期刊文献+
共找到81篇文章
< 1 2 5 >
每页显示 20 50 100
Seismic Response Analysis of Steel Structure Isolation System Under Long-Period Seismic Motion
1
作者 Long Yu Mei Sheng +1 位作者 Huan Feng Jianan Hu 《Journal of Architectural Research and Development》 2024年第3期147-155,共9页
To analyze the seismic response of steel structure isolation systems under long-period seismic motion,a 9-story steel frame building was selected as the subject.Five steel structure finite element models were establis... To analyze the seismic response of steel structure isolation systems under long-period seismic motion,a 9-story steel frame building was selected as the subject.Five steel structure finite element models were established using SAP2000.Response spectrum analysis was conducted on the seismic motion to determine if it adhered to the characteristics of long-period seismic motion.Modal analysis of each structural model revealed that the isolation structure significantly prolonged the structural natural vibration period and enhanced seismic performance.Base reactions and floor displacements of various structures notably increased under long-period seismic motion compared to regular seismic activity.Placing isolation bearings in the lower part of the structure proved more effective under long-period seismic motion.In seismic design engineering,it is essential to consider the impact of long-period seismic motion on structures and the potential failure of isolation bearings. 展开更多
关键词 Long-period seismic motion steel structure Mid-story isolation structure Isolation bearing Seismic performance
下载PDF
Fault Identification for Shear-Type Structures Using Low-Frequency Vibration Modes
2
作者 Cuihong Li Qiuwei Yang Xi Peng 《Computer Modeling in Engineering & Sciences》 SCIE EI 2024年第3期2769-2791,共23页
Shear-type structures are common structural forms in industrial and civil buildings,such as concrete and steel frame structures.Fault diagnosis of shear-type structures is an important topic to ensure the normal use o... Shear-type structures are common structural forms in industrial and civil buildings,such as concrete and steel frame structures.Fault diagnosis of shear-type structures is an important topic to ensure the normal use of structures.The main drawback of existing damage assessment methods is that they require accurate structural finite element models for damage assessment.However,for many shear-type structures,it is difficult to obtain accurate FEM.In order to avoid finite elementmodeling,amodel-freemethod for diagnosing shear structure defects is developed in this paper.This method only needs to measure a few low-order vibration modes of the structure.The proposed defect diagnosis method is divided into two stages.In the first stage,the location of defects in the structure is determined based on the difference between the virtual displacements derived from the dynamic flexibility matrices before and after damage.In the second stage,damage severity is evaluated based on an improved frequency sensitivity equation.Themain innovations of this method lie in two aspects.The first innovation is the development of a virtual displacement difference method for determining the location of damage in the shear structure.The second is to improve the existing frequency sensitivity equation to calculate the damage degree without constructing the finite elementmodel.Thismethod has been verified on a numerical example of a 22-story shear frame structure and an experimental example of a three-story steel shear structure.Based on numerical analysis and experimental data validation,it is shown that this method only needs to use the low-order modes of structural vibration to diagnose the defect location and damage degree,and does not require finite element modeling.The proposed method should be a very simple and practical defect diagnosis technique in engineering practice. 展开更多
关键词 Fault diagnosis shear steel structure vibration mode dynamic flexibility frequency sensitivity
下载PDF
Analysis of Soundproof Technology of Assembled Steel Structure Houses
3
作者 Jing Sun 《Journal of World Architecture》 2023年第5期66-71,共6页
The problem of noise has always been highlighted in assembled steel structure houses.Therefore,it is necessary to use effective soundproof measures where steel beams intersect with the reserved line pipe openings,door... The problem of noise has always been highlighted in assembled steel structure houses.Therefore,it is necessary to use effective soundproof measures where steel beams intersect with the reserved line pipe openings,doors,windows,elevator shafts,and other locations.In this paper,we will investigate the areas with subpar soundproof performance in an assembled steel structure residential project and propose suitable noise control measures to address this issue. 展开更多
