness, and payload capacity, the shortcomings of the space utilization and workspace limit the applications in the confined space. A novel 3 degrees of freedom spatial parallel manipulator 3-PSR-O（prismatic-spherical-revolute） is proposed, which possesses a compact architecture and extended workspace while maintaining the inherent advantages of the parallel mechanisms. The direct-inverse position, singularity and workspace are investigated. The mapping method is adopted in the position analysis, and the closed form solution is derived in the form of a six order equation. The singularity analysis of the mechanism is also carried out based on the geometrical constraints, including six singularity boundaries. A feature boundary, which is independent of the prismatic joints＇ stroke limit, is obtained by integrating the six singularity boundaries. According to the formation of the reachable workspace, a concept of basic workspace is also introduced and presented in the analytical way. By demarcating the basic workspace along the central height with the feature boundary, the reachable workspace can be derived and analyzed more efficiently. Finally, a comparative study on the space utilization between the 3-PSP parallel mechanism and the new mechanism is also presented. The area of feature boundary of the new mechanism is about 140% of the 3-PSP parallel mechanism, while its installation radius is only 1/2 of the 3-PSP parallel mechanism. The proposed parallel mechanism shows great space utilization, and is ideally suited for applications in confined space occasions such as immersion lithography, nano-imprint etc.

Kinematics Analysis and Singularity Avoidance of a Parallel Mechanism with Kinematic Redundancy

The kinematic redundancy is considered as a way to improve the performance of the parallel mechanism.In this paper,the kinematics performance of a three degree-of-freedom parallel mechanism with kinematic redundancy(3-DOF PM-KR)and the influence of redundant parts on the PM-KR are analyzed.Firstly,the kinematics model of the PM-KR is established.The inverse solutions,the Jacobian matrix,and the workspace of the PM-KR are solved.Secondly,the influence of redundancy on the PM-KR is analyzed.Since there exists kinematic redundancy,the PM-KR possesses fault-tolerant performance.By locking one actuating joint or two actuating joints simultaneously,the fault-tolerant workspace is obtained.When the position of the redundant part is changed,the workspace and singularity will be changed.The results show that kinematic redundancy can be used to avoid singularity.Finally,the simulations are performed to prove the theoretical analysis.

KINEMATIC ANALYSIS OF THE GENERAL SPATIAL 7R MECHANISM

The displacement, velocity and acceleration analysis of the general spatial 7R mechanism is discussed in this paper, fused on the method proposed in Ref. [2], an input-output algebra equation of the 16th degree in the tan-half-angle of the output angular displacement is derived. The derivation process and computation are considerably simple. A program written in Allanguage is used to derive the coefficients of displacement equations: therefore the amount of manual work is greatly decreased. The results are verified by a numerical example. The researches of this paper and Ref. [5]found a base for establishing an expert system of spatial mechanism analysis in the future.

DYNAMICS ANALYSIS OF 2-DOF SPHERICAL PARALLEL MECHANISM

The analytical formulations of the velocity and the acceleration of a 2-DOF spherical parallel mechanism are derived by the screw theory. Based on building its dynamics model by the principle of virtual work and reciprocal product of the screw, the equation of the motor moment is obtained. Through the transformation of dynamics model, the configuration space method of the dynamics equation and the corresponding coefficients are presented. Finally, the result of an example shows that the inertia moment and the gravity play a more important role than the coriolis and centrifugal moment, and the former is ten times of the latter in the magnitude. So, the latter can be neglected only when the velocity of mechanism is very slow.

Biological Jumping Mechanism Analysis and Modeling for Frog Robot

This paper presents a mechanical model of jumping robot based on the biological mechanism analysis of frog. By biological observation and kinematic analysis the frog jump is divided into take-offphase, aerial phase and landing phase. We find the similar trajectories of hindlimb joints during jump, the important effect of foot during take-off and the role of forelimb in supporting the body. Based on the observation, the frog jump is simplified and a mechanical model is put forward. The robot leg is represented by a 4-bar spring/linkage mechanism model, which has three Degrees of Freedom （DOF） at hip joint and one DOF （passive） at tarsometatarsal joint on the foot. The shoulder and elbow joints each has one DOF for the balancing function of arm. The ground reaction force of the model is analyzed and compared with that of frog during take-off. The results show that the model has the same advantages of low likelihood of premature lift-off and high efficiency as the frog. Analysis results and the model can be employed to develop and control a robot capable of mimicking the jumping behavior of frog.

Biped Walking Robot Based on a 2-UPU+2-UU Parallel Mechanism

Existing biped robots mainly fall into two categories： robots with left and right feet and robots with upper and lower feet. The load carrying capability of a biped robot is quite limited since the two feet of a walking robot supports the robot alternatively during walking. To improve the load carrying capability, a novel biped walking robot is proposed based on a 2-UPU＋2-UU parallel mechanism. The biped walking robot is composed of two identical platforms（feet） and four limbs, including two UPU（universal-prismatic-universal serial chain） limbs and two UU limbs. To enhance its terrain adaptability like articulated vehicles, the two feet of the biped walking robot are designed as two vehicles in detail. The conditions that the geometric parameters of the feet must satisfy are discussed. The degrees-of-freedom of the mechanism is analyzed by using screw theory. Gait analysis, kinematic analysis and stability analysis of the mechanism are carried out to verify the structural design parameters. The simulation results validate the feasibility of walking on rugged terrain. Experiments with a physical prototype show that the novel biped walking robot can walk stably on smooth terrain. Due to its unique feet design and high stiffness, the biped walking robot may adapt to rugged terrain and is suitable for load-carrying.

