Specimen aspect ratio and progressive field strain development of sandstone under uniaxial compression by three-dimensional digital image correlation

The complete stress-strain characteristics of sandstone specimens were investigated in a series of quasistatic monotonic uniaxial compression tests.Strain patterns development during pre-and post-peak behaviours in specimens with different aspect ratios was also examined.Peak stress,post-peak portion of stress-strain,brittleness,characteristics of progressive localisation and field strain patterns development were affected at different extents by specimen aspect ratio.Strain patterns of the rocks were obtained by applying three-dimensional(3D) digital image correlation(DIC) technique.Unlike conventional strain measurement using strain gauges attached to specimen,3D DIC allowed not only measuring large strains,but more importantly,mapping the development of field strain throughout the compression test,i.e.in pre-and post-peak regimes.Field strain development in the surface of rock specimen suggests that strain starts localising progressively and develops at a lower rate in pre-peak regime.However,in post-peak regime,strains increase at different rates as local deformations take place at different extents in the vicinity and outside the localised zone.The extent of localised strains together with the rate of strain localisation is associated with the increase in rate of strength degradation.Strain localisation and local inelastic unloading outside the localised zone both feature post-peak regime.

Structural,^(40)Ar/^(39)Ar Geochronological and Rheological Feature Analysis of the Guoxuepu Shear Zone:Indications for the Jitang Metamorphic Complex in the Northern Lancangjiang Zone

The Jitang metamorphic complex is key to studying the tectonic evolution of the Northern Lancangjiang zone.Through structural-lithological mapping,structural analysis and laboratory testing,the composition of the Jitang metamorphic complex was determined.The macro-and microstructural analyses of the ductile detachment shear zone(Guoxuepu ductile shear zone,2–4 km wide)between the metamorphic complex and the overlying sedimentary cap show that the shear sense of the ductile shear zones is top-to-the-southeast.The presence of various deformation features and quartz C-axis electron backscatter diffraction(EBSD)fabric analysis suggests multiple deformation events occurring at different temperatures.The average stress is 25.68 MPa,with the strain rates(έ)ranging from 9.77×10^(−14)s^(−1)to 6.52×10^(−16)s^(−1).The finite strain of the Guoxuepu ductile shear zone indicates an elongated strain pattern.The average kinematic vorticity of the Guoxuepu ductile shear zone is 0.88,implying that the shear zone is dominated by simple shear.The muscovite selected from the protomylonite samples in the Guoxuepu ductile shear zone yields a 40Ar-39Ar age of 60.09±0.38 Ma.It is suggested that,coeval with the initial Indo–Eurasian collision,the development of strike-slip faults led to a weak and unstable crust,upwelling of lower crust magma,then induced the detachment of the Jitang metamorphic complex in the Eocene.

Genetic Diversity and Global Distribution of Citrus tristeza virus (CTV) Strains

Citrus tristeza virus （CTV）, the most devastating viral pathogen in citrus, causes tremendous economic losses to citrus industry worldwide. The CTV isolates exhibit variable pathogenicities on their hosts indicating a mixed population of the CTV in nature. Several fragments within the CTV genome have been used for studying the genetic diversity of the CTV, however, the best region for rapid the CTV strain differentiation is still absent at present. In present study, a systemic analysis was carried out to evaluate the best region within the CTV genome for rapid CTV strain differentiation. Results of our study showed that the major coat protein （CP） coding region was the best region for this purpose. Using pair-wise distance frequency distribution plot, a reasonable genetic distance cut-off value was set for the CTV CP gene for the CTV strain differentiation. Using this criterion, eight CTV strains, including seven well characterized and a new strain, were successfully differentiated using 537 CTV isolates reported from 38 countries. The global strain distribution pattern was then determined and discussed. Our results also provided a new insight into the evolution and spreading of the virus, as well as the information for developing proper disease management strategy.

