Evaluation of the Impact of Refined Quality Control Management Model on the Qualified Rate of Disinfection and Sterilization of Surgical Instruments in the Sterilization Supply Center

Objective:To evaluate the application value of a refined quality control management model for a sterilization supply center.Methods:A retrospective analysis was conducted on the work situation of the sterilization supply center from January 2021 to January 2023.The work situation before January 31,2022,was classified as the control group;a routine quality control management model was implemented,and the work situation after January 31,2022,was classified as the observation group.The quality of medical device management and department satisfaction between the two groups were compared.Results:The timely recovery and supply rate,classification and cleaning pass rate,disinfection pass rate,packaging pass rate,sterilization pass rate,and department satisfaction score in the observation group were all higher than those of the control group(P<0.05).Conclusion:Implementing a refined quality control management model in the sterilization supply center can improve the quality management level of medical devices and department satisfaction and is worthy of promotion.

Review of Power Supply and Distribution Construction Technology for Highway Electromechanical Engineering

In recent years,China has made significant progress in the construction of highways,resulting in an improved highway network that has provided robust support for economic and social development.However,the rapid expansion of highway construction,power supply,and distribution has led to several challenges in mechanical and electrical engineering technology.Ensuring the safe,stable,and cost-effective operation of the power supply and distribution system to meet the diverse requirements of highway operations has become a pressing issue.This article takes an example of a highway electromechanical engineering power supply and distribution construction project to provide insight into the construction process of highway electromechanical engineering power supply and distribution technology.

An Algorithm for Short-Circuit Current Interval in Distribution Networks with Inverter Type Distributed Generation Based on Affine Arithmetic

During faults in a distribution network,the output power of a distributed generation(DG)may be uncertain.Moreover,the output currents of distributed power sources are also affected by the output power,resulting in uncertainties in the calculation of the short-circuit current at the time of a fault.Additionally,the impacts of such uncertainties around short-circuit currents will increase with the increase of distributed power sources.Thus,it is very important to develop a method for calculating the short-circuit current while considering the uncertainties in a distribution network.In this study,an affine arithmetic algorithm for calculating short-circuit current intervals in distribution networks with distributed power sources while considering power fluctuations is presented.The proposed algorithm includes two stages.In the first stage,normal operations are considered to establish a conservative interval affine optimization model of injection currents in distributed power sources.Constrained by the fluctuation range of distributed generation power at the moment of fault occurrence,the model can then be used to solve for the fluctuation range of injected current amplitudes in distributed power sources.The second stage is implemented after a malfunction occurs.In this stage,an affine optimization model is first established.This model is developed to characterizes the short-circuit current interval of a transmission line,and is constrained by the fluctuation range of the injected current amplitude of DG during normal operations.Finally,the range of the short-circuit current amplitudes of distribution network lines after a short-circuit fault occurs is predicted.The algorithm proposed in this article obtains an interval range containing accurate results through interval operation.Compared with traditional point value calculation methods,interval calculation methods can provide more reliable analysis and calculation results.The range of short-circuit current amplitude obtained by this algorithm is slightly larger than those obtained using the Monte Carlo algorithm and the Latin hypercube sampling algorithm.Therefore,the proposed algorithm has good suitability and does not require iterative calculations,resulting in a significant improvement in computational speed compared to the Monte Carlo algorithm and the Latin hypercube sampling algorithm.Furthermore,the proposed algorithm can provide more reliable analysis and calculation results,improving the safety and stability of power systems.

