Research on Vehicle Control Technology Using Four-Wheel Independent Steering System

The enhancement of vehicle handling stability and maneuverability through active and independent rear wheels control is presented. Firstly, the configuration of four-wheel independent steering prototype vehide is introduced briefly. Then the concrete overall design of the electronic controllers of four wheel independent steering system （4WIS） is formulated in details. Under the control strategy of zero sideslip angle at mass center, the mathematical model of 4WIS is established to deduce the equations of separated rear wheel steering angles. According to these equations, simulation analysis for 4WIS vehicle performances is finished to show that 4WIS vehicle can improve the maneuverability greatly at low speed and increase the handling stability at high speed. Finally, the road test of 4WIS vehide has performed to verify the correctness of simulation and show that compared with the conventional four wheel steering （4WS） vehicle, the 4WIS vehicle not only improves the kinematical harmony but also decreases steering resistance and lighten abrasion of tires.

Dynamic characteristics of hydraulic power steering system with accumulator in load-haul-dump vehicle

Using hydraulic power steering system of model EIMCO 922 load-haul-dump vehicle as a simulation example, the dynamic characteristics of hydraulic power steering system in load-haul-dump vehicle were simulated and discussed with SIMULINK software and hydraulic control theory. The results show that the dynamic characteristics of hydraulic power steering system are improved obviously by using bladder accumulator, the hydraulic power steering system of model EIMCO 922 load-haul-dump vehicle generates vibration at the initial stage under the normal steering condition of pulse input, and its static response time is 0.25 s shorter than that without bladder accumulator. Under the normal steering working condition, the capacity of steering accumulator for absorbing pulse is directly proportional to the cross section area of connecting pipeline, and inversely proportional to the length of connecting pipeline. At the same time, the precharge pressure of nitrogen in steering accumulator should be 60%80% of the rated minimum working pressure of hydraulic power steering system. Under the abnormal steering working condition, the steering cylinder piston may obtain higher motion velocity, and the dynamic response velocity of hydraulic power steering system can be increased by reducing the pressure drop of hydraulic pipelines between the accumulator and steering cylinder and by increasing the rated pressure of hydraulic power steering system, but the dynamic characteristics of hydraulic power steering system in load-haul-dump vehicle have nothing to do with the precharge pressure of nitrogen in steering accumulator.

Influence of Novel Redirector with Bypass Damping on the Performance of Load-Sensing Steering System

Load-sensing steering systems for articulated loaders are prone to large pressure shocks and oscillations during steering operations,affecting the system stability.An optimized structure of the redirector with bypass damping is proposed to improve this phenomenon.In this structure,orifices and throttle grooves are added to the traditional redirector.To control the steering load and working conditions,the steering load of the loader is replaced by a pressure regulating valve.Simulation and experimental results reveal that the redirector with bypass damping has better load-sensing characteristics than the traditional redirector.The peak output pressure shock caused by the load unit step signal decreases from 6.50 to 5.64 MPa,which means the pressure oscillation of the hydraulic system is reduced by 13.4%.The pressure fluctuation time can be reduced from 2.09 to 1.6 s,with a decrease rate of 23.4%.The output pressure oscillation decays swiftly,and the smoothness of the steering operation is improved significantly.

Mechanical-Hydraulic Co-Simulation of Full Hydraulic Articulated Steering System

With the development and improvement of the hydraulic steering system,the articulated steering system became the research focus of numerous domestic and foreign scholars.The full hydraulic steering system with a compact structure and ease of operation,is widely used in articulated steering mode.Furthermore,its performance can directly impact the steering sensitivity and stability.This paper studies the working principle and actual structure of the priority valve and the steering control valve,which are very important.By setting up a mathematic model,the system’s load-sensing characteristics and the impact of steering control valve bypass throttle damping on steering stability can be analyzed.The Hydraulic Components Design(HCD)model was established for the hydraulic part of this system.It is proved that the model can reflect the system’s actual properties by comparing simulation and experimental results.The dynamic model is based on its actual prototype parameters by taking the tire and ground forces into account.The steering process’s dynamic characteristics are co-simulated in the 1D+3D system model by combining AMESim and Virtual.Lab Motion.The simulation results show that the system’s load-sensing characteristics ensure the sensitivity of the steering operation,and the bypass throttle damping has significantly improved the operation stability and lowered down the cylinder pressure fluctuations.This can improve the system performance by appropriate optimization.