关键词 Assembled steel structure Residential engineering Sound insulation Construction technology Online publication:October 25 2023
下载PDF
Discussion on Construction Technology and Welding Deformation of High-Rise Steel Frame Structure
4
作者 Sijin He Xinzhong Leng 《Journal of World Architecture》 2023年第5期23-28,共6页
Because of urbanization,land resources in China’s cities has become increasingly scarce.Therefore,modern buildings are becoming taller,making high-rise steel frame structures the new favorite of the construction indu... Because of urbanization,land resources in China’s cities has become increasingly scarce.Therefore,modern buildings are becoming taller,making high-rise steel frame structures the new favorite of the construction industry.However,the construction of high-rise steel frame structures requires advanced technology.If the construction technology is effectively implemented and the welding techniques of the construction personnel align with the requirements for high-rise steel frame structures,it can help mitigate deformations in the steel structure,thus preserving the overall construction quality of high-rise steel frame structures.To enhance the applicability of steel frame structures in high-rise buildings,this paper focuses on analyzing the optimization path for the construction process of high-rise steel frame structures.It introduces a tailored approach to control welding-induced deformations in steel frame structures,aiming to make a valuable contribution to the advancement of China’s construction industry. 展开更多
关键词 High-rise steel frame structure Construction technology Welding deformation Structural stability
下载PDF
Effect of Perlite on Fire Protection of Waterborne Coatings for Steel Structure
5
作者 Hao Huang Xinguo Ge +2 位作者 Zejiang Zhang Pingli Li Tianhao Zhang 《Journal of Materials Science and Chemical Engineering》 2020年第12期1-7,共7页
<div style="text-align:justify;"> In this paper, perlite was used as a kind of modifier to prepare waterborne fire resistive coatings for steel structure. The influence of perlite on the properties of ... <div style="text-align:justify;"> In this paper, perlite was used as a kind of modifier to prepare waterborne fire resistive coatings for steel structure. The influence of perlite on the properties of the fire resistive coatings was investigated with the help of thermogravimetric analysis (TGA), micro-scale combustion calorimetry (MCC) and fire protection test. The TGA results showed that the char residue weight of the coatings was increased when perlite was loaded and the anti-oxidation performance was enhanced as well and MCC data indicated the addition of perlite reduced the peak heat release rate and total heat release. After the fire protection test, the results confirmed that the fire resistant time of the coating coated with 5 wt% perlite increased up to 114.4 min when the temperature of the sample boards’ backside reached 500?C. </div> 展开更多
关键词 fire Resistive Coating Waterborne Coating EPOXY steel structure
下载PDF
Laser cleaning of steel structure surface for paint removal and repaint adhesion 被引量:27
6
作者 Xiaoguang Li Tingting Huang +3 位作者 Ang Wei Chong Rui Zhou Yoo Sang Choo Minghui Hong 《光电工程》 CAS CSCD 北大核心 2017年第3期340-344,共5页
Paint removal from steel structure is executed for shipyards of marine and offshore engineering.Due to environmental unfriendliness and unhealthy drawbacks of sand blasting technique, laser ablation technique is propo... Paint removal from steel structure is executed for shipyards of marine and offshore engineering.Due to environmental unfriendliness and unhealthy drawbacks of sand blasting technique, laser ablation technique is proposed as a substituting method.By absorbing high energy of the 1064 nm pulsed laser, the paint is vaporized quickly.The ablated debris is then collected by using a suction pump.Initial metal surface of the steel is exposed when laser beam irradiates perpendicularly and scans over it.The cleaned surface fulfills the requirements of surface preparation standards ISO 8501 of SA2.The adhesion is further characterized with pull-off test after carrying out painting with Jotamastic 87 aluminum paint.The repainting can be embedded onto the laser cleaned surface to bond much more tightly.The excellent adhesion strength of 20 MPa between repainted coating and the substrate is achieved, which is higher than what is required by shipyards applications. 展开更多
关键词 LASER steel structure surface paint removal repainting adhesion
下载PDF
