Spatial-temporal difference between nitrate in groundwater and nitrogen in soil based on geostatistical analysis

The study of temporal and spatial variations of nitrate in groundwater under different soil nitrogen environments is helpful to the security of groundwater resources in agricultural areas.In this paper,based on 320 groups of soil and groundwater samples collected at the same time,geostatistical analysis and multiple regression analysis were comprehensively used to conduct the evaluation of nitrogen contents in both groundwater and soil.From May to August,as the nitrification of groundwater is dominant,the average concentration of nitrate nitrogen is 34.80 mg/L;The variation of soil ammonia nitrogen and nitrate nitrogen is moderate from May to July,and the variation coefficient decreased sharply and then increased in August.There is a high correlation between the nitrate nitrogen in groundwater and soil in July,and there is a high correlation between the nitrate nitrogen in groundwater and ammonium nitrogen in soil in August and nitrate nitrogen in soil in July.From May to August,the area of low groundwater nitrate nitrogen in 0-5 mg/L and 5-10 mg/L decreased from 10.97%to 0,and the proportion of high-value area(greater than 70 mg/L)increased from 21.19%to 27.29%.Nitrate nitrogen is the main factor affecting the quality of groundwater.The correlation analysis of nitrate nitrogen in groundwater,nitrate nitrogen in soil and ammonium nitrogen shows that they have a certain period of delay.The areas with high concentration of nitrate in groundwater are mainly concentrated in the western part of the study area,which has a high consistency with the high value areas of soil nitrate distribution from July to August,and a high difference with the spatial position of soil ammonia nitrogen distribution in August.

A Hybrid Optimization Approach of Single Point Incremental Sheet Forming of AISI 316L Stainless Steel Using Grey Relation Analysis Coupled with Principal Component Analysiss

We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.

Design & Test of an Advanced Web Security Analysis Tool (AWSAT)

Considering the escalating frequency and sophistication of cyber threats targeting web applications, this paper proposes the development of an automated web security analysis tool to address the accessibility gap for non-security professionals. This paper presents the design and implementation of an automated web security analysis tool, AWSAT, aimed at enabling individuals with limited security expertise to effectively assess and mitigate vulnerabilities in web applications. Leveraging advanced scanning techniques, the tool identifies common threats such as Cross-Site Scripting (XSS), SQL Injection, and Cross-Site Request Forgery (CSRF), providing detailed reports with actionable insights. By integrating sample payloads and reference study links, the tool facilitates informed decision-making in enhancing the security posture of web applications. Through its user-friendly interface and robust functionality, the tool aims to democratize web security practices, empowering a wider audience to proactively safeguard against cyber threats.

Spatial-temporal Analysis of Emotions in Society in News

Spatial-temporal analysis of emotions in society has become popular in many studies integrating geography with the humanities,and has shown its influence on social sensing and geo-computation for social sciences.Emotions in society are often volatile,irrational,and vulnerable to the social environment.A critical challenge is to analyze changes in long-term and large-scale emotions in society.In this paper,we propose exploiting this challenge by using spatial-temporal analysis.After extracting emotional,temporal,and spatial information,a spatial standardization approach based on adataset of administrative district changes addresses the problem of Chinese toponym changes.Finally,over 1.7 million news data from the People’s Daily from 1956 to 2014 were collected to explore the changes,spatial distribution,and driving factors of emotions in society using spatial-temporal analysis.The experimental results found that the spatial-temporal analysis of emotions in society in the news is consistent with the results of related sociological research.

