Effect of titanium on the sticking of pellets based on hydrogen metallurgy shaft furnace:Behavior analysis and mechanism evolution

Direct reduction based on hydrogen metallurgical gas-based shaft furnace is a promising technology for the efficient and low-carbon smelting of vanadium-titanium magnetite.However,in this process,the sticking of pellets occurs due to the aggregation of metal-lic iron between the contact surfaces of adjacent pellets and has a serious negative effect on the continuous operation.This paper presents a detailed experimental study of the effect of TiO2 on the sticking behavior of pellets during direct reduction under different conditions.Results showed that the sticking index(SI)decreased linearly with the increasing TiO2 addition.This phenomenon can be attributed to the increase in unreduced FeTiO3 during reduction,leading to a decrease in the number and strength of metallic iron interconnections at the sticking interface.When the TiO2 addition amount was raised from 0 to 15wt%at 1100°C,the SI also increased from 0.71%to 59.91%.The connection of the slag phase could be attributed to the sticking at a low reduction temperature,corresponding to the low sticking strength.Moreover,the interconnection of metallic iron became the dominant factor,and the SI increased sharply with the increase in re-duction temperature.TiO2 had a greater effect on SI at a high reduction temperature than at a low reduction temperature.

Assessment of Knowledge, Attitude and Practices among Healthcare Workers in a Tertiary Care Hospital on Needle Stick Injury

Purpose: Needle-stick injury (NSI) is one of the most potential occupational hazards for healthcare workers because of the transmission of blood-borne pathogens. As per recent data, around 30 lakh healthcare workers sustain Needle stick injuries each year. This study was conducted to assess healthcare workers’ knowledge, attitude and practices regarding needle stick injury. Materials & Methods: A cross-sectional study was conducted in a Tertiary Care Hospital over the period of 3 months. The study population consisted of Intern Doctors, Post Graduate resident Doctors, Staff Nurses, laboratory technicians of Government Medical College and New Civil Hospital, Surat (n = 300). The data were collected using a self-administered questionnaire via the means of Google Forms. Questionnaire was made with prior review literature. The data obtained were entered and analysed in Microsoft Excel. Results: The prevalence of NSI in our study was 46%, with a higher prevalence among the PG residents (72%). Overall scores regarding knowledge and attitude were better in PG residents (knowledge score > 7 in 71% and Attitude Score > 7 in 68% of PG Residents). Even though the PG residents scored highest in the knowledge category, the majority of them suffered needle stick injuries as a result of poor practice scores. Among those who had NSI (n = 139/300), 70% of study participants had superficial injuries, only 9% reported the incident, 18% got medical attention within 2 hours of the incident, and 7% followed up to recheck their viral markers status. Most incidents of NSI were due to hypodermic needles while recapping needles. Conclusion: Exposure to needle stick injuries and their underreporting remains a common problem. It is imperative that healthcare workers receive regular training on the proper handling of sharp objects. We can also draw the conclusion that preventing NSIs requires putting knowledge into practice.

Effect of Mouth Opening Training Stick Combined with Oral Massage on Mouth Opening Difficulty in Head and Neck Cancer Patients after Treatment

Objective: To study the application effect of mouth-opening training sticks combined with oral massage on patients with mouth-opening difficulty after treatment for head and neck cancer. Methods: Using convenient sampling, 60 patients with mouth-opening difficulty after treatment for head and neck cancer admitted to the Oncology Department from February 2022 to October 2023 were selected for a 2-week exercise and nursing program. The patients were divided into a control group (February 1, 2022 to November 30, 2022) and an observation group (December 1, 2022 to October 31, 2023), with 30 patients in each group. The control group underwent routine mouth-opening functional exercises combined with cork for oral support training, while the observation group underwent routine mouth-opening functional exercises combined with oral massage and mouth-opening training sticks for oral support training. The mouth-opening degree, mouth-opening difficulty level, comfort level, compliance, and quality of life were observed in both groups. Results: Before the intervention, there were no statistically significant differences in mouth-opening degree and mouth-opening difficulty level between the two groups (P > 0.05). After the intervention, the mouth-opening degree, mouth-opening difficulty level, oral comfort level, compliance, and QLICP-HN scores in the observation group were all better than those in the control group, with statistically significant differences (P < 0.05). Conclusion: The combination of mouth-opening training sticks and oral massage with mouth-opening functional exercises can effectively improve the degree of mouth-opening difficulty, enhance oral comfort, increase compliance with mouth-opening exercises, and improve quality of life.