Error Analysis of Three Degree-of-Freedom Changeable Parallel Measuring Mechanism

A three degree-of-freedom (DOF) planar changeable parallel mechanism is designed by means of control of different drive parameters. This mechanism possesses the characteristics of two kinds of parallel mechanism. Based on its topologic structure, a coordinate system for position analysis is set-up and the forward kinematic solutions are analyzed. It was found that the parallel mechanism is partially decoupled. The relationship between original errors and position-stance error of moving platform is built according to the complete differential-coefficient theory. Then we present a special example with theory values and errors to evaluate the error model, and numerical error solutions are gained. The investigations concentrating on mechanism errors and actuator errors show that the mechanism errors have more influences on the position-stance of the moving platform. It is demonstrated that improving manufacturing and assembly techniques can greatly reduce the moving platform error. The small change in position-stance error in different kinematic positions proves that the error-compensation of software can improve considerably the precision of parallel mechanism.

A Hyper-redundant Elephant’s Trunk Robot with an Open Structure:Design,Kinematics,Control and Prototype

As for the complex operational tasks in the unstructured environment with narrow workspace and numerous obstacles,the traditional robots cannot accomplish these mentioned complex operational tasks and meet the dexterity demands.The hyper-redundant bionic robots can complete complex tasks in the unstructured environments by simulating the motion characteristics of the elephant’s trunk and octopus tentacles.Compared with traditional robots,the hyper-redundant bionic robots can accomplish complex tasks because of their flexible structure.A hyper-redundant elephant’s trunk robot(HRETR)with an open structure is developed in this paper.The content includes mechanical structure design,kinematic analysis,virtual prototype simulation,control system design,and prototype building.This design is inspired by the flexible motion of an elephant’s trunk,which is expansible and is composed of six unit modules,namely,3UPS-PS parallel in series.First,the mechanical design of the HRETR is completed according to the motion characteristics of an elephant’s trunk and based on the principle of mechanical bionic design.After that,the backbone mode method is used to establish the kinematic model of the robot.The simulation software SolidWorks and ADAMS are combined to analyze the kinematic characteristics when the trajectory of the end moving platform of the robot is assigned.With the help of ANSYS,the static stiffness of each component and the whole robot is analyzed.On this basis,the materials of the weak parts of the mechanical structure and the hardware are selected reasonably.Next,the extensible structures of software and hardware control system are constructed according to the modular and hierarchical design criteria.Finally,the prototype is built and its performance is tested.The proposed research provides a method for the design and development for the hyper-redundant bionic robot.

Design of Self‑Reconfigurable Multiarm Robot Mechanism Based on Deployable Kinematic Chains

As the structures of multiarm robots are serially arranged,the packaging and transportation of these robots are often inconvenient.The ability of these robots to operate objects must also be improved.Addressing this issue,this paper presents a type of multiarm robot that can be adequately folded into a designed area.The robot can achieve different operation modes by combining different arms and objects.First,deployable kinematic chains(DKCs)are designed,which can be folded into a designated area and be used as an arm structure in the multiarm robot mechanism.The strategy of a platform for storing DKCs is proposed.Based on the restrictions in the storage area and the characteristics of parallel mechanisms,a class of DKCs,called base assembly library,is obtained.Subsequently,an assembly method for the synthesis of the multiarm robot mechanism is proposed,which can be formed by the connection of a multiarm robot mechanism with an operation object based on a parallel mechanism structure.The formed parallel mechanism can achieve a reconfigurable characteristic when different DKCs connect to the operation object.Using this method,two types of multiarm robot mechanisms with four DKCs that can switch operation modes to perform different tasks through autonomous combination and release operation is proposed.The obtained mechanisms have observable advantages when compared with the traditional mechanisms,including optimizing the occupied volume during transportation and using parallel mechanism theory to analyze the switching of operation modes.

Research of 6-DOF Serial-Parallel Mechanism Platform for Stability Training of Legged-Walking Robot

The concept of legged-robot stability training with a training platform is proposed and a serial-parallel mechanism platform with 6 degrees of freedom is designed for this target. The designed platform is composed of 4-DOF parallel mechanism with spherical joints and prismatic pairs,and 2-DOF serial mechanism with prismatic pairs. With this design,the platform has advantages of low platform countertop,big workspace,high carrying capacity and high stiffness. On the basis of DOF analysis and computation of space mechanism,weight supporting auxiliary mechanism and raceways-balls supporting mechanism are designed,so as to improve the stiffness of designed large platform and payload capacity of servo motors. And then the whole structure design work of the platform is done. Meanwhile,this paper derives the analytical solutions of forward kinematics, inverse kinematics and inverse dynamics. The error analysis model of position and orientation is established. And then the simulation is done in ADAMS to ensure the correctness and feasibility of this design.