Stability monitoring and evaluation of the modeled test square for prehistoric earthen sites during excavation period

In order to explore the stability of test square during archaeological excavation for prehistoric earthen sites in Hangzhou, a modeled test square with 2. 3 min depth, inplane dimensions of 5 min width by 5 m in length, and an archaeological column in the middle was excavated by means of a top-down excavation technique. To investigate the stability performance of the modeled test square and the associated effect on the adjacent area, a real-time comprehensive instrumentation program was conducted during the excavation. Field observations included ground settlements, lateral displacement, pore pressure and underground water level. Monitoring data indicates that the ground settlement induced by dewatering and unloading action basically decreases with the increase of the distance away from the pit edge, and the lateral displacements at four sides showa nonlinear variation along the depth. The maximum value is far below the acceptable value regulated by the related standard,which validates the stability of the modeled test square during excavation. Variations of pore pressure and water level suggest that long-term stability should be paid more attention due to the slowconsolidation of soft soil. Meanwhile, it is proved that the step shape of the wall can resist lateral displacement more effectively than the vertical shape of wall. This case study provides insights into the real archaeological excavation in Hangzhou, in particular Liangzhu prehistoric earthen sites.

Applying real time seismic monitoring technology for slope stability assessment—An Indian opencast coal mine perspective

This paper outlines the results obtained from real time microseismic monitoring of an opencast coal mine in South India.The objective of the study is to investigate the stress changes within the rockmass along the slope due to underground mine development operation and their impact on the stability of the highwall slope.The installed microseismic systems recorded the seismic triggerings down toà2 moment magnitude.In general,most of the events recorded during the monitoring period are weak in seismic energy.The study adopts a simple and more reliable tool to characterize the seismically active zone for assessing the stability of the highwall in real time.The impact of underground working on the slope is studied on the basis of the seismic event impact contours and seismic clusters.During the monitoring period,it is observed that the intensity of the overall microseismic activity along the slope due to the mine development operations did not cause any adverse impact on the highwall stability.

Research on inspection of stability of subsiding area in composite rock-mass roadway

The research concentrates mainly on the development of failure process in composite rock-mass through acoustic emission, convergence inspection, stress measurement, subside area measurement, level measurement in the process of stability and safety monitoring as well as inspecting of subside area in composite hard rock. In terms of the modern signal analysis technology, various aspects are discussed. The monitoring result and the stability of rock mass can be synthetically evaluated and inferred, and the location of acoustic origin according to the acoustic emission regularity can be successfully detected. Finally the key factors of the deformation can be inferred from in subside area.

An analytical model to predict the volume of sand during drilling and production

Over the past few decades, many optical fiber sensing techniques have been developed. Among these available sensing methods, optical fiber Bragg grating（FBG） is probably the most popular one. With its unique capabilities, FBG-based geotechnical sensors can be used as a sensor array for distributive（profile） measurements, deployed under water（submersible）, for localized high resolution and/or differential measurements. The authors have developed a series of FBG-based transducers that include inclination, linear displacement and gauge/differential pore pressure sensors. Techniques that involve the field deployment of FBG inclination, extension and pore-pressure sensor arrays for automated slope stability and ground subsidence monitoring have been developed. The paper provides a background of FBG and the design concepts behind the FBG-based field monitoring sensors. Cases of field monitoring using the FBG sensor arrays are presented, and their practical implications are discussed.