Remaining Useful Life Model and Assessment of Mechanical Products: A Brief Review and a Note on the State Space Model Method

The remaining useful life(RUL) prediction of mechanical products has been widely studied for online system performance reliability, device remanufacturing, and product safety(safety awareness and safety improvement). These studies incorporated many di erent models, algorithms, and techniques for modeling and assessment. In this paper, methods of RUL assessment are summarized and expounded upon using two major methods: physics model based and data driven based methods. The advantages and disadvantages of each of these methods are deliberated and compared as well. Due to the intricacy of failure mechanism in system, and di culty in physics degradation observation, RUL assessment based on observations of performance variables turns into a science in evaluating the degradation. A modeling method from control systems, the state space model(SSM), as a first order hidden Markov, is presented. In the context of non-linear and non-Gaussian systems, the SSM methodology is capable of performing remaining life assessment by using Bayesian estimation(sequential Monte Carlo). Being e ective for non-linear and non-Gaussian dynamics, the methodology can perform the assessment recursively online for applications in CBM(condition based maintenance), PHM(prognostics and health management), remanufacturing, and system performance reliability. Finally, the discussion raises concerns regarding online sensing data for SSM modeling and assessment of RUL.

Establishing formal state space models via quantization forquantum control systems

Formal state space models of quantum control systems are deduced and a scheme to establish formal state space models via quantization could been obtained for quantum control systems is proposed. State evolution of quantum control systems must accord with Schrdinger equations, so it is foremost to obtain Hamiltonian operators of systems. There are corresponding relations between operators of quantum systems and corresponding physical quantities of classical systems, such as momentum, energy and Hamiltonian, so Schrdinger equation models of corresponding quantum control systems via quantization could been obtained from classical control systems, and then establish formal state space models through the suitable transformation from Schrdinger equations for these quantum control systems. This method provides a new kind of path for modeling in quantum control.

Application of the state space model to the system of wave energy conversion Analytical method for wave forces on singleoscillating rectangular buoy

A new analytical method is proposed to analyze the force acting on a rectangular oscillating buoy due to linear waves.In the method a new analytical expression for the diffraction velocity potential is obtained first by use of theeigenfunction expansion method and then the wave excitation force is calculated by use of the known incident wavepotential and the diffraction potential. Compared with the classical analytical method, it can be seen that the presentmethod is simpler for a two-dimensional problem due to the comparable effort needed for the computation ofdiffraction potential and for that of radiated potential. To verify the correctness of the method, a classical example inthe reference is recomputed and the obtained results are in good accordance with those by use of other methods,which shows that the present method is correct.

Quantum-dot Semiconductor Optical Amplifiers in State Space Model

A state space model(SSM) is derived for quantum-dot semiconductor optical amplifiers(QD-SOAs).Rate equations of QD-SOA are formulated in the form of state update equations,where average occupation probabilities along QD-SOA cavity are considered as state variables of the system.Simulations show that SSM calculates QD-SOA′s static and dynamic characteristics with high accuracy.

Design Criterion for Fixture Layout Based on the State Space Model in M ultistation Assembly Processes

The fixture layout is crucial to assure the product quality in a multistation assembly process （MAP）. A well-designed fixture layout will make the final product＇s variability be insensitive to the fixture variation inputs. As the basis of the fixture layout design, the design criterion plays an important role in the effectiveness of a solution and the optimization efficiency. In this paper, an effective and efficient design criterion is proposed for the fixture layout with a fixed reference point （FRP） in an MAP. First of all, a state space model for the individual port＇s variation propagation and accumulation is developed, which is the mathematical foundation of the proposed criterion. Then, based on this model, a novel design criterion used to evaluate the performance of the fixture layout is proposed for the fixture layout with an FRP. Finally, a method extracted from the proposed design criterion is developed for quick fixture layout design. A four-station assembly process is used to validate the effectiveness and efficiency of the proposed models and methods.

Recursive State-space Model Identification of Non-uniformly Sampled Systems Using Singular Value Decomposition

In this paper a recursive state-space model identification method is proposed for non-uniformly sampled systems in industrial applications. Two cases for measuring all states and only output(s) of such a system are considered for identification. In the case of state measurement, an identification algorithm based on the singular value decomposition(SVD) is developed to estimate the model parameter matrices by using the least-squares fitting. In the case of output measurement only, another identification algorithm is given by combining the SVD approach with a hierarchical identification strategy. An example is used to demonstrate the effectiveness of the proposed identification method.

A Study on the Factors Influencing the Income Gap between Urban and Rural Areas Based on State-space Model

The increasingly widening income gap between urban and rural areas is affected by many factors. Using the stepwise regression analysis,we find that urbanization level,socio-economic development,education level,financial development scale and financial development efficiency have the greatest impact on the income gap between urban and rural areas. By cointegration test,it is found that there is a long-term equilibrium relationship between these five variables and the income gap between urban and rural areas. We build the state-space model to research the dynamic impact of these factors on the income gap between urban and rural areas. The results show that by improving the level of urbanization,we can effectively narrow the income gap between urban and rural areas,while socio-economic development,the improvement of education level,expansion of financial development scale and financial development efficiency all significantly expand the income gap between urban and rural areas.

