Speeding up the Internationalization of Raw Silk Standard

China is the main silk producer in the world, whose RSS (Raw Silk Standard)is widely approved in international trade. After entering WTO, China needs to revise the RSSaccording to the changes of silk industry and develop advanced electronic testing system and improvetesting means, so as to promote the internationlization of the RSS. 1. The international standingof Chinese silk The silk consisting of 18 amino acids has the similar protein structure to people'sskin. It is enjoyed by most people for it' s comfortable, magnificent and noble features and ispraised to be the second skin for its unique effects on health and adjusting the body water. In the21st century, silk is the main international fashion as the representative of green products.

Xi'an Aviation Engine Co.——Speeding up the Pace of Technical Renovation, Raising the Capacity of Subcontracting and Export Earnings

In recent years, the subcontracting production for foreign trade of the Xi’an Aviation Engine Company (XAEC), a foreign trade production base of China, has achieved rapid development. In 1994, the company’s export earnings from foreign trade made a breakthrough at US$11 million, and it was commended by the State Economic

Speeding Up Tianjin's Municipal Highway Construction By Making Full Use of Foreign Capital

To introduce foreign capital for the municipal highway construction is a great measure to meet the development of the socialist market economy and to reform the investment system for the municipal highway construction. The aim of the reform lies in taking the construction and management of the municipal highway facilities as an industry to operate, widening the investment channel of the municipal highway construction and gradually forming a benign cycle of investment-construc-

Speeding Up the Transformation of the Operational Mechanism And Further Developing the International Market

According to customs statistics, China’s exports of machinery and electric products in 1996 were worth US$ 48.21 billion, an increase of 9.9 percent over the preceding year, and 8.4 percent higher than the growth rate of the nation’s total exports. The proportion of machinery and electric product exports in the nation’s total foreign trade volume\ increased from 29.5 percent in 1995 to 31.9 percent in 1996, a growth at 2.4 percent.

SPEEDING UP HOUSING CONSTRUCTION

Housing isone of the necessities of humansfor existence and development.The Chinese government hasalways attached great importanceto housing construction;especially in recent years,thepriority development of housingconstruction has been seen inthe real estate and propertiesindustry.Hou Jie,Minister ofConstruction,not long ago wrotean article summarizing theachievements made in this sectorand drawing a blueprint forspeedup of housing constructionand the improvement of livingconditions in the future.It willprovide a vast vista for thedevelopment of China’s buildingindustry and its internationalcooperation.

Exploration in Tarim Basin Speeding up

ＥｘｐｌｏｒａｔｉｏｎｉｎＴａｒｉｍＢａｓｉｎＳｐｅｅｄｉｎｇｕｐＡｃｃｏｒｄｉｎｇｔｏｔｈｅｐｌａｎｍａｄｅｂｙｔｈｅＴａｒｉｍＰｅｔｒｏｌｅｕｍＥｘｐｌｏｒａｔｉｏｎａｎｄＤｅｖｅｌｏｐｍｅｎｔＢｕｒｅａｕｏｎＯｃｔｏｂｅｒ３１，１９９５，ｅｉｇ...

SPEEDING UP THE CONSTRUCTION OF HIGH-SPEED RAILWAYS IN CHINA

High-speed railways have the merits of high speed, high transport capacity, low consumption of energy, less pollution, less occupation of land, and greater safety. The development of high-speed railways is suitable for the national conditions in China.The authors suggest that, with the Hu-Ning (Shanghai-Nanjing) section of the Jing-Hu (Beijing-Shanghai) Railway as the starting point, a high-speed dedicated passenger railway line be built to realize the separate transportation of passengers and goods, thus easing the strain on transport in East China, accumulating experience for the future development of high-speed railways, and bringing along the development of high and new technology industries.

