The presence of waste tires poses an environmental challenge as they occupy a significant amount of land and are expensive to dispose in landfills.However,reusing waste tires can address this issue when waste tires ar...The presence of waste tires poses an environmental challenge as they occupy a significant amount of land and are expensive to dispose in landfills.However,reusing waste tires can address this issue when waste tires are used in geotechnical applications.To determine the viability of this approach,laboratoryscale tests were conducted to investigate load-bearing capacity of circular footings on sand-tire shred(STS)mixtures with shredded waste tire contents of 5%e15%by weight and three different widths of shreds.The investigation focused on analyzing the thickness of layers composed of STS mixtures,the soil cap,and the impact of geogrids on bearing capacity.The results indicate that a specific mixture of sand and tire shreds provides the highest footing-bearing capacity.In addition,the optimal shred content and size were found to be 10%by weight and 2 cm×10 cm,respectively.Furthermore,for a given tire shred width,a particular length provides the largest bearing capacity.The results agree well with that of previous research conducted by the first author and his colleagues in direct shear and California bearing ratio(CBR)tests.The primary finding of this research is that the use of two-layered STS mixtures reinforced by geogrids significantly enhances the bearing capacity.展开更多
In order to delay or eliminate the occurrence and expansion of the reflective cracking in the asphalt concrete overlay on old cement concrete pavement, an epoxy asphalt geogrid stress-absorbing layer（ EAGSAL） was de...In order to delay or eliminate the occurrence and expansion of the reflective cracking in the asphalt concrete overlay on old cement concrete pavement, an epoxy asphalt geogrid stress-absorbing layer（ EAGSAL） was designed. The EAGSAL consists of epoxy asphalt and fiberglass geogrid. The pull-out test, skewshearing test, bending beam test and fatigue test were conducted to evaluate the performance of the EAGSAL and a traditional stress-absorbing layer（ TSAL）. The results showthat the adhesive performance, shear performance, bending strength and fatigue performance of the EAGSAL with an optimal spraying volume of epoxy asphalt are better than those of optimally designed TSAL, and the maximum bending strain of the EAGSAL is very close to that of the TSAL. The EAGSAL has superior performance in reflective cracking resistance.Moreover, the EAGSAL with the optimal spraying volume of approximately 2. 0 L m^2 is thinner and lighter than the TSAL,which can decrease the thickness and improve the bearing ability of the whole pavement structure.展开更多
文摘The presence of waste tires poses an environmental challenge as they occupy a significant amount of land and are expensive to dispose in landfills.However,reusing waste tires can address this issue when waste tires are used in geotechnical applications.To determine the viability of this approach,laboratoryscale tests were conducted to investigate load-bearing capacity of circular footings on sand-tire shred(STS)mixtures with shredded waste tire contents of 5%e15%by weight and three different widths of shreds.The investigation focused on analyzing the thickness of layers composed of STS mixtures,the soil cap,and the impact of geogrids on bearing capacity.The results indicate that a specific mixture of sand and tire shreds provides the highest footing-bearing capacity.In addition,the optimal shred content and size were found to be 10%by weight and 2 cm×10 cm,respectively.Furthermore,for a given tire shred width,a particular length provides the largest bearing capacity.The results agree well with that of previous research conducted by the first author and his colleagues in direct shear and California bearing ratio(CBR)tests.The primary finding of this research is that the use of two-layered STS mixtures reinforced by geogrids significantly enhances the bearing capacity.
基金The National Natural Science Foundation of China(No.51178114,51378122)
文摘In order to delay or eliminate the occurrence and expansion of the reflective cracking in the asphalt concrete overlay on old cement concrete pavement, an epoxy asphalt geogrid stress-absorbing layer（ EAGSAL） was designed. The EAGSAL consists of epoxy asphalt and fiberglass geogrid. The pull-out test, skewshearing test, bending beam test and fatigue test were conducted to evaluate the performance of the EAGSAL and a traditional stress-absorbing layer（ TSAL）. The results showthat the adhesive performance, shear performance, bending strength and fatigue performance of the EAGSAL with an optimal spraying volume of epoxy asphalt are better than those of optimally designed TSAL, and the maximum bending strain of the EAGSAL is very close to that of the TSAL. The EAGSAL has superior performance in reflective cracking resistance.Moreover, the EAGSAL with the optimal spraying volume of approximately 2. 0 L m^2 is thinner and lighter than the TSAL,which can decrease the thickness and improve the bearing ability of the whole pavement structure.