Sterilization Effect of Cooking Process for Guilin Rice Noodles Based on Heat Conduction Model

Guilin rice noodles, a unique cuisine from Guilin, Guangxi, is renowned both domestically and internationally as one of the top ten “Guilin Classics”. Utilizing a heat conduction model, this study explores the effectiveness of the cooking process in sterilizing Guilin rice noodles before consumption. The model assumes that a large pot is filled with boiling water which is maintained at a constant high temperature heat resource through continuous gentle heating. And the room temperature is set as the initial temperature for the preheating process and the final temperature for the cooling process. The objective is to assess whether the cooking process achieves satisfactory sterilization results. The temperature distribution function of rice noodle with time is analytically obtained using the separation of variables method in the three-dimensional cylindrical coordinate system. Meanwhile, the thermal diffusion coefficient of Guilin rice noodles is obtained in terms of Riedel’ theory. By analyzing the elimination characteristics of Pseudomonas cocovenenans subsp. farinofermentans, this study obtains the optimal time required for effective sterilization at the core of Guilin rice noodles. The results show that the potential Pseudomonas cocovenenans subsp. farinofermentans will be completely eliminated through continuously preheating more than 31 seconds during the cooking process before consumption. This study provides a valuable reference of food safety standards in the cooking process of Guilin rice noodles, particularly in ensuring the complete inactivation of potentially harmful strains such as Pseudomonas cocovenenans subsp. farinofermentans.

Operation Control Method of Relay Protection in Flexible DC Distribution Network Compatible with Distributed Power Supply

A novel operation control method for relay protection in flexible DC distribution networks with distributed power supply is proposed to address the issue of inaccurate fault location during relay protection,leading to poor performance.The method combines a fault-tolerant fault location method based on long-term and short-term memory networks to accurately locate the fault section.Then,an operation control method for relay protection based on adaptive weight and whale optimization algorithm(WOA)is used to construct an objective function considering the shortest relay protection action time and the smallest impulse current.The adaptive weight and WOA are employed to obtain the optimal strategy for relay protection operation control,reducing the action time and impulse current.Experimental results demonstrate the effectiveness of the proposed method in accurately locating faults and improving relay protection performance.The longest operation time is reduced by 4.7023 s,and the maximum impulse current is limited to 0.3 A,effectively controlling the impact of large impulse currents and enhancing control efficiency.

Carbon distribution strategy of Aurelia coerulea polyps in the strobilation process in relation to temperature and food supply

Mass occurrences of moon jellyfish have been observed in coastal waters. Strobilation directly determines the initial population size of adult jellyfish, but energy distribution during the strobilation process is not well understood. In this study, strobilation was induced in polyp of Aurelia coerulea by elevating temperature. The different stages in the strobilation process, including polyp budding, strobilation and body growth, were investigated at six temperature levels(8, 10, 13, 15, 17 and 19°C) and five food supply levels(0, 30, 60, 100 and 150 μg C/L). The results showed that the duration of strobilation preparation stage(SP) remarkably decreased with increasing temperature. Food level positively af fected the production of buds and ephyrae and the body growth of parent polyps. Of the six temperatures tested, 13°C was optimal for strobilation. At 13°C, strobilation activity was enhanced, and this treatment resulted in the greatest energy distribution, highest ephyrae production and longest duration of strobilation stage(SS). Polyps tended to allocate 6.58%–20.49% carbon to buds with sufficient food supply regardless of temperature. The body growth of parent polyps was highest at lower temperatures and higher food levels. This study is the first to provide information on carbon-based energy distribution strategy in the polyp strobilation process. We concluded that budding reproduction is a lower-risk strategy for A. coerulea polyps to increase populations. Even during strobilation season, polyps prioritize budding, but at the optimal strobilation temperature, polyps utilize a portion of the energy stored for budding to release ephyrae. The body carbon content of parent polyps may be considered as strategic energy reserves, which could help to support budding activities and strobilation during harsh conditions.

Improve the Center Supply Room to Ensure the Quality System for Disinfection and Sterilization

The disinfection supply room is a very important department of the hospital.Its main job is to provide sterile equipment and dressings for various activities in the hospital.It is an important department in the hospital infection management process.Doing a good job in the control and management of the disinfection supply room is the main link to ensure the prevention and control of hospital infections.The quality of management directly affects modern clinical medical work.Therefore,the hospital supply room should be strengthened and improved to ensure that all items can be safely used in the work process,which can effectively avoid the occurrence of cross-infection incidents in the hospital.

