ZrO2 dispersion-strengthened Q345 steel with different ZrO2 contents（0%, 0.5% and 1.2%, mass fraction） was fabricated through combining middle frequency induction furnace melting and cored-wire injection technologie...ZrO2 dispersion-strengthened Q345 steel with different ZrO2 contents（0%, 0.5% and 1.2%, mass fraction） was fabricated through combining middle frequency induction furnace melting and cored-wire injection technologies. The microstructure and fracture surface morphology of ZrO2 dispersion-strengthened Q345 steel in casting, normalizing and quenching states were observed using optical microscopy, scanning electron microscopy and transmission electron microscopy. Also, strengthening and fracture mechanisms of the alloys were analyzed. Results showed that the dispersed ZrO2 particles added into Q345 matrix significantly enhanced its strength, and the main strengthening mechanism was the formation of dislocation cells and pinning effect caused by the addition of ZrO2 particles. Apart from that, the hard martensite phase, grain refinement and high ZrO2 particles content also played important roles in strengthening effect. Furthermore, the nanoindentation was also performed to further reveal the strengthening effect and mechanism of dispersed ZrO2 particles in Q345 steel. Results showed that the hardness of ZrO2 dispersion-strengthened Q345 steel increased with the increase of ZrO2 content.展开更多
Because of its advantages of light weight, high strength and convenient construction, steel structure has gradually become the first choice for large-span and high-rise structures. The use of high strength steel in bu...Because of its advantages of light weight, high strength and convenient construction, steel structure has gradually become the first choice for large-span and high-rise structures. The use of high strength steel in building engineering can reduce the section size of components and the weight of the structure, thus increasing the building area. But steel is not fire-resistant, when the temperature reaches 600<span style="white-space:nowrap;">°</span>C, steel loses most of the stiffness and strength. Therefore, it is of great significance to study the fire resistance of steel structures, and the mechanical properties of steel structures at high temperature are the foundation of the fire resistance research. The mechanical properties of steel after high temperature are the basis for the safety assessment of steel structure after fire. Therefore, this paper studies the mechanical properties of Q345 steel after high temperature cooling.展开更多
Through the static tensile test of Q690 high-strength steel, the relevant mechanical parameters are obtained and the maximum fatigue load is determined. The fatigue life is measured by the fatigue test under the load....Through the static tensile test of Q690 high-strength steel, the relevant mechanical parameters are obtained and the maximum fatigue load is determined. The fatigue life is measured by the fatigue test under the load. According to the fatigue cumulative damage method, the number of fatigue pre-damage vibration is designed in proportion. Then the fatigue pre-damage test is carried out on the high-strength steel, the stress-strain curve and the variation of residual mechanical property reduction coefficient with fatigue damage were drawn. The results show that: compared with the undamaged specimens, the yield strength and tensile strength of Q690 steel are less affected by fatigue damage, but the elongation changes more significantly, and the elastic modulus is not significantly affected. Finally, through the change of mechanical properties of Q690 high-strength steel with different fatigue damage, it provides a scientific basis for the performance evaluation of existing Q690 high-strength steel structure after fatigue damage.展开更多
The effects of TMCP parameters, consisting of finish cooling temperature and start rolling temperature in non-recrystallization region, on the final microstructure and mechanical properties of Q460 qNH steel were stud...The effects of TMCP parameters, consisting of finish cooling temperature and start rolling temperature in non-recrystallization region, on the final microstructure and mechanical properties of Q460 qNH steel were studied by tensile, Charpy impact tests and optical microscopy. The TMCP parameters for Q460 qNH steel were optimized by laboratory experiments. The results show that the yield strength and tensile strength increase with the finish cooling temperature, and the microstructure of Q460 qNH steel consists of ferrite and granular bainite.展开更多
Both microstrueture and mechanical properties of low alloy steels treated by quenching and partitioning （Q＆P） process were examined. The mixed microstructure of martensite and large-fractioned retained austenite （...Both microstrueture and mechanical properties of low alloy steels treated by quenching and partitioning （Q＆P） process were examined. The mixed microstructure of martensite and large-fractioned retained austenite （about 27.3%） was characterized and analyzed, excellent combinations of total elongation of 19% and tensile strength of 1 835 MPa were obtained, and three-stage work hardening behavior was demonstrated during tensile test. The en hanced mechanical properties and work hardening behavior were explained based on the transformation induced plas ticity effect of large fractioned austenite.展开更多
