Carbon-based nanomaterials cause toxicity by oxidative stress to the liver and brain in Sprague-Dawley rats

Carbon-based nanomaterials have important research significance in various disciplines,such as composite materials,nanoelectronic devices,biosensors,biological imaging,and drug delivery.Recently,the human and ecological risks associated with carbon-based nanomaterials have received increasing attention.However,the biological safety of carbon based nanomaterials has not been systematically studied.In this study,we used different types of carbon materials,namely,graphene oxide(GO),single-walled carbon nanotubes(SWCNTs),and multiwalled carbon nanotubes(MWCNTs),as models to observe their distribution and oxidative damage in vivo.The results of Histopathological and ultrastructural examinations indicated that the liver and lungs were the main accumulation targets of these nanomaterials.SR-μ-XRF analysis revealed that SWCNTs and MWCNTs might be present in the brain.This shows that the three types of carbon-based nanomaterials could cross the gas-blood barrier and eventually reach the liver tissue.In addition,SWCNTs and MWCNTs could cross the blood-brain barrier and accumulate in the cerebral cortex.The increase in ROS and MDA levels and the decrease in GSH,SOD,and CAT levels indicated that the three types of nanomaterials might cause oxidative stress in the liver.This suggests that direct instillation of these carbon-based nanomaterials into rats could induce ROS generation.In addition,iron(Fe)contaminants in these nanomaterials were a definite source of free radicals.However,these nanomaterials did not cause obvious damage to the rat brain tissue.The deposition of selenoprotein in the rat brain was found to be related to oxidative stress and Fe deficiency.This information may support the development of secure and reasonable applications of the studied carbon-based nanomaterials.

Carbon-based derivatives from metal-organic frameworks as cathode hosts for Li–S batteries

Lithium-sulfur batteries(Li–S batteries) are promising candidates for the next generation high-energy rechargeable Li batteries due to their high theoretical specific capacity(1672 m Ahg-1) and energy density(2500 Wh kg-1). The commercialization of Li–S batteries is impeded by several key challenges at cathode side, e.g. the insulating nature of sulfur and discharged products(Li2S 2 and Li2S), the solubility of long-chain polysulfides and volume variation of sulfur cathode upon cycling. Recently, the carbonbased derivatives from metal-organic frameworks(MOFs) has emerged talent in their utilization as cathode hosts for Li–S batteries. They are not only highly conductive and porous to enable the acceleration of Li +/e-transfer and accommodation of volumetric expansion of sulfur cathode during cycling, but also enriched by controllable chemical active sites to enable the adsorption of polysulfides and promotion of their conversion reaction kinetics. In this review, based on the types of MOFs(e.g. ZIF-8, ZIF-67, Prussian blue, Al-MOF, MOF-5, Cu-MOF, Ni-MOF), the synthetic methods, formation process and morphology, structural superiority of MOFs-derived carbon frameworks along with their electrochemical performance as cathode host in Li–S batteries are summarized and discussed.

Carbon-Based MOF Derivatives:Emerging Efficient Electromagnetic Wave Absorption Agents

To tackle the aggravating electromagnetic wave(EMW)pollution issues,high-efficiency EMW absorption materials are urgently explored.Metal-organic framework(MOF)derivatives have been intensively investigated for EMW absorption due to the distinctive components and structures,which is expected to satisfy diverse application requirements.The extensive developments on MOF derivatives demonstrate its significantly important role in this research area.Particularly,MOF derivatives deliver huge performance superiorities in light weight,broad bandwidth,and robust loss capacity,which are attributed to the outstanding impedance matching,multiple attenuation mechanisms,and destructive interference effect.Herein,we summarized the relevant theories and evaluation methods,and categorized the state-of-the-art research progresses on MOF derivatives in EMW absorption field.In spite of lots of challenges to face,MOF derivatives have illuminated infinite potentials for further development as EMW absorption materials.

Multifunctional roles of carbon-based hosts for Li-metal anodes:A review

With its high theoretical capacity,lithium(Li)metal is recognized as the most potential anode for realizing a high-performance energy storage system.A series of questions(severe safety hazard,low Coulombic efficiency,short lifetime,etc.)induced by uncontrollable dendrites growth,unstable solid electrolyte interface layer,and large volume change,make practical application of Li-metal anodes still a threshold.Due to their highly appealing properties,carbon-based materials as hosts to composite with Li metal have been passionately investigated for improving the performance of Li-metal batteries.This review displays an overview of the critical role of carbon-based hosts for improving the comprehensive performance of Li-metal anodes.Based on correlated mainstream models,the main failure mechanism of Li-metal anodes is introduced.The advantages and strategies of carbon-based hosts to address the corresponding challenges are generalized.The unique function,existing limitation,and recent research progress of key carbon-based host materials for Li-metal anodes are reviewed.Finally,a conclusion and an outlook for future research of carbon-based hosts are presented.This review is dedicated to summarizing the advances of carbon-based materials hosts in recent years and providing a reference for the further development of carbonbased hosts for advanced Li-metal anodes.

