Newly Design Porous/Sponge Red Phosphorus@Graphene and Highly Conductive Ni2P Electrode for Asymmetric Solid State Supercapacitive Device With Excellent Performance

Supercapacitors have attracted much attention in the field of electrochemical energy storage.However,material preparation,stability,performance as well as power density limit their applications in many fields.Herein,a sponge-like red phosphorus@graphene(rP@rGO)negative electrode and a Ni2P positive electrode were prepared using a simple one-step method.Both electrodes showed excellent performances(294 F g^−1 and 1526.6 F g^−1 for rP@rGO and Ni2P,respectively),which seem to be the highest among all rP@rGO-and Ni2P-based electrodes reported so far.The asymmetric solid-state supercapacitor was assembled by sandwiching a gel electrolyte-soaked cellulose paper between rP@rGO and Ni2P as the negative and positive electrodes.Compared to other asymmetric devices,the device,which attained a high operating window of up to 1.6 V,showed high energy and power density values of 41.66 and 1200 W kg−1,respectively.It also has an excellent cyclic stability up to 88%after various consecutive charge/discharge tests.Additionally,the device could power commercial light emitting diodes and fans for 30 s.So,the ease of the synthesis method and excellent performance of the prepared electrode materials mat have significant potential for energy storage applications.

High-yield red phosphorus sponge mediated robust lithium-sulfur battery

Although lithium-sulfur(Li-S)batteries with high specific energy exhibit great potential for next-generation energy-storage systems,their practical applications are limited by the growth of Li dendrites and lithium polysulfides(LiPSs)shuttling.Herein,a highly porous red phosphorus sponge(HPPS)with well distributed pore structure was efficiently prepared via a facile and largescale hydrothermal process for polysulfides adsorption and dendrite suppression.As experimental demonstrated,the porous red phosphorus modified separator with increased active site greatly promotes the chemisorption of LiPSs to efficiently immobilize the active sulfur within the cathode section,while Li metal anode activated by Li_(3)P interlayer with abundant ionically conductive channels significantly eliminates the barrier for uniform Li^(+)permeation across the interlayer,contributing to the enhanced stability for both S cathode and Li anode.Mediated by the HPPS,long-term stability of 1,200 h with minor voltage hysteresis is achieved in symmetric cells with Li_(3)P@Li electrode while Li-S half-cell based on HPPS modified separator delivers an outperformed reversibility of 783.0 mAh·g^(−1)after 300 cycles as well as high-rate performance of 694.5 mAh·g^(−1)at 3 C,which further boosts the HPPS tuned full cells in practical S loading(3 mg·cm^(−2))and thin Li3P@Li electrode(100μm)with a capacity retention of 71.8%after 200 cycles at 0.5 C.This work provides a cost-effective and metal free mediator for simultaneously alleviating the fundamental issues of both S cathode and Li anode towards high energy density and long cycle life Li-S full batteries.