闭合复位内固定联合joy stick操纵杆技术治疗儿童难复性肱骨髁上骨折效果观察

目的观察闭合复位内固定联合joy stick操纵杆技术治疗儿童难复性肱骨髁上骨折的临床效果。方法选择因“肘关节外伤后肿痛伴活动受限”入院患儿4例,均诊断为GartlandⅢ型肱骨髁上骨折,均采用闭合复位内固定联合joy stick操纵杆技术治疗。结果4例患儿均获得满意复位,无一例转为切开复位,平均手术时间66 min,住院时间均<5 d。出院后规律复查换药,1月后均恢复良好,骨折线对位满意,未出现感染等短期并发症,拔除克氏针。结论Joy stick操纵杆技术不仅可以更加准确地控制肱骨轴的旋转,还能更快地获得复位和维持复位,进针顺利,手术时间短,减少转为切开复位,降低手术难度,且未增加围手术期并发症。

Microscopic Indicators of Stick-Slip and Creep-Slip in Deformation Products From the Daqingshan Piedmont Active Fault

Through the collection of oriented samples,consolidation of undisturbed samples,and systematic microscopy of thin sections,the deformation products from the Daqingshan piedmont active fault zone have been studied.The obtained results have been analyzed in combination with those of rock fracture experiments and macroscopic surveys.Based on the above,the present article summarizes the microscopic indicators of stick-slip and creep-slip,which reflect the characteristics of fault movement,and has given some suggestion on relevant problems.

Antibacterial Activities of <i>Psidium guajava</i>(Guava) and <i>Velvet tamarin</i>(Icheku) Local Chewing Sticks on <i>Streptococcus mutans</i>Isolated from Human Mouth

Globally dental diseases are mainly caused by Streptococcus mutans, it is one of the leading causative agents of dental caries worldwide, because of its resistance to conventional antibacterial agents, alternative therapies are used to control resistance of oral pathogens. This research was done to determine the antibacterial activities of Psidium guajava (guava) and Velvet tamarin (Icheku) chewing sticks on Streptococcus mutans isolated from the oral cavity. The study was conducted in Owerri Imo State Nigeria during November-December period. Phytochemical analysis of the plant extracts was done using appropriate techniques. The procedure used for antimicrobial susceptibility test was disk diffusion method. Serial dilutions of Psidium guajava (guava) and Velvet tamarind (Icheku) extracts were prepared, Muller-Hinton media was used to put together the extract of serial dilutions of Psidium guajava (guava) and Velvet tamarin (Icheku) and a microbiological procedure were used for visually determining the minimum inhibitory concentration as well as minimum bactericidal concentration. Phytochemical evaluation of the plants’ extracts revealed that it contains saponins, tannins, alkaloid, steriods, glycosides and phenol. The results obtained from the antibacterial susceptibility testing of the extracts against Streptococcus mutans showed that the zones of inhibition recorded ranged from 18 mm to 27 mm. Ethanol (Soxhlet) extract of Icheku twig showed no zone of inhibition on the isolated organism. The ethanol (soxhlet) extract of the individual Psidium guajava (guava) and Velvet tamarin (Icheku) has a better antibacterial effect when compared to their aqueous extracts and combined forms. Psidium guajava (Guava) and Velvet tamarin (Icheku) twigs are made up of composite that is active against S. mutans and can be used in oral hygiene. There is a need for further investigation on the plant extracts as the rural poor make use of it because it is cheap, readily available and the rich also use it once they are in the village mostly in Eastern Nigeria. Similarly chewing sticks has been reported to be practiced by 90 of rural population in Nigeria.