Speeding up the Development of Space Industry to Meet the New Challenge

This paper discusses the urgency to further develop China’s space technological industry;analyzes the gaps between China and other advanced countries in space industry,including technological level,development scale,application scope and investment;describes the current severe situation that the China’s space industry is faced with and proposes the overall objective,guiding principles and major tasks of China’s space technological sector in the Ninth-Five Year Plan and the coming decade.Finally,it proposes some policies and effective measures to speed up the development of China’s space industry to meet the challenge in the 21st century.

Speeding Up

In the wake of the global financial crisis, China has amazed the world with the speed of its economic recovery. But what has been even more surprising is the speed of its railway evolution.

Speeding Up the Auto Industry

Chinese carmakers find the way to become more technologically intensive In the classic economic model, there is land,labor and capital. Each plays a role in economic development through its supply, and development cannot occur with-

Attack-Resilient Distributed Cooperative Control of Virtually Coupled High-Speed Trains via Topology Reconfiguration

Dear Editor,This letter addresses the resilient distributed cooperative control problem of a virtually coupled train convoy under stochastic disturbances and cyber attacks.The main purpose is to achieve distributed coordination of virtually coupled high-speed trains with the prescribed inter-train distance and same cruise velocity.

Establishment of the thermo-mechanical coupling model of axle box bearings with track irregularity excitation and analysis of its temperature characteristics

As an important component of the running gear of high-speed trains,axle box bearings can cause lubricating grease failure and damage to bearing components under continuous high-temperature operation,which will affect the normal operation of highspeed trains.Therefore,bearing temperature is one of the key parameters to be monitored in the online monitoring system for trains.Based on the thermal network method,this paper establishes a thermal network model for the axle box bearing,considering the radial thermal deformation of the double-row tapered roller bearing components caused by the oil film characteristics and the temperature variations of the lubricating grease.A thermo-mechanical coupling model for the grease-lubricated double-row tapered roller axle box bearing of high-speed trains with track irregularity excitation is established.The correctness of the model is verified using the test bench data,and the temperature of the bearing at different rotational speeds,loads,fault sizes,and ambient temperatures are investigated.

Complementary-Label Adversarial Domain Adaptation Fault Diagnosis Network under Time-Varying Rotational Speed and Weakly-Supervised Conditions

Recent research in cross-domain intelligence fault diagnosis of machinery still has some problems,such as relatively ideal speed conditions and sample conditions.In engineering practice,the rotational speed of the machine is often transient and time-varying,which makes the sample annotation increasingly expensive.Meanwhile,the number of samples collected from different health states is often unbalanced.To deal with the above challenges,a complementary-label(CL)adversarial domain adaptation fault diagnosis network(CLADAN)is proposed under time-varying rotational speed and weakly-supervised conditions.In the weakly supervised learning condition,machine prior information is used for sample annotation via cost-friendly complementary label learning.A diagnosticmodel learning strategywith discretized category probabilities is designed to avoidmulti-peak distribution of prediction results.In adversarial training process,we developed virtual adversarial regularization(VAR)strategy,which further enhances the robustness of the model by adding adversarial perturbations in the target domain.Comparative experiments on two case studies validated the superior performance of the proposed method.

Analysis on flutter performance of flexible photovoltaic support based on full-order method

Taking a three-cable flexible photovoltaic(PV)support structure as the research subject,a finite element model was established.Utilizing a full-order flutter analysis method,the flutter critical wind speed and flutter frequency of the flexible PV support structure at a tilt angle of 0°were calculated.The results showed good agreement with wind tunnel test data.Further analysis examined the pretension effects in the load-bearing and stabilizing cables on the natural frequency and flutter critical wind speed of the flexible PV support structure.The research findings indicate increasing the pretension in the load-bearing cables significantly raises the natural frequencies of the first four modes.Specifically,as the pretension in the load-bearing cables increases from 22 to 102 kN,the flutter critical wind speed rises from 17.1 to 21.6 m/s.By contrast,the pretension in the stabilizing cable has a smaller effect on the natural frequency and flutter critical wind speed of the flexible PV support structure.When the pretension in the stabilizing cable increased from 22 to 102 kN,the flutter critical wind speed increased from 17.1 to 17.7 m/s.For wind-resistant design of flexible PV support structures,it is recommended to prioritize increasing the pretension in the load-bearing cables to enhance the structural flutter performance.

