Suppression of stimulated Brillouin and Raman scatterings using an alternating frequency laser and transverse magnetic fields

A novel scheme to suppress both stimulated Brillouin scattering(SBS) and stimulated Raman scattering(SRS) by combining an alternating frequency(AF) laser and a transverse magnetic field is proposed. The AF laser allows the laser frequency to change discretely and alternately over time. The suppression of SBS is significant as long as the AF difference is greater than the linear growth rate of SBS or the alternating time of the laser frequency is shorter than the linear growth time of SBS. However, the AF laser proves ineffective in suppressing SRS, which usually has a much higher linear growth rate than SBS. To remedy that, a transverse magnetic field is included to suppress the SRS instability. The electrons trapped in the electron plasma waves(EPWs) of SRS can be accelerated by the surfatron mechanism in a transverse magnetic field and eventually detrapped. While continuously extracting energy from EPWs, the EPWs are dissipated and the kinetic inflation of SRS is suppressed. The one-dimensional particle-in-cell simulation results show that both SBS and SRS can be effectively suppressed by combining the AF laser with a transverse magnetic field with tens of Tesla. The total reflectivity can be dramatically reduced by more than one order of magnitude. These results provide a potential reference for controlling SBS and SRS under the related parameters of inertial confinement fusion.

A New Method for In-Situ Measurement of Internal Solitary Waves Based on the Stimulated Raman Scattering in Optical Fibers

In-situ measurement of internal solitary waves(ISWs)is complicated in the ocean due to their randomness.At present,the ISWs are mainly detected by the chain structure of conductivity-temperature-depth systems(CTDs)or temperature sensors.The high cost limits the spatial resolution,which ultimately affects the measuring accuracy of the ISW amplitude.In this paper,we developed an experimental measurement system for detecting ISWs based on the stimulated Raman scattering in distributed optical fibers.This system has the advantages of high precision,low cost,and easy operation.The experimental results show that the system is consistent with CTDs in the measurement of vertical ocean temperature variation.The spatial resolution of the system can reach 1.0 m and the measuring accuracy of temperature is 0.2℃.We successfully detected 3 ISWs by the system in the South China Sea and two optical remote sensing images collected on May 18,2021,the same day of two detected ISWs,verify the occurrence of the measured ISWs.We used the image pairs method to calculate the phase velocity of ISW and the result is 1.71 ms^(-1).By extracting the distances between wave packets,it can be found that the semi-diurnal tide generates the detected ISWs.The impact of the tidal current velocity on the ISW in amplitude is undeniable.Undoubtedly,the system has a great application prospect for detecting ISWs and other dynamic phenomena in the ocean.

Stimulated Brillouin scattering-induced phase noise in an interferometric fiber sensing system

Stimulated Brillouin scattering-induced phase noise is harmful to interferometric fiber sensing systems. The localized fluctuating model is used to study the intensity noise caused by the stimulated Brillouin scattering in a single-mode fiber. The phase noise structure is analyzed for an interferometric fiber sensing system, and an unbalanced Michelson interferometer with an optical path difference of 1 m, as well as the phase-generated carrier technique, is used to measure the phase noise. It is found that the phase noise is small when the input power is below the stimulated Brillouin scattering threshold, increases dramatically at first and then gradually becomes flat when the input power is above the threshold, which is similar to the variation in relative intensity noise. It can be inferred that the increase in phase noise is mainly due to the broadening of the laser linewidth caused by stimulated Brillouin scattering, which is verified through linewidth measurements in the absence and presence of the stimulated Brillouin scattering.

Stimulated Brillouin Scattering Enhancement Factor Improvement in a 11.6-GHz-Linewidth 1.5-kW Yb-Doped Fiber Amplifier

The stimulated Brillouin scattering （SBS） threshold enhancement factor in a pure white noise linewidth broad- ening Yb-doped fiber amplifier （YDFA） with a short large mode area fiber is theoretically and experimentally studied. We demonstrate a 1064.08nm, 11.6 GHz finewidth, 1.5 k W output power YDFA with an SBS threshold enhancement of -57 （26 W SBS threshold with single frequency seed）. The output beam is near-diffraction lim- ited with a beam quality factor elM2 = 1.15 and a slope efficiency of up to 87%. No SBS or stimulated Raman scattering effects are observed in the whole power range. Further power sealing is limited by the available pump power in our system.

