As an essential part of DC-Link in the power converter,capacitor plays a crucial role in absorbing ripple current and suppressing ripple voltage.The health and residual service life of the DC-Link capacitor is one of ...As an essential part of DC-Link in the power converter,capacitor plays a crucial role in absorbing ripple current and suppressing ripple voltage.The health and residual service life of the DC-Link capacitor is one of the decisive factors for the safety,stability,and efficiency of the system in which it is located.Aiming at the shortcomings of existing methods,such as low dynamic sensitivity of data update and fluctuation of identification results,a capacitor state identification method based on improved RLS is proposed in this paper.The proposed method is optimized by introducing the forgetting factor algorithm and root means square algorithm to modify the iterative formula and final identification results.Compared with existing methods,this method can identify the capacitor’s current state in real time and accurately.Finally,we successfully verified the accuracy,robustness,and adaptability of the proposed method by a series of experimental tests on a dSPACE platform.展开更多
Fishing logbook records the fishing behaviors and other information of fishing vessels.However,the accuracy of the recorded information is often difficult to guarantee due to the misreport and concealment.The fishing ...Fishing logbook records the fishing behaviors and other information of fishing vessels.However,the accuracy of the recorded information is often difficult to guarantee due to the misreport and concealment.The fishing vessel monitoring system(VMS)can monitor and record the navigation information of fishing vessels in real time,and it may be used to improve the accuracy of identifying the state of fishing vessels.If the VMS data and fishing logbook are combined to establish their relationships,then the navigation characteristics and fishing behavior of fishing vessels can be more accurately identified.Therefore,first,a method for determining the state of VMS data points using fishing log data was proposed.Secondly,the relationship between VMS data and the different states of fishing vessels was further explored.Thirdly,the state of the fishing vessel was predicted using VMS data by building machine learning models.The speed,heading,longitude,latitude,and time as features from the VMS data were extracted by matching the VMS and logbook data of three single otter trawl vessels from September 2012 to January 2013,and four machine learning models were established,i.e.,Random Forest(RF),Adaptive Boosting(AdaBoost),K-Nearest Neighbor(KNN),and Gradient Boosting Decision Tree(GBDT)to predict the behavior of fishing vessels.The prediction performances of the models were evaluated by using normalized confusion matrix and receiver operator characteristic curve.Results show that the importance rankings of spatial(longitude and latitude)and time features were higher than those of speed and heading.The prediction performances of the RF and AdaBoost models were higher than those of the KNN and GBDT models.RF model showed the highest prediction performance for fishing state.Meanwhile,AdaBoost model exhibited the highest prediction performance for non-fishing state.This study offered a technical basis for judging the navigation characteristics of fishing vessels,which improved the algorithm for judging the behavior of fishing vessels based on VMS data,enhanced the prediction accuracy,and upgraded the fishery management being more scientific and efficient.展开更多
High-resolution angle-resolved photoemission measurements are carried out on transition metal dichalcogenide PdTe2 that is a superconductor with a Tc at 1.7K. Combined with theoretical calculations, we discover for th...High-resolution angle-resolved photoemission measurements are carried out on transition metal dichalcogenide PdTe2 that is a superconductor with a Tc at 1.7K. Combined with theoretical calculations, we discover for the first time the existence of topologically nontrivial surface state with Dirac cone in PbTe2 superconductor. It is located at the Brillouin zone center and possesses helical spin texture. Distinct from the usual three-dimensional topological insulators where the Dirac cone of the surface state lies at the Fermi level, the Dirac point of the surface state in PdTe2 lies deeply below the Fermi level at - 1.75 eV binding energy and is well separated from the bulk states. The identification of topological surface state in PdTe2 superconductor deeply below the Fermi level provides a unique system to explore new phenomena and properties and opens a door for finding new topological materials in transition metal ehalcogenides.展开更多
Identification of steady state and transient state plays an important role in modeling,control,optimiza-tion,and fault detection of industrial processes.Many existing methods for state identification are not satisfact...Identification of steady state and transient state plays an important role in modeling,control,optimiza-tion,and fault detection of industrial processes.Many existing methods for state identification are not satisfactory in practical applications due to problems of ideal hypothesis,too many parameters,and poor robustness.In this paper,a novel state identification approach is proposed.The problem of state identification is transformed into finding the noise band of differential signal.For practical application,automatic selection of noise band amplitude is proposed to make the method convenient to be used.Problems of gross errors,low signal-to-noise ratio and online identification are considered.And comparison with other two methods shows that the proposed method has better identification performance.Simulations and experiments also prove the effectiveness and practicability of the proposed method.展开更多
