The existing researches on the damping wheel mainly focus on investigating the influence of damping structure change on the vibro-acoustic control.The changes include the geometric size of the damping structure,the da...The existing researches on the damping wheel mainly focus on investigating the influence of damping structure change on the vibro-acoustic control.The changes include the geometric size of the damping structure,the damping material parameters,and the placement,and so on.In order to further understand the mechanism in reducing the acoustic radiation of railway wheel with layer damping treatment,in this paper,the wheel is simply modified by a full-sized circular plate.The circle plate side has stuck circumference constrained damping ridges and radial constrained damping ridges on it.Based on a hybrid finite element method-boundary element method（FEM-BEM）,the paper develops a vibro-acoustic radiation model for such a distributed constrained damping structure.The vibration and acoustic radiation of the circular plate is analyzed.In the analysis,the dynamic response of the system is obtained by using the 3D finite model superposition method.The obtained vibration response is used as the initial boundary condition in solving Helmholtz boundary integral equation for the sound radiation analysis.In the procedure,firstly,the modal analysis of the circular plate is performed to get the distribution of the system modal strain energy.Secondly,the vibro-acoustic radiation characteristics of the plate with different kinds of circumference damping ridges and radial damping ridges are compared in order to try to find the best effective damping ridge structure.Thirdly,using the distribution of the plate modal strain energy investigates the effect of the ridge distribution locations on the circular plate on its vibro-acoustic radiation.The calculation and analysis research results show that,the sticking circumference and radial damping ridges on the plate can control the vibro-acoustic radiation of the plate effectively in different frequency range.The distribution of the constrained damping ridge has an effect on reduction in vibro-acoustic radiation of the circular plate.The present research is very useful in the design of railway wheel with low noise level.展开更多
The development of robust damage detection methods for offshore structures is crucial to prevent catastrophes caused by structural failures. In this research, we developed an Improved Modal Strain Energy （IMSE） meth...The development of robust damage detection methods for offshore structures is crucial to prevent catastrophes caused by structural failures. In this research, we developed an Improved Modal Strain Energy （IMSE） method for detecting damage in offshore platform structures based on a traditional modal strain energy method （the Stubbs index method）. The most significant difference from the Stubbs index method was the application of modal frequencies. The goal was to improve the robustness of the traditional method. To demonstrate the effectiveness and practicality of the proposed IMSE method, both numerical and experimental studies were conducted for different damage scenarios using a jacket platform structure. The results demonstrated the effectiveness of the IMSE method in damage location when only limited, spatially incomplete, and noise-polluted modal data is available. Comparative studies showed that the IMSE index outperformed the Stubbs index and exhibited stronger robustness, confirming the superiority of the proposed approach.展开更多
Plate structures are employed as important structural components in many engineering applications. Hence, assessing the structural conditions of in-service plate structures is critical to monitoring global structural ...Plate structures are employed as important structural components in many engineering applications. Hence, assessing the structural conditions of in-service plate structures is critical to monitoring global structural health. Modal curvature-based damage detection techniques have recently garnered considerable attention from the research community, and have become a promising vibration-based structural health monitoring solution. However, computing errors arise when calculating modal curvatures from lateral mode shapes, which result from unavoidable measurement errors in the mode shapes as identified from lateral vibration signals; this makes curvature-based algorithms that use a lateral measurement only theoretically feasible, but practically infeasible. Therefore, in this study, long-gauge fiber Bragg grating strain sensors are employed to obtain a modal curvature without a numerical differentiation procedure in order to circumvent the computing errors. Several damage indices based on modal curvatures that were developed to locate beam damage are employed. Both numerical and experimental studies are performed to validate the proposed approach. However, although previous studies have reported relative success with the application of these damage indices on a simple beam, only one damage index demonstrated the capability to locate damage when the stiffness of the local region changed near the sensor.展开更多
Dynamical performance of pipes conveying fluid on board is of great importance to the reliability of machinery.The dynamic equation of a simply supported wet pipe conveying fluid is presented,taking structural damping...Dynamical performance of pipes conveying fluid on board is of great importance to the reliability of machinery.The dynamic equation of a simply supported wet pipe conveying fluid is presented,taking structural damping of the pipe and viscidity of the fluid into consideration.And the equation is also solved by using Galerkin's method.Modal identifications based on strain gauge test are carried out on both dry pipes(without fluid in it) and wet pipes(pipes conveying fluid).It is concluded from the comparison of the results that both natural frequency and the damping ratio decrease as the pipe filled with fluid,but the mode shapes vary little.Variation of equivalent damping factor is also tested.Experimental results reveal that the equivalent damping factor of fluid and the damping ratio depend greatly on the initial deformation,and fluid induced damping decreases the universal damping ratio of the pipes conveying fluid.展开更多