Analysis of the Effect of Quality Control Circle on the Central Sterile Supply Department

Objective:To analyze the effect of quality control circle on the central sterile supply department(CSSD).Methods:The control group and the observation group each consisted of 180 instruments received by the sterilization supply center from January to March 2023 and 11 CSSD staff.The control group underwent routine management while quality control circle was implemented in the observation group.The quality of work,disinfection and sterilization qualification rates,disinfection and sterilization of various instruments,cleaning indicators,and management satisfaction of both groups were compared.Results:The observation group scored higher in terms of work quality,the qualification rate of disinfection and sterilization in each link,the disinfection and sterilization of instruments,and cleaning indicators compared to the control group.Besides,the management satisfaction of the observation group was higher than that of the control group(P<0.05).Conclusion:A quality control circle ensures the quality of work,improves the cleaning,disinfection,and sterilization of instruments of the CSSD,and improves the management satisfaction of the CSSD staff.

Research and Application of High-Voltage Power Supply and Distribution on Launch Vehicle

High-power electric actuators are generally used on solid propellant motors,which further enhances the requirement on onboard supply voltage and output power of a launch vehicle.In this paper,combined with the electrical demand of China’s new generation solid-liquid bundled launch vehicle(LM-6 A),high-voltage battery technology,high-power switch control technology,insulation protection technology under low pressure are studied,and the key technologies and schemes are presented.The flight test of LM-6 A shows that the high-voltage power supply and distribution technology adopted is reasonable and feasible,and can be used as a reference for the designs of other launch vehicles or spacecrafts.

Matching Gasoline Supply with Distribution Requirements Optimizes Depot Storage Capacity and Performance

This study was done for one of the Nigerian National Petroleum Corporation （refiner） depot supplied by a multi-product （gasoline, diesel and kerosene） pipeline. Distribution/loading facility designed for a total of six arms： two each for gasoline, kerosene and diesel （or 33.33% for each product） whereas gasoline storage capacity is 55%, diesel, 33%, kerosene 11%, and slops, 1% of the total depot capacity. The design supply to distribution chain capacity ratio showed a mismatch, which in actual operation becomes 2：1. The above design created ullage problem at sustained supplies, gross under utilization of supply chain infrastructures and poor operational performance. After a technical evaluation, a section of the depot storage to loading pipeline network was re-designed and modified to enable products supply capacity to match loading and minimize storage. Hence, the gasoline loading became 66.67%, kerosene and diesel, each of 16.67%, increasing the actual supply to distribution chain capacity ratio from 2：1 to 2：2 （and when required, can be maximized to 2：3） thereby correcting the apparent mismatch between the supply and distribution chain capacities. The modification has enabled the refiner to increase depot and upstream supply chain utilization

Research on Strategies to Promote the Integration of Industrial Chain,Innovation Chain,and Supply Chain in the Beijing-Tianjin-Hebei Region

With the rapid development of international economic integration,industrial competition has gradually evolved from a competition of enterprise capabilities and resources to a game of comprehensive system collaboration capabilities among all participating parties.That is,the competition in the current international economy has evolved into an interactive and collaborative competition among the“three chains”of industry chain,capital chain,and innovation chain.Based on analyzing the current situation of the integration of the industrial chain,innovation chain,and supply chain,this article deeply analyzes the geographical advantages of the three chains in the Beijing-Tianjin-Hebei region.From the perspective of scientific and technological innovation and talent cooperation synergy,it proposes the integration strategy of the three chains in the Beijing-Tianjin-Hebei region.

On Deciding Sustainable Distribution Center of a Supply Chain

A supply chain is a network that performs the procurement of raw material, the transportation of raw material to intermediate and end products, and the distribution of end products to retailers or customers. Installation and operation of distribution centers and all downstream members play a vital role in fulfilling the customers demand and have a great impact for supply chain management performance. In this paper we address a new approach for solving a supply chain optimization model to decide distribution centers based on environmental consideration.

