The effect of ground steel-making slag on microstructure and composition of hydration products of ordinary Portland cement (OPC) was investigated by mercury intrusion porosimetry (MIP),X-ray diffraction (XRD) and diff...The effect of ground steel-making slag on microstructure and composition of hydration products of ordinary Portland cement (OPC) was investigated by mercury intrusion porosimetry (MIP),X-ray diffraction (XRD) and differential thermal analysis (DTA).Results show that ground steel-making slag is a kind of high activity mineral additives and it can raise the longer-age strength of OPC mortar.The total porosity and average pore diameter of OPC paste with ground steel-making slag increase with the increase of the amount of ground steel-making slag replacing OPC at various ages,while after 28 days most pores in OPC paste with ground steel-making slag do not influence the strength because the diameter of those pores is in the rang of 20 to 50nm.The hydration mechanism of ground steel-making slag is similar to that of OPC but different from that of fly ash and blast furnace slag.The hydration products of ground steel-making slag contain quite a lot of Ca(OH) 2 in long age.展开更多
To research the possibility of steel-making dust as a kind of mineral filler in asphalt mixture, two steel-making dusts and one ordinary mineral filler were adopted. The specific density, specific surface area, finene...To research the possibility of steel-making dust as a kind of mineral filler in asphalt mixture, two steel-making dusts and one ordinary mineral filler were adopted. The specific density, specific surface area, fineness modulus and mineralogy component of the dusts were tested. Scanning electron microscopy(SEM) was carried out to research the microstructure of the dusts; dynamic shear rheological(DSR) test and time sweep test were used to research the high temperature and fatigue performance of asphalt mortars containing steel-making dust. The experimental results indicate that, compared with ordinary mineral filler, steel-making dusts have more active ingredients, difference surface characteristics and micro-structure. Furthermore, the high temperature and fatigue performance of steel-making dusts corresponding asphalt mortars are superior to those of reference group. Therefore, the steel-making dust would be an alternative to the ordinary mineral filler to improve the performance of asphalt mortars and reduce the harm of the dusts to the environment at the same time.展开更多
Steel-making and continuous/ingot casting are the key processes of modern iron and steel enterprises. Bilevel programming problems(BLPPs) are the optimization problems with hierarchical structure. In steel-making prod...Steel-making and continuous/ingot casting are the key processes of modern iron and steel enterprises. Bilevel programming problems(BLPPs) are the optimization problems with hierarchical structure. In steel-making production, the plan is not only decided by the steel-making scheduling, but also by the transportation equipment.This paper proposes a genetic algorithm to solve continuous and ingot casting scheduling problems. Based on the characteristics of the problems involved, a genetic algorithm is proposed for solving the bilevel programming problem in steel-making production. Furthermore, based on the simplex method, a new crossover operator is designed to improve the efficiency of the genetic algorithm. Finally, the convergence is analyzed. Using actual data the validity of the proposed algorithm is proved and the application results in the steel plant are analyzed.展开更多
Based on the refractories research of Baosteel, the demands for refractories from the developing steel-making technology as high security, high efficiency, energy saving and environment .friendly are introduced.
The use of steel-making slag as catalysts for microwave-assisted dry reforming of CH4 was studied. Two carbon materials (an activated carbon and a metallurgical coke), mixtures of the carbon materials and Fe-rich slag...The use of steel-making slag as catalysts for microwave-assisted dry reforming of CH4 was studied. Two carbon materials (an activated carbon and a metallurgical coke), mixtures of the carbon materials and Fe-rich slag, and mixtures of the carbon materials and Ni/Al2O3 were tested as catalysts. The mixtures of slag with carbons gave rise to higher and steadier conversions than those achieved over the carbon materials alone. In addition, the use of the metallurgical coke mixed with metal-rich catalysts gave rise to remarkable results. Thus, no CH4 and CO2 conversions were achieved when coke was used alone, whereas high conversions were obtained when it was mixed with the metal-rich catalysts.展开更多
In order to meet the requirement of semi-steel making, the original nozzle was optimized by Vanadium-recoverying and Stee1-making Works of Pangang. And then every parameters of the oxygen lance were assessed according...In order to meet the requirement of semi-steel making, the original nozzle was optimized by Vanadium-recoverying and Stee1-making Works of Pangang. And then every parameters of the oxygen lance were assessed according to industrial tests. Results show that, comparing with the original oxygen lance nozzle the new designed one has a better metallurgical effect, the average volume of oxygen and oxygen supply intensity were increased by 774m3/h and 0.19 m3/(t·min) respectively, oxygen consumption was reduced by 1.87m3/t, the blowing time was lowered by 56 seconds, a better dephosphorization effect was obtained by the new one.展开更多
文摘The effect of ground steel-making slag on microstructure and composition of hydration products of ordinary Portland cement (OPC) was investigated by mercury intrusion porosimetry (MIP),X-ray diffraction (XRD) and differential thermal analysis (DTA).Results show that ground steel-making slag is a kind of high activity mineral additives and it can raise the longer-age strength of OPC mortar.The total porosity and average pore diameter of OPC paste with ground steel-making slag increase with the increase of the amount of ground steel-making slag replacing OPC at various ages,while after 28 days most pores in OPC paste with ground steel-making slag do not influence the strength because the diameter of those pores is in the rang of 20 to 50nm.The hydration mechanism of ground steel-making slag is similar to that of OPC but different from that of fly ash and blast furnace slag.The hydration products of ground steel-making slag contain quite a lot of Ca(OH) 2 in long age.
