Modification of SDOF model for reinforced concrete beams under close-in explosion

In this paper,a modified single-degree-of-freedom(SDOF)model of reinforced concrete(RC)beams under close-in explosion is proposed by developing the specific impulse equivalent method and flexural resistance calculation method.The equivalent uniform specific impulse was obtained based on the local conservation of momentum and global conservation of kinetic energy.Additionally,the influence of load uniformity,boundary condition and complex material behaviors(e.g.strain rate effect,hardening/softening and hoop-confined effect)was considered in the resistance calculation process by establishing a novel relationship between external force,bending moment,curvature and deflection successively.The accuracy of the proposed model was verified by carrying out field explosion tests on four RC beams with the scaled distances of 0.5 m/kg~(1/3)and 0.75 m/kg~(1/3).The test data in other literatures were also used for validation.As a result,the equivalent load implies that the blast load near the mid-span of beams would contribute more to the maximum displacement,which was also observed in the tests.Moreover,both the resistance model and test results declare that when the blast load becomes more concentrated,the ultimate resistance would become lower,and the compressive concrete would be more prone to softening and crushing.Finally,based on the modified SDOF model,the calculated maximum displacements agreed well with the test data in this paper and other literatures.This work fully proves the rationality of the modified SDOF method,which will contribute to a more accurate damage assessment of RC structures under close-in explosion.

Simulation of crack coalescence mechanism underneath single and double disc cutters by higher order displacement discontinuity method

The present research is focused on the numerical crack coalescence analysis of the micro-cracks and cracks produced during the cutting action of TBM disc cutters. The linear elastic fracture mechanics(LEFM) concepts and the maximum tangential stress criterion are used to investigate the micro crack propagation and its direction underneath the excavating discs. A higher order displacement discontinuity method with quadratic displacement discontinuity elements is used to estimate the stress intensity factors near the crack tips. Rock cutting mechanisms under single and double type discs are simulated by the proposed numerical method.The main purposes of the present modeling are to simulate the chip formation process of indented rocks by single and double discs.The effects of specific disc parameters(except speed) on the thrust force Ft, the rolling force Fr, and the specific energy ES are investigated. It has been shown that the specific energy(energy required to cut through a unit volume of rock) of the double disc is less than that of the single disc. Crack propagation in rocks under disc cutters is numerically modeled and the optimum ratio of disc spacing S to penetration depth Pd(i.e. S/Pd ratio) of about 10 is obtained, which is in good agreement with the theoretical and experimental results cited in the literature.

Re-discussing the content of the prescription rights of midwives under certain circumstances using the Delphi method

Objective： This study sought to investigate the content of the prescription rights and the prescription types of midwives under certain circumstances in China. Methods： The Delphi method was used to consult 18 nursing experts and 14 medical experts, A total of 30 experts finished the consulting. The reliability of the expert opinions was analyzed to determine the specific situations in which midwives may write prescriptions, the content of the prescription rights and the prescription types. Results： In six specific circumstances （uterine contraction fatigue, uterine contractions that are too strong, postpartum hemorrhage, premature rupture of the membranes, normal delivery and neonatal asphyxia）, midwives have the right to prescribe and administer medication, including 20 drugs and 13 auxiliary examinations. Of these drugs and examinations, 51.5% of the drugs and adjuvant examination prescriptions tend to be independent prescriptions, 30.3% tend to be protocol prescriptions, and 18.2% are similar to both types. Conclusions： The midwives should be granted some prescription rights to enhance their autonomy and the professionalism of midwifery.

Mutagenesis at Specific Genomic Loci of Amphioxus Branchiostoma belcheri Using TALEN Method

Amphioxus, also called lancelet or cephalochordate, is a promising model organism owning to its particularly evolu- tionary position, simple genome content and comparable body plan to that of vertebrates （Holland et aL, 2004; Bertrand and Escriva, 2011）. However, use of amphioxus as a model or- ganism has been limited for many years because of lack of an efficient genomic modification method. Recently, several revolutionary gene targeting methods that could induce directed mutations, insertions and deletions at intended target sites, have been developed （Gaj et al., 2013）.

Analysis of Rolling Pressure in Asymmetrical Rolling Process by Slab Method

The plane strain asymmetrical rolling was analyzed using slab method. The contact arc was replaced by parabola, and the constant surface friction status was adopted during the analysis. The deformation area was divided into three zones according to the direction of the friction. Then, the three zones were studied, respectively. A rolling force model and a rolling torque model were developed based on the analysis, and they were used to analyze the influ- ence of asymmetrical rolling factors on deformation area and unit pressure if they had good precision which was determined by comparing the calculated results with the measured ones.