Deviation Diagnosis and Analysis of Hull Flat Block Assembly Based on a State Space Model

Dimensional control is one of the most important challenges in the shipbuilding industry. In order to predict assembly dimensional variation in hull flat block construction, a variation stream model based on state space was presented in this paper which can be further applied to accuracy control in shipbuilding. Part accumulative error, locating error, and welding deformation were taken into consideration in this model, and variation propagation mechanisms and the accumulative rule in the assembly process were analyzed. Then, a model was developed to describe the variation propagation throughout the assembly process. Finally, an example of fiat block construction from an actual shipyard was given. The result shows that this method is effective and useful.

A Generalized State Space Average Model for Parallel DC-to-DC Converters

The high potentiality of integrating renewable energies,such as photovoltaic,into a modern electrical microgrid system,using DC-to-DC converters,raises some issues associated with controller loop design and system stability.The generalized state space average model(GSSAM)concept was consequently introduced to design a DC-to-DC converter controller in order to evaluate DC-to-DC converter performance and to conduct stability studies.This paper presents a GSSAM for parallel DC-to-DC converters,namely:buck,boost,and buck-boost converters.The rationale of this study is that modern electrical systems,such as DC networks,hybrid microgrids,and electric ships,are formed by parallel DC-to-DC converters with separate DC input sources.Therefore,this paper proposes a GSSAM for any number of parallel DC-to-DC converters.The proposed GSSAM is validated and investigated in a time-domain simulation environment,namely a MATLAB/SIMULINK.The study compares the steady-state,transient,and oscillatory performance of the state-space average model with a fully detailed switching model.

Stiffness Characteristics of a Basic Nonlinear Air Spring Model

This study predicts the characteristics of a compressible polytropic air spring model. A second-order nonlinear autonomous air spring model is presented. The proposed model is based on the assumption that polytropic processes occur. Isothermal and isentropic compression and expansion of the air within the spring chambers are the two scenarios that are taken into consideration. In these situations, the air inside the spring chambers compresses and expands, resulting in nonlinear spring restoring forces. The MATLAB/Simulink software environment is used to build a numerical simulation model for the dynamic behavior of the air spring. To quantify the values of the stiffnesses of the proposed models, a numerical solution is run over time for various values of the design parameters. The isentropic process case has a higher dynamic air spring stiffness than the isothermal process case, according to the results. The size of the air spring chamber and the area of the air spring piston influence the air spring stiffness in both situations. It is demonstrated that the stiffness of the air spring increases linearly with increasing piston area and decreases nonlinearly with increasing air chamber length. As long as the ratio of the vibration’s amplitude to the air spring’s chamber length is small, there is good agreement in both scenarios between the linearized model and the full nonlinear model. This implies that linear modeling is a reasonable approximation of the complete nonlinear model in this particular scenario.

State Space Model Predictive Control of an Aerothermic Process with Actuators Constraints

This paper investigates State Space Model Predictive Control (SSMPC) of an aerothermic process. It is a pilot scale heating and ventilation system equipped with a heater grid and a centrifugal blower, fully connected through a data acquisition system for real time control. The interaction between the process variables is shown to be challenging for single variable controllers, therefore multi-variable control is worth considering. A multi-variable state space model is obtained from on-line experimental data. The controller design is translated into a Quadratic Programming (QP) problem, in which a cost function subject to actuators linear inequality constraints is minimized. The outcome of the experimental results is that the main control objectives, such as set-point tracking and perturbations rejection under actuators constraints, are well achieved for both controlled variables simultaneously.

State Space Modeling and Implementation of a New Transformer Based Multilevel Inverter Topology with Reduced Switch Count

This paper presents a new transformer based multilevel inverter, with a novel pulse width modulation scheme to achieve seven-level inverter output voltage. The proposed inverter switching pattern consists of three fundamental frequency sinusoidal reference signals with an offset value, and one high frequency triangular carrier signal. This switching scheme has been implemented using an 8-bit Xilinx SPARTAN-3E field programmable gate array based controller. In addition, the state space model of the proposed inverter is developed. The significant features of the proposed topology are: reduction of the power switch count and the gate drive power supply unit, the provision of a galvanic isolation between load and sources by a centre tap transformer. An exhaustive comparison has been made of the existing multilevel inverter topologies and the proposed topology. The performances of the proposed topology with resistive, resistive-inductive loads are simulated in a MATLAB environment and validated experimentally on a laboratory prototype.

Model-Following Designs Using Direct State Derivative Measurement Feedback in Novel Reciprocal State Space Form

The paper introduces effective and straightforward algorithms of both explicit and implicit model-following designs with state derivative measurement feedback in novel reciprocal state space form (RSS) to handle state derivative related performance output and state related performance output design cases. Applying proposed algorithms, no integrators are required. Consequently, implementation is simple and low-cost. Simulation has also been carried out to verify the proposed algorithms. Since acceleration can only be modeled as state derivative in state space form and micro-accelerometer which is the state derivative sensor is getting more and more attentions in many microelectromechanical and nanoelectromechanical systems (MEMS/NEMS) applications, the proposed algorithms are suitable for MEMS/NEMS systems installed with micro-accelerometers.

