In this study, a stand-off and collinear double pulse laser-induced breakdown spectroscopy （DP LIBS） system was designed, and the magnesium alloy samples at a distance of 2.5 m away from the LIBS system were measure...In this study, a stand-off and collinear double pulse laser-induced breakdown spectroscopy （DP LIBS） system was designed, and the magnesium alloy samples at a distance of 2.5 m away from the LIBS system were measured. The effect of inter-pulse delay on spectra was studied, and the signal enhancement was observed compared to the single pulse LIBS （SP LIBS）. The morphology of the ablated crater on the sample indicated a higher efficiency of surface pretreatment in DP LIBS. The calibration curves of Ytterbium （Y） and Zirconium （Zr） were investigated. The square of the correlation coefficient of the calibration curve of element Y reached up to 0.9998.展开更多
We derived a theoretical solution of the shock stand-off distance for a non-equilibrium flow over spheres based on Wen and Hornung＇s solution and Olivier＇s solution. Compared with previous approaches, the main advan...We derived a theoretical solution of the shock stand-off distance for a non-equilibrium flow over spheres based on Wen and Hornung＇s solution and Olivier＇s solution. Compared with previous approaches, the main advantage of the present approach is allowing an analytic solution without involving any semi-empirical parameter for the whole non-equilibrium flow regimes. The effects of some important physical quantities therefore can be fully revealed via the analytic solution. By combining the current solution with Ideal Dissociating Gas（IDG） model, we investigate the effects of free stream kinetic energy and free stream dissociation level（which can be very different between different facilities） on the shock stand-off distance.展开更多
Fluid jet polishing(FJP)is a versatile polishing process that has many advantages compared to other polishing processes.Stand-off distance(SOD)is one of the key parameters in flu id jet polishi ng.However,relatively l...Fluid jet polishing(FJP)is a versatile polishing process that has many advantages compared to other polishing processes.Stand-off distance(SOD)is one of the key parameters in flu id jet polishi ng.However,relatively little research work has been carried out to investigate its effect of SOD on material removal characteristics and surface generation in FJP.In this paper,a systematic investigation of the effect of SOD on the tool influence function and surface topography in FJP was conducted.Experiments were designed for FJP two kinds of materials corresponding to ductile and brittle materials.They are nickel copper(NiCu)alloy and BK7 optical glass,respectively.In this study,the SOD was varied from 2 to 35 mm.Analysis and discussions were made on its effect on the shape of TIF,material removal rate,and surface topography.It is interesting to note that the TIF shape becomes a Gaussian-like shape with large SOD both on NiCu and BK7,which provides a novel way to optimize the TIF in FJP.The variation of the material removal rate and surface roughness versus SOD on NiCu and BK7 were also determined from the experimental results.Moreover,the surface topography of NiCu and BK7 were characterized from the results measured from the white light interferometer and scan electron microscope.The outcome of the study provides a better understanding of the material removal characteristics and surface generation mechanism in FJP.展开更多
基金supported by National Natural Science Foundation of China(No.61473279)the National High-Tech Research and Development Program of China(863 Program)(No.2012AA040608)Equipment Development Programs of the Chinese Academy of Sciences(No.YZ201247)
文摘In this study, a stand-off and collinear double pulse laser-induced breakdown spectroscopy （DP LIBS） system was designed, and the magnesium alloy samples at a distance of 2.5 m away from the LIBS system were measured. The effect of inter-pulse delay on spectra was studied, and the signal enhancement was observed compared to the single pulse LIBS （SP LIBS）. The morphology of the ablated crater on the sample indicated a higher efficiency of surface pretreatment in DP LIBS. The calibration curves of Ytterbium （Y） and Zirconium （Zr） were investigated. The square of the correlation coefficient of the calibration curve of element Y reached up to 0.9998.
基金co-supported by the Research Grants Council of Hong Kong,China(No.C5010-14E)the National Natural Science Foundation of China(No.11372265)
文摘We derived a theoretical solution of the shock stand-off distance for a non-equilibrium flow over spheres based on Wen and Hornung＇s solution and Olivier＇s solution. Compared with previous approaches, the main advantage of the present approach is allowing an analytic solution without involving any semi-empirical parameter for the whole non-equilibrium flow regimes. The effects of some important physical quantities therefore can be fully revealed via the analytic solution. By combining the current solution with Ideal Dissociating Gas（IDG） model, we investigate the effects of free stream kinetic energy and free stream dissociation level（which can be very different between different facilities） on the shock stand-off distance.
基金The work described in this paper was mainly supported by General Research Fund from the Research Grants Council(Project No.:15200119)Innovation and Technology Commission(ITC)(Project No.:ITS/076/18FP)of Hong Kong Special Administrative Region(HKSAR),Chinathe financial support from the Guangdong Natural Science Foundation Programme 2019-2020(Project No.:2O19A1515O12O15).
文摘Fluid jet polishing(FJP)is a versatile polishing process that has many advantages compared to other polishing processes.Stand-off distance(SOD)is one of the key parameters in flu id jet polishi ng.However,relatively little research work has been carried out to investigate its effect of SOD on material removal characteristics and surface generation in FJP.In this paper,a systematic investigation of the effect of SOD on the tool influence function and surface topography in FJP was conducted.Experiments were designed for FJP two kinds of materials corresponding to ductile and brittle materials.They are nickel copper(NiCu)alloy and BK7 optical glass,respectively.In this study,the SOD was varied from 2 to 35 mm.Analysis and discussions were made on its effect on the shape of TIF,material removal rate,and surface topography.It is interesting to note that the TIF shape becomes a Gaussian-like shape with large SOD both on NiCu and BK7,which provides a novel way to optimize the TIF in FJP.The variation of the material removal rate and surface roughness versus SOD on NiCu and BK7 were also determined from the experimental results.Moreover,the surface topography of NiCu and BK7 were characterized from the results measured from the white light interferometer and scan electron microscope.The outcome of the study provides a better understanding of the material removal characteristics and surface generation mechanism in FJP.
