With processing and interpretation of 25 000 km full-coverage multibeam swath data fromthe eastern South China Sea, it is found that NE-trending and NW-trending linear morphological features such as scarps, horsts and...With processing and interpretation of 25 000 km full-coverage multibeam swath data fromthe eastern South China Sea, it is found that NE-trending and NW-trending linear morphological features such as scarps, horsts and grabens, govern the central part (14°-17° N) of eastern subbasin. Compared with reflection seismic profiles, these NE-trending linear morpho-structures are considered to be the representation of basement structures on seabed and can be divided into three linear structural zones. The trend of the central zone is NE45°-50° occurring around extinct spreading center, the trend of the second zone is NE70° - 78° on both sides of the central one and the trend of the third zone is about NE60° just on the north of the second one. These three NE-trending linear zones are formed in late-stage NW - SE-trending seafloor spreading of the eastern subbasin along NW-trending linear faults, and respectively correspond to three spreading episodes: 17.0- 19.0 Ma (5d-5e), 19.0 - 21.0 Ma (5e-6a) and 21.0 - 24.2 Ma (6a-6c) based on the contrast of morpho-structures to magnetic lineation anomalies.展开更多
Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation f...Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation formula was derived for compensation the width deviation caused by PVPC function, and the formula is unified under the thinning and thickening conditions. In order to improve the width calculation accuracy, width spread calculation process was modified with dividing one large reduction pass to several small reduction calculation steps. The thickness wedge was simplified to rectangle based on the volume constant principle, and the width spread model for PVPC was constructed. The width compensation and correction for the PVPC functions are used for the online control process, and the Product dimension accuracy is improved. With the decrease of Crop losses, the Droduct yield was increased with 0. 2%.展开更多
A model was built to simulate liquid aluminum leakage during the casting process,including transient trough flow,orifice outflow,and spread,to prevent the explosion.A comparison between the simulation data and the the...A model was built to simulate liquid aluminum leakage during the casting process,including transient trough flow,orifice outflow,and spread,to prevent the explosion.A comparison between the simulation data and the theoretical calculation results verifies that the model has remarkable adaptability and high accuracy.Although the height of liquid aluminum in the mixing furnace and outlet radius are changed,the molten aluminum will not leak during the casting process.The aluminum in the trough moves forward in a wave-like motion and causes a leakage.The spread of the leaked aluminum resembles a long strip on the ground.The leakage amount and spread area of liquid aluminum increase with increasing the height of liquid aluminum in the mixing furnace.展开更多
基金This study was supported by the National Major Fundamental Research Development Project of China under contract No. G2000046704.
文摘With processing and interpretation of 25 000 km full-coverage multibeam swath data fromthe eastern South China Sea, it is found that NE-trending and NW-trending linear morphological features such as scarps, horsts and grabens, govern the central part (14°-17° N) of eastern subbasin. Compared with reflection seismic profiles, these NE-trending linear morpho-structures are considered to be the representation of basement structures on seabed and can be divided into three linear structural zones. The trend of the central zone is NE45°-50° occurring around extinct spreading center, the trend of the second zone is NE70° - 78° on both sides of the central one and the trend of the third zone is about NE60° just on the north of the second one. These three NE-trending linear zones are formed in late-stage NW - SE-trending seafloor spreading of the eastern subbasin along NW-trending linear faults, and respectively correspond to three spreading episodes: 17.0- 19.0 Ma (5d-5e), 19.0 - 21.0 Ma (5e-6a) and 21.0 - 24.2 Ma (6a-6c) based on the contrast of morpho-structures to magnetic lineation anomalies.
基金Sponsored by the Fundamental Research Funds for the Central Universities(Grant No.N120407007)
文摘Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation formula was derived for compensation the width deviation caused by PVPC function, and the formula is unified under the thinning and thickening conditions. In order to improve the width calculation accuracy, width spread calculation process was modified with dividing one large reduction pass to several small reduction calculation steps. The thickness wedge was simplified to rectangle based on the volume constant principle, and the width spread model for PVPC was constructed. The width compensation and correction for the PVPC functions are used for the online control process, and the Product dimension accuracy is improved. With the decrease of Crop losses, the Droduct yield was increased with 0. 2%.
基金The research work was supported by the State"973"Program (Grant No.TG2000016210),the Chinese Academy of Sciences (Grant No.kscx2-sw-103) and National Natural Science Foundation of China (Grant No.30170158).
基金The authors are grateful for the financial supports from the National Key R&D Program of China(2017YFC0805100).
文摘A model was built to simulate liquid aluminum leakage during the casting process,including transient trough flow,orifice outflow,and spread,to prevent the explosion.A comparison between the simulation data and the theoretical calculation results verifies that the model has remarkable adaptability and high accuracy.Although the height of liquid aluminum in the mixing furnace and outlet radius are changed,the molten aluminum will not leak during the casting process.The aluminum in the trough moves forward in a wave-like motion and causes a leakage.The spread of the leaked aluminum resembles a long strip on the ground.The leakage amount and spread area of liquid aluminum increase with increasing the height of liquid aluminum in the mixing furnace.
