The stability analysis of expansive slope in Jing-Yi Expressway

This paper firstly introduces the distribution of weathered layers, and then presents the relationship between watercontent and expansive force and the working model of expansive forces in expansive soil slopes. Taking the expansive soil slope ofJing-Yi Expressway as example and applying the Slices Method, this paper puts forward the stability calculation method con-sidering the effect of expansive forces, and also proposes the treatments.

Deformation and failure mechanism of slope in three dimensions

Understanding three-dimensional (3D) slope deformation and failure mechanism and corresponding stability analyses are crucially important issues in geotechnical engineering. In this paper, the mecha-nisms of progressive failure with thrust-type and pull-type landslides are described in detail. It is considered that the post-failure stress state and the pre-peak stress state may occur at different regions of a landslide body with deformation development, and a critical stress state element (or the soil slice block) exists between the post-failure stress state and the pre-peak stress state regions. In this regard, two sorts of failure modes are suggested for the thrust-type and three sorts for pull-type landslides, based on the characteristics of shear stress and strain (or tensile stress and strain). Accordingly, a new joint constitutive model (JCM) is proposed based on the current stability analytical theories, and it can be used to describe the mechanical behaviors of geo-materials with softening properties. Five methods, i.e. CSRM (comprehensive sliding resistance method), MTM (main thrust method), CDM (comprehensive displacement method), SDM (surplus displacement method), and MPM (main pull method), for slope stability calculation are proposed. The S-shaped curve of monitored displacement vs. time is presented for different points on the sliding surface during progressive failure process of landslide, and the rela-tionship between the displacement of different points on the sliding surface and height of landslide body is regarded as the parabolic curve. The comparisons between the predicted and observed loadedis-placement and displacementetime relations of the points on the sliding surface are conducted. The classification of stable/unstable displacementetime curves is proposed. The definition of the main sliding direction of a landslide is also suggested in such a way that the failure body of landslide (simplified as“collapse body”) is only involved in the main sliding direction, and the strike and the dip are the same as the collapse body. The rake angle is taken as the direction of the sum of sliding forces or the sum of displacements in collapse body, in which the main slip direction is dependent on progressive defor-mation. The reason of non-convergence with finite element method (FEM) in calculating the stability of slope is also numerically analyzed, in which a new method considering the slip surface associated with the boundary condition is proposed. It is known that the boundary condition of sliding surface can be described by perfect elasto-plastic model (PEPM) and JCM, and that the stress and strain of a landslide can be described properly with the JCM.

Comparison of Different Virtual Inertia Control Methods for Inverter-based Generators

With the rapid development of inverter-based generators(IGs),power grid is faced with critical frequency stability challenges because the existing IGs have no inertia.To equip IGs with inertial response,researchers have proposed several virtual inertia control methods,which can be classified into two categories:virtual synchronous generator(VSG)control and droop control based on rate of change of frequency(ROCOFdroop control).In this paper,the comparison between both virtual inertia control methods is conducted from three perspectives:mathematical model,output characteristic and small-signal stability.State-space models are firstly built to analyze the control mechanism of VSG control and ROCOF-droop control methods.Simulation and eigenvalue analysis are conducted to study the transient responses and oscillation characteristics of both methods,which is helpful to understand the advantages and limitations of existing virtual inertia control methods.Finally,the obtained theoretical results are validated through realtime laboratory(RT-LAB)hardware-in-loop simulation platform.

A mathematical model for the dynamics and control of malaria in Nigeria

Malaria is a life-threatening disease endemic in many African countries especially Nigeria.A mathematical model is used to study the dynamics of malaria in Nigeria.The model incorporates drug resistance,treatment,and the use of mosquito nets as preventive strategies.By fitting the model to data on the incidence of malaria in Nigeria,important parameters associated with the disease dynamics are estimated.Using these estimated parameters,the basic reproduction number is calculated,future dynamics simulated,and those parameters with a large impact on Nigerian malaria determined.Overall,the results indicate that the disease is likely to remain endemic in Nigeria unless better control measures are focused on the dominant resistant strain,treatment is improved and the use of mosquito nets become widespread.

Maximizing Networking Capacity in Multi-Channel Multi-Radio Wireless Networks

Providing each node with one or more multi-channel radios offers a promising avenue for enhancing the network capacity by simultaneously exploiting multiple non-overlapping channels through different radio interfaces and mitigating interferences through proper channel assignment. However, it is quite challenging to effectively utilize multiple channels and/or multiple radios to maximize throughput capacity. The National Natural Science Foundation of China（NSFC） Project61128005 conducted comprehensive algorithmic-theoretic and queuing-theoretic studies of maximizing wireless networking capacity in multi-channel multi-radio（MC-MR） wireless networks under the protocol interference model and fundamentally advanced the state of the art. In addition, under the notoriously hard physical interference model, this project has taken initial algorithmic studies on maximizing the network capacity, with or without power control. We expect the new techniques and tools developed in this project will have wide applications in capacity planning, resource allocation and sharing, and protocol design for wireless networks, and will serve as the basis for future algorithm developments in wireless networks with advanced features, such as multi-input multi-output（MIMO） wireless networks.