Modern applications of scanning electrochemical microscopy in the analysis of electrocatalytic surface reactions

Development of reaction-tailored electrocatalysts is becoming increasingly important as energy and environment are among key issues governing our sustainable future.Electrocatalysts are inherently optimized for application towards reactions of interest in renewable energy,such as those involved in water splitting and artificial photosynthesis,owing to its energy efficiency,simple fabrication,and ease of operation.In this view,it is important to secure logical design principles for the synthesis of electrocatalysts for various reactions of interest,and also understand their catalytic mechanisms in the respective reactions for improvements in further iterations.In this review,we introduce several key methods of scanning electrochemical microscopy(SECM)in its applications towards electrocatalysis.A brief history and a handful of seminal works in the SECM field is introduced in advancing the synthetic designs of electrocatalysts and elucidation of the operating mechanism.New developments in nano-sizing of the electrodes in attempts for improved spatial resolution of SECM is also introduced,and the application of nanoelectrodes towards the investigation of formerly inaccessible single catalytic entities is shared.

Spatial-temporal analysis of wetland landscape pattern under the influence of artificial dykes in the Yellow River delta

The influence of anthropogenic activities,especially artificial dykes,on the coastal wetland landscape is now considered as a serious problem to the coastal ecosystem.It is important and necessary to analyze changes of coastal landscape pattern under the influence of artificial dykes for the protection and management of coastal wetland.Our study aimed to reveal the quantitative characteristics of the coastal wetland landscape and its spatial-temporal dynamics under the influence of artificial dykes in the Yellow River delta(YRD).It was analyzed by the methods of the statistical analysis of landscape structure,five selected landscape indices and the changes of spatial centroids of three typical wetland types,including reed marshes,tidal fiats and aquaculture-salt fields.The results showed that:(1)Reduction of wetland area,especially the degradation of natural wetlands,had been the principal problem since the dykes were constructed in the YRD.The dykes created conditions for the development of artificial wetlands.However,the new born artificial wetlands were still less than the vanished natural wetlands.(2)Compared with the open area,the building of artificial dykes significantly speeded up the changes of landscape patterns and the aggravation of the landscape fragmentation in the closed area.(3)The changes of area-weighted centroids of three typical wetland landscapes were greatly affected by dykes,and the movement of the centroid of the aquaculture-salt field was very sensitive to the dykes constructed in the corresponding period.

DAVS:Dockerfile Analysis for Container Image Vulnerability Scanning

Container technology plays an essential role in many Information and Communications Technology(ICT)systems.However,containers face a diversity of threats caused by vulnerable packages within container images.Previous vulnerability scanning solutions for container images are inadequate.These solutions entirely depend on the information extracted from package managers.As a result,packages installed directly from the source code compilation,or packages downloaded from the repository,etc.,are ignored.We introduce DAVS–A Dockerfile analysis-based vulnerability scanning framework for OCI-based container images to deal with the limitations of existing solutions.DAVS performs static analysis using file extraction based on Dockerfile information to obtain the list of Potentially Vulnerable Files(PVFs).The PVFs are then scanned to figure out the vulnerabilities in the target container image.The experimental shows the outperform of DAVS on detecting Common Vulnerabilities and Exposures(CVE)of 10 known vulnerable images compared to Clair–the most popular container image scanning project.Moreover,DAVS found that 68%of real-world container images are vulnerable from different image registries.

Neutron Activation Analysis and Scanning Electron Microscopy of Phytoplankton in the Coastal Zone of Crimea (The Black Sea)

The physiology and ecology of planktonic organisms are influenced by the concentration, chemical speciation and resulting bioavailability of some trace metals. The determination of the elemental structure of phytoplankton is important for interpretation of physiological and functional states of coastal ecosystems. The present study is focused on the structure and elemental composition of the phytoplankton assemblages from the different coastal zones by instrumental neutron activation analysis (INAA), scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDS). For the first time these complementary techniques were simultaneously applied to study the Black Sea phytoplankton. The concentrations of 45 elements in the coastal phytoplankton communities used as bioindicator of inorganic contamination of the Black Sea coastal area near Sevastopol, Ukraine, were determined. Phytoplankton samples were collected by total tows of the plankton net with 35 μm pore size at 3 stations situated in polluted and relatively pristine water areas of the Sevastopol coastal zone during autumn period of the phytoplankton growth. The concentration of Mg, Al, Sc, Ti, V, Mn, As, Rb, Ba, Th and Fe, Cr increases exponentially from relatively pristine station to more polluted station and 10-times and 3-times greater, respectively, in the phytoplankton of the Sevastopol Bay. The rare-earth elements have relatively the same concentration values less than 1 μg/g and tend to accumulate in the phytoplankton from the polluted station in the Sevastopol Bay. The obtained results are in a good agreement with the elemental concentration data in the oceanic plankton, plankton communities from the White Sea and the Black Sea. Using energy-dispersive X-ray spectrometry the mineral particles of unknown origin and impurities of copper (0.42% by weight) in the phytoplankton at the polluted station and zinc (0.57% by weight) at the relatively pristine station were determined.