基金supported by National Natural Science Foundation of China (Grant No. 50821063)Technological Research and Development Programs of Railway Ministry of China (Grant No. 2008J001-A,Grant No. 2009J001)Natural Science Foundation of State Key Laboratory of Traction Power,China (Grant No. 2008TPL-Z07)
文摘The existing researches on the damping wheel mainly focus on investigating the influence of damping structure change on the vibro-acoustic control.The changes include the geometric size of the damping structure,the damping material parameters,and the placement,and so on.In order to further understand the mechanism in reducing the acoustic radiation of railway wheel with layer damping treatment,in this paper,the wheel is simply modified by a full-sized circular plate.The circle plate side has stuck circumference constrained damping ridges and radial constrained damping ridges on it.Based on a hybrid finite element method-boundary element method（FEM-BEM）,the paper develops a vibro-acoustic radiation model for such a distributed constrained damping structure.The vibration and acoustic radiation of the circular plate is analyzed.In the analysis,the dynamic response of the system is obtained by using the 3D finite model superposition method.The obtained vibration response is used as the initial boundary condition in solving Helmholtz boundary integral equation for the sound radiation analysis.In the procedure,firstly,the modal analysis of the circular plate is performed to get the distribution of the system modal strain energy.Secondly,the vibro-acoustic radiation characteristics of the plate with different kinds of circumference damping ridges and radial damping ridges are compared in order to try to find the best effective damping ridge structure.Thirdly,using the distribution of the plate modal strain energy investigates the effect of the ridge distribution locations on the circular plate on its vibro-acoustic radiation.The calculation and analysis research results show that,the sticking circumference and radial damping ridges on the plate can control the vibro-acoustic radiation of the plate effectively in different frequency range.The distribution of the constrained damping ridge has an effect on reduction in vibro-acoustic radiation of the circular plate.The present research is very useful in the design of railway wheel with low noise level.
基金Supported by the National Natural Science Foundation of China （51209189, 51379196）, and the Natural Science Foundation of Shandong Province （ZR2013 EEQ006, ZR2011 EL049）
文摘The development of robust damage detection methods for offshore structures is crucial to prevent catastrophes caused by structural failures. In this research, we developed an Improved Modal Strain Energy （IMSE） method for detecting damage in offshore platform structures based on a traditional modal strain energy method （the Stubbs index method）. The most significant difference from the Stubbs index method was the application of modal frequencies. The goal was to improve the robustness of the traditional method. To demonstrate the effectiveness and practicality of the proposed IMSE method, both numerical and experimental studies were conducted for different damage scenarios using a jacket platform structure. The results demonstrated the effectiveness of the IMSE method in damage location when only limited, spatially incomplete, and noise-polluted modal data is available. Comparative studies showed that the IMSE index outperformed the Stubbs index and exhibited stronger robustness, confirming the superiority of the proposed approach.
文摘Plate structures are employed as important structural components in many engineering applications. Hence, assessing the structural conditions of in-service plate structures is critical to monitoring global structural health. Modal curvature-based damage detection techniques have recently garnered considerable attention from the research community, and have become a promising vibration-based structural health monitoring solution. However, computing errors arise when calculating modal curvatures from lateral mode shapes, which result from unavoidable measurement errors in the mode shapes as identified from lateral vibration signals; this makes curvature-based algorithms that use a lateral measurement only theoretically feasible, but practically infeasible. Therefore, in this study, long-gauge fiber Bragg grating strain sensors are employed to obtain a modal curvature without a numerical differentiation procedure in order to circumvent the computing errors. Several damage indices based on modal curvatures that were developed to locate beam damage are employed. Both numerical and experimental studies are performed to validate the proposed approach. However, although previous studies have reported relative success with the application of these damage indices on a simple beam, only one damage index demonstrated the capability to locate damage when the stiffness of the local region changed near the sensor.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51179102)
文摘Dynamical performance of pipes conveying fluid on board is of great importance to the reliability of machinery.The dynamic equation of a simply supported wet pipe conveying fluid is presented,taking structural damping of the pipe and viscidity of the fluid into consideration.And the equation is also solved by using Galerkin's method.Modal identifications based on strain gauge test are carried out on both dry pipes(without fluid in it) and wet pipes(pipes conveying fluid).It is concluded from the comparison of the results that both natural frequency and the damping ratio decrease as the pipe filled with fluid,but the mode shapes vary little.Variation of equivalent damping factor is also tested.Experimental results reveal that the equivalent damping factor of fluid and the damping ratio depend greatly on the initial deformation,and fluid induced damping decreases the universal damping ratio of the pipes conveying fluid.