Modeling and simulation of solvent behavior and temperature distribution within long stick propellants with large web thickness undergoing drying

Drying is a complicated physical process which involves simultaneous heat and mass transfer in the removal of solvents inside propellants.Inappropriate drying techniques may result in the formation of a hard skin layer near the surface to block the free access of most solvent through for long stick propellants with large web thickness,which lead to lower drying efficiency and worse drying quality.This study aims to gain a comprehensive understanding of drying process and clarify the mechanism of the blocked layer near the propellant surface.A new three-dimensional coupled heat and mass transfer(3D-CHMT)model was successfully developed under transient conditions.The drying experiment results show that the 3DCHMT model could be applied to describe the drying process well since the relative error of the content of solvent between simulation and experiment values is only 5.5%.The solvent behavior simulation demonstrates that the mass transfer process can be divided into super-fast(SF)and subsequent minorfast(MF)stages,and the SF stage is vital to the prevention of the blocked layer against the free access for solvent molecules inside propellant grains.The effective solvent diffusion coefficient(Deff)of the propellant surface initially increases from 3.4×10^(-6)to 5.3×10^(-6)m^(2)/s as the temperature increases,and then decreases to 4.1×10^(-8)m^(2)/s at 60-100 min.The value of Deffof surface between 0-1.4 mm has a unique trend of change compared with other regions,and it is much lower than that of the internal at100 min under simulation conditions.Meanwhile,the temperature of the propellant surface increases rapidly at the SF stage(0-100 min)and then very slowly thereafter.Both the evolution of Deffand temperature distribution demonstrate that the blocked layer near the propellant surface has been formed in the time period of approximately 0-100 min and its thickness is about 1.4 mm.To mitigate the formation of blocked layer and improve its drying quality of finial propellant products effectively,it should be initially dried at lower drying temperature(30-40℃)in 0-100 min and then dried at higher drying temperature(50-60℃)to reduce drying time for later drying process in double base gun propellants.The present results can provide theoretical guidance for drying process and optimization of drying parameters for long stick propellants with large web thickness.

Development of basic technique to improve seismic response accuracy of tributary area-based lumped-mass stick models

Although a detailed finite element(FE) model provides more precise results, a lumped-mass stick(LMS) model is preferred because of its simplicity and rapid computational time. However, the reliability of LMS models has been questioned especially for structures dominated by higher modes and seismic inputs. Normally, the natural frequencies and dynamic responses of a LMS model based on tributary area mass consideration are different from the results of the FE model. This study proposes a basic updating technique to overcome these discrepancies; the technique employs the identical modal response, D(t), to the detailed FE model. The parameter D(t) is a time variable function in the dynamic response composition and it depends on frequency and damping ratio for each mode, independent of the structure's mode shapes. The identical response D(t) for each mode is obtained from the frequency adaptive LMS model; the adaptive LMS model which can provide identical modal frequencies as the detailed FE model. Theoretical backgrounds and formulations of the updating technique are proposed. To validate the updating technique, two types of structures(a symmetric straight column and an unsymmetric T-shaped structure) are considered. From the seismic response results including base shear and base moment, the updating technique considerably improves the seismic response accuracy of the tributary area-based LMS model.

Neighbors Stick Together

The election of Yoon Suk-yeol as new president of the Republic of Korea(ROK)has triggered concerns regarding future relations between China and the ROK.These concerns mostly stem from Yoon's tough talk against China.For example,he called for the deployment of additional U.S.-manufactured Terminal High Altitude Area Defense system units in the country.But it is normal for a candidate to solicit votes by making sensational pledges,which may not necessarily be honored after they assume office.No matter which political camp is in power in the ROK,China-ROK ties are expected to strengthen.

SUPERLOVE Stick to the Sweets

Remember Audrey Hepburn as Holly Golightly in her pearls and black dress,devouring a store-bought Danish and coffee out of a paper bag,while gazing longingly at the window of Tiffan's?Had she lived in Guangzhou a few decades later she wouldn't have had to bring her own breakfast She could have walked into Superlove dressed in all her glory gazed into those identical jewel boxes and promptly ordered a cappuccino and pastry instead.