Preliminary investigation of seismic damage to two steel space structures during the 2013 Lushan earthquake 被引量:11
7
作者 Dai Junwu Qu Zhe +1 位作者 Zhang Chenxiao Weng Xuran 《Earthquake Engineering and Engineering Vibration》 SCIE EI CSCD 2013年第3期497-500,共4页
Severe damage to steel space structures is rarely reported when compared to other structural systems damaged during past major earthquakes around the world. Two gymnasiums of steel space structures in downtown Lushan ... Severe damage to steel space structures is rarely reported when compared to other structural systems damaged during past major earthquakes around the world. Two gymnasiums of steel space structures in downtown Lushan County that were damaged during the 2013 M7.0 Lushan earthquake in China were investigated and the observations are summarized in this paper. Typical damage to these two steel space structures ranges from moderate to severe. Moderate damage includes global buckling and dislocation of bolted connections of truss members, and inelastic elongation of anchor bolts and sliding of pedestal plates of supports. Severe damage includes member fracture caused by local buckling, and fracture failure of anchor bolts and welds. The distribution of structural damage to these two structures is described in detail and future research opportunities are suggested. 展开更多
关键词 Lushan earthquake steel space structure gymnasitun seismic damage member buckling fracture failure
下载PDF
Methodology to Estimate Remaining Service Life of Steel Structure by Possibilistic Reliability Theory 被引量:7
8
作者 XU Gening YANG Ruigang +1 位作者 ZHOU Ke FAN Xiaoning 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2010年第6期780-787,共8页
Steel structure system of crane deteriorates over time due to environmental effects, material fatigue, and overloading. System structural reliability and remaining service life assessment methods are developed during ... Steel structure system of crane deteriorates over time due to environmental effects, material fatigue, and overloading. System structural reliability and remaining service life assessment methods are developed during the few decades. But until now estimating remaining service life methods of crane steel system by reliability theory begin to develop. Safety assessment of existing steel structure system requires the development of a methodology that allows for an accurate evaluation of reliability and prediction of the remaining life. Steel structures are the supporting elements in the special equipment such as hoisting machinery. Structure reliability and remaining service life safe assessment are important for steel structures. For finding the reason which caused the failure modes (such as fatigue strength failure, stiffness failure and stability failure), incremental loading method based on possibilistic reliability is applied into dynamic structure failure path research. Through reliability analyzing and calculating for crane, it is demonstrated that fatigue damage is the most common failure mode. Fuzzy fatigue damage accumulation theory is used for basis theory and Paris-Eadogan equations are used for mathematical modeling. All fatigue parameter values of the welding box girder of bridge cranes are determined and fatigue remaining life formulas are deduced. After field test and collecting working parameters of numerous cranes, typical fatigue load spectrum was compiled for the dangerous point of box girders used in the area. Fatigue remaining life is assessed for different types and lifting capacities. Safety for steel structure system of bridge crane is assessed by two quantitative indexs: reliability and remaining life. Therefore, the evaluation means is more comprehensive and reasonable. The example shows that the two quantitative indexs are mutually correlated. Through analyzing the 120 t-22.5 m bridge crane of a certain enterprise, a new methodology to estimate remaining service life of steel structure by possibilistic reliability theory is introduced for safety evaluation of structure system. 展开更多
关键词 steel structure system fuzzy fatigue damage possibilistic reliability
下载PDF
Finite element model updating for large span spatial steel structure considering uncertainties 被引量:4
9
作者 滕军 朱焰煌 +2 位作者 周峰 李惠 欧进萍 《Journal of Central South University》 SCIE EI CAS 2010年第4期857-862,共6页
