The wedge-shaped and leaf-type silicon light-emitting devices(LED)are designed and fabricated with the Singapore Chartered Semi Inc.'s dual-gate standard 0.35μm CMOS process.The basic structure of the two devices...The wedge-shaped and leaf-type silicon light-emitting devices(LED)are designed and fabricated with the Singapore Chartered Semi Inc.'s dual-gate standard 0.35μm CMOS process.The basic structure of the two devices is N well-P+ junction.P+ area is the wedge-shaped structure,which is embedded in N well.The leaf-type silicon LED device is a combination of the three wedge-shaped LED devices.The main difference between the two devices is their different electrode distribution,which is mainly in order to analyze the application of electric field confinement(EFC).The devices' micrographs were measured with the Olympus IC test microscope.The forward and reverse bias electrical characteristics of the devices were tested.Light measurements of the devices show that the electrode layout is very important when the electric field confinement is applied.展开更多
Application of silicon(Si) could greatly boost rice yield and mitigate abiotic stress,especially drought.A field experiment was conducted during 2015 at the research farm of Hong Duc University,Thanh Hoa City,Vietnam,...Application of silicon(Si) could greatly boost rice yield and mitigate abiotic stress,especially drought.A field experiment was conducted during 2015 at the research farm of Hong Duc University,Thanh Hoa City,Vietnam,to evaluate the effects of five different combined doses of standard fertilizer practice and Si fertilizer on growth,yield and yield components,as well as nutrient uptake of rice.The treatments consisted of the recommended dose of fertilizer(RDF,110 kg/hm^2 N + 90 kg/hm^2 P_2O_5 + 80 kg/hm^2 K_2O) as the control,RDF + 100 kg/hm^2 SiO_2,RDF + 200 kg/hm^2 SiO_2,RDF + 300 kg/hm^2 SiO_2 and RDF + 400 kg/hm^2 SiO_2.The results showed that the growth,grain and straw yields as well as yield components(number of grains per panicle,seed-setting rate and 1000-grain weight) were significantly affected by Si application.The highest grain yield of 3 705 kg/hm^2 was obtained with the highest level of Si fertilizer in combination with RDF(RDF + 400 kg/hm^2 SiO_2),however,it was statistically at par with the yields obtained with RDF + 300 kg/hm^2 SiO_2(3 664 kg/hm^2) and RDF + 200 kg/hm^2 SiO_2(3 621 kg/hm^2).The optimum dose of Si fertilizer with maximized grain yield(3 716 kg/hm^2) was 329 kg/hm^2 SiO_2.The nutrient(Si,N,P and K) uptakes of rice were also significantly enhanced by Si application.Si application at the level of 329 kg/hm^2 along with RDF would help in the sustainable production of rice in the tropical zone of Vietnam.展开更多
The accurate measurement on the compressibility and thermal expansion coefficients of density standard liquid at 2329kg/m3（DSL-2329） plays an important role in the quality control for silicon single crystal manufact...The accurate measurement on the compressibility and thermal expansion coefficients of density standard liquid at 2329kg/m3（DSL-2329） plays an important role in the quality control for silicon single crystal manufacturing. A new method is developed based on hydrostatic suspension principle in order to determine the two coefficients with high measurement accuracy. Two silicon single crystal samples with known density are immersed into a sealed vessel full of DSL-2329. The density of liquid is adjusted with varying liquid temperature and static pressure, so that the hydrostatic suspension of two silicon single crystal samples is achieved. The compression and thermal expansion coefficients are then calculated by using the data of temperature and static pressure at the suspension state. One silicon single crystal sample can be suspended at different state, as long as the liquid temperature and static pressure function linearly according to a certain mathematical relationship. A hydrostatic suspension experimental system is devised with the maximal temperature control error ±50 μK; Silicon single crystal samples can be suspended by adapting the pressure following the PID method. By using the method based on hydrostatic suspension principle, the two key coefficients can be measured at the same time, and measurement precision can be improved due to avoiding the influence of liquid surface tension. This method was further validated experimentally, where the mixture of 1, 2, 3-tribromopropane and 1,2-dibromoethane is used as DSL-2329. The compressibility and thermal expansion coefficients were measured, as 8.5′10–4 K–1 and 5.4′10–10 Pa–1, respectively.展开更多
基金National Natural Science Foundation Subject(60536030,60676038)Tianjin Key Basic Research Project(06YFJZJC00200)
文摘The wedge-shaped and leaf-type silicon light-emitting devices(LED)are designed and fabricated with the Singapore Chartered Semi Inc.'s dual-gate standard 0.35μm CMOS process.The basic structure of the two devices is N well-P+ junction.P+ area is the wedge-shaped structure,which is embedded in N well.The leaf-type silicon LED device is a combination of the three wedge-shaped LED devices.The main difference between the two devices is their different electrode distribution,which is mainly in order to analyze the application of electric field confinement(EFC).The devices' micrographs were measured with the Olympus IC test microscope.The forward and reverse bias electrical characteristics of the devices were tested.Light measurements of the devices show that the electrode layout is very important when the electric field confinement is applied.