Contact problems are one of the most challenging fields in virtual assembly. Information of contact states could be utilized to realize compliant motion of work pieces, to analyze the contact stress, to assist positio...Contact problems are one of the most challenging fields in virtual assembly. Information of contact states could be utilized to realize compliant motion of work pieces, to analyze the contact stress, to assist positioning parts and so on. Some methods have already been proposed to estimate contact states between objects and in most of these methods contact states between objects are simplified in order to realize real-time visual reality animation. While in virtual assembly contact states between parts are required to analyze contact stress, deformation and quality. Besides the contact state estimation method for virtual assembly should be able to handle a number of complex parts in real time. There are rarely known methods which could meet this requirement till now. In this study a contact state estimation algorithm based on surface-matching for virtual assembly is proposed. Contacts between parts are categorized into six basic types according to contact region of surfaces. Based on continuous collision detection of polyhedral models a novel contact state identification algorithm which is based on surface matching is proposed. Then contact evolution algorithm, which utilizes the extern force and contact information, is implemented to handle evolution of contact state. Finally a prototype system is developed to verify the above technologies. Experiment results reveal that contact state between parts could be estimated correctly in real time virtual assembly. The proposed contact state estimation algorithm provides a complete solution to obtain the contact state between parts in virtual assembly. Information of contact state between parts could be utilized to realize contact dynamic, contact stress analysis, assembly quality analysis, and so on.展开更多
Physical parameters are very important for vehicle dynamic modeling and analysis.However,most of physical parameter identification methods are assuming some physical parameters of vehicle are known,and the other unkno...Physical parameters are very important for vehicle dynamic modeling and analysis.However,most of physical parameter identification methods are assuming some physical parameters of vehicle are known,and the other unknown parameters can be identified.In order to identify physical parameters of vehicle in the case that all physical parameters are unknown,a methodology based on the State Variable Method(SVM) for physical parameter identification of two-axis on-road vehicle is presented.The modal parameters of the vehicle are identified by the SVM,furthermore,the physical parameters of the vehicle are estimated by least squares method.In numerical simulations,physical parameters of Ford Granada are chosen as parameters of vehicle model,and half-sine bump function is chosen to simulate tire stimulated by impulse excitation.The first numerical simulation shows that the present method can identify all of the physical parameters and the largest absolute value of percentage error of the identified physical parameter is 0.205%;and the effect of the errors of additional mass,structural parameter and measurement noise are discussed in the following simulations,the results shows that when signal contains 30 d B noise,the largest absolute value of percentage error of the identification is 3.78%.These simulations verify that the presented method is effective and accurate for physical parameter identification of two-axis on-road vehicles.The proposed methodology can identify all physical parameters of 7-DOF vehicle model by using free-decay responses of vehicle without need to assume some physical parameters are known.展开更多
In this paper,an analysis for ill conditioning problem in subspace identifcation method is provided.The subspace identifcation technique presents a satisfactory robustness in the parameter estimation of process model ...In this paper,an analysis for ill conditioning problem in subspace identifcation method is provided.The subspace identifcation technique presents a satisfactory robustness in the parameter estimation of process model which performs control.As a frst step,the main geometric and mathematical tools used in subspace identifcation are briefly presented.In the second step,the problem of analyzing ill-conditioning matrices in the subspace identifcation method is considered.To illustrate this situation,a simulation study of an example is introduced to show the ill-conditioning in subspace identifcation.Algorithms numerical subspace state space system identifcation(N4SID)and multivariable output error state space model identifcation(MOESP)are considered to study,the parameters estimation while using the induction motor model,in simulation(Matlab environment).Finally,we show the inadequacy of the oblique projection and validate the efectiveness of the orthogonal projection approach which is needed in ill-conditioning;a real application dealing with induction motor parameters estimation has been experimented.The obtained results proved that the algorithm based on orthogonal projection MOESP,overcomes the situation of ill-conditioning in the Hankel s block,and thereby improving the estimation of parameters.展开更多
A model-based estimator design and implementation is described in this paper to undertake combined estimation of vehicle states and tire-road friction coefficients.The estimator is designed based on a vehicle model wi...A model-based estimator design and implementation is described in this paper to undertake combined estimation of vehicle states and tire-road friction coefficients.The estimator is designed based on a vehicle model with three degrees of freedom(3-DOF) and the dual extended Kalman filter(DEKF) technique is employed.Effectiveness of the estimation is examined and validated by comparing the outputs of the estimator with the responses of the vehicle model in CarSim in three typical road adhesion conditions(high-friction,low-friction,and joint-friction roads).Simulation results demonstrate that the DEKF estimator algorithm designed is able to obtain vehicle states(e.g.,yaw rate and roll angle) as well as road friction coefficients with reasonable accuracy.展开更多
基金Natural Science Foundation of Hunan Province(2020JJ5757).