Least Squares Matrix Algorithm for State-Space Modelling of Dynamic Systems

This work presents a novel least squares matrix algorithm (LSM) for the analysis of rapidly changing systems using state-space modelling. The LSM algorithm is based on the Hankel structured data matrix representation. The state transition matrix is updated without the use of any forgetting function. This yields a robust estimation of model parameters in the presence of noise. The computational complexity of the LSM algorithm is comparable to the speed of the conventional recursive least squares (RLS) algorithm. The knowledge of the state transition matrix enables feasible numerical operators such as interpolation, fractional differentiation and integration. The usefulness of the LSM algorithm was proved in the analysis of the neuroelectric signal waveforms.

Assessment of Model Predictive Control Performance Criteria

The current highly competitive environment has driven industries to operate with increasingly restricted profit margins. Thus, it is imperative to optimize production processes. Faced with this scenario, multivariable predictive control of processes has been presented as a powerful alternative to achieve these goals. Moreover, the rationale for implementation of advanced control and subsequent analysis of its post-match performance also focus on the benefits that this tool brings to the plant. It is therefore essential to establish a methodology for analysis, based on clear and measurable criteria. Currently, there are different methodologies available in the market to assist with such analysis. These tools can have a quantitative or qualitative focus. The aim of this study is to evaluate three of the best current main performance assessment technologies： Minimum Variance Control-Harris Index; Statistical Process Control （Cp and Cpk）; and the Qin and Yu Index. These indexes were studied for an alumina plant controlled by three MPC （model predictive control） algorithms （GPC （generalized predictive control）, RMPCT （robust multivariable predictive control technology） and ESSMPC （extended state space model predictive controller）） with different results.

Study on Factors Influencing Urban-rural Dual Economic Structure of Chongqing Based on the State Space Variable Parameter Method

Firstly,this paper reviews and analyzes historic background of urban-rural integration of Chongqing,and the evolution and trend of urban and rural dual economic structure.On the basis of previous researches,it selects factors and variables influencing urban and rural dual economic structure,and establishes an econometric model.By state space Kalman filtering method,it analyzes dynamic influence of factors upon urban-rural dual economic intensity.According to empirical conclusion,it puts forward corresponding policy recommendations for promoting integrated urban and rural economic development of Chongqing.

State Estimation Moving Window Gradient Iterative Algorithm for Bilinear Systems Using the Continuous Mixed p-norm Technique

This paper studies the parameter estimation problems of the nonlinear systems described by the bilinear state space models in the presence of disturbances.A bilinear state observer is designed for deriving identification algorithms to estimate the state variables using the input-output data.Based on the bilinear state observer,a novel gradient iterative algorithm is derived for estimating the parameters of the bilinear systems by means of the continuous mixed p-norm cost function.The gain at each iterative step adapts to the data quality so that the algorithm has good robustness to the noise disturbance.Furthermore,to improve the performance of the proposed algorithm,a dynamicmoving window is designed which can update the dynamical data by removing the oldest data and adding the newestmeasurement data.A numerical example of identification of bilinear systems is presented to validate the theoretical analysis.

海上风电场经交流海缆并网谐波谐振放大分析

采用交流海缆接入电网的海上风电场在电缆线路分布电容的作用下,可能出现陆上风电场不常见的谐波谐振与谐波放大现象,严重威胁到海上风电场安全可靠运行。为研究海上风电场谐波谐振机理与谐波放大影响因素,首先,建立了海上风电场输电系统与集电系统两部分的状态空间模型,并给出谐波放大倍数、谐波含量等指标的计算方法;其次,通过特征值和参与因子揭示了谐波谐振机理及关键影响因素;然后,通过根轨迹法研究了电网短路容量、高压电缆参数和风电机组并网台数对谐振模态的影响;最后,在Matlab/Simulink仿真平台搭建江苏某海上风电场.验证理论分析的有效性。

模型信息联合校正型自抗扰控制策略

为解决微电网受到不确定扰动时,会对直-直变换器输出的电能质量产生严重影响的问题,该文提出一种模型信息联合校正型自抗扰控制技术(ADRC-MIR)。在该控制策略中,首先借助串联超前校正的思想,以比例微分校正环节对线性扩张状态观测器的扰动观测传递函数进行修正,使其可实现对总和扰动更精确的跟踪;然后,根据状态空间平均法从被控系统中提取部分模型信息,将其写入修正后的线性扩张状态观测器的系数矩阵并最终构建出ADRC-MIR;随后基于理论推导,给出改进控制器的参数整定公式及其物理意义,并从噪声抑制、扰动抑制及其频域特性等方面指出改进后的控制器可提升控制品质的原因。最后通过对比不同工况下的数值仿真验证所提控制策略的可行性与正确性。