基金Funded by the National Natural Science Foundation of China(51778482)
文摘To research the possibility of steel-making dust as a kind of mineral filler in asphalt mixture, two steel-making dusts and one ordinary mineral filler were adopted. The specific density, specific surface area, fineness modulus and mineralogy component of the dusts were tested. Scanning electron microscopy(SEM) was carried out to research the microstructure of the dusts; dynamic shear rheological(DSR) test and time sweep test were used to research the high temperature and fatigue performance of asphalt mortars containing steel-making dust. The experimental results indicate that, compared with ordinary mineral filler, steel-making dusts have more active ingredients, difference surface characteristics and micro-structure. Furthermore, the high temperature and fatigue performance of steel-making dusts corresponding asphalt mortars are superior to those of reference group. Therefore, the steel-making dust would be an alternative to the ordinary mineral filler to improve the performance of asphalt mortars and reduce the harm of the dusts to the environment at the same time.
基金Supported by the Educational Commission of Liaoning Province Science and Technology Research Projects(L2013237)
文摘Steel-making and continuous/ingot casting are the key processes of modern iron and steel enterprises. Bilevel programming problems(BLPPs) are the optimization problems with hierarchical structure. In steel-making production, the plan is not only decided by the steel-making scheduling, but also by the transportation equipment.This paper proposes a genetic algorithm to solve continuous and ingot casting scheduling problems. Based on the characteristics of the problems involved, a genetic algorithm is proposed for solving the bilevel programming problem in steel-making production. Furthermore, based on the simplex method, a new crossover operator is designed to improve the efficiency of the genetic algorithm. Finally, the convergence is analyzed. Using actual data the validity of the proposed algorithm is proved and the application results in the steel plant are analyzed.
文摘Based on the refractories research of Baosteel, the demands for refractories from the developing steel-making technology as high security, high efficiency, energy saving and environment .friendly are introduced.
基金supported by MICINN-Spain under the Project IPT-2011-0739-920000
文摘The use of steel-making slag as catalysts for microwave-assisted dry reforming of CH4 was studied. Two carbon materials (an activated carbon and a metallurgical coke), mixtures of the carbon materials and Fe-rich slag, and mixtures of the carbon materials and Ni/Al2O3 were tested as catalysts. The mixtures of slag with carbons gave rise to higher and steadier conversions than those achieved over the carbon materials alone. In addition, the use of the metallurgical coke mixed with metal-rich catalysts gave rise to remarkable results. Thus, no CH4 and CO2 conversions were achieved when coke was used alone, whereas high conversions were obtained when it was mixed with the metal-rich catalysts.
文摘In order to meet the requirement of semi-steel making, the original nozzle was optimized by Vanadium-recoverying and Stee1-making Works of Pangang. And then every parameters of the oxygen lance were assessed according to industrial tests. Results show that, comparing with the original oxygen lance nozzle the new designed one has a better metallurgical effect, the average volume of oxygen and oxygen supply intensity were increased by 774m3/h and 0.19 m3/(t·min) respectively, oxygen consumption was reduced by 1.87m3/t, the blowing time was lowered by 56 seconds, a better dephosphorization effect was obtained by the new one.