A new ferritic creep resistant steel has been developed by eliminating Nb and adding 1.5 mass % Re to a ferritic steel grade T/P23 with the aim of enhancing its mechanical properties at high temperature.Cast ingots of...A new ferritic creep resistant steel has been developed by eliminating Nb and adding 1.5 mass % Re to a ferritic steel grade T/P23 with the aim of enhancing its mechanical properties at high temperature.Cast ingots of both steels, new grade and ASTM T/P 23, were hot rolled at 900℃ and then submitted to a thermal treatment consisting of solubilization at 1050℃ and tempering at 700℃. Tempered bainitic microstructures obtained contain second phases reinforcing carbide particles, mainly M_6C and M_（23）C_6 at the boundaries of both, prior austenite grains and bainitic ferrite laths, as well as MC within the grains. Mechanical properties at temperatures ranging from 540 to 600℃ were studied by strain-ratechange tests in compression at strain rates between 10^（-7） and 10^（-4）s^（-1）. These tests showed high stress exponents（n ≥ 20） and activation energies（Q ≈ 400 k J/mol） for both alloys, which were associated with a dislocation movement mechanism with a strong interaction between dislocations and precipitates. On the other hand, a creep exponent of 5 was derived for the stress dependence of minimum creep rate from conventional-type creep tests at 600℃. Although this stress exponent is usually related to a dislocation climb controlled creep mechanism, remarkable microstructural degradation observed with increasing creep time makes difficult to elucidate the true deformation mechanism controlling creep.展开更多
The characteristics of microstructure, mechanical property and corrosion behavior of Cr26Mo3.5 super stainless steel joints by pulse tungsten inert gas(P-TIG)welding and laser welding were investigated. The results in...The characteristics of microstructure, mechanical property and corrosion behavior of Cr26Mo3.5 super stainless steel joints by pulse tungsten inert gas(P-TIG)welding and laser welding were investigated. The results indicate that the widths of the center equiaxed grain zone(EGZ)and the columnar grain zone(CGZ)increase with the increase of heat input in both welding processes. The precipitates of Nb and Ti carbides and nitrides are formed in the weld metal(WM)and the heat affected zone(HAZ). The joints by laser welding show better tensile and corrosion resistance properties than those by P-TIG welding due to the heat concentration and lower heat input. The tensile strength and elongation increase with the decrease of heat input, and the fracture mode of the joints turns into ductile-brittle mixed fracture from ductile fracture when the welding method turns into P-TIG welding from laser welding. Moreover, the corrosion resistance of all joints declines slightly with the increase of heat input. Hence, laser welding is more suitable for welding Cr26Mo3.5 super stainless steel in engineering applications.展开更多
With tensile test, impact test, and optical microscopy, the effect of thermomechanical controlled processing （TMCP） parameters on the microstructure and properties of Q460 steel was studied and analyzed. The TMCP pa...With tensile test, impact test, and optical microscopy, the effect of thermomechanical controlled processing （TMCP） parameters on the microstructure and properties of Q460 steel was studied and analyzed. The TMCP parameters for Q460q steel were optimized by laboratory experiments, and then, industrial trial was carried out. The result indicated that the microstructure and properties of the Q460q steel in industrial trial were in agreement with the results obtained in laboratory experiments and could meet the national standard of Q460q steel.展开更多
Quenching and Partitioning (Q&P) steel is a new type ultrahigh strength steel with transformation induced plasticity (TRIP) effect. Uniaxial tensile experiments of the Q&P steel at room temperature were carrie...Quenching and Partitioning (Q&P) steel is a new type ultrahigh strength steel with transformation induced plasticity (TRIP) effect. Uniaxial tensile experiments of the Q&P steel at room temperature were carried out to investigate the effects of sampling angle and strain rate on its mechanical properties. Experimental results show that the flow stress-strain curve, the hardening component n, the anisotropy coefficient through thickness r and the elongation of the Q&P steel are not sensitive to the sampling angle. However, the hardening component n and the elongation of the Q&P steel decrease with increasing the strain rate. Due to the Q&P steel with TRIP effect, when the strain rate greater, the deformation work will transform to the internal energy of specimen, and the TRIP effect of the Q&P steel will be inhibited, which results in less transformed retained austenite. X ray diffraction experiments were performed to verify it.展开更多