In order to establish the baseline finite element model for structural health monitoring,a new method of model updating was proposed after analyzing the uncertainties of measured data and the error of finite element m... In order to establish the baseline finite element model for structural health monitoring,a new method of model updating was proposed after analyzing the uncertainties of measured data and the error of finite element model.In the new method,the finite element model was replaced by the multi-output support vector regression machine(MSVR).The interval variables of the measured frequency were sampled by Latin hypercube sampling method.The samples of frequency were regarded as the inputs of the trained MSVR.The outputs of MSVR were the target values of design parameters.The steel structure of National Aquatic Center for Beijing Olympic Games was introduced as a case for finite element model updating.The results show that the proposed method can avoid solving the problem of complicated calculation.Both the estimated values and associated uncertainties of the structure parameters can be obtained by the method.The static and dynamic characteristics of the updated finite element model are in good agreement with the measured data. 展开更多
关键词 model updating UNCERTAINTY interval analysis multi-output support vector regression large span spatial steel structure
下载PDF
Numerical Simulation of Dynamic Response and Collapse for Steel Frame Structures Subjected to Blast Load 被引量:4
10
作者 张秀华 段忠东 张春巍 《Transactions of Tianjin University》 EI CAS 2008年第B10期523-529,共7页
The progressive collapse of steel frame structures under the blast load was investigated using LS-DYNA. The multi-material Eulerian and Lagrangian coupling algorithm was adopted. A flu-id-structure coupling finite ele... The progressive collapse of steel frame structures under the blast load was investigated using LS-DYNA. The multi-material Eulerian and Lagrangian coupling algorithm was adopted. A flu-id-structure coupling finite element model was established which consists of Lagrange element for simulating steel frame structures and concrete ground, multiple ALE element for simulating air and TNT explosive material. Numerical simulations of the blast pressure wave propagation, struc-tural dynamic responses and deformation, and progressive collapse of a five-story steel frame structure in the event of an explosion near above ground were performed. The numerical analysis showed that the Lagrangian and Eulerian coupling algorithm gave good simulations of the shock wave propagation in the mediums and blast load effects on the structure. The columns subjected to blast load may collapse by shear yielding rather than by flexural deformation. The columns and joints of steel beam to column in the front steel frame structure generated enormous plastic defor-mation subjected to intensive blast waves, and columns lost carrying capacity, subsequently lead-ing to the collapse of the whole structure. The approach coupling influence between struc-tural deformation and fluid load well simulated the progressive collapse process of structures, and provided an effective tool for analyzing the collapse mechanism of the steel frame structure under blast load. 展开更多
关键词 blast load progressive collapse steel frame structures numerical simulation finite element
下载PDF
Wind Vibration Study of Long-span Steel Arch Structure of Beijing Capital International Airport 被引量:4
11
作者 周岱 马俊 +1 位作者 朱忠义 柳杰 《Journal of Shanghai Jiaotong university(Science)》 EI 2005年第4期429-435,共7页
The wind-induced dynamic response of long-span light-weight steel arch structure of the global transportation center (GTC) of Beijing Capital International Airport was studied. A composite technique with combination o... The wind-induced dynamic response of long-span light-weight steel arch structure of the global transportation center (GTC) of Beijing Capital International Airport was studied. A composite technique with combination of WAWS(Weighted Amplitude Wavelet Superposition) and FFT(Fast Fourier Transformation) was introduced to simulate wind velocity time series of hundreds of spatial points simultaneously. The structural shape factors of wind load was obtained from wind tunnel model test. The wind vibration factor based on structural displacement response was investigated. After comparing the computational results with wind tunnel model test data, it was found out that the two results accord with each other if wind comes from 0° direction angle, but are quite different if wind comes from 180° direction angle in the area blocked off by airport terminals. The possible reasons of this difference were analyzed. Haar wavelet was used to transform and analyze wind velocity time series and structural wind-induced dynamic responses. The relationship between exciting wind loads and structural responses was studied in time and frequency domains. 展开更多
关键词 steel arch structure wind velocity time series wind-induced vibration factor wavelet analysis
下载PDF
Analysis on seismic performance of a new type of joint in steel structures 被引量:1