POLARIZED SHEARING HOLOGRAPHIC-MOIR INTERFEROMETRY

A new holographic-moirè method is presented to obtain the in-plane strain fringe patterns. During the recording,double object beams and dual reference beams of orthogonally polarized state are used to illuminate the object and the holographic plate,respectively.Two carriers modulated by deformation are obtained through double-exposure or in real time.Pure in-plane displacement derivative patterns are then obtained through twice filtering.

Experimental study on distribution of serotypes and antimicrobial patterns of Group B streptococcus strains

Objective To obtain information on the distribution of serotypes and antimicrobial agent susceptibilities to group B streptococcus (GBS) strains isolated in Beijing area from 1991 to 1996. Methods Bacterial isolates of GBS were obtained from vaginal and cervical tract of pregnant and nonpregnant women in Beijing Tian Tan Hospital by culture. A total of 76 GBS strains were identified finally by coagglutination. Serotyping was determined by Standard Lancefield method. Susceptibility to test agents was assessed by determining the minimal inhibitory concentrations (MICs) with agar dilution method that was established by the National Committee for Clinical Laboratory Standards (NCCLS). Results Seven serotypes were identified among 76 GBS strains isolates. Types Ⅱ (33%), Ⅲ (23%) and Ⅰa (16%) were the predominant serotypes in pregnant and nonpregnant women. MICs of penicillin G and ampicillin were ≤0.06 μg/ml. MICs of cephazolin, cefuroxime and cefoperozone were 0.003 μg/ml 0.06 μg/ml. MICs of erythromycin were 0.003 μg/ml 0.03 μg/ml. MICs of gentamycin were 1 μg/ml 32 μg/ml. MICs of amikacin were 4 μg/ml ≥64 μg/ml, nearly 12.8% and 40.4% of the strains were resistant to gentamycin and amikacin, respectively. Conclusions Our study provides useful epidemiologic data for preparation of GBS type specific vaccines which can prevent GBS infections and antimicrobial agents susceptibility patterns in China. Routine reports on GBS susceptibilities by clinical laboratories and continuous surveillance for changes in the susceptibility are of considerable clinical importance.

Effect of Aramid/Carbon Hybrid on the Tensile Properties of Multilayered Biaxial Weft Knitted Fabric Reinforced Composites

The effects of aramid/carbon on tensile properties of multilayered biaxial weft knitted( MBWK) fabric reinforced composites are analyzed by experiments. The tensile tests are inducted by the SHIMADZU AG-250 KNE universal material testing machine and Aramis V6 digital image correlation( DIC) technique.More specifically,the composite samples own four hybrid ratios(Na∶ Nc= 12∶ 0,8 ∶ 4,6 ∶ 6 and 4 ∶ 8). The results showed that the aramid/carbon hybrid MBWK fabric reinforced composites showed nearly linear response until reaching the maximum load and the inserting yarns distribution on the surface of MBWK fabrics reinforced composites had a great influence on the strain pattern distribution. Besides,the tensile strength,the tensile modulus and the elongation at breakage of 0° samples and 90° samples increased with the decreasing of aramid/carbon hybrid ratio. In a word,the changes of tensile strength, tensile modulus and elongation at breakage have a lot to do with the difference of aramid/carbon hybrid ratio.

Modeling of strain and filtration properties of a semi-finished leather product

A study on deformation and filtration properties of a leather semi-finished product after chrome tanning are presented.The analytical dependences of compressive load on compressive(recovery)strain and moisture content of a leather semi-finished product are obtained.The empirical dependences of hydraulic gradient on filtration rates are determined for various compression ratios of the leather semi-finished product.It was revealed that with an increase in compressive load and moisture content of the leather semi-finished product,the compressive deformation increases.The shoulder section is subject to the greatest deformation,then the belly section and the least deformation is observed in the butt section.A linear relationship has been established between the hydraulic gradient and the rate of moisture filtration through the leather semi-finished product in the directions perpendicular and parallel to its surface.