基金Projects(51671166,51434008)supported by the National Natural Science Foundation of ChinaProject(2013CB733000)supported by the National Basic Research Program of China
文摘ZrO2 dispersion-strengthened Q345 steel with different ZrO2 contents（0%, 0.5% and 1.2%, mass fraction） was fabricated through combining middle frequency induction furnace melting and cored-wire injection technologies. The microstructure and fracture surface morphology of ZrO2 dispersion-strengthened Q345 steel in casting, normalizing and quenching states were observed using optical microscopy, scanning electron microscopy and transmission electron microscopy. Also, strengthening and fracture mechanisms of the alloys were analyzed. Results showed that the dispersed ZrO2 particles added into Q345 matrix significantly enhanced its strength, and the main strengthening mechanism was the formation of dislocation cells and pinning effect caused by the addition of ZrO2 particles. Apart from that, the hard martensite phase, grain refinement and high ZrO2 particles content also played important roles in strengthening effect. Furthermore, the nanoindentation was also performed to further reveal the strengthening effect and mechanism of dispersed ZrO2 particles in Q345 steel. Results showed that the hardness of ZrO2 dispersion-strengthened Q345 steel increased with the increase of ZrO2 content.
文摘Because of its advantages of light weight, high strength and convenient construction, steel structure has gradually become the first choice for large-span and high-rise structures. The use of high strength steel in building engineering can reduce the section size of components and the weight of the structure, thus increasing the building area. But steel is not fire-resistant, when the temperature reaches 600<span style="white-space:nowrap;">°</span>C, steel loses most of the stiffness and strength. Therefore, it is of great significance to study the fire resistance of steel structures, and the mechanical properties of steel structures at high temperature are the foundation of the fire resistance research. The mechanical properties of steel after high temperature are the basis for the safety assessment of steel structure after fire. Therefore, this paper studies the mechanical properties of Q345 steel after high temperature cooling.
文摘Through the static tensile test of Q690 high-strength steel, the relevant mechanical parameters are obtained and the maximum fatigue load is determined. The fatigue life is measured by the fatigue test under the load. According to the fatigue cumulative damage method, the number of fatigue pre-damage vibration is designed in proportion. Then the fatigue pre-damage test is carried out on the high-strength steel, the stress-strain curve and the variation of residual mechanical property reduction coefficient with fatigue damage were drawn. The results show that: compared with the undamaged specimens, the yield strength and tensile strength of Q690 steel are less affected by fatigue damage, but the elongation changes more significantly, and the elastic modulus is not significantly affected. Finally, through the change of mechanical properties of Q690 high-strength steel with different fatigue damage, it provides a scientific basis for the performance evaluation of existing Q690 high-strength steel structure after fatigue damage.
基金Funded by the Hi-Tech Research and Development Program of China(2003AA33G010)
文摘The effects of TMCP parameters, consisting of finish cooling temperature and start rolling temperature in non-recrystallization region, on the final microstructure and mechanical properties of Q460 qNH steel were studied by tensile, Charpy impact tests and optical microscopy. The TMCP parameters for Q460 qNH steel were optimized by laboratory experiments. The results show that the yield strength and tensile strength increase with the finish cooling temperature, and the microstructure of Q460 qNH steel consists of ferrite and granular bainite.
基金Item Sponsored by Youth Science Funds of China(51101036)National Basic Research Program of China(2010CB630803)National Key Technology Support Program of China(2013BAE07B05)
文摘Both microstrueture and mechanical properties of low alloy steels treated by quenching and partitioning （Q＆P） process were examined. The mixed microstructure of martensite and large-fractioned retained austenite （about 27.3%） was characterized and analyzed, excellent combinations of total elongation of 19% and tensile strength of 1 835 MPa were obtained, and three-stage work hardening behavior was demonstrated during tensile test. The en hanced mechanical properties and work hardening behavior were explained based on the transformation induced plas ticity effect of large fractioned austenite.