12
作者 Li Xiaodong Ma Guangtian Yan Yinji 《Journal of Southeast University(English Edition)》 EI CAS 2021年第3期290-298,共9页
To examine the seismic performance of a newly fabricated weakened joint at the beam end position,four groups of energy-consuming steel plates with different weakening depths and thicknesses were subjected to horizonta... To examine the seismic performance of a newly fabricated weakened joint at the beam end position,four groups of energy-consuming steel plates with different weakening depths and thicknesses were subjected to horizontal cyclic reciprocating loading tests on beam ends.The tests were designed to evaluate the beams'hysteresis curve,skeleton curve,bearing capacity degradation curve,stiffness degradation curve,and ductility and the nodes'energy dissipation capacity.The test results show that a newly fabricated joint will not undergo brittle damage when the beam-column joint is welded at a displacement of 105 mm.Thus,the hysteresis curve will show an inverse S shape,and an obvious slip phenomenon will occur,which is mainly due to splicing.The diameter of the bolt connecting the slab to the beam flange is slightly smaller than the aperture.Due to the existence of slippage,the skeleton curve has no evident yield point.The joint ductility coefficient is less than 3.0,and the initial rotational stiffness of the joint is also small.The buckling of the splicing panel causes a rapid decrease in the joint bearing capacity.The main approaches,appropriately reducing the weakening depth and increasing the thickness of the splicing plate,can delay the occurrence of buckling and improve the ductility of the joint. 展开更多
关键词 steel structure energy-dissipating members weakened joint seismic performance cyclic loading tests
下载PDF
MICROSTRUCTURE TRANSFORMATION IN THE WELDING HEAT AFFECTED ZONE OF 800MPa GRADE ULTRA FINE STRUCTURED STEEL 被引量:1
13
作者 J.B. Liu L.J. Hu +3 位作者 Y.T.Wang Z. Q. Liu K. Miao Z.L. Tian 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2004年第3期238-246,共9页
The transformation behavior and microstructure development in the heat affected zone(HAZ)of 800MPa grade ultra fine structured steel was investigated.It was found that the HAZ has intermediate temperature transformati... The transformation behavior and microstructure development in the heat affected zone(HAZ)of 800MPa grade ultra fine structured steel was investigated.It was found that the HAZ has intermediate temperature transformation characteristics in a wide range of cooling rates,with the bainite sheaves consisting of bainite ferrite plates without carbide precipitation and retained austenite in the fast cooling regime.At relatively high cooling rates,which corresponded to low heat inputs,the hardness of the simulated HAZ was above that of the base metal.When the cooling rate was below 9C/s,the welding HAZ would have an obvious softening.The analysis of transformation rates in continuous cooling processes was completed by numerical differential method.The result indicated that the microstructure transformation rate of the HAZ in 800MPa grade ultra fine structured steel changed sharply to slow speeds when the cooling time t8/5 is longer than 7s. 展开更多
关键词 ultra fine structured steel WELD heat affected zone transformation rate microstructure
下载PDF
Effect of grain boundary sliding on the toughness of ultrafine grain structure steel: A molecular dynamics simulation study 被引量:1
14
作者 谢红献 刘波 +1 位作者 殷福星 于涛 《Chinese Physics B》 SCIE EI CAS CSCD 2013年第1期54-61,共8页
Molecular dynamics simulations are carried out to investigate the mechanisms of low-temperature impact toughness of the ultrafine grain structure steel. The simulation results suggest that the sliding of the {001 }/{ ... Molecular dynamics simulations are carried out to investigate the mechanisms of low-temperature impact toughness of the ultrafine grain structure steel. The simulation results suggest that the sliding of the {001 }/{ 110} type and { 110}/{ 111 } type grain boundary can improve the impact toughness. Then, the mechanism of grain boundary sliding is studied and it is found that the motion of dislocations along the grain boundary is the underlying cause of the grain boundary sliding. Finally, the sliding of the grain boundary is analyzed from the standpoint of the energy. We conclude that the measures which can increase the quantity of the {001}/{110} type and {110}/{ 111} type grain boundary and elongate the free gliding distance of dislocations along these grain boundaries will improve the low-temperature impact toughness of the ultrafine grain structure steel. 展开更多
关键词 molecular dynamics simulations grain boundary CRACK ultrafine grain structure steel