Research on the Mechanical Analysis of Run-Up Speed in Pole Vaulting and the Application of Key Auxiliary Training Methods

Analyzing from the perspective of physics mechanics,the pole vault is a project which transforms kinetic energy into elastic potential energy.The magnitude of kinetic energy depends on the vaulter’s approaching speed,while the magnitude of elastic potential energy depends on height.Therefore,the run-up speed determines the vaulter’s performance in pole vault to a certain extent.the horizontal speed of the pole-holding approach phase transitioning into vertical upward speed plays a crucial role in executing pole vault techniques,and the model of approaching speed establishes a theoretical foundation for vaulters to break through the pole limitation.In terms of specialized technical assistance in speed training,short-distance speed exercises are used in the approaching phase;in the swinging phase,gymnastic rings,single bar and suspension rope exercises are employed for suspension;in the stretch phase,trampoline exercises play a important role in rotation phase,etc.

Effects of the profile of a supercavitating vehicle's front-end on supercavity generation

The authors designed three different front profiles for supercavitating vehicles based on cavity theory and the Granville streamlined equation are designed. Experiments were done using these front profiles in the Northwestern Polytechnical University high-speed water tunnel. The experiments indicated that the critical volume of gas required for supercavitation is affected by the axial distribution of the front-end＇s slope. The experimental data showed critical gas flow rates required for the three designs were less than rood-l, with the greatest decrease 24%. The experimental results also showed the supercavitation generation speeds of the models were faster than mod-1 by up to 32.4%. This verifies that the front profile of a supercaviting vehicle effects supercavity generation speed and critical gas flow rates. The smaller the changes in axial distribution of pressure, the higher the supercavity generation speed. The smaller the changes in curvature distribution of axial, the smaller the critical gas flow rates.

Effects of the extrusion parameters on microstructure,texture and room temperature mechanical properties of extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy

Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed slightly.The dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)increased.With the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical<2111>-<1123>rare-earth(RE)textures.The alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening contributions.These results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.

Numerical Analysis of Urban-Rail Vehicle/Tunnel Aerodynamic Interaction

The pressure wave generated by an urban-rail vehicle when passing through a tunnel affects the comfort of passengersand may even cause damage to the train and related tunnel structures.Therefore,controlling the trainspeed in the tunnel is extremely important.In this study,this problem is investigated numerically in the frameworkof the standard k-εtwo-equation turbulence model.In particular,an eight-car urban rail train passingthrough a tunnel at different speeds(140,160,180 and 200 km/h)is considered.The results show that the maximumaerodynamic drag of the head and tail cars is most affected by the running speed.The pressure at selectedmeasuring points on the windward side of the head car is very high,and the negative pressure at the side windowof the driver’s cab of the tail car is also very large.From the head car to the tail car,the pressure at the same heightgradually decreases.The positive pressure peak at the head car and the negative pressure peak at the tail car aregreatly affected by the speed.

Multi-Scenario Probabilistic Load Flow Calculation Considering Wind Speed Correlation

As the proportion of newenergy increases,the traditional cumulant method(CM)produces significant errorswhen performing probabilistic load flow(PLF)calculations with large-scale wind power integrated.Considering the wind speed correlation,a multi-scenario PLF calculation method that combines random sampling and segmented discrete wind farm power was proposed.Firstly,based on constructing discrete scenes of wind farms,the Nataf transform is used to handle the correlation between wind speeds.Then,the random sampling method determines the output probability of discrete wind power scenarios when wind speed exhibits correlation.Finally,the PLF calculation results of each scenario areweighted and superimposed following the total probability formula to obtain the final power flow calculation result.Verified in the IEEE standard node system,the absolute percent error(APE)for the mean and standard deviation(SD)of the node voltages and branch active power are all within 1%,and the average root mean square(AMSR)values of the probability curves are all less than 1%.