Reaction Kinetics of Biodiesel Synthesis from Waste Oil Using a Carbon-based Solid Acid Catalyst

The kinetics of simultaneous transesterification and esterification with a carbon-based solid acid catalyst was studied.Two solid acid catalysts were prepared by the sulfonation of carbonized vegetable oil asphalt and petroleum asphalt.These catalysts were characterized on the basis of elemental analysis,acidity site concentration,the Brunauer-Emmett-Teller（BET）surface area and pore size.The kinetic parameters with the two catalysts were determined,and the reaction system can be described as a pseudo homogeneous catalyzed reaction.All the forward and reverse reactions follow second order kinetics.The calculated concentration values from the kinetic equations are in good agreement with experimental values.

Structure and denitration performance of carbon-based catalysts prepared from Cu-BTC precursor

Using Cu-BTC prepared by hydrothermal method as precursor, carbon-based catalysts were obtained as model materials for low-temperature DeNO_x. These catalysts were characterized by X-ray diffractometry（XRD）, Raman spectroscopy, scanning electron microscopy（SEM） and energy dispersive X-ray spectrometry（EDS）. The results showed that all carbon-based catalysts held the octahedron shape of Cu-BTC in most parts, and they mainly consisted of face-centered cubic copper. CuO_x/C exhibited excellent catalytic activity, and such catalytic activity was further improved with the introduction of Ag. The catalyst with a Cu to Ag mole ratio of 6：1 and an activated temperature of 600 °C showed the best catalytic performance, and its catalytic denitration rate reached 100% at a temperature as low as 235 °C. During the catalytic reaction process, Cu~＋ mainly played a catalytic role.

Carbon-Based Flexible and All-Solid-State Micro-supercapacitors Fabricated by Inkjet Printing with Enhanced Performance

By means of inkjet printing technique, flexible and all-solid-state micro-supercapacitors(MSCs) were fabricated with carbon-based hybrid ink composed of graphene oxide(GO,98.0vol.%) ink and commercial pen ink(2.0vol.%). A small amount of commercial pen ink was added to effectively reduce the agglomeration of theGO sheets during solvent evaporation and the following reduction processes in which the presence of graphite carbon nanoparticles served as nano-spacer to separate GO sheets. The printed device fabricated using the hybrid ink,combined with the binder-free microelectrodes and interdigital microelectrode configuration, exhibits nearly 780%enhancement in areal capacitance compared with that of pure GO ink. It also shows excellent flexibility and cycling stability with nearly 100% retention of the areal capacitance after 10,000 cycles. The all-solid-state device can be optionally connected in series or in parallel to meet the voltage and capacity requirements for a given application.This work demonstrates a promising future of the carbonbased hybrid ink for directly large-scale inkjet printing MSCs for disposable energy storage devices.

Composition Optimization and Microstructure Design in MOFs-Derived Magnetic Carbon-Based Microwave Absorbers:A Review

Magnetic carbon-based composites are the most attractive candidates for electromagnetic(EM)absorption because they can terminate the propagation of surplus EM waves in space by interacting with both electric and magnetic branches.Metal-organic frameworks(MOFs)have demonstrated their great potential as sacrificing precursors of magnetic metals/carbon composites,because they provide a good platform to achieve high dispersion of magnetic nanoparticles in carbon matrix.Nevertheless,the chemical composition and microstructure of these composites are always highly dependent on their precursors and cannot promise an optimal EM state favorable for EM absorption,which more or less discount the superiority of MOFs-derived strategy.It is hence of great importance to develop some accompanied methods that can regulate EM properties of MOFs-derived magnetic carbon-based composites e ectively.This review comprehensively introduces recent advancements on EM absorption enhancement in MOFs-derived magnetic carbon-based composites and some available strategies therein.In addition,some challenges and prospects are also proposed to indicate the pending issues on performance breakthrough and mechanism exploration in the related field.

