Straight and twisted Weyl nodal line phonons in Ho2CF2 material

Based on first-principles calculations, symmetry analysis and model construction, we predict that Ho2CF2hosts both straight and twisted Weyl nodal lines in its bulk phonon spectrum. We identify that the top two phonon bands entangle with each other, forming two straight Weyl nodal lines on the K–H and K′–H′paths at the Brillouin zone(BZ) boundary,and six twisted Weyl nodal lines within the BZ. All the Weyl nodal lines along the kz direction and across the entire BZ.The symmetry analysis indicates that these Weyl nodal lines are protected by the PT symmetry and crystal symmetry. The Berry phase and drumhead-like nontrivial surface states are calculated. We also construct a tight-binding model to describe these nodal lines. Our work provides an excellent material platform for exploring the fascinating physics associated with straight and twisted Weyl nodal line phonons.

Crossing Limit Cycles of Planar Piecewise Hamiltonian Systems with Linear Centers Separated by Two Parallel Straight Lines

In this paper, we have studied several classes of planar piecewise Hamiltonian systems with three zones separated by two parallel straight lines. Firstly, we give the maximal number of limit cycles in these classes of systems with a center in two zones and without equilibrium points in the other zone (or with a center in one zone and without equilibrium points in the other zones). In addition, we also give examples to illustrate that it can reach the maximal number.

Design of Compliant Straight-line Mechanisms Using Flexural Joints

Straight-line compliant mechanisms are important building blocks to design a linear-motion stage, which is very useful in precision applications. However, only a few configurations of straight-line compliant mechanisms are applicable. To construct more kinds of them, an approach to design large-displacement straight-line flexural mechanisms with rotational flexural joints is proposed, which is based on a viewpoint that the straight-line motion is regarded as a compromise of rigid and compliant parasitic motion of a rotational flexural joint. An analytical design method based on the Taylor series expansion is proposed to quickly obtain an approximate solution. To illustrate and verify the proposed method, two kinds of flexural joints, cross-axis hinge and leaf-type isosceles-trapezoidal flexural（LITF） pivot are used to reconstruct straight-line flexural mechanisms. Their performances are obtained by analytic and FEA method respectively. The comparisons of the results show the accuracy of the approach. Both examples show that the proposed approach can convert a large-deflection flexural joint into approximate straight-line mechanism with a high linearity that is higher than 5 000 within 5 man displacement. This can lead to a new way to design, analyze or optimize straight-line flexure mechanisms.

Study on Forced Straight-Line Guidance for the Final Translation Phase of Spacecraft Rendezvous

Aimed at the problem of final translation of space rendezvous for the applications such as docking,inspection and tracking,optimal straight-line guidance algorithm based on pulse/continuous low-thrust in the context of Clohessy-Wiltshire dynamics is proposed.Two modes of guidance strategy:varying-speed and fixed-speed approaching scheme for V-bar and R-bar approach by using constant/finite low-thrust propulsion respectively are studied,and the corresponding fuel-optimal conditions are obtained.Numerical simulation is conducted to verify and test the proposed algorithms.The results show that there is generally no different between the fuel consumptions by using the two different approaching modes for V-bar case.However,the conclusion for Rbar case is different that the using of continuous low-thrust cost more fuel and transfer time.

Riemann Boundary Value Problem of Non-Normal Type on the Infinite Straight Line

Various kinds of Riemann boundary value problems (BVPs) for analytic functions on closed curves or on open arc, doubly periodic Riemann BVPs, doubly quasi-periodic Riemann BVPs, and BVPs for polyanalytic functions have been widely investigated in [1-8]. The main ap- proach is to use the decomposition of polyanalytic functions and their generalization to transform the boundary value problems to their corresponding boundary value problems for analytic functions. Recently, inverse Riemann BVPs for generalized analytic functions or bianalytic functions have been investigated in [9-12]. In this paper, we consider a kind of Riemann BVP of non-normal type on the infinite straight line and discuss the solvable conditions and the general solution for it.

Straight line feature based image distortion correction

An image distortion correction method is proposed, which uses the straight line features. Many parallel lines of different direction from different images were extracted, and then were used to optimize the distortion parameters by nonlinear least square. The thought of step by step was added when the optimization method working. 3D world coordination is not need to know, and the method is easy to implement. The experiment result shows its high accuracy.

A New Proposal to Adjust a Straight Line to a Normal Q-Q Plot

In this paper a new proposal of a straight line, the ＂modified Tukey＇s line＂, for fitting to a normal quantile-quantile Plot, or normal Q-Q plot, is presented. This probability plot allows us to determine whether a set of sample observations is distributed according to a normal distribution. For this, the sample quantiles are represented against the quantiles of a theoretical probability model, which in this case is the normal distribution. If the data set follows the above mentioned distribution, the plotted points will have a rectilinear configuration. To verify this, there are different alternatives for fitting a straight line to the plotted points. Among the straight lines which can be fitted to a Q-Q plot, in this paper, besides the proposed straight line, the following straight lines are considered： straight line that passes through the first and third quartiles, straight line that passes through the 10th and 90th percentiles, straight line fitted by the method of least squares, straight line with slope s and constant the average of the data set, Theil＇s line and Tukey＇s line. In addition, an example, in which there are represented the different straight lines considered and the proposed straight line on a normal Q-Q plot obtained for the same set of observations, is developed. In this example the existing differences among the straight lines are observed.