Application of Control Technology Based on PLC in Power Supply and Distribution System

With the rapid development of China＇s economy, the entire social requires the safety, reliability and automation of power supply and distribution system must be improved. Therefore, extensive application of PLC technology in power supply and distribution system has great significance to ensure normal social life and production, so as to realize the entire national economy sustained and healthy development. This paper briefly introduces the PLC technology, and with practice elaborates the applications of control technology based on PLC in power supply and distribution system fi：om the reform of low-voltage distribution system, automation management and relay protection of power supply and distribution system etc.

The Mechanism Research of Green Supply Chain Synergy Profit Distribution Based on the Shapley Value Method

Under green supply chain mode, how to Carry out the distribution of profits between subjects is an important problem. Through the comparison of the green supply chain benefit allocation of non-cooperative game and cooperative game the payoffmatrix, it is clearly that the necessity of interest distribution cooperative game. Put general manufacturing enterprises of green supply chain as the research object, using Shapley value method for theory analysis and example verification, vertifys that enterprise synergy gains more than their own separate management, and puts forward a feasible path of supply chain collaboration through the construction of the distribution of interests coordination model.

Design and Application of Power Supply and Distribution System of Chang'e 4 Relay Satellite

A 28 V-half-regulated power bus topology and an integrated PCDU (Power Conditioning and Distribution Unit) were adopted to meet the energy demand for the Chang'e 4 relay satellite.This paper first introduces the mission features and composition of the PSDS (Power Supply and Distribution System) for the Chang'e 4 relay satellite.Due to this satellite's unusual orbit,operational mode and project restrictions,special analysis and design was conducted on the PSDS from the perspective of weight-reduction,power management,and reliability and so on.Extreme low temperature storage of SA (Solar Array) was considered and how the antenna affects the SA was analyzed.A new kind of high-specific-energy 45 Ah (Ampere-hour) battery cell was used for the first time.To make sure that the satellite would successfully pass the long shadow zones,a 100% DOD (Depth of Discharge) experiment was carried out on the battery.Since the sunlight is almost always available and there are very few times for the battery to charge or discharge,battery care to extend its lifetime is also discussed.PCDU is a device that integrates power conditioning and power distribution in one unit.The PCDU on Chang'e 4 relay satellite can output more power with less weight because of the adoption of a 28 V-half-regulated power bus topology which was also used for the first time and used lighter material for its mechanical framework.Experiment under low temperature on PCDU was conducted as well and a hot backup equalizing charge technique which is beneficial to keep performance of the battery is illustrated.The power distribution module,which is a module of PCDU,enhances the power utilization security by utilizing a static impedance measurement and build-in-test to avoid possible short circuits.As for EED (Electrical Explosive Device) module,a protection plug was specially designed and three switches with different functions were connected in series to prevent the EED from exploding by error.In addition,the allowable minimum EED bus voltage for each EED was evaluated in case of low battery voltage caused by the possible postponement of the launching time.Complete verification experiments on the ground were conducted to confirm the correctness of the design and on-orbit test data conformed to the expected results and theoretical calculation.The power supply and distribution system has been working normally since the day the Chang'e 4 relay satellite was launched into space.

Financial Coordination and Income Distribution of Agricultural Supply Chain

The agriculture field is a fundamental industry which supports the rapid development of the nation?s economy.However,credit constraints faced by farmers have restricted the modernization in the agricultural industry.The agricultural supply chain finance is effective in promoting rural industrial revitalization and agricultural modernization,which is of great significance to the transformation and development of rural economy and agriculture in China.In this paper,the financial coordination model in agricultural supply chain is constructed,and the income distribution model of Shapley value method is introduced.The results showed that the agricultural supply chain finance can significantly improve the income of the participants in the agricultural industrial chain and verify the economic feasibility of agricultural supply chain finance.