Simulation of stimulated Raman scattering signal generation in scattering tissues excited by Bessel beams

Stimulated Raman scattering(SRS)microscopy has the ability of noninvasive imaging of specific chemical bonds and been increasingly used in biomedicine in recent years.Two pulsed Gaussian beams are used in traditional SRS microscopes,providing with high lateral and axial spatial resolution.Because of the tight focus of the Gaussian beam,such an SRS microscopy is difficult to be used for imaging deep targets in scattering tissues.The SRS microscopy based on Bessel beams can solve the imaging problem to a certain extent.Here,we establish a theoretical model to calculate the SRS signal excited by two Bessel beams by integrating the SRS signal generation theory with the fractal propagation method.The fractal model of refractive index turbulence is employed to generate the scattering tissues where the light transport is modeled by the beam propagation method.We model the scattering tissues containing chemicals,calculate the SRS signals stimulated by two Bessel beams,discuss the influence of the fractal model parameters on signal generation,and compare them with those generated by the Gaussian beams.The results show that,even though the modeling parameters have great influence on SRS signal generation,the Bessel beams-based SRS can generate signals in deeper scattering tissues.

Stimulated Raman scattering excited by incoherent light in plasma

Stimulated Raman scattering(SRS)excited by incoherent light is studied via particle-in-cell simulations.It is shown that a large bandwidth of incoherent light can reduce the growth of SRS and electron heating considerably in the linear stage.However,different components of the incoherent light can be coupled by the Langmuir waves,so that stimulated Raman backward scattering can develop.When the bandwidth of incoherent light is larger than the Langmuir wave frequency,forward SRS can be seeded between different components of the incoherent light.The incoherent light can only increase the time duration for nonlinear saturation but cannot diminish the saturation level obviously.

H2 Stimulated Raman Scattering in a Multi-pass Cell with a Herriott Configuration

Stimulated raman scattering （SRS） is an effective method for expanding the spectral range of high power lasers, especially in the regime of near IR and middle IR. We report the SRS of high pressure H2 with a multiple-pass cell configuration. The SRS with the multiple-pass cell configuration is found to be very efficient for reduction of threshold of the first Stokes （S1）. Due to the coherent SRS （CSRS） process, the multiple-pass cell configuration is more effective for reduction of the threshold for the second Stokes （S2） SRS and for increasing the conversion efficiency of S2. This contributes to the relatively low conversion efficiency of S1 for the multiple-pass cell configuration. Multiple-pass cell SRS is also found to be very effective for improving the beam quality and the stability of S1.

Measurement of stimulated Brillouin scattering(SBS) threshold based on waveform variation of SBS optical limiting

This paper proposes a method for measuring the stimulated Brillouin scattering （SBS） threshold based on waveform variation of SBS optical limiting. The output waveforms for different pump power densities are numerically simulated, and validated in the Nd：YAG seed-injected laser system. The results indicate that SBS does not take place in the case of a low pump power density and thus the output power scales up linearly with pump power. Once the pump power density exceeds the SBS threshold, SBS takes place and thereby the energies are transferred from pump to Stokes. As a result, a small shoulder appears in the trailing edge of the output waveform, which provides another method to determine the SBS threshold.

Effect of Thermal Defocusing on Backward Stimulated Raman Scattering in CH4

The conversion efficiency of stimulated Raman scattering （SRS） in CH4 is studied by using a single longitudinal mode second-harmonic Nd：YAG laser （532 nm, linewidth 0.003 cm^-1, pulse-width （FWHM） 6.5 ns）. Due to the heat release from vibrationally excited particles, SRS processes often suffer from the thermal defocusing effect （TDE）. In view of 6.5 ns laser pulse width is much shorter than the vibrational relaxation time of CH4 molecules, TDE can only affect the SRS processes afterwards. In the cases of low laser repetition, TDE will be not serious, because it will be removed by the thermal diffusion in Raman medium before the next pulse arrives. At the laser repetition rate 2 Hz, CH4 pressure 1.1 MPa and pump laser energy 95 mJ, the quantum conversion efficiency of backward first-Stokes （BS1） has attained 73%. This represents the highest first-stokes conversion efficiency in CH4. Furthermore, due to the relaxation oscillation, the BS1 pulses are narrowed to about 1.2 ns. As a result, the BS1 peak power turns out to be 2.7 times that of the pump. Its beam quality is also much better and is only slightly affected by TDE. This reason is that BS1 represents a wave-front-reversed replica of the pump beam, which can compensate the thermal distortions in Raman amplify process. Under the same conditions, but pump laser repetition rate as 10 Hz, the conversion efficiency of BS1 goes down to 36% due to TDE. From this study, we expect that a well-behaved 630 nm Raman laser may be designed by using a closed CH4/He circulating-cooling system, which may have some important applications.