Wet carbon-based solid acid/NaNO_3 as a mild and efficient reagent for nitration of aromatic compound under solvent free conditions

Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature.

Wet carbon-based solid acid/potassium permanganate as an efficient heterogeneous reagents for oxidation of alcohols under mild conditions

Wet carbon-based solid acid and potassium permanganate were used as new reagents for oxidation of alcohols to their corresponding aldehydes and ketones in heterogeneous mixtures. The experiments were done moderately at mild condition and high yields in suitable times were obtained.

Photo-rechargeable batteries and supercapacitors:Critical roles of carbon-based functional materials

As a clean and renewable energy source,solar energy is a competitive alternative to replace conventional fossil fuels.Nevertheless,its serious fluctuating nature usually leads to a poor alignment with the actual energy demand.To solve this problem,the direct solar-to-electrochemical energy conversion and storage have been regarded as a feasible strategy.In this context,the development of high-performance integrated devices based on solar energy conversion parts(i.e.,solar cells or photoelectrodes)and electrochemical energy storage units(i.e.,rechargeable batteries or supercapacitors[SCs])has become increasingly necessary and urgent,in which carbon and carbon-based functional materials play a fundamental role in determining their energy conversion/storage performances.Herein,we summarize the latest progress on these integrated devices for solar electricity energy conversion and storage,with special emphasis on the critical role of carbon-based functional materials.First,principles of integrated devices are introduced,especially roles of carbon-based materials in these hybrid energy devices.Then,two major types of important integrated devices,including photovoltaic and photoelectrochemicalrechargeable batteries or SCs,are discussed in detail.Finally,key challenges and opportunities in the future development are also discussed.By this review,we hope to pave an avenue toward the development of stable and efficient devices for solar energy conversion and storage.

基于STRAW+10分期的广州地区围绝经期代谢综合征患者中医体质调查

【目的】基于生殖衰老分期(STRAW)+10调查广州地区围绝经期代谢综合征患者的中医体质类型分布,为围绝经期代谢综合征患者提供中医体质调养理论依据。【方法】根据代谢综合征的诊断标准,纳入围绝经期代谢综合征患者共90例,根据STRAW+10分期标准分为绝经过渡早期(-2期)组49例、绝经过渡晚期(-1期)组24例、绝经后期早期(+la期)组17例。采用《中医体质分类与判定标准》对所有调查对象进行中医体质调查,同时采用焦虑自评量表(SAS)及抑郁自评量表(SDS)进行焦虑抑郁评分,分析不同STRAW+10分期患者的中医体质类型分布,比较不同STRAW+10分期患者的SAS、SDS评分情况。【结果】(1)绝经过渡早期(-2期)组的最主要中医体质类型中,出现频次最高的中医体质为阳虚质14例(29.79%),其次为平和质10例(21.28%),再次之为阴虚质和血瘀质各6例(12.76%);绝经过渡晚期(-1期)组的最主要中医体质类型中,出现频次最高的中医体质为阳虚质6例(25.00%),其次为平和质和血瘀质各4例(16.66%),再次之为气虚质和痰湿质各3例(12.50%);绝经后期早期(+la期)组的最主要中医体质类型中,出现频次最高的中医体质为阳虚质7例(46.67%),其次为平和质、痰湿质、血瘀质各2例(13.33%),再次之为气虚质、气郁质各1例(6.67%)。(2)绝经过渡早期(-2期)患者的SAS评分和SDS评分分别为(34.55±7.46)、(35.55±10.61)分,均高于绝经过渡晚期(-1期)患者的(33.83±7.73)、(35.46±11.35)分和绝经后期早期(+la期)患者的(35.65±8.67)、(36.59±12.07)分,且均高于总体平均水平。【结论】围绝经期代谢综合征患者的中医体质以阳虚质为主,平和质随着分期的进展逐渐减少,而偏颇体质从阴虚质、血瘀质逐渐转变为气虚质、痰湿质,再到痰湿质、血瘀质;随着分期进展,围绝经期代谢综合征患者本虚更虚而标实之邪也在加重。

Straw return increases crop production by improving soil organic carbon sequestration and soil aggregation in a long-term wheat-cotton cropping system