基金supported by the Spanish Ministry of Economy and Competitiveness(MINECO)under Grant MAT2012-39124,MAT2015-68919,and MAT2016-80875
文摘A new ferritic creep resistant steel has been developed by eliminating Nb and adding 1.5 mass % Re to a ferritic steel grade T/P23 with the aim of enhancing its mechanical properties at high temperature.Cast ingots of both steels, new grade and ASTM T/P 23, were hot rolled at 900℃ and then submitted to a thermal treatment consisting of solubilization at 1050℃ and tempering at 700℃. Tempered bainitic microstructures obtained contain second phases reinforcing carbide particles, mainly M_6C and M_（23）C_6 at the boundaries of both, prior austenite grains and bainitic ferrite laths, as well as MC within the grains. Mechanical properties at temperatures ranging from 540 to 600℃ were studied by strain-ratechange tests in compression at strain rates between 10^（-7） and 10^（-4）s^（-1）. These tests showed high stress exponents（n ≥ 20） and activation energies（Q ≈ 400 k J/mol） for both alloys, which were associated with a dislocation movement mechanism with a strong interaction between dislocations and precipitates. On the other hand, a creep exponent of 5 was derived for the stress dependence of minimum creep rate from conventional-type creep tests at 600℃. Although this stress exponent is usually related to a dislocation climb controlled creep mechanism, remarkable microstructural degradation observed with increasing creep time makes difficult to elucidate the true deformation mechanism controlling creep.
基金Supported by the Research Institute,Baoshan Iron&Steel Co.,Ltd
文摘The characteristics of microstructure, mechanical property and corrosion behavior of Cr26Mo3.5 super stainless steel joints by pulse tungsten inert gas(P-TIG)welding and laser welding were investigated. The results indicate that the widths of the center equiaxed grain zone(EGZ)and the columnar grain zone(CGZ)increase with the increase of heat input in both welding processes. The precipitates of Nb and Ti carbides and nitrides are formed in the weld metal(WM)and the heat affected zone(HAZ). The joints by laser welding show better tensile and corrosion resistance properties than those by P-TIG welding due to the heat concentration and lower heat input. The tensile strength and elongation increase with the decrease of heat input, and the fracture mode of the joints turns into ductile-brittle mixed fracture from ductile fracture when the welding method turns into P-TIG welding from laser welding. Moreover, the corrosion resistance of all joints declines slightly with the increase of heat input. Hence, laser welding is more suitable for welding Cr26Mo3.5 super stainless steel in engineering applications.
基金Item Sponsored by Hi-Tech Research and Development Program of China (2003AA33G010)
文摘With tensile test, impact test, and optical microscopy, the effect of thermomechanical controlled processing （TMCP） parameters on the microstructure and properties of Q460 steel was studied and analyzed. The TMCP parameters for Q460q steel were optimized by laboratory experiments, and then, industrial trial was carried out. The result indicated that the microstructure and properties of the Q460q steel in industrial trial were in agreement with the results obtained in laboratory experiments and could meet the national standard of Q460q steel.
文摘Quenching and Partitioning (Q&P) steel is a new type ultrahigh strength steel with transformation induced plasticity (TRIP) effect. Uniaxial tensile experiments of the Q&P steel at room temperature were carried out to investigate the effects of sampling angle and strain rate on its mechanical properties. Experimental results show that the flow stress-strain curve, the hardening component n, the anisotropy coefficient through thickness r and the elongation of the Q&P steel are not sensitive to the sampling angle. However, the hardening component n and the elongation of the Q&P steel decrease with increasing the strain rate. Due to the Q&P steel with TRIP effect, when the strain rate greater, the deformation work will transform to the internal energy of specimen, and the TRIP effect of the Q&P steel will be inhibited, which results in less transformed retained austenite. X ray diffraction experiments were performed to verify it.