文摘As an essential part of DC-Link in the power converter,capacitor plays a crucial role in absorbing ripple current and suppressing ripple voltage.The health and residual service life of the DC-Link capacitor is one of the decisive factors for the safety,stability,and efficiency of the system in which it is located.Aiming at the shortcomings of existing methods,such as low dynamic sensitivity of data update and fluctuation of identification results,a capacitor state identification method based on improved RLS is proposed in this paper.The proposed method is optimized by introducing the forgetting factor algorithm and root means square algorithm to modify the iterative formula and final identification results.Compared with existing methods,this method can identify the capacitor’s current state in real time and accurately.Finally,we successfully verified the accuracy,robustness,and adaptability of the proposed method by a series of experimental tests on a dSPACE platform.
基金Supported by the Public Welfare Technology Application Research Project of China(No.LGN21C190009)the Science and Technology Project of Zhoushan Municipality,Zhejiang Province(No.2022C41003)。
文摘Fishing logbook records the fishing behaviors and other information of fishing vessels.However,the accuracy of the recorded information is often difficult to guarantee due to the misreport and concealment.The fishing vessel monitoring system(VMS)can monitor and record the navigation information of fishing vessels in real time,and it may be used to improve the accuracy of identifying the state of fishing vessels.If the VMS data and fishing logbook are combined to establish their relationships,then the navigation characteristics and fishing behavior of fishing vessels can be more accurately identified.Therefore,first,a method for determining the state of VMS data points using fishing log data was proposed.Secondly,the relationship between VMS data and the different states of fishing vessels was further explored.Thirdly,the state of the fishing vessel was predicted using VMS data by building machine learning models.The speed,heading,longitude,latitude,and time as features from the VMS data were extracted by matching the VMS and logbook data of three single otter trawl vessels from September 2012 to January 2013,and four machine learning models were established,i.e.,Random Forest(RF),Adaptive Boosting(AdaBoost),K-Nearest Neighbor(KNN),and Gradient Boosting Decision Tree(GBDT)to predict the behavior of fishing vessels.The prediction performances of the models were evaluated by using normalized confusion matrix and receiver operator characteristic curve.Results show that the importance rankings of spatial(longitude and latitude)and time features were higher than those of speed and heading.The prediction performances of the RF and AdaBoost models were higher than those of the KNN and GBDT models.RF model showed the highest prediction performance for fishing state.Meanwhile,AdaBoost model exhibited the highest prediction performance for non-fishing state.This study offered a technical basis for judging the navigation characteristics of fishing vessels,which improved the algorithm for judging the behavior of fishing vessels based on VMS data,enhanced the prediction accuracy,and upgraded the fishery management being more scientific and efficient.
基金the National Natural Science Foundation of China under Grant Nos 11190022,11274359 and 11422428the National Basic Research Program of China under Grant Nos 2011CB921703,2011CBA00110,2011CBA00108 and 2013CB921700the Strategic Priority Research Program(B)of the Chinese Academy of Sciences under Grant Nos XDB07020300 and XDB07020100
文摘High-resolution angle-resolved photoemission measurements are carried out on transition metal dichalcogenide PdTe2 that is a superconductor with a Tc at 1.7K. Combined with theoretical calculations, we discover for the first time the existence of topologically nontrivial surface state with Dirac cone in PbTe2 superconductor. It is located at the Brillouin zone center and possesses helical spin texture. Distinct from the usual three-dimensional topological insulators where the Dirac cone of the surface state lies at the Fermi level, the Dirac point of the surface state in PdTe2 lies deeply below the Fermi level at - 1.75 eV binding energy and is well separated from the bulk states. The identification of topological surface state in PdTe2 superconductor deeply below the Fermi level provides a unique system to explore new phenomena and properties and opens a door for finding new topological materials in transition metal ehalcogenides.
文摘Identification of steady state and transient state plays an important role in modeling,control,optimiza-tion,and fault detection of industrial processes.Many existing methods for state identification are not satisfactory in practical applications due to problems of ideal hypothesis,too many parameters,and poor robustness.In this paper,a novel state identification approach is proposed.The problem of state identification is transformed into finding the noise band of differential signal.For practical application,automatic selection of noise band amplitude is proposed to make the method convenient to be used.Problems of gross errors,low signal-to-noise ratio and online identification are considered.And comparison with other two methods shows that the proposed method has better identification performance.Simulations and experiments also prove the effectiveness and practicability of the proposed method.