A New Method for Locating Calculation of Arbitrary Spatial Straight Line or Plane in NC Machining

In the manufacturing process, we often encounter so me location machining of space arbitrary straight lines and planes that are not on ly unparalleled but also not vertical with the machine tool spindle or the cutti ng tool. In the past, we can do the location machining through the methods of dr awing line and making level in the ordinary machine tool. In the numerical contr ol machining of the CNC machine tool and manufacturing center, however, the spac e location and angle of the arbitrary straight lines and planes must be precisel y calculated in advance. So that precisely locating can be guaranteed in machini ng. Therefore, how to work out the space location angle of the arbitrary straigh t lines and planes to be machined both conveniently and precisely, turns out to be the must-be-solved chief problem in the numerical control machining. In thi s paper, through the deeply research of this problem, a new kind of calculating formula that calculates and defines the space location angle of the arbitrary st raight lines and planes by using the methods of analytic calculating. The formul a has been applied in the practical manufacturing calculation. It is proved that the new space angle calculating methods of arbitrary straight lines and planes is convenient in calculating and precise in locating. And it provides us a n ew, brief and precise calculating method in the numerical control machining of t he numerical control machine tool and manufacturing center.

Generation of Superpositions of Coherent Interaction States Along a Straight Line via Raman Interaction

We present an alternative scheme for preparing the superpositions of coherent states along a straight line of a cavity field using degenerate atom-cavity field Raman interaction. In the scheme, a collection of A-type three-level atoms is orderly sent through the cavity to interact with the cavity field adjusted by a microwave source connected to it, followed by state-selective measurements. In this way, we can prepare the superpositions of several coherent states along a straight line with arbitrary weighting factors for the cavity field. In the scheme, the coherence of the atom-cavity system may be maintained and the second microwave field is unnecessary, which is prior to the previous scheme.

Type Synthesis of Spatial Straight Line Mechanisms with only Revolute Joints

Spatial straight line mechanisms are a class of spatial mechanisms whose end-effectors generate the trajectory with the form of exact straight lines, which have potential applications in many industrial sectors. This study aims to synthesis the spatial straight line mechanisms with only revolute joints, meaning that no prismatic joints are included. According to the generalized function sets and the law of one dimensional rotation, the type of compositions of characteristic and the corresponding conditions are derived. Furthermore, some novel symmetrical and asymmetrical spatial straight line mechanisms are synthesized through assembling specific kinematic chains under the corresponding conditions. Finally, several synthesized spatial straight line mechanisms are illustrated to show the effectiveness of the synthesis methodology.

Length optimization of straight line connecting turnout on main line in high-speed railway station yard

Taking the development of high-speed railway in China as background, and referring to the dynamic theory and wheel-rail contact mode, dynamic analysis model was established, considering the setting position of straight lines and running conditions of train in high-speed railway station yard. Using the established model, and choosing vehicle lateral acceleration and wheel suspension as the evaluation indexes, dynamic characteristic of vehicle traveling in turnout and adjacent area on main line was analyzed, and effects on travelling safety and stability of train aroused by length variation of straight lines were calculated based on analyzing the damping rules of vibration. The results show that, a certain length of straight lines can alleviate the vibration aroused in turnout and curve(turnout), length of straight lines connecting turnouts in different sections on main line was proposed to meet the demand of traveling stability, and shortening or cancelation of straight line for the scale limitation of station yard has less influence on operation safety of train.

Study on Numerical Comparison Method of Four-bar Straight-line Guidance Mechanism

In order to solve four-bar straight-line guidance mechanism synthesis problem for the arbitrarily given straight-line’s"angle requirement"and"point-position requirement",a numerical comparison synthesis method for single and double straight-line guidance mechanism is presented,which is convenient to realize by computer program.The basic idea of this method is:to select a four-bar linkage whose relative bar length of crank is 1 as a basic four-bar linkage.Then the other three relative bars’length is changed,and a lot of basic four-bar linkage can be obtained.There are many single and double ball-points of each basic four-bar linkage.With the motion of a basic four-bar linkage,there is straight-line segment of each Ball-point’s path.The data of these basic four-bar linkages is saved to a database.When designing a four-bar straight-line guidance mechanism,the design data is compared with the data in database and a satisfactory four-bar linkage can be obtained.The method effectively solves the straight-line guidance mechanism synthesis problem.

Hilbert Boundary Value Problem with an Unknown Function on Arbitrary Infinite Straight Line

We consider a Hilbert boundary value problem with an unknown parametric function on arbitrary infinite straight line passing through the origin. We propose to transform the Hilbert boundary value problem to Riemann boundary value problem, and address it by defining symmetric extension for holomorphic functions about an arbitrary straight line passing through the origin. Finally, we develop the general solution and the solvable conditions for the Hilbert boundary value problem.