A simple model of suppressing stimulated Brillouin scattering in optical fiber with frequency-modulated laser

A simple model is developed to study the mechanism of stimulated Brillouin scattering（SBS） suppression with frequency-modulated laser in optical fiber. By taking into account the laser frequency distribution along the fiber induced by frequency modulation, the average effective Brillouin gain is calculated to determine the SBS threshold. Experimental results show agreement with the numerical analysis. The application for SBS suppression in interferometric fiber sensing system is also discussed in this paper. The results show that the maximum input power can be increased effectively by frequency modulation method.

Investigation on the effect of beam divergence angle upon output waveform based on stimulated Brillouin scattering optical limiting

This paper investigates the effect of beam divergence angle on output waveform based on stimulated Brillouin scattering optical limiting.Output waveforms in the case of different pump divergence angles are numerically simulated,and validated in a Nd：YAG seed-injected laser system.The results indicate that a small pump divergence angle can lead to good interaction between pump and Stokes,and a platform can be easily realized in the transmitted waveform.In contrast,a peak followed by the platform appears when the divergence angle becomes large.

Effect of water temperature on pulse duration and energy of stimulated Brillouin scattering

The water temperature has a strong effect on the kinematic viscosity, which is inversely proportional to the phonon lifetime and the gain coefficient. The higher the temperature is, the smaller the kinematic viscosity is, and the larger the phonon lifetime is. At a low pump power and a short focal length, we can derive a single-peak stimulated Brillouin scattering （SBS） pulse. The duration of this single-peak SBS pulse depends mainly on the phonon lifetime of water. With the increase of the water temperature, the duration of such a single-peak SBS pulse will become longer, and the SBS energy will become higher for the gain coefficient, which is related to the phonon lifetime. Therefore, varying the medium temperature can lead to the changes of SBS pulse duration and SBS energy.

Effect of stimulated Brillouin scattering on the gain saturation of distributed fiber Raman amplifier and its suppression by phase modulation

For distributed fiber Raman amplifiers（DFRAs）, stimulated Brillouin scattering（SBS） can deplete the pump once occurring and consequently generate gain saturation. On the basis of such a theory, theoretical gain saturation powers in DFRAs with various pump schemes are obtained by calculating SBS thresholds in them, and the experimental results show that they are in excellent agreement with the calculation results. The saturation power of the DFRA with a 300 m W forward pump is as low as 0 d Bm, which needs to be enhanced by phase modulation, and the effect is quantitatively studied. A simple model taking both modulation frequency and index into consideration is presented by introducing a correction factor to evaluate the effect of phase modulation on the enhancement of saturation power. Experimentally, it is shown that such a correction factor decreases as the modulation frequency increases and approaches zero when the modulation frequency becomes high enough. In particular, a phase modulation with a modulation frequency of 100 MHz and a modulation index of 1.380 can enhance the saturation power by 4.44 d B, and the correction factor is 0.25 d B, in which the modulation frequency is high enough. Additionally, the factor is 1.767 d B for the modulation frequency of 25 MHz. On this basis,phase modulations with various indexes and a fixed frequency of 25 MHz are adopted to verify the modified model, and the results are positive. To obtain the highest gain saturation power, the model is referable. The research results provide a guide for the design of practical DFRAs.

Investigation of stimulated Raman scattering in longitudinal magnetized plasma by theory and kinetic simulation

Stimulated Raman scattering(SRS)in a longitudinal magnetized plasma is studied by theoretical analysis and kinetic simulation.The linear growth rate derived via one-dimensional fluid theory shows the dependence on the plasma density,electron temperature,and magnetic field intensity.One-dimensional particle-in-cell simulations are carried out to examine the kinetic evolution of SRS under low magnetic intensity of w_c/w_0<0.01.There are two density regions distinguished in which the absolute growth of enveloped electrostatic waves and spectrum present quite different characteristics.In a relatively low-density plasma(ne~0.20 nc),the plasma wave presents typical absolute growth and the magnetic field alleviates linear SRS.While in the plasma whose density is near the cut-off point(ne~0.23 nc),the magnetic field induces a spectral splitting of the backscattering and forward-scattering waves.It has been observed in simulations and verified by theoretical analysis.Due to this effect,the onset of reflectivity delays,and the plasma waves form high-frequency oscillation and periodic envelope structure.The split wavenumber Dk/k0 is proportional to the magnetic field intensity and plasma density.These studies provide novel insight into the kinetic behavior of SRS in magnetized plasmas.

