M 0.2Ca 0.8TiO 3∶Pr 3+(M=Mg 2+, Sr 2+, Ba 2+, Zn 2+) long persistence red phosphors were prepared by solid state reaction. The influence of the partially replacing Ca 2+ in CaTiO 3 with Mg 2+, Sr 2+, ...M 0.2Ca 0.8TiO 3∶Pr 3+(M=Mg 2+, Sr 2+, Ba 2+, Zn 2+) long persistence red phosphors were prepared by solid state reaction. The influence of the partially replacing Ca 2+ in CaTiO 3 with Mg 2+, Sr 2+, Ba 2+, Zn 2+ on the excitation spectra, the emission spectra and the long persistence properties were studied. The results suggest that certain quantity of Mg 2+, Sr 2+, Ba 2+, Zn 2+ which partially replace Ca 2+ can enhance the luminescent intensity and prolong the afterglow persistence of the samples. The intensity of Mg 0.2Ca 0.8TiO 3∶Pr 3+ is above all of the samples. Take Mg 0.2Ca 0.8TiO 3∶Pr 3+ as the basic sample, the influence of Pr 3+ concentrations (C(Pr 3+)) on the long afterglow properties were also studied. The results suggest that when the C(Pr 3+) is 0.10% (mol fraction) the intensity of the sample is the highest. The excitation spectra of all these samples show broad band spectra ranging from 300～500 nm peaking at about 342 nm. The emission spectra also exhibit a broad band peaking at 613 nm (CaTiO 3∶Pr 3+ is 612 nm). XRD research indicates that the crystalline phases change due to the replacement of divalent metal ions.The research on the thermoluminescence spectra of Mg 0.2Ca 0.8TiO 3∶Pr 3+ indicates that the peak is at 107.35 ℃ and the depth of the trap energy is about 0 852 eV.展开更多
通过静电纺丝制备了定向排列的0.5(Ba_(0.7)Ca_(0.3))TiO_3-0.5Ba(Zr_(0.2)Ti_(0.8))O_3(BCZT)纳米线,并利用纳米线制备了纳米发电机。研究了定向排列纳米线对纳米发电机输出性能的影响。X射线粉末衍射谱和拉曼光谱显示:制备的纳米线具...通过静电纺丝制备了定向排列的0.5(Ba_(0.7)Ca_(0.3))TiO_3-0.5Ba(Zr_(0.2)Ti_(0.8))O_3(BCZT)纳米线,并利用纳米线制备了纳米发电机。研究了定向排列纳米线对纳米发电机输出性能的影响。X射线粉末衍射谱和拉曼光谱显示:制备的纳米线具有良好的四方相钙钛矿结构。扫描电子显微镜照片显示,利用平行电极收集器可以实现大部分纳米线的定向排列。测试了纳米发电机的压电性能,结果显示:基于定向排列纳米线的纳米发电机平均输出电流为89.69 n A,而基于无序排列纳米线的纳米发电机平均输出电流为52.36 n A。相比而言,发电机的电流输出性能提升了71.3%。利用发电机制备的自供电式可穿戴肢体动作传感器响应非常好,能在不需要外部电源的情况下很好地区分不同肢体部位的弯曲动作。展开更多
Nanophosphor with the nominal composition of Ca0.8 Zn0.2 TiO3 ： Pr3 ＋ , Na^＋ （CZTOPN） was synthesized at relatively low temperature by the sol-gel method. Metal ions were dispersed by citric acid in ethylene glyc...Nanophosphor with the nominal composition of Ca0.8 Zn0.2 TiO3 ： Pr3 ＋ , Na^＋ （CZTOPN） was synthesized at relatively low temperature by the sol-gel method. Metal ions were dispersed by citric acid in ethylene glycol solvent and then react with Ti（OC4H9）4 to form sol and gel. The decomposition process of the precursor, and crystallization and particle size of CZTOPN were examined by thermal analysis （TG-DSC）, powder X-ray diffraction （XRD）, and scan election microscopy （SEM）. Results of TG-DSC and XRD reveal that the composition of Ca0.8 Zn0.2 TiO3 ： Pr3 ＋ , Na^＋ changes with the sintering temperature. SEM data indicate that the diameter of particles is under 50 nm even if the sintering temperature increases to 1000 ℃. In contrast to a solid state reaction, the excitation spectra of samples synthesized by the sol-gel method shift blue about 10 nm and the emission intensity at 617 nm increases significantly.展开更多