Analysis of Systematic Error Influences on Accuracy of Airborne Laser Scanning Altimetry

The error sources related to the laser rangefinder, GPS and INS are analyzed in details. Several coordinates systems used in airborne laser scanning are set up, and then the basic formula of system is given. This paper emphasizes on discussing the kinematic offset correction between GPS antenna phase center and laser fired point. And kinematic time delay influence on laser footprint position, the ranging errors, positioning errors, attitude errors and integration errors of the system are also explored. Finally, the result shows that the kinematic time delay can be neglected as compared with other error sources. The accuracy of the coordinates is not only influenced by the amplitude of the error, but also controlled by the operation parameters such as flight height, scanning angle amplitude and attitude magnitude of the platform.

Spatial-temporal Evolution Analysis on Land Use Multifunctionality in the China-Vietnam Border Area

Exploring the spatial and temporal evolution characteristics of the border land use multifunctionality(LUMF)provides insights for taking advantage of border land use and optimizing border land use policies.Based on the improved Technique for Order Preference by Similarity to an Ideal Solution(TOPSIS)mode,this study identifies and evaluates the LUMFs in the China-Vietnam border area between 2000 and 2018 from the perspectives of agricultural production,social security,ecological service,landscape recreation,and national security.The results show that:1)The comprehensive land use functions in most counties and cities continued to be improved.2)The comprehensive land use function exhibits remarkable spatial divergence and aggregation characteristics.The high-value area of the agricultural production function and social security function evolves from the east to the west.In addition,the spatial evolution of ecological service function is complicated,without an obvious spatial divergence and aggregation pattern.The landscape recreation function shows different spatial differentiation characteristics in the early and middle stage,and forms a large cluster in the later stage.Finally,the spatial evolution pattern of the national security function is significant.3)Designing differentiated border land policies,improving border land use security,and establishing a long-term mechanism for ecological protection and ecological compensation can aid in optimizing the LUMF level in the border area.

Numerical Investigation of Laser Surface Hardening of AISI 4340 Using 3D FEM Model for Thermal Analysis of Different Laser Scanning Patterns

Laser surface hardening is becoming one of the most successful heat treatment processes for improving wear and fatigue properties of steel parts. In this process, the heating system parameters and the material properties have important effects on the achieved hardened surface characteristics. The control of these variables using predictive modeling strategies leads to the desired surface properties without following the fastidious trial and error method. However, when the dimensions of the surface to be treated are larger than the cross section of the laser beam, various laser scanning patterns can be used. Due to their effects on the hardened surface properties, the attributes of the selected scanning patterns become significant variables in the process. This paper presents numerical and experimental investigations of four scanning patterns for laser surface hardening of AISI 4340 steel. The investigations are based on exhaustive modelling and simulation efforts carried out using a 3D finite element thermal analysis and structured experimental study according to Taguchi method. The temperature distribution and the hardness profile attributes are used to evaluate the effects of heating parameters and patterns design parameters on the hardened surface characteristics. This is very useful for integrating the scanning patterns’ features in an efficient predictive modeling approach. A structured experimental design combined to improved statistical analysis tools is used to assess the 3D model performance. The experiments are performed on a 3 kW Nd:Yag laser system. The modeling results exhibit a great agreement between the predicted and measured values for the hardened surface characteristics. The model evaluation reveals also its ability to provide not only accurate and robust predictions of the temperature distribution and the hardness profile as well an in-depth analysis of the effects of the process parameters.