Research on Energy Saving Technology of Load Sensitive Variable Steering System for Vehicles

In view of the large energy loss problem in the traditional full hydraulic steering system,a scheme of replacing the ordinary pump with the priority valve with the load sensitive variable pump is proposed to make the variable pump provide the corresponding flow rate according to the needs of the steering system to achieve the purpose of energy saving.Through the establishment of the system AMESim simulation model,the data comparison shows that the energy loss of the load sensitive variable steering system is significantly reduced relative to the traditional full hydraulic steering system.

Tracking Performance of Electric Power Steering System Based on the Mixed H_2/H_∞ Strategy

The tracking performance of motor current is an important factor that affects the assistance torque of electric power steering （EPS） system. Bad tracking performance will cause assistant torque delay, and make road feeling bad, and is influenced by the input steering torque and system measuring noise. However the existing methods have some shortages on system＇s robust dynamic performance and robust stability. The mixed H2/H∞ strategy for recirculating ball-type EPS system in a pure electric bus is proposed, and vehicle dynamic model of the system is established. Due to the existence of system model uncertainty, disturbance signals, sensor noises and the demand of system dynamic performance, the indexes of robust performance and road feeling for drivers are defined as the appraisal control objectives. The H∞ method is introduced to design the H∞ controller, and the H2 method is applied to optimize the H∞ controller, thus the mixed H2/H∞ controller is designed. The response of EPS system to the motor current command with amplitude of 20 A, the road disturbance with amplitude of 500 N and the sensor random noise with the amplitude of 1 A is simulated. The simulation results show that the recirculating ball-type EPS system with the mixed H2/H∞ controller can attenuate the random noises and disturbances and track the boost curve well, so the mixed H2/H∞ controller can improve the system＇s robust performance and dynamic performance. For the purpose of verifying the performance of the designed control strategy, the motor current tracking performance ground tests are conducted with step response input of the steering wheel, double-lane steering test and lemniscate steering test, respectively. The tests show that the mixed H2/H∞ controller for the recirculating ball-type EPS system of pure electric bus is feasible. The designed controller can solve the robust performance and robust stability of the system, thus improve the tracking performance of the EPS system and provide satisfied road feeling for the drivers.

Integration optimization of novel electric power steering system based on quality engineering theory

The dynamic model of a novel electric power steering （EPS） system integrated with active front steering function （the novel EPS system） is built. The concepts and quantitative expressions of the steering road feel, steering sensibility, and steering operation stability are introduced. Based on quality engineering theory, the optimization algorithm is proposed by integrating the Monte Carlo descriptive sampling, elitist non-dominated sorting genetic algorithm （NSGA-II） and 6-sigma design method. With the steering road feel and the steering portability as optimization targets, the system parameters are optimized by the proposed optimization algorithm. The simulation results show that the system optimized based on quality engineering theory can improve the steering road feel, guarantee steering stability and steering portability and thus provide a theoretical basis for the design and optimization of the novel electric power steering system.

Application of H infinite control to ship steering system

Because the general object of ship steering control system is singular, the state Of rudder force and the state of disturbance are separated, and the generalized yaw output disturhance is obtained. Furthermore, singular system control problem of ship yaw and sway coupled system is transferred into nonsingular standard control problem. Then according to the linear fractional denoting algorithm of the rational function parameter perturbation system, the Linear Fractional Transform （LFT） model of yaw and sway coupled motion is solved, which is used to design the ship steering robust control system. For the ship steering system with the uncertain parameters, the robust control law is designed based on H^∞ μ-synthesis. And the robust performance of the system is analyzed and the simulation validation is made. Simulation results show that the designed control system has excellent control effect and robustness.

Multi-objective optimization of active steering system with force and displacement coupled control

A novel active steering system with force and displacement coupled control(the novel AFS system) was introduced,which has functions of both the active steering and electric power steering.Based on the model of the novel AFS system and the vehicle three-degree of freedom system,the concept and quantitative formulas of the novel AFS system steering performance were proposed.The steering road feel and steering portability were set as the optimizing targets with the steering stability and steering portability as the constraint conditions.According to the features of constrained optimization of multi-variable function,a multi-variable genetic algorithm for the system parameter optimization was designed.The simulation results show that based on parametric optimization of the multi-objective genetic algorithm,the novel AFS system can improve the steering road feel,steering portability and steering stability,thus the optimization method can provide a theoretical basis for the design and optimization of the novel AFS system.