Suppression of auto-resonant stimulated Brillouin scattering in supersonic flowing plasmas by different forms of incident lasers

In supersonic flowing plasmas,the auto-resonant behavior of ion acoustic waves driven by stimulated Brillouin backscattering is self-consistently investigated.A nature of absolute instability appears in the evolution of the stimulated Brillouin backscattering.By adopting certain form of incident lights combined by two perpendicular linear polarization lasers or polarization rotation lasers,the absolute instability is suppressed significantly.The suppression of auto-resonant stimulated Brillouin scattering is verified with the fully kinetic Vlasov code.

Effects of Landau damping and collision on stimulated Raman scattering with various phase-space distributions

Stimulated Raman scattering(SRS)is one of the main instabilities affecting success of fusion ignition.Here,we study the relationship between Raman growth and Landau damping with various distribution functions combining the analytic formulas and Vlasov simulations.The Landau damping obtained by Vlasov-Poisson simulation and Raman growth rate obtained by Vlasov-Maxwell simulation are anti-correlated,which is consistent with our theoretical analysis quantitatively.Maxwellian distribution,flattened distribution,and bi-Maxwellian distribution are studied in detail,which represent three typical stages of SRS.We also demonstrate the effects of plateau width,hot-electron fraction,hot-to-cold electron temperature ratio,and collisional damping on the Landau damping and growth rate.They gives us a deep understanding of SRS and possible ways to mitigate SRS through manipulating distribution functions to a high Landau damping regime.

Simulations of Stimulated Raman Scattering in Low-Density Plasmas

Stimulated Raman particle-in-cell （PIC） simulations scattering （SRS） in a low-density The backward stimulated Raman plasma slab is investigated by scattering （B-SRS） dominates initially and erodes the head of the pump wave, while the forward stimulated Raman scattering （F-SRS） subsequently develops and is located at the rear part of the slab. Two-stage electron acceleration may be more efficient due to the coexistence of these two instabilities. The B-SRS plasma wave with low phase velocities can accelerate the background electrons which may be further boosted to higher energies by the F-SRS plasma wave with high phase velocities. The simulations show that the peaks of the main components in both the frequency and wave number spectra occur at the positions estimated from the phase-matching conditions.

Bursting behaviours in cascaded stimulated Brillouin scattering

Stimulated Brillouin scattering is studied by numerically solving the Vlasov Maxwell system. A cascade of stim- ulated Brillouin scattering can occur when a linearly polarized laser pulse propagates in a plasma. It is found that a stimulated Brillouin scattering cascade can reduce the scattering and increase the transmission of light, as well as intro- duce a bursting behaviour in the evolution of the laser-plasma interaction. The bursting time in the reflectivity is found to be less than half the ion acoustic period. The ion temperature can affect the stimulated Brillouin scattering cascade, which can repeat several times at low ion temperatures and can be completely eliminated at high ion temperatures. For stimulated Brillouin scattering saturation, higher-harmonic generation and wave wave interaction of the excited ion acoustic waves can restrict the amplitude of the latter. In addition, stimulated Brillouin scattering cascade can restrict. the amplitude of the scattered light.

Distributed analysis of forward stimulated Brillouin scattering for acoustic impedance sensing by extraction of a 2nd-order local spectrum

Distributed fiber sensors based on forward stimulated Brillouin scattering(F-SBS)have attracted special attention because of their capability to detect the acoustic impedance of liquid material outside fiber.However,the reported results were based on the extraction of a 1st-order local spectrum,causing the sensing distance to be restricted by pump depletion.Here,a novel post-processing technique was proposed for distributed acoustic impedance sensing by extracting the 2nd-order local spectrum,which is beneficial for improving the sensing signal-to-noise ratio(SNR)significantly,since its pulse energy penetrates into the fiber more deeply.As a proof-of-concept,distributed acoustic impedance sensing along~1630 m fiber under moderate spatial resolution of~20 m was demonstrated.

Analysis of stimulated Brillouin scattering in multi-mode fiber by numerical solution

Stimulated Brillouin scattering in optical fibers is described by a theoretical model and numerical analysis. The results showed that, for an optical fiber pumped by a laser beam with ns-order-pulse width and kW-order peak-power, SBS reflectivity tends to saturate when the fiber length exceeds a limit, named 'effective fiber length'. Using small core-diameter and long enough fiber, the SBS reflectivity level could be raised but is limited by optical damage of the entrance surface of the fiber. Therefore, just a small dynamic range can be obtained.