文摘M 0.2Ca 0.8TiO 3∶Pr 3+(M=Mg 2+, Sr 2+, Ba 2+, Zn 2+) long persistence red phosphors were prepared by solid state reaction. The influence of the partially replacing Ca 2+ in CaTiO 3 with Mg 2+, Sr 2+, Ba 2+, Zn 2+ on the excitation spectra, the emission spectra and the long persistence properties were studied. The results suggest that certain quantity of Mg 2+, Sr 2+, Ba 2+, Zn 2+ which partially replace Ca 2+ can enhance the luminescent intensity and prolong the afterglow persistence of the samples. The intensity of Mg 0.2Ca 0.8TiO 3∶Pr 3+ is above all of the samples. Take Mg 0.2Ca 0.8TiO 3∶Pr 3+ as the basic sample, the influence of Pr 3+ concentrations (C(Pr 3+)) on the long afterglow properties were also studied. The results suggest that when the C(Pr 3+) is 0.10% (mol fraction) the intensity of the sample is the highest. The excitation spectra of all these samples show broad band spectra ranging from 300～500 nm peaking at about 342 nm. The emission spectra also exhibit a broad band peaking at 613 nm (CaTiO 3∶Pr 3+ is 612 nm). XRD research indicates that the crystalline phases change due to the replacement of divalent metal ions.The research on the thermoluminescence spectra of Mg 0.2Ca 0.8TiO 3∶Pr 3+ indicates that the peak is at 107.35 ℃ and the depth of the trap energy is about 0 852 eV.
文摘通过静电纺丝制备了定向排列的0.5(Ba_(0.7)Ca_(0.3))TiO_3-0.5Ba(Zr_(0.2)Ti_(0.8))O_3(BCZT)纳米线,并利用纳米线制备了纳米发电机。研究了定向排列纳米线对纳米发电机输出性能的影响。X射线粉末衍射谱和拉曼光谱显示:制备的纳米线具有良好的四方相钙钛矿结构。扫描电子显微镜照片显示,利用平行电极收集器可以实现大部分纳米线的定向排列。测试了纳米发电机的压电性能,结果显示:基于定向排列纳米线的纳米发电机平均输出电流为89.69 n A,而基于无序排列纳米线的纳米发电机平均输出电流为52.36 n A。相比而言,发电机的电流输出性能提升了71.3%。利用发电机制备的自供电式可穿戴肢体动作传感器响应非常好,能在不需要外部电源的情况下很好地区分不同肢体部位的弯曲动作。
文摘Nanophosphor with the nominal composition of Ca0.8 Zn0.2 TiO3 ： Pr3 ＋ , Na^＋ （CZTOPN） was synthesized at relatively low temperature by the sol-gel method. Metal ions were dispersed by citric acid in ethylene glycol solvent and then react with Ti（OC4H9）4 to form sol and gel. The decomposition process of the precursor, and crystallization and particle size of CZTOPN were examined by thermal analysis （TG-DSC）, powder X-ray diffraction （XRD）, and scan election microscopy （SEM）. Results of TG-DSC and XRD reveal that the composition of Ca0.8 Zn0.2 TiO3 ： Pr3 ＋ , Na^＋ changes with the sintering temperature. SEM data indicate that the diameter of particles is under 50 nm even if the sintering temperature increases to 1000 ℃. In contrast to a solid state reaction, the excitation spectra of samples synthesized by the sol-gel method shift blue about 10 nm and the emission intensity at 617 nm increases significantly.