NOVEL AIRCRAFT ELECTRICAL POWER DISTRIBUTION SYSTEM BASED ON DISTRIBUTED COMPUTER

As a matured technique used in many fields,the distributed computer system is still a new management method for the aeronautical electrical power distribution system in our country. In this paper, a novel aircraft electrical power distribution system based on the distributed computer system is proposed. The principles, features and structure of the aircraft electrical power distribution system and the distributed computer system named electrical load management system (ELMS) are studied. The ELMS composed of four electrical load management centers (ELMCs) and two power source processors (PSPs) operates in the 1553B buses. Principles of the ELMCs and the PSPs are introduced. With the application of the distributed computer system, the aircraft electrical power distribution system is simple, adaptable and flexible.

Supply modes for renewable-based distributed energy systems and their applications:case studies in China

Distributed energy systems(DES),as an integrated energy system with coupled distributed energy resources,have great potential in reducing carbon dioxide emissions and improving energy efficiencies.Considering the background of urbanization and the energy revolution in China,the study investigates the renewable-based DESs supply modes and their application in China.A new method is proposed to classify DESs supply modes into three categories considering the renewable resource in domination,and their application domains are discussed.A comprehensive model is given for economic and environmental evaluation.Typical case studies show that the renewable-based DES systems can supply the energy in a cost-effective and environment-friendly way.Among them,the biomass waste dominated supply mode can not only achieve"zero"carbon emissions but also"zero"energy consumption,even though not yet economically attractive under the present policy and market conditions.Thus,recommendations are given to promote the further deployment of renewable-based DESs,regarding their supply modes,policy requirements,and issues to be addressed.

Spatial distribution of the potential forest biomass availability in Europe

Background: European forests are considered a crucial resource for supplying biomass to a growing bio-economy in Europe. This study aimed to assess the potential availability of forest biomass from European forests and its spatial distribution. We tried to answer the questions(i) how is the potential forest biomass availability spatially distributed across Europe and(ii) where are hotspots of potential forest biomass availability located?Methods: The spatial distribution of woody biomass potentials was assessed for 2020 for stemwood, residues(branches and harvest losses) and stumps for 39 European countries. Using the European Forest Information SCENario(EFISCEN) model and international forest statistics, we estimated the theoretical amount of biomass that could be available based on the current and future development of the forest age-structure, growing stock and increment and forest management regimes. We combined these estimates with a set of environmental(site productivity, soil and water protection and biodiversity protection) and technical(recovery rate, soil bearing capacity) constraints, which reduced the amount of woody biomass that could potentially be available. We mapped the potential biomass availability at the level of administrative units and at the 10 km × 10 km grid level to gain insight into the spatial distribution of the woody biomass potentials.Results: According to our results, the total availability of forest biomass ranges between 357 and 551 Tg dry matter per year. The largest potential supply of woody biomass per unit of land can be found in northern Europe(southern Finland and Sweden, Estonia and Latvia), central Europe(Austria, Czech Republic, and southern Germany),Slovenia, southwest France and Portugal. However, large parts of these potentials are already used to produce materials and energy. The distribution of biomass potentials that are currently unused only partially coincides with regions that currently have high levels of wood production.Conclusions: Our study shows how the forest biomass potentials are spatially distributed across the European continent, thereby providing insight into where policies could focus on an increase of the supply of woody biomass from forests. Future research on potential biomass availability from European forests should also consider to what extent forest owners would be willing to mobilise additional biomass from their forests and at what costs the estimated potentials could be mobilised.

Review of Modeling Methods of Distributed Energy Supply System Connected to the Grid

At present, the development of distribution network can’t meet the requirements of rapid economic development. The traditional single energy supply is difficult to meet the request, and distributed energy supply has a lot of advantages compared to it, particularly it's close to the end users, and they have been developed well and applied widely in recent years. This paper summarizes the features and current development of the distributed energy supply, and mainly describes the grid-connection model of distributed energy supply. Base on the mathematic grid-connection model of distributed power sources with different generation principles as well as that energy storage, the treatment of these models in distribution network power flow analysis is also presented.