Commercial coal production in the southern region of Brazil (comprising the Paraná, Santa Catarina, and Rio Grande do Sul states) has been occurring since the beginning of the twentieth century. Regarding the San...Commercial coal production in the southern region of Brazil (comprising the Paraná, Santa Catarina, and Rio Grande do Sul states) has been occurring since the beginning of the twentieth century. Regarding the Santa Catarina coalfields, about 60% - 65% of the ROM coal is discharged at dump deposits as waste. These wastes can lead to the formation of acid mine drainage (AMD), a source of ground and surface water pollution. One of the technologies used for preventing AMD consists of the alkaline additive method. Thus, the aim of this work was to study, at laboratory scale, the DAM control by blending coal waste with a metallurgical slag. A coal-tailing sample was collected from a coal mine, and the slag was obtained from a semi-integrated steel plant. Static tests were carried out by the acid-base account method to determine the balance between the acid-producing and acid-consuming (neutralizing) mineral components of the samples. Kinetic tests were conducted in humidity cells, following the ASTM D 5744-96 method, for a period of 80 weeks. The results showed that the coal tailing generates AMD. However, environmental problems can be minimized by mixing the coal waste with the metallurgical slag in 1:1 or 1:1.5 proportions. The kinetic experiments proved that, in this condition, the lixiviation presents a higher pH and a lower concentration of acidity, metals, and sulfate. Finally, it is possible to conclude that the blending slag in coal tailing deposits can be a viable alternative for DAM control in coal mining.展开更多
A numerical simulation was performed to study the flow pattern,mixing time and open-eye slag produced by argon gas injection in an industrial scale steel ladle under non-isothermal conditions.The liquid steel remains ...A numerical simulation was performed to study the flow pattern,mixing time and open-eye slag produced by argon gas injection in an industrial scale steel ladle under non-isothermal conditions.The liquid steel remains 5min before the injection,and thermal stratification and convective flows were analyzed.Three different sequences in stages employing various argon-gas flow rates were simulated.In the first case,a sequence with the highest flow rates of argon was applied,while in the second and the third sequences,the intermediate and the lowest flow rates of argon gas were used,respectively.For determining the chemistry homogenization,the mixing time was computed and analyzed in all three cases.It was found that the cold steel is located near the walls while the steel with a high temperature is accumulated in the center of the ladle above the argon-gas tuyere.The higher and lower flows promote a faster chemistry homogenization owing to the secondary recirculations that are developed closer to the walls.The results from steel temperature drop show a good concordance with plant trial measurements.展开更多
文摘Commercial coal production in the southern region of Brazil (comprising the Paraná, Santa Catarina, and Rio Grande do Sul states) has been occurring since the beginning of the twentieth century. Regarding the Santa Catarina coalfields, about 60% - 65% of the ROM coal is discharged at dump deposits as waste. These wastes can lead to the formation of acid mine drainage (AMD), a source of ground and surface water pollution. One of the technologies used for preventing AMD consists of the alkaline additive method. Thus, the aim of this work was to study, at laboratory scale, the DAM control by blending coal waste with a metallurgical slag. A coal-tailing sample was collected from a coal mine, and the slag was obtained from a semi-integrated steel plant. Static tests were carried out by the acid-base account method to determine the balance between the acid-producing and acid-consuming (neutralizing) mineral components of the samples. Kinetic tests were conducted in humidity cells, following the ASTM D 5744-96 method, for a period of 80 weeks. The results showed that the coal tailing generates AMD. However, environmental problems can be minimized by mixing the coal waste with the metallurgical slag in 1:1 or 1:1.5 proportions. The kinetic experiments proved that, in this condition, the lixiviation presents a higher pH and a lower concentration of acidity, metals, and sulfate. Finally, it is possible to conclude that the blending slag in coal tailing deposits can be a viable alternative for DAM control in coal mining.
文摘A numerical simulation was performed to study the flow pattern,mixing time and open-eye slag produced by argon gas injection in an industrial scale steel ladle under non-isothermal conditions.The liquid steel remains 5min before the injection,and thermal stratification and convective flows were analyzed.Three different sequences in stages employing various argon-gas flow rates were simulated.In the first case,a sequence with the highest flow rates of argon was applied,while in the second and the third sequences,the intermediate and the lowest flow rates of argon gas were used,respectively.For determining the chemistry homogenization,the mixing time was computed and analyzed in all three cases.It was found that the cold steel is located near the walls while the steel with a high temperature is accumulated in the center of the ladle above the argon-gas tuyere.The higher and lower flows promote a faster chemistry homogenization owing to the secondary recirculations that are developed closer to the walls.The results from steel temperature drop show a good concordance with plant trial measurements.