下载PDF
Integrity Design Strategy in Steel Structure Bridge Design 被引量:1
15
作者 Meng Wan 《Journal of World Architecture》 2021年第4期21-24,共4页
Nowadays,the scope of bridge construction projects in China is becoming wider,which promotes China's economic development to a large extent and also improves China's transportation system.Meanwhile,people also... Nowadays,the scope of bridge construction projects in China is becoming wider,which promotes China's economic development to a large extent and also improves China's transportation system.Meanwhile,people also put forward new requirements for the quality of steel structure bridges.However,in actual design,due to the influence of many fectors,some problems are inevitable,which will affect the integrity of the design.Therefore,the designer needs to fully grasp the possible design problems,and then take efiective measures to improve the integrity of the design scheme,so as to ensure the quality of the steel structure bridge and improves the safety of the steel structure bridge from the fundamentals.This paper mainly focuses on steel structure bridges,analyzed the current status of steel structure bridge types and their selection,and proposes the integrity design strategy of steel structure bridges. 展开更多
关键词 steel structure bridge INTEGRITY DESIGN
下载PDF
A Virtual Erection Simulation System for a Steel Structure Based on 3-D Measurement Data
16
作者 Deok Eun Kim Tuo Han Chen 《Journal of Marine Science and Application》 2012年第1期52-58,共7页
he virtual erection simulation system was explained for a steel structure including ship and ocean plant blocks. The simulation system predicted the erection state to optimize any gap or overlap of blocks based on 3-D... he virtual erection simulation system was explained for a steel structure including ship and ocean plant blocks. The simulation system predicted the erection state to optimize any gap or overlap of blocks based on 3-D measurement data. The blocks were modified (cut) on the basis of the simulation result on the ground before erecting them by crane. The re-cutting process was not required and the blocks were erected into a mother ship speedily. Therefore, the erection time is reduced, increasing the dock turnover. 展开更多
关键词 block erection dimensional accuracy control 'of ship block production planning and scheduling ship construction virtual simulation system steel structure
下载PDF
Determination Method on Initial Pretension of Cables in Steel Mega Frame and Prestressed Composite Bracing Structure
17
作者 唐柏鉴 王飞 顾盛 《Journal of Donghua University(English Edition)》 EI CAS 2013年第6期455-460,共6页
Determining initial pretension values of pre-stressed cables is one of the key problems for a steel mega frame and pre-stressed composite bracing structure.Through the mechanical analysis of the composite bracing unde... Determining initial pretension values of pre-stressed cables is one of the key problems for a steel mega frame and pre-stressed composite bracing structure.Through the mechanical analysis of the composite bracing under vertical loading,the critical factors deciding the initial pretention value were found.According to these factors,a rule for the initial pretension value was put forward.The determination equations were acquired based on the principle of force equilibrium at nodes.The numerical results indicate that the internal force disequilibrium in composite bracings resulted from symmetrical load can be eliminated only in a symmetrical way,so that initial pretention values are decided only by vertical loads.The influencing coefficient leveling method,taking into account interactions between story and story,is accurate and feasible. 展开更多
关键词 pre-stressed steel structure mega frame composite bracing initial presention influencin coefllcient levelinf method
下载PDF
Usage of Polyurethane Foam Acoustic Insulation in Cineplex Steel Structure
18
作者 Marko Pavlovic Zlatko Markovic Milan Spremic Dragan Budevac 《Journal of Civil Engineering and Architecture》 2012年第11期1577-1583,共7页
