Effects of relaxation time on start-up time for starting flow of Maxwell fluid in a pipe

Although the analytical solution of the starting flow of Maxwell fluid in a pipe has been derived for a long time, the effect of relaxation time λ on start-up time ts of this flow is still not well understood. Especially, there exist a series of jumps on the ts-λ. curve. In this paper we introduce a normalized mechanical energy by mode decomposition and mathematical analogy to describe the start-up process. An improved definition of start-up time is presented based on the normalized mechanical energy. It is proved that the ts-λ. curve contains a series of jumps if λ is larger than a critical value. The exact positions of the jumps are determined and the physical reason of the jumps is discussed.

An Integrated Scheduling Algorithm for the Same Equipment Process Sequencing Based on the Root-Subtree Vertical and Horizontal Pre-Scheduling

Given the existing integrated scheduling algorithms,all processes are ordered and scheduled overall,and these algorithms ignore the influence of the vertical and horizontal characteristics of the product process tree on the product scheduling effect.This paper presents an integrated scheduling algorithm for the same equipment process sequencing based on the Root-Subtree horizontal and vertical pre-scheduling to solve the above problem.Firstly,the tree decomposition method is used to extract the root node to split the process tree into several Root-Subtrees,and the Root-Subtree priority is set from large to small through the optimal completion time of vertical and horizontal pre-scheduling.All Root-Subtree processes on the same equipment are sorted into the stack according to the equipment process pre-start time,and the stack-top processes are combined with the schedulable process set to schedule and dispatch the stack.The start processing time of each process is determined according to the dynamic start processing time strategy of the equipment process,to complete the fusion operation of the Root-Subtree processes under the constraints of the vertical process tree and the horizontal equipment.Then,the root node is retrieved to form a substantial scheduling scheme,which realizes scheduling optimization by mining the vertical and horizontal characteristics of the process tree.Verification by examples shows that,compared with the traditional integrated scheduling algorithms that sort the scheduling processes as an overall,the integrated scheduling algorithmin this paper is better.The proposed algorithmenhances the process scheduling compactness,reduces the length of the idle time of the processing equipment,and optimizes the production scheduling target,which is of universal significance to solve the integrated scheduling problem.

THE INFLUENCE OF THERMAL PERFORMANCE OF TWT CATHODE-HEATER ASSEMBLY BY DIFFERENT CONTACT FORM BETWEEN INNER HEAT SHIELD AND SUPPORT CYLINDER

In this paper,the influence of thermal performance of cathode-heater assembly of Traveling Wave Tube(TWT),which has different contact form between inner heat shield and supporting cylinder,is analyzed using the simulation software ANSYS.With both thermal radiation and heat conduction are considered,the temperature and heat flux distribution of structures with different contact form are calculated,and also starting time which is needed before temperature come into steady status.The result of analysis suggests that changing the contact form between inner heat shield and support cylinder can influence the thermal performance of cathode-heater assembly and improve assembly's temperature distribution and promote heater's heating efficiency.The result of this paper provides theoretical guidance in the design of cathode-heater assembly.

MODELING OF STRAIN-INDUCED PRECIPITATION KINETICS IN Nb MICROALLOYED STEELS

On the basis of the thermodynamic calculation of precipitation and considering the effect of strain on the precipitation behavior and chemical composition （Si and Mn）, the kinetics of precipitation from austenite has been investigated for different temperatures and strains. Nucleation theory and the solubility product of niobium, carbon, and nitrogen in austenite have been used to derive equations for the start time of precipitation as a function of temperature and composition. The value of n in Avrami equation was determined using the available experimental data from the published reports, which indicated that n is a constant independent of temperature and the end time of precipitation is a function of n and the start time of precipitation. The values of the start time and end time of precipitation predicted by the new model are compared with the experimental values and a good agreement was obtained between both.

Reasonable start time of carbon dioxide injection in enhanced coalbed methane recovery involving thermal-hydraulic-mechanical couplings

Injection of gas (CO_(2)) into coal seams is an effective method to benefit from both CO_(2) geological storage and coalbed methane recovery. Based on the dual pore structure of coal mass, and the Weibull distribution of fracture permeability, a menmal-hydraulic-mechanical (THM) coupling mathematical model is proposed involving the non-isothermal adsorption of binary gases, dynamic gas diffusion between matrix and fractures, multiphase seepage, coal deformation, heat conduction and heat convection. This mathematical model is applied to study the process of CO_(2)-enhanced coalbed methane recovery (CO_(2)-ECBM). Results show that the CH4 content of CO_(2)-ECBM in coal seam decreases significantly when compared with that of regular drainage, and decreases rapidly in the early stage but slowly in the later stage. Coal seam permeability evolution is triggered by changes in gas adsorption/desorption, temperature and effective stress. For regular drainage, the early permeability shows a decreasing trend dominated by the increase of effective stress, while the later permeability shows an increasing trend dominated by the CH4 desorption caused shrinkage of coal matrix. For CO_(2)-ECBM, the permeability in coal seam generally shows a downward trend due to both matrix swelling induced by gas adsorption and thermal expansion, particularly near injection well. There appears an increased and delayed peak production rate of CH4. The CH4 production rate of CO_(2)-ECBM is always higher than that of regular drainage. The CH4 cumulative production and CO_(2) cumulative storage linearly increase with time, and the CH4 cumulative production of CO_(2)-ECBM increased by 39.2% in the duration of 5000 d compared with regular drainage. Reasonable CO_(2) injection starting time can overcome the issue of early CO_(2) breakthrough and ineffective increase of CH4 production. In the studied case, the optimal injection starting time is 2500 d. Compared with the simultaneous CH4 extraction and CO_(2) injection, the CH4 cumulative production of optimal time has increased by 30.1%. The research provides a reference for determining the reasonable CO_(2) injection time under similar conditions.

