Luminescent properties dependence of water-soluble CdTe quantum dots on stabilizing agents and reaction time

The influence of stabilizing agents and reaction time on the luminescent properties of water-soluble CdTe quantum dots(QDs) was discussed.The thioglycolic acid(TGA)-CdTe ODs were characterized by TEM,XRD and FTIR.It is found that larger-size QDs can be synthesized more easily when L-cysteine(Cys) or golutathione(GSH) is chosen as stabilizing agent and TGA is proper to prepare highly luminescent QDs because of the effect between Cd2+ and sulfhydryl group.Furthermore,the absorption wavelength,full width at half maximum(FWHM),stokes shift,photoluminescence(PL) quantum yield and PL stability of TGA-CdTe are strongly dependent on reaction time,in which the absorption wavelength changes against reaction time with an exponential function.The TGA-CdTe QDs prepared at 2 h possess more excellent luminescent properties.

Characteristics of aggregate gradation, drain down and stabilizing agents in stone matrix asphalt mixtures: A state of art review

Over the years stone matrix asphalt(SMA)mixtures have evolved significantly and research works have presented some promising results.This made the paving industries to increase the usage of SMA mixtures in the pavement construction.However,SMA mixtures have certain challenges or setbacks,which require comprehensive understanding.The aim of the review paper is to present some of the challenges in SMA mixtures and their mitigations measures.It is observed that several challenges(i.e.,aggregate gradation,stone-onstone contact,drain down and stabilizing agents)related to SMA mixtures are addressed by the researchers.Many agencies have suggested their own aggregate gradation based on their experience,location,climatic conditions and available manufacturing facilities,and they are working exceptionally.Stone-on-stone contact is achieved with proper aggregate gradation and failure to meet the same will reduce the performance.Drain down is major concern in the SMA mixtures since it controls overall mixture performance.Therefore,researchers shown out the most importance to curtail the same.Several researchers followed ASTM D6390 and National Cooperative Highway Research Program(NCHRP No.424)procedure to evaluate the drain down and concluded that drain down should be less than0.3%(by weight of mixture).Apart from that,researchers are trying different stabilizing agents to reduce the drain down.Especially,stabilizing agents such as fibers and polymers have a positive impact.Recently,suitable waste and recycle products are used as stabilizing agent to reduce drain down and environmental pollution.Out of which coconut fiber has shown some promising results,however,comprehensive research is required in this regard.On the other hand,0.3%of cellulose fiber is working as a good stabilizing agent and can be used without conducting drain down test.The review paper provides a complete knowledge about different stabilizing agents used in SMA mixtures to minimize the drain down.

A review of electrolyte additives and impurities in vanadium redox flow batteries

As one of the most important components of the vanadium redox flow battery （VRFB）, the electrolyte can impose a significant impact on cell properties, performance and capital cost. In particular, the electrolyte composition will influence energy density, operating temperature range and the practical applications of the VRFB. Various approaches to increase the energy density and operating temperature range have been proposed. The presence of electrolyte impurities, or the addition of a small amount of other chemical species into the vanadium solution can alter the stability of the electrolyte and influence cell perfor- mance, operating temperature range, energy density, electrochemical kinetics and cost effectiveness. This review provides a detailed overview of research on electrolyte additives including stabilizing agents, im- mobilizing agents, kinetic enhancers, as well as electrolyte impurities and chemical reductants that can be used for different purposes in the VRFBs.

Assessment of strength development in cement-admixed artificial organic soil with GX07

To explore the stabilization effect of stabilizing agent GX07 on treating organic soil and the influence of organic matter on the strength development of stabilized soil,artificial organic soil with various organic matter content was obtained by adding different amounts of fulvic acid into non-organic clay,and then liquid-plastic limit tests were carried out on the artificial organic soil.Meanwhile,unconfined compressive strength(UCS) tests were performed on cement-only soil and composite stabilized soil,respectively.The test results indicate that the plastic limit of soil samples increases linearly,and the liquid limit increases exponentially as the organic matter content increases.The strength of stabilized soil is well correlated with the organic matter content,cement content,stabilizing agent content and curing time.When the organic matter content is 6%,as the cement content varies in the range of 10%-20%,the strength of cement-only soil increases from 88.5 to 280.8 kPa.Once 12.6% GX07 is added into the mix,the strength of stabilized soil is 4.93 times compared with that of cement-only soil.GX07 can obviously improve the strength of cemented-soil and has a good economic applicability.A strength model is proposed to predict strength development.

Study on Treatment of Heavy Metals in Fly Ash by a Chelating Agent

The fly ash from two municipal solid waste incineration plants in Shanghai was treated by the self-developed organic composite chelating agent. The results indicated that the stabilization effect of Pb in the fly ash by the composite chelating agent was the best,and the proportions of its easily leaching form in the two kinds of fly ash decreased from 29. 60% and 27. 49% to 3. 05% and 0. 29% respectively. The leaching toxicity of stabilized fly ash was lower than the limits of Standard for Pollution Control on the Landfill Site of Municipal Solid Waste（ GB 16889- 2008）,so it can be landfilled separately in the landfill site of municipal solid waste.

Treatment method of hazardous pickling sludge by reusing as glass–ceramics nucleation agent

Heavy metal containing pickling sludge（PS） is one of the by-products of the stainless-steel-making industry,which has been considered hazardous due to contained chromium and nickel.Traditional methods of PS disposing are landfill and cement solidification.This research is aimed at disposing PS by solidification/stabilization and reusing it as a nucleation agent of glass–ceramics.The crystallization behavior and the properties of a glass in the CaO–MgO–SiO2–Al2O3 system were studied by considering PS as the nucleation agent.Experimental results confirm that introducing 14 wt% PS as the nucleation agent of glass–ceramics can decrease crystallization temperature by 110.8 °C,refine the grain size by forming isometric crystals with size of 2 lm,enhance Vickers hardness by 2690 MPa and decrease water absorption from（1.21 ± 0.10） wt% to（0.04 ± 0.01） wt%.Therefore,it is reasonable to conclude that PS can be utilized as a nucleation agent to improve the crystallization and mechanical properties of the glass–ceramics.The testing results of US EPA toxicity characteristic leaching procedure（TCLP）confirm the safety of this reusing method.

Multiple-SO3H functioned ionic liquid as efficient curing agent for phthalonitrile-terminated poly(phthalazinone ether nitrile)

Combined with the advantages of low melting point,high thermal stability and strong acidity,a multipleSO_3H functioned ionic liquid（MIL） was developed successfully as a curing agent to promote the curing reaction of phthalonitrile-terminated poly（phthalazinone ether nitrile）（PPEN-Ph）.The curing kinetics over differential scanning calorimetry（DSC） showed that both the initial curing temperature Tp0＇ and apparent activation energy Ea＇（based on Kissinger equation） were reduced significantly over MIL（207.9℃ and 101.5 kJ/mol） compared to the common curing agent ZnCl_2（268.5℃ and 201.5 kJ/mol）.Moreover,under identical curing conditions,the resulting thermosetting resin over former（Td5%=526.1℃） showed better thermal stability than that over latter（Td5%=512.1 ℃）.These results indicated that MIL should be a good candidate as a curing agent for phthalonitrile resins.