Influence of the Fitted Straight Line for Confidence Bands Algorithm in Q-Q Plots

Confidence bands in a Normal Q-Q Plot allow us to detect non-normality of a data set rigorously, and in such a way that the conclusion does not depend on the subjectivity of the observer of the graph. In the construction of the graph, it is usual to fit a straight line to the plotted points, which serves both to check the hypothesis of normality (linear configuration of the plotted points) and to produce estimates of the parameters of the distribution. We can opt for dif-ferent types of lines. In this paper, we study the influence of five types of fitted straight lines in a Normal Q-Q Plot used for construction the confidence bands based on the exact distribution of the order statistics.

Document Clustering with Evolutionary Systems through Straight-Line Programs “<i>slp</i>”

In this paper, we show a clustering method supported on evolutionary algorithms with the paradigm of linear genetic programming. “The Straight-Line Programs (slp)”, which uses a data structure which will be useful to represent collections of documents. This data structure can be seen as a linear representation of programs, as well as representations in the form of graphs. It has been used as a theoretical model in Computer Algebra, and our purpose is to reuse it in a completely different context. In this case, we apply it to the field of grouping library collections through evolutionary algorithms. We show its efficiency with experimental data we got from traditional library collections.

On the Existence of Non-Intersecting Straight Lines on the Plane

In this brief note, we adduce the logical rationale that if at least one infinite straight line non-intersecting with the given straight line passes through a given point not lying on a given straight line, then it must be unique.

基于模糊快速滑模的农用牵引车辆直线路径跟踪控制

为解决无人驾驶牵引式农机在非结构化环境中作业时直线跟踪精度低、上线速度慢、抗干扰能力差等问题,提出了一种基于模糊快速滑模控制的农用牵引式车辆直线路径跟踪控制方法。首先利用车辆运动学模型与参考路径建立牵引车辆直线路径跟踪误差模型,并提出一种基于模糊参数整定的快速滑模直线路径跟踪方法,解决了滑模控制算法的控制器抖振与机具快速上线问题。通过Lyapunov稳定性分析可知,所设计控制方法可保证牵引机具跟踪参考路径,同时铰接角收敛至零。最后,基于Simulink仿真与实车试验对该控制方法的有效性与优越性进行测试。田间实车试验表明,使用本文控制方法时,拖车和挂车最大路径跟踪横向误差分别为0.11、0.12 m,拖车和挂车跟踪误差方差分别为0.0013、0.0015 m^(2);相较于传统基于等速趋近律设计的滑模控制器,上线时间提升约58%,最大跟踪误差减小约66%。

基于稀疏编码的复杂机械振动信号盲分离方法

复杂机械振动信号激励源较多,故源信号之间互为相关源,且较难满足统计独立特性,导致传统盲源分离方法分离效果不佳。对此,提出一种基于信号稀疏编码的机械振动信号盲分离方法。盲源分离的关键在于对混合矩阵的精确估计,然而机械振源中相关成分的存在严重影响混合矩阵的估计。对此,首先对观测信号进行短时傅里叶变换,增加信号稀疏性;然后利用稀疏编码筛选出具备直线聚类特性的时频观测点,利用K均值(K-means)聚类法找到聚类中心;最后利用所提筛选规则找到估计的混合矩阵,重构出源信号。通过对往复压缩机故障数据的分析,验证了所提方法有效性。

基于直线检测的航向角误差校正方法

提出了一种基于直线检测模型的多传感器数据融合航向角随机误差校正方法,旨在提高农林环境下低成本传感器组成的定位平台的精度。该方法通过调整直线检测阈值来实现状态的动态调整,以提高导航系统的鲁棒性和精确性。再将多传感器数据通过卡尔曼滤波融合,实现航向角随机误差的校正。试验结果表明,该方法在不同路径和速度下能有效降低航向角误差提高定位精度。在直线行进试验中,本方法的定位精度保持在5cm以内,航向角误差在5°以内。在矩形行进试验中,本方法的轨迹与差分RTK方法相近,平均误差仅为2.7cm,标准差为3.9cm。这一航向角校正方法为农业机械和车辆环境中的自主操作提供了有力支持。它能够适应不同的环境条件,提高导航系统的性能和测量准确性。

大尺寸工件螺孔的机器视觉测量方法研究

基于3C产品外壳工件螺纹圆孔加工时通常采用角点定位的特点,利用线阵相机采集子图像的连续性,提出基于直线特征和圆特征定位的螺纹圆孔位置尺寸测量方法。基于拟合法改进的Hough直线定位方法和基于乘同余法改进Hough变换圆形检测方法,实现3C外壳工件图像边缘定位及螺纹圆孔的圆心坐标提取及直径尺寸测量;基于图像的连续性,采用子图像逐一检测,相邻子图像起始像素累加的方式,实现大尺寸图像螺纹圆孔尺寸全局检测。上述方法最终实现大尺寸3C外壳工件螺纹圆孔的位置尺寸测量精度为±0.2220mm和孔径大小测量±0.0904mm,单工件检测耗时为33.737s。