As the COVID-19 Epidemic Gets Rampant across the World,China should Stick to the"Four Adherences"

The year 2020 is an important one for the Chinese nation to achieve the decisive victory for the construction of a moderately prosperous society in all respects,realize comprehensive rejuvenation and accelerate its march to the center of the world stage,and is also a key year for the international community to promote a new round of economic globalization and seek to improve global governance.

An Artificial Intelligence Algorithm for the Real-Time Early Detection of Sticking Phenomena in Horizontal Shale Gas Wells

Sticking is the most serious cause of failure in complex drilling operations.In the present work a novel“early warning”method based on an artificial intelligence algorithm is proposed to overcome some of the known pro-blems associated with existing sticking-identification technologies.The method is tested against a practical case study(Southern Sichuan shale gas drilling operations).It is shown that the twelve sets of sticking fault diagnostic results obtained from a simulation are all consistent with the actual downhole state;furthermore,the results from four groups of verification samples are also consistent with the actual downhole state.This shows that the pro-posed training-based model can effectively be applied to practical situations.

Friction heat production and atom diffusion behaviors during Mg-Ti rotating friction welding process

An innovative physical simulation apparatus, including high speed camera, red thermal imaging system, and mechanical quantity sensor, was used to investigate the friction heat generation and atom diffusion behavior during Mg-Ti friction welding process. The results show that the friction coefficient mainly experiences two steady stages. The first steady stage corresponds to the Coulomb friction with material abrasion. The second steady stage corresponds to the stick friction with fully plastic flow. Moreover, the increasing rates of axial displacement, temperature and friction coefficient are obviously enhanced with the increase of rotation speed and axial pressure. It can also be found that the there exists rapid diffusion phenomenon in the Mg-Ti friction welding system. The large deformation activated diffusion coefficient is about 105 higher than that activated by thermal.

STUDY ON SLAG DETACHABILITY AND STICK SLAG MECHANISM OF SSFCE

In the paper, the effects of linear expansion coefficient and basic index of melting slag on the detachability of self shielded flux cored electrode (SSFCE) are investigated. An equation is obtained on the principles of ceramics and mineralography which predict the detachability of basic SSFCE. In addition, stick slag mechanism of SSFCE is analyzed.

供需中的Hockey-stick现象分析及对策研究

许多公司的产品需求在连续而固定的周期会出现前低后高,即 Hockey-stick 现象,这种现象普遍存在于供应链之中并困扰着许多的企业管理者.不认为其产生的原因是公司对销售人员的周期性考评的传统观点,并以快速消费品行业为背景,通过建立模型,得出了这种现象主要是公司普遍采用的总量折扣(Volume Discounts)价格政策导致的结论,并提出了公司可以通过多产品组合定价等方法缓和这个问题,最后通过一个实例证实了文章的观点.

Effects of Plant Spacing and Finger Sticking Area Settings for Machine Transplanting on Yield of Double-season Early Rice

The effects of rice transplanters＇ transplanting settings（plant spacing and finger sticking area） on rice yield were investigated in two early-season rice cultivars：hybrid rice cultivar（Zhuliangyou 819） and conventional rice cultivar（Zhongjiazao 17）.The results showed that,different transplanting settings resulted in different numbers of transplanted basic seedlings,and the rice yield was significantly correlated with the number of transplanted basic seedlings.The number of transplanted basic seedlings increased with the decrease of plant spacing and the increase of finger sticking area.The rate of lost hills of machine transplanting decreased with the increase of finger sticking area.The leaf area index and amount of dry matter accumulation were highly correlated with the number of transplanted basic seedlings.The average yield of the rice transplanted with a plant spacing of11.5 cm was higher than that with a plant spacing of 13.8 cm.In the field transplanted with the rice under the plant spacing of 13.8 cm,the rice yield increased with the increase of finger sticking area,and the finger sticking area of 2.23 cm2 showed the highest rice yield of 8 174.16 kg/hm2 of Zhuliangyou 819 and 7 925.54kg/hm2 of Zhongjiaozao17.In the field transplanted with the rice under the plant spacing of 11.5 cm,the rice yield was the highest with the finger sticking area of 1.83 cm2,and then decreased with the large finger sticking area.Under the plant spacing of 11.5 cm,the highest rice yields of Zhuliangyou 819 and Zhongjiaozao17 were 8 492.94 kg/hm2 and 8 000.23 kg/hm2,respectively.Therefore,the preferred machine transplanting settings for double-season early rice are a plant spacing of11.5 cm and a finger sticking area of 1.83 cm2,while the finger sticking area should be increased to 2.23 cm2 for conventional rice cultivars.