Controller Design for Electric Power Steering System Using T-S Fuzzy Model Approach

Pressure ripples in electric power steering （EPS） systems can be caused by the phase lag between the driver s steering torque and steer angle, the nonlinear frictions, and the disturbances from road and sensor noise especially during high-frequency maneuvers. This paper investigates the use of the robust fuzzy control method for actively reducing pressure ripples for EPS systems. Remarkable progress on steering maneuverability is achieved. The EPS dynamics is described with an eight-order nonlinear state-space model and approximated by a Takagi-Sugeno （T-S） fuzzy model with time-varying delays and external disturbances. A stabilization approach is then presented for nonlinear time-delay systems through fuzzy state feedback controller in parallel distributed compensation （PDC） structure. The closed-loop stability conditions of EPS system with the fuzzy controller are parameterized in terms of the linear matrix inequality （LMI） problem. Simulations and experiments using the proposed robust fuzzy controller and traditional PID controller have been carried out for EPS systems. Both the simulation and experiment results show that the proposed fuzzy controller can reduce the torque ripples and allow us to have a good steering feeling and stable driving.

Optimal design and applicability of electric power steering system for automotive platform

The ongoing need for better fuel economy and lower exhaust pollution of vehicles has increased the employment of electric power steering(EPS)in automotives.Optimal design of EPS for a product family reduces the development and fabrication costs significantly.In this paper,the TOPSIS method along with the NSGA-Ⅱis employed to find an optimum family of EPS for an automotive platform.A multi-objective optimization problem is defined considering road feel,steering portability,RMS of Ackerman error,and product family penalty function(PFPF)as the conflicting objective functions.The results for the single objective optimization problems and the ones for the multi-objective optimization problem,as well as two suggested trade-off design points are presented,compared and discussed.For the two suggested points,performance at one objective function is deteriorated by about 1%,while the commonality is increased by 20%–40%,which shows the effectiveness of the proposed method in first finding the non-dominated design points and then selecting the trade-off among the obtained points.The results indicate that the obtained trade-off points have superior performance within the product family with maximum number of common parts.

Model development and parameter investigation of a column-type electric power steering system

In this paper, the performance of a column-type electric power steering （EPS） system and vehicle has been studied and a detailed mathematical model for the system has been established. Based on the mathematic model of the optimization design for steering feel, the parameters of the EPS system and vehicle on steering performance have been investigated. Moreover, the effects of the parameters on system stability have been analyzed and compared by the method of absolute sensitivity and the results are given in the end.

Study on Characteristic of Electric Power Assist Steering System

A pinion-type electric power steering (EPS) equipped on a sedan is reached in this paper. A three-freedom dynamic model of this system is created. The variables affecting assist character is analyzed. The formulas of simpled steering resistance force and the relationship between assist gain and vehicle speed are presented for the first time. Assist character is found based on the parameters of a sedan at last. This assist character is fit for the control rule of the EPS system through analyzing this character. The assist character figure offers reference for system design and control. Furthermore, this research method has generality for assist character of different kinds of vehicles.

All-Electric Aircraft Nose Wheel Steering System with Two Worm Gears

As all-electric aircraft has many advantages,an aircraft nose wheel steering system would be developed to the all-electric direction.Concerning the control demand of the nose wheel steering system,based on the basic principles of nose wheel steering system and the design technique of mechanotronics,an all-electric aircraft nose wheel steering system,composed of a nose wheel steering mechanism of two worm gear and a control servo system of fly-by-wire with both steering and anti-shimmy functions is designed to meet the demand for operation control in the nose wheel steering system.Then,based on the LMS-AMESim software,the simulation model of the system is established to simulate the dynamics for the verification of its steering function.The simulation results indicate that the nose wheel steering system is reasonable,and can meet the requirements of the general project.Furthermore,the prototypes of the steering mechanism and control system are studied to validate the design,and the steering test bench is prepared to test the designed system.The test results,such as steer angle,rotate speed of motor are analyzed in details and compared with the theoretical results.The analysis and comparison results show that the design is reasonable and the property of the prototype can achieve the design objectives.

Multi-objective Optimization of Differential Steering System of Electric Vehicle with Motorized Wheels

A differential steering system is presented for electric vehicle with motorized wheels and a dynamic model of three-freedom car is built.Based on these models,the quantitative expressions of the road feel,sensitivity,and operation stability of the steering are derived.Then,according to the features of multi-constrained optimization of multi-objective function,a multi-island genetic algorithm(MIGA)is designed.Taking the road feel and the sensitivity of the steering as optimization objectives and the operation stability of the steering as a constraint,the system parameters are optimized.The simulation results show that the system optimized with MIGA can improve the steering road feel,and guarantee the operation stability and steering sensibility.