Modern public buildings, such as multiplex cinemas and theaters, along with application of state of the art sound effects bring high acoustic insulation demands. Cinemas are often a part of building complexes such as ... Modern public buildings, such as multiplex cinemas and theaters, along with application of state of the art sound effects bring high acoustic insulation demands. Cinemas are often a part of building complexes such as shopping malls with subjects that produce serious level of noise and vibrations. Apart to regular use of polyurethane in thermal insulation purposes, it is widely used in field of acoustic insulation. Usage of polyurethane foam pads, with specific dynamic characteristics, as a base for structure supports gives a wide range of possibilities in controlling the amount of structural noise and vibrations transferred to the structure. Structure itself and acoustical pads becomes an integral system that behaves together and need to be analyzed as a whole in extensive design. Dynamic characteristics of acoustic pads depend on stress level and in same time they represent elastic supports to the structure and therefore analyzes and design is an iterative process. In other way, introduce of non-conventional material in bearing structure brings some issues, such as transfer of shear forces, that has to be governed by proper structural detailing. There are several possibilities of application in bearing structures, such as above and below steel structure. This paper gives an overall view on polyurethane as material, construction and design principles and example of usage of acoustic pads in steel structure of"Ster" cineplex in Belgrade. 展开更多
关键词 steel structure POLYURETHANE ACOUSTIC CONNECTION noise
下载PDF
Selection and modification of ground motion records using Newmark-Hall spectrum as target spectrum for long-period structures 被引量:1
19
作者 Fu Jianyu Wang Dongsheng +1 位作者 Zhang Rui Chen Xiaoyu 《Earthquake Engineering and Engineering Vibration》 SCIE EI CSCD 2023年第1期117-134,共18页
Input ground motions have significant impacts on the uncertainty of structural responses in time-history analysis.In this study,records were selected and scaled for the evaluation of mean structural responses accordin... Input ground motions have significant impacts on the uncertainty of structural responses in time-history analysis.In this study,records were selected and scaled for the evaluation of mean structural responses according to the target spectrum.The Newmark-Hall spectrum is closely related to seismic response of short,medium and long-period structures,so it was taken as the target spectrum here.The nonlinear time-history analyses of 9-story and 20-story steel moment-resisting frame structures were carried out as examples.They represent medium and long-period buildings,respectively.Three target spectra with risk of 50%,10%and 2%probabilities for exceedance in 50 years were calculated by the average Newmark-Hall spectrum method for three ground motion sets developed in the SAC Steel Project.The predicted structural mean responses of these Newmark-Hall spectra were compared with those calculated by the average spectral acceleration method for the same record set.It is found that both methods have similar accuracy for estimating the structural mean response.However,the method proposed herein is more effective in reducing the variability of the structural responses.Also,the proposed method is more advantageous for the time-history analysis of long-period structures or structures with more severe nonlinear responses under strong seismic excitations. 展开更多
关键词 time-history analysis selection and modification of ground motions target spectrum Newmark-Hall spectrum steel moment resisting frame structure
下载PDF
The Continuum Analytical Method of Steel Frame- Reinforced Concrete Shear Wall Mixed Structure
20
作者 Jian Liu Xiangyun Huang +2 位作者 Guangen Zhou Jiping Hao Zenglin Xing 《Journal of Civil Engineering and Architecture》 2011年第4期368-374,共7页
The inter-story drift stiffness considered the semirigidity of beam and column joints connection, and P-Delta second order effect of steel frame parts in the mixed structure is presented in the paper. After considerin... The inter-story drift stiffness considered the semirigidity of beam and column joints connection, and P-Delta second order effect of steel frame parts in the mixed structure is presented in the paper. After considering on the influence of semirigidity between steel beams and steel columns, second order effect of beam-column members for steel frame and structural second order effect, the traditional continuum analytial method used in RC shear-frames wall structure is developed to steel frames-reinforced concrete shear wall mixed structure subject to horizontal load in this paper. A continuum approach, which is suitable for analyzing steel frames-reinforced concrete shear wall mixed structure subject to horizontal load, is presented. The method is relatively simple and more practical. It will be referred to structural design for steel frames-reinforced concrete shear wall mixed structure. 展开更多
关键词 steel frames-reinforced concrete wall mixed structure continuum analytial approach inter-story drift stiffness semirigid connection second order effect.
下载PDF
上一页 1 2 5 下一页 到第
使用帮助 返回顶部