Hockey-stick现象与企业物流绩效关联的实例分析

Hockey-stick现象普遍存在于供应链之中并对企业的生产和物流运作极为不利。通过对某国际著名食品公司在大陆某生产厂的深入调研、数据收集和分析,验证了Hockey-stick现象对需求波动以及需求波动对企业物流绩效的影响。

Prevalence of Occupational Injury and Knowledge of Post-Exposure Prophylaxis Accessibility among Healthcare Workers in Mogadishu, Somalia

Introduction: Healthcare workers in Mogadishu, Somalia face significant occupational injury risks, particularly needle stick injuries, with 61.1% reporting incidents. This poses a serious threat to their health, leading to infections such as hepatitis B, hepatitis C, and HIV. Despite the high prevalence of injuries, awareness of Post-Exposure Prophylaxis (PEP) accessibility is relatively high, with 84.0% of respondents aware of it. However, there are gaps in knowledge and implementation, as evidenced by variations in availability of PEP. Improving workplace safety measures, providing comprehensive training on injury prevention and PEP protocols, and ensuring consistent availability of PEP in healthcare facilities are crucial steps to safeguard the well-being of healthcare workers in Mogadishu, Somalia. Methods: A cross-sectional study was conducted among hospital workers in Mogadishu, Somalia, focusing on professionals from various healthcare facilities. The study targeted nurses, doctors, laboratory personnel, and pharmacists. Purposive sampling was employed, resulting in a sample size of 383 calculated using Fisher’s sample size formula. Data were collected using coded questionnaires entered into Microsoft Excel 2019 and analyzed with SPSS software to generate frequencies and proportions, presented through frequency tables and pie figures. Results: The study in Mogadishu, Somalia, examined the prevalence of occupational injuries and knowledge of Post-Exposure Prophylaxis (PEP) accessibility among healthcare workers. Findings indicate a high prevalence of injuries, with 61.1% reporting incidents, predominantly needle stick injuries (60.6%). Despite the majority seeking prompt medical attention (72.0%), work-related illnesses affected 53.2% of respondents, notably work-related stress (59.5%). While most received training on injury and illness prevention (68.9%), gaps exist in PEP awareness, with 16.0% unaware of it. Nonetheless, 84.0% were aware, predominantly through health facilities (52.0%). Availability of PEP was reported by 71.3% in healthcare facilities, with variations in shift availability. The majority reported guidelines for PEP use (55.7%). Efforts are needed to bolster PEP awareness and ensure consistent availability in healthcare facilities to safeguard worker health. Conclusion: High prevalence of occupational injuries among healthcare workers, with needle stick injuries being the most common (60.6%). Despite this, 84.0% of respondents were aware of Post-Exposure Prophylaxis (PEP), primarily learning about it from health facilities (52.0%). While 71.3% reported the availability of PEP in their facility, 28.7% noted its unavailability. These results emphasize the need for improved education and accessibility of PEP to mitigate occupational injury risks.

APPLICATION OF 2-D MOIRE INTERFEROMETRYOF STICKING FILM IN HUMAN TIBIA MEASUREMENT

This paper makes use of the method of testing and measuring the human body tibia by using2-D moire interferometry of sticking film. hased on the J'--y direction moire patterns recorded synchronously by 2-D optical path,the elastic constant,strain and displacement of the tibia are measured.Compared with the electric measuring method the error is samll and the sensitivity is high.