ANALYSIS OF HUMAN PLACENTA BY ^(31)P NUCLEAR MAGNETIC RESONANCE AND THIN-LAYER CHROMATOGRAPHY SCANNING COMBINED WITH THE CORRECTIVE METHOD OF ABSORBANCE PROPORTIONAL COEFFICIENT

Five phospholipids in human placenta were determined by phosphorus 31 nuclear magnetic resonance(^(31)P NMR)spectroscopy and thin-layer chromatography(TLC) scanning combined with the corrective method of absorbance proportional coefficient. The NMR spectrometer used this investigation was a Bruker AM-500 spectrometer operating at 202.4 MHz for ^(31)P chemical shifts are relative to 85% phosphoric acid. TIC was carried out by silica gel H plate developed in chloroform-methanol-glacial acetic acid-ethanol-water(25:4:6:2:0.5),with Vaskovsky reagent as colour -developing agent of phospholipids.

Feature Extraction of Sectorial Scan Image of Thick-Walled Electron Beam Welding Seam Based on Principal Component Analysis

A feature extraction method was proposed to sectorial scan image of Ti-6Al-4V electron beam welding seam based on principal component analysis to solve problem of high-dimensional data resulting in timeconsuming in defect recognition. Seven features were extracted from the image and represented 87. 3% information of the original data. Both the extracted features and the original data were used to train support vector machine model to assess the feature extraction performance in two aspects: recognition accuracy and training time. The results show that using the extracted features the recognition accuracy of pore,crack,lack of fusion and lack of penetration are 93%,90.7%,94.7% and 89.3%,respectively,which is slightly higher than those using the original data. The training time of the models using the extracted features is extremely reduced comparing with those using the original data.

T-Scan咬合分析系统在口腔治疗中的研究进展

在口腔临床治疗中,咬合功能的测量和分析对治疗发挥不可忽略的作用,而以往测量咬合状态的方法受口腔医师主观影响,准确性不高,无法量化。大量研究显示T-Scan咬合分析系统能精确测量不同咬合状态下的咬合力与时间实时的关系,精确记录咬合接触时间、力量、面积,并动态分析咬合接触情况。在颞颌关节紊乱疾病、正畸正颌、修复和种植、牙周病等多种口腔疾病治疗中,该系统协助临床医生执行精确和有针对性的咬合诊断和调整,并通过可预测和数值测量的治疗结果评价减少咬合并发症发生,获得良好的治疗效果。该系统量化的数据以可视化的方式展示出来,可最大限度地促进医患沟通,更能满足现代口腔疾病临床治疗的需求。本文就T-Scan咬合分析系统的特点及其在口腔临床中的应用进展做一综述。

Residual curvature migration velocity analysis for angle domain common imaging gathers

Pre-stack depth migration velocity analysis is one of the keys to influencing the imaging quality of pre-stack migration.In this paper we cover a residual curvature velocity analysis method on angle-domain common image gathers（ADCIGs） which can depict the relationship between incident angle and migration depth at imaging points and update the migration velocity.Differing from offset-domain common image gathers（ODCIGs）,ADCIGs are not disturbed by the multi-path problem which contributes to imaging artifacts,thus influencing the velocity analysis.On the basis of horizontal layers,we derive the residual depth equation and also propose a velocity analysis workflow for velocity scanning.The tests to synthetic and field data prove the velocity analysis methods adopted in this paper are robust and valid.