Determination of event start time at BESⅢ

The principle of the method for the BESⅢ event start time determination and the code construction are described. The investigation of influence of the noise, the method of rejecting noise and the performance checking by the Monte Carlo physics data sample are also presented. The preliminary results got from the Monte Carlo simulation are presented, the reconstruction efficiency of J/ψ → anything events at noise level 0 - 60% can achieve above 99%, and the error rate is below 1%.

Study of the efficiency of event start time determination at BESⅢ

A method to estimate the efficiency of event start time determination at BESIII is developed. This method estimates the efficiency at the event level by combining the efficiencies of various tracks （e, μ, π, K, p, y） in a Bayesian way. Efficiencies results and the difference between data and MC at the track level are presented in this paper. For a given physics channel, event start time efficiency and systematic error can be estimated following this method.

Sedimentary and tectonic evolution of the Banquan pull-apart basin and implications for late Cenozoic dextral strike-slip movement of the Tanlu Fault Zone

The Banquan Basin is a pull-apart basin with the largest scale and the most prominent structure due to dextral slip of the Tanlu Fault Zone(TLFZ) in late Cenozoic. The depositional history of the basin records the start time and evolution of the right-lateral strike-slip movement of the TLFZ. This paper studies the sedimentary and tectonic evolution of the Banquan Basin by seismic reflection exploration, borehole detection and cosmogenic nuclide chronology. We analyze the coupling relationship between the pull-apart basin and the strike-slip fault and discuss the start time and tectonic significance of the right-lateral strikeslip of the TLFZ. Our study indicates that the Banquan Basin has undergone three evolutionary stages: weak rifting during the pre-pull-apart period, strong extension during the syn-pull-apart period and subsidence during the post-pull-apart period. This implies that the TLFZ, which controls the evolution of the basin, experienced an evolutionary process of weak activity,intensified activity and migration of activity toward the central basin. The sedimentary filling of the basin has strong response to the episodic pull-apart and extension of the basin. Lying upon the basement of the basin, a thin layer of Miocene mudstone slowly accumulated due to local rifting before the strong pull-apart event. Along with the dextral slipping and pull-apart process, the basin was filled with alluvial fan facies, fluvial facies and floodplain facies strata from bottom to top. The latest tectonic movement of the TLFZ in the North China Block in late Cenozoic was dominated by episodic dextral strike-slip motion, and this deformation pattern started at 4.01±1.27 Ma. The latest tectonic deformation in North China since late Cenozoic was governed by eastward extrusion and tectonic orogenesis of the eastern margin of the Qinghai-Xizang Plateau since late Miocene. The eastward thrusting of the Liupanshan fault zone and sinistral shearing of the Qinling fault zone led to the anticlockwise rotation and pushing of secondary blocks in North China, resulting in a planar bookshelf faulting and rotation pattern. This unique deformation pattern transferred eastwards to the North China Plain at ~4.01 Ma and the process continues to the present time.This planar bookshelf rotation, accompanied with regional sinistral strike-slip movement of the ~EW-trending boundary fault zones to the north and south of the North China Block and dextral strike-slip motion of the NNE-trending boundary faults between secondary blocks, is likely to be the long-range effect of the strong extrusion of the eastern margin of the QinghaiXizang Plateau.

Modeling of Strain-Induced Precipitation Kinetics and Evolution of Austenite Grains in Nb Microalloyed Steels

Considering the effect of strain and chemical composition onprecipitation behavior, new models for the start and end time of Nb（C,N） precipitation in austenite under the conditions of different temperatures and strains have been investigated for Nb microalloyed steel. The value of n in the precipitation kinetic equation has been determined by using the available experimental data in literature, which indicated that n is a constant and independent of temperature. The values of the start and end time of the predicted precipitation are compared with the experimental values. Calculated results are in good agreement with the experimental results. Also, the evolution of austenite grains before ferrite transformation is simulated by taking the effect of precipitation into consideration. The measured austenite grain size is in good agreement with predicted one prior to ferrite transformation.