The porous spherical LiFePO4/C powders were prepared by spray drying and carbothermal method (SDCTM). Cheaper trivalent iron ion was used as the precursor. The pure olivine phase can be prepared with the spray dryin...The porous spherical LiFePO4/C powders were prepared by spray drying and carbothermal method (SDCTM). Cheaper trivalent iron ion was used as the precursor. The pure olivine phase can be prepared with the spray drying and subsequent heat-treatment. The average particle size is around 10μm, and the value of porosity is 63.04%. The results indicate that the initial discharge capacity decreases with increasing charge/ discharge rate and reduces from 138.8 mAh · g^-1 at C/20 rate to 98.3 mAh ·g^-1 at 2C rate, while the polarization between the charge and discharge plateaux is enlarged from 53 mv to 347 mv. However, the average discharge efficiency is up to 99.5% at 2C rate compared to 80.6% at C/20 rate from the second cycle.展开更多
Herein,N-Ti3C2@CNT microspheres are successfully synthesized by the simple spray drying method.In the preparation process,HCl-treated melamine(HTM)is selected as the sources of carbon and nitrogen.It not only realizes...Herein,N-Ti3C2@CNT microspheres are successfully synthesized by the simple spray drying method.In the preparation process,HCl-treated melamine(HTM)is selected as the sources of carbon and nitrogen.It not only realizes in situ growth of CNTs on the surface of MXene nanosheets with the catalysis of Ni,but also introduces efficient N-doping in both MXene and CNTs.Within the microsphere,MXene nanosheets interconnect with CNTs to form porous and conductive network.In addition,N-doped MXene and CNTs can provide strong chemical immobilization for polysulfides and effectively entrap them within the porous microspheres.Above-mentioned merits enable N-Ti3C2@CNT microspheres to be ideal sulfur host.When used in lithium–sulfur(Li–S)battery,the N-Ti3C2@CNT microspheres/S cathode delivers initial specific capacity of 927 mAh g−1 at 1 C and retains high capacity of 775 mAh g−1 after 1000 cycles with extremely low fading rate(FR)of 0.016%per cycle.Furthermore,the cathode still shows high cycling stability at high C-rate of 4 C(capacity of 647 mAh g−1 after 650 cycles,FR 0.027%)and high sulfur loading of 3 and 6 mg cm−2 for Li–S batteries.展开更多
文摘The porous spherical LiFePO4/C powders were prepared by spray drying and carbothermal method (SDCTM). Cheaper trivalent iron ion was used as the precursor. The pure olivine phase can be prepared with the spray drying and subsequent heat-treatment. The average particle size is around 10μm, and the value of porosity is 63.04%. The results indicate that the initial discharge capacity decreases with increasing charge/ discharge rate and reduces from 138.8 mAh · g^-1 at C/20 rate to 98.3 mAh ·g^-1 at 2C rate, while the polarization between the charge and discharge plateaux is enlarged from 53 mv to 347 mv. However, the average discharge efficiency is up to 99.5% at 2C rate compared to 80.6% at C/20 rate from the second cycle.
文摘Herein,N-Ti3C2@CNT microspheres are successfully synthesized by the simple spray drying method.In the preparation process,HCl-treated melamine(HTM)is selected as the sources of carbon and nitrogen.It not only realizes in situ growth of CNTs on the surface of MXene nanosheets with the catalysis of Ni,but also introduces efficient N-doping in both MXene and CNTs.Within the microsphere,MXene nanosheets interconnect with CNTs to form porous and conductive network.In addition,N-doped MXene and CNTs can provide strong chemical immobilization for polysulfides and effectively entrap them within the porous microspheres.Above-mentioned merits enable N-Ti3C2@CNT microspheres to be ideal sulfur host.When used in lithium–sulfur(Li–S)battery,the N-Ti3C2@CNT microspheres/S cathode delivers initial specific capacity of 927 mAh g−1 at 1 C and retains high capacity of 775 mAh g−1 after 1000 cycles with extremely low fading rate(FR)of 0.016%per cycle.Furthermore,the cathode still shows high cycling stability at high C-rate of 4 C(capacity of 647 mAh g−1 after 650 cycles,FR 0.027%)and high sulfur loading of 3 and 6 mg cm−2 for Li–S batteries.