基金supported by National Natural Science Foundation of China (Grant No. 50805009)Fund of National Engineering and Research Center for Commercial Aircraft Manufacturing of China (Grant No. 07205)
文摘Contact problems are one of the most challenging fields in virtual assembly. Information of contact states could be utilized to realize compliant motion of work pieces, to analyze the contact stress, to assist positioning parts and so on. Some methods have already been proposed to estimate contact states between objects and in most of these methods contact states between objects are simplified in order to realize real-time visual reality animation. While in virtual assembly contact states between parts are required to analyze contact stress, deformation and quality. Besides the contact state estimation method for virtual assembly should be able to handle a number of complex parts in real time. There are rarely known methods which could meet this requirement till now. In this study a contact state estimation algorithm based on surface-matching for virtual assembly is proposed. Contacts between parts are categorized into six basic types according to contact region of surfaces. Based on continuous collision detection of polyhedral models a novel contact state identification algorithm which is based on surface matching is proposed. Then contact evolution algorithm, which utilizes the extern force and contact information, is implemented to handle evolution of contact state. Finally a prototype system is developed to verify the above technologies. Experiment results reveal that contact state between parts could be estimated correctly in real time virtual assembly. The proposed contact state estimation algorithm provides a complete solution to obtain the contact state between parts in virtual assembly. Information of contact state between parts could be utilized to realize contact dynamic, contact stress analysis, assembly quality analysis, and so on.
基金Supported by National Natural Science Foundation of China(Grant Nos.51175157,U124208)
文摘Physical parameters are very important for vehicle dynamic modeling and analysis.However,most of physical parameter identification methods are assuming some physical parameters of vehicle are known,and the other unknown parameters can be identified.In order to identify physical parameters of vehicle in the case that all physical parameters are unknown,a methodology based on the State Variable Method(SVM) for physical parameter identification of two-axis on-road vehicle is presented.The modal parameters of the vehicle are identified by the SVM,furthermore,the physical parameters of the vehicle are estimated by least squares method.In numerical simulations,physical parameters of Ford Granada are chosen as parameters of vehicle model,and half-sine bump function is chosen to simulate tire stimulated by impulse excitation.The first numerical simulation shows that the present method can identify all of the physical parameters and the largest absolute value of percentage error of the identified physical parameter is 0.205%;and the effect of the errors of additional mass,structural parameter and measurement noise are discussed in the following simulations,the results shows that when signal contains 30 d B noise,the largest absolute value of percentage error of the identification is 3.78%.These simulations verify that the presented method is effective and accurate for physical parameter identification of two-axis on-road vehicles.The proposed methodology can identify all physical parameters of 7-DOF vehicle model by using free-decay responses of vehicle without need to assume some physical parameters are known.
基金supported by the Ministry of Higher Education and Scientific Research of Tunisia
文摘In this paper,an analysis for ill conditioning problem in subspace identifcation method is provided.The subspace identifcation technique presents a satisfactory robustness in the parameter estimation of process model which performs control.As a frst step,the main geometric and mathematical tools used in subspace identifcation are briefly presented.In the second step,the problem of analyzing ill-conditioning matrices in the subspace identifcation method is considered.To illustrate this situation,a simulation study of an example is introduced to show the ill-conditioning in subspace identifcation.Algorithms numerical subspace state space system identifcation(N4SID)and multivariable output error state space model identifcation(MOESP)are considered to study,the parameters estimation while using the induction motor model,in simulation(Matlab environment).Finally,we show the inadequacy of the oblique projection and validate the efectiveness of the orthogonal projection approach which is needed in ill-conditioning;a real application dealing with induction motor parameters estimation has been experimented.The obtained results proved that the algorithm based on orthogonal projection MOESP,overcomes the situation of ill-conditioning in the Hankel s block,and thereby improving the estimation of parameters.
基金Project (Nos.50775096 and 51075176) supported by the National Natural Science Foundation of China
文摘A model-based estimator design and implementation is described in this paper to undertake combined estimation of vehicle states and tire-road friction coefficients.The estimator is designed based on a vehicle model with three degrees of freedom(3-DOF) and the dual extended Kalman filter(DEKF) technique is employed.Effectiveness of the estimation is examined and validated by comparing the outputs of the estimator with the responses of the vehicle model in CarSim in three typical road adhesion conditions(high-friction,low-friction,and joint-friction roads).Simulation results demonstrate that the DEKF estimator algorithm designed is able to obtain vehicle states(e.g.,yaw rate and roll angle) as well as road friction coefficients with reasonable accuracy.