基金the Project of Netherlands Organization for Cooperation in Higher Education(NUFFIC)/The Netherlands Initiative for Capacity development in Higher Education(NICHE)/Vietnam 105(VNM 105)Supporting the integration in Agricultural Curricula of Climate Change concerns at Universities of Agriculture:Hanoi University of Agriculture,Hong Duc University and Hue University of Agriculture and Forestry(ACCCU)-Wageningen University and the Asian Institute of Technology,Thailand,for funding the work
文摘Application of silicon(Si) could greatly boost rice yield and mitigate abiotic stress,especially drought.A field experiment was conducted during 2015 at the research farm of Hong Duc University,Thanh Hoa City,Vietnam,to evaluate the effects of five different combined doses of standard fertilizer practice and Si fertilizer on growth,yield and yield components,as well as nutrient uptake of rice.The treatments consisted of the recommended dose of fertilizer(RDF,110 kg/hm^2 N + 90 kg/hm^2 P_2O_5 + 80 kg/hm^2 K_2O) as the control,RDF + 100 kg/hm^2 SiO_2,RDF + 200 kg/hm^2 SiO_2,RDF + 300 kg/hm^2 SiO_2 and RDF + 400 kg/hm^2 SiO_2.The results showed that the growth,grain and straw yields as well as yield components(number of grains per panicle,seed-setting rate and 1000-grain weight) were significantly affected by Si application.The highest grain yield of 3 705 kg/hm^2 was obtained with the highest level of Si fertilizer in combination with RDF(RDF + 400 kg/hm^2 SiO_2),however,it was statistically at par with the yields obtained with RDF + 300 kg/hm^2 SiO_2(3 664 kg/hm^2) and RDF + 200 kg/hm^2 SiO_2(3 621 kg/hm^2).The optimum dose of Si fertilizer with maximized grain yield(3 716 kg/hm^2) was 329 kg/hm^2 SiO_2.The nutrient(Si,N,P and K) uptakes of rice were also significantly enhanced by Si application.Si application at the level of 329 kg/hm^2 along with RDF would help in the sustainable production of rice in the tropical zone of Vietnam.
基金Supported by National Natural Science Foundation of China(Grant No.51105347)National Key Technology R&D Program of Ministry of Science and Technology of China(Grant No.2011BAI02B03)
文摘The accurate measurement on the compressibility and thermal expansion coefficients of density standard liquid at 2329kg/m3（DSL-2329） plays an important role in the quality control for silicon single crystal manufacturing. A new method is developed based on hydrostatic suspension principle in order to determine the two coefficients with high measurement accuracy. Two silicon single crystal samples with known density are immersed into a sealed vessel full of DSL-2329. The density of liquid is adjusted with varying liquid temperature and static pressure, so that the hydrostatic suspension of two silicon single crystal samples is achieved. The compression and thermal expansion coefficients are then calculated by using the data of temperature and static pressure at the suspension state. One silicon single crystal sample can be suspended at different state, as long as the liquid temperature and static pressure function linearly according to a certain mathematical relationship. A hydrostatic suspension experimental system is devised with the maximal temperature control error ±50 μK; Silicon single crystal samples can be suspended by adapting the pressure following the PID method. By using the method based on hydrostatic suspension principle, the two key coefficients can be measured at the same time, and measurement precision can be improved due to avoiding the influence of liquid surface tension. This method was further validated experimentally, where the mixture of 1, 2, 3-tribromopropane and 1,2-dibromoethane is used as DSL-2329. The compressibility and thermal expansion coefficients were measured, as 8.5′10–4 K–1 and 5.4′10–10 Pa–1, respectively.