Straw return is a promising strategy for managing soil organic carbon(SOC)and improving yield stability.However,the optimal straw return strategy for sustainable crop production in the wheat(Triticum aestivum L.)-cotton(Gossypium hirsutum L.)cropping system remains uncertain.The objective of this study was to quantify the long-term(10 years)impact of carbon(C)input on SOC sequestration,soil aggregation and crop yields in a wheat-cotton cropping system in the Yangtze River Valley,China.Five treatments were arranged with a single-factor randomized design as follows:no straw return(Control),return of wheat straw only(Wt),return of cotton straw only(Ct),return of 50%wheat and 50%cotton straw(Wh-Ch)and return of 100%wheat and 100%cotton straw(Wt-Ct).In comparison to the Control,the SOC content increased by 8.4 to 20.2%under straw return.A significant linear positive correlation between SOC sequestration and C input(1.42-7.19 Mg ha^(−1)yr^(−1))(P<0.05)was detected.The percentages of aggregates of sizes>2 and 1-2 mm at the 0-20 cm soil depth were also significantly elevated under straw return,with the greatest increase of the aggregate stability in the Wt-Ct treatment(28.1%).The average wheat yields increased by 12.4-36.0%and cotton yields increased by 29.4-73.7%,and significantly linear positive correlations were also detected between C input and the yields of wheat and cotton.The average sustainable yield index(SYI)reached a maximum value of 0.69 when the C input was 7.08 Mg ha^(−1)yr^(−1),which was close to the maximum value(SYI of 0.69,C input of 7.19 Mg ha^(−1)yr^(-1))in the Wt-Ct treatment.Overall,the return of both wheat and cotton straw was the best strategy for improving SOC sequestration,soil aggregation,yields and their sustainability in the wheat-cotton rotation system.

Dynamic changes of rumen microbiota and serum metabolome revealed increases in meat quality and growth performances of sheep fed bio‑fermented rice straw

Background Providing high-quality roughage is crucial for improvement of ruminant production because it is an essential component of their feed.Our previous study showed that feeding bio-fermented rice straw(BF)improved the feed intake and weight gain of sheep.However,it remains unclear why feeding BF to sheep increased their feed intake and weight gain.Therefore,the purposes of this research were to investigate how the rumen micro-biota and serum metabolome are dynamically changing after feeding BF,as well as how their changes influence the feed intake,digestibility,nutrient transport,meat quality and growth performances of sheep.Twelve growing Hu sheep were allocated into 3 groups:alfalfa hay fed group(AH:positive control),rice straw fed group(RS:negative control)and BF fed group(BF:treatment).Samples of rumen content,blood,rumen epithelium,muscle,feed offered and refusals were collected for the subsequent analysis.Results Feeding BF changed the microbial community and rumen fermentation,particularly increasing(P<0.05)relative abundance of Prevotella and propionate production,and decreasing(P<0.05)enteric methane yield.The histomorphology(height,width,area and thickness)of rumen papillae and gene expression for carbohydrate trans-port(MCT1),tight junction(claudin-1,claudin-4),and cell proliferation(CDK4,Cyclin A2,Cyclin E1)were improved(P<0.05)in sheep fed BF.Additionally,serum metabolome was also dynamically changed,which led to up-regulating(P<0.05)the primary bile acid biosynthesis and biosynthesis of unsaturated fatty acid in sheep fed BF.As a result,the higher(P<0.05)feed intake,digestibility,growth rate,feed efficiency,meat quality and mono-unsaturated fatty acid concentration in muscle,and the lower(P<0.05)feed cost per kg of live weight were achieved by feeding BF.Conclusions Feeding BF improved the growth performances and meat quality of sheep and reduced their feed cost.Therefore,bio-fermentation of rice straw could be an innovative way for improving ruminant production with mini-mizing production costs.

Recent Advances in Carbon-Based Current Col lectors/Hosts for Alkali Metal Anodes

The urgent demand for high-energy-density storage systems evokes the research upsurge on the alkali metal batteries with high theoretical capacities.However,the utilization of alkali metal anodes,including Li,Na,and K,is significantly hindered by notorious dendrite growth,undesirable corrosion,and unstable solid electrolyte interface.In order to resolve these issues,the carbon materials for the rational design of current collector/host that can regulate the plating/stripping behavior of alkali metal have been exploited.These carbon-based current collectors/hosts are featured with many pivotal advantages,including mechanical integrity to accommodate the volume change,superior electronic/ionic conductivity,large available surface area,and rich functionalization chemistries to increase the affinity to alkali metal.In this review,the recent progress on various dimensional carbon-based current collectors/hosts with different chemical components in stabilizing the alkali metal anodes through the regulation of initial deposition and subsequent growth behavior during plating/stripping process is provided.The nanostructured carbon scaffolds with self-affinity to alkali metals