Mode Switching and Consistency Control for Electric-Hydraulic Hybrid Steering System

Electric-hydraulic hybrid power steering(E-HHPS)system,a novel device with multiple modes for commercial electric vehicles,is designed to realize both superior steering feel and high energy efficiency.However,inconsistent steering perfor-mance occurs in the mode-switching process due to different dynamic characteristics of electric and hydraulic components,which even threatens driving safety.In this paper,mode-switching strategy and dynamic compensation control method are proposed for the E-HHPS system to eliminate the inconsistency of steering feel,which comprehensively considers ideal assistance characteristics and energy consumption of the system.Then,the influence of disturbances on system stability is analyzed,and H_(∞)robust controller is employed to guarantee system robustness and stability.The experimental results dem-onstrate that the proposed strategy can provide a steering system with natural steering feel without apparent inconsistency and effectively minimize energy consumption.

Development of the electric automatic steering system for agricultural vehicles

Automatic guidance of agricultural vehicles requires automatic execution of operation commands received from the navigation controller by using electronically controlled mechanisms for wheel steering,speed changing and work implementing.Automatic steering contributes as a prerequisite technique in automatic and semi-automatic agricultural navigation.This research aimed to develop an electric automatic steering system that was compact in its structure and integrated into original steering mechanism in a simply and convenient way for aftermarket modification.A brushless motor and reducer assembly was utilized to provide an adequate steering torque instead of manual maneuver.A rapid assembling approach was proposed by passing the steering shaft through the hollow output shaft.A digital proportional-integral-differential(PID)algorithm was implemented to calculate the rotation speeds and directions by comparing the desired angle and the actual angle,which was implemented in a printed circuit board with a microcontroller unit(MCU)and interface chips.An unmanned wheeled tractor was applied as test platform to integrate the newly developed electric automatic steering system.Tests were conducted to evaluate its performance in terms of stability and responsiveness.An autonomous navigation system guided the tractor along target paths in the field by sending steering commands to the electric automatic steering system.The results show that the steering angle error was less than 0.81°when desired steering angle was less than 10°.The lateral error difference was no more than 4.76 cm when repeating following the same target path,which indicated that the electric automatic steering system responded accurately and robustly to steering commands.

Einstein-Podolsky-Rosen Steering and Nonlocality in Open Quantum Systems

We investigate the dynamical behavior of quantum steering (QS), Bell nonlocality, and entanglement in open quantum systems. We focus on a two-qubit system evolving within the framework of Kossakowski-type quantum dynamical semigroups. Our findings reveal that the measures of quantumness for the asymptotic states rely on the primary parameter of the quantum model. Furthermore, control over these measures can be achieved through a careful selection of these parameters. Our analysis encompasses various cases, including Bell states, Werner states, and Horodecki states, demonstrating that the asymptotic states can exhibit steering, entanglement, and Bell nonlocality. Additionally, we find that these three quantum measures of correlations can withstand the influence of the environment, maintaining their properties even over extended periods.

Proportional directional valve based automatic steering system for tractors

Most automatic steering systems for large tractors are designed with hydraulic systems that run on either constant flow or constant pressure. Such designs are limited in adaptability and applicability. Moreover, their control valves can unload in the neutral position and eventually lead to serious hydraulic leakage over long operation periods. In response to the problems noted above, a multifunctional automatic hydraulic steering circuit is presented. The system design is composed of a 5-way-3-position proportional directional valve, two pilot-controlled check valves, a pressure-compensated directional valve, a pressurecompensated flow regulator valve, a load shuttle valve, and a check valve, among other components. It is adaptable to most open-center systems with constant flow supply and closed-center systems with load feedback. The design maintains the lowest pressure under load feedback and stays at the neutral position during unloading, thus meeting the requirements for steering. The steering controller is based on proportional-integral-derivative(PID) running on a 51-microcontroller-unit master control chip. An experimental platform is developed to establish the basic characteristics of the system subject to stepwise inputs and sinusoidal tracking. Test results show that the system design demonstrates excellent control accuracy, fast response, and negligible leak during long operation periods.

Study of active beam steering system with a simple method

We develope a simple method to stabilize the beam during propagation. Combination of the self-developed control module and the large diameter mirrors reconstruct the beam stabilization system, and some important procedures are presented, such as calibration arid average filter. The results show that the horizontal pointing and vertical pointing are stabilized to within 8.43 and 7.59 μrad, and the beam horizontal position and vertical position are stabilized to within 2.16 and 2.11 μm respectively. The regulating time is within 84 ms. Thus the method presented is effective for the current stabilization system applied in lithography tools.