Analysis on Features of Spatial and Temporal Distribution of Thunderstorm in Shanghai

Based in 11 daily weather observation station data in Shanghai from 1971 to 2008,a careful research and analysis on the features of thunderstorms spatial and temporal distribution and thunderstorm movement in Shanghai was carried out by using the statistical software of SAS,the method of Mann-Kendall test and wavelets. The results showed that the average annual numbers of thunderstorms days were 26.1,and inter-annual thunderstorm variability was obvious,the annual number of thunderstorm days had a decreasing trend,its value of decreasing days was about-0.418 5 d/10 a. Mann-Kendall test showed that there was an abrupt change in 2000. The seasonal variation of thunderstorm in Shanghai was explicit. The period from March to September was the season when thunderstorm occurred most frequently,about 64.9% of the thunderstorms in a year took place in summer. The results from wavelets analysis showed that the variation cycle period of the annual number of thunderstorms days was about 3,5,12 and 20 years.

Integration system research and development for three-dimensional laser scanning information visualization in goaf

An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, cloud data de-noising optimization, construction, display and operation of three-dimensional model, model editing, profile generation, calculation of goaf volume and roof area, Boolean calculation among models and interaction with the third party soft ware. Concerning this system with a concise interface, plentiful data input/output interfaces, it is featured with high integration, simple and convenient operations of applications. According to practice, in addition to being well-adapted, this system is favorably reliable and stable.

Tupu methods of spatial-temporal pattern on land use change:a case study in the Yellow River Delta

Comprehensive study on land-use change of spatial pattern and temporal process is the key component in LUCC study nowadays. Based on the theories and methods of Geo-information Tupu (Carto-methodology in Geo-information, CMGI), integration of spatial pattern and temporal processes of land-use change in the Yellow River Delta (YRD) are studied in the paper, which is supported by ERDAS and ARC/INFO software. The main contents include: (1) concept models of Tupu by spatial-temporal integration on land-use change, whose Tupu unit is synthesized by "Spatial·Attribute·Process" features and composed of relatively homogeneous geographical unit and temporal unit; (2) data sources and handling process, where four stages of spatial features in 1956, 1984, 1991, and 1996 are acquired; (3) integration of series of temporal-spatial Tupu, reconstruction series of "Arising" Tupu, spatial-temporal Process Tupu and the spatial temporal Pattern Tupu on land-use change by remap tables; (4) Pattern Tupu analysis on land-use change in YRD during 1956-1996; and (5) spatial difference of the Pattern Tupu analysis by dynamic Tupu units. The various landform units and seven sub-deltas generated by the Yellow River since 1855 are different. The Tupu analysis on land-use in the paper is a promising try on the comprehensive research of "spatial pattern of dynamic process" and "temporal process of spatial pattern" in LUCC research. The Tupu methodology would be a powerful and efficient tool on integrated studies of spatial pattern and temporal process in Geo-science.

Analysis on the Temporal and Spatial Characteristics and Causes of Cold Wave in Qinhuangdao

[Objective] The aim was to study the temporal and spatial characteristics and causes of cold wave in Qinhuangdao.[Method] Based on temperature data from five surface meteorological stations in Qinhuangdao from 1970 to 2009 and the latest standards issuing cold wave early warning signal,statistical analysis on the temporal and spatial distribution of cold wave was carried out,and the causes were discussed preliminarily.[Result] From 1970 to 2009,the frequencies of blue and yellow cold wave in Qinhuangdao region were 2 334 and 105 times respectively,and cold wave occurred most frequently in Qinglong County and least frequently in Lulong County,which was related to the effects of underlying surface,latitude and altitude.Cold wave might happen from September to next May,and the earliest occurrence date was September 9,while the latest end date was May 26.In addition,the frequency of cold wave was the highest in January and lowest in May.From 1970 to 2009,blue cold wave occurred most frequently in 1972 and 1979 and least frequently in 1984,while the frequency of yellow cold wave was the highest in 1979 and lowest in 9 years.From decadal variation,cold wave appeared most frequently in the 1970s and least frequently in the 1990s.With the increase of temperature,the frequency of cold wave showed decrease trend,and the beginning date tended to postpone,while its end date advanced,and it showed that the changes of cold wave was mainly caused by climate warming.[Conclusion] The study could provide theoretical guidance for the meteorological disaster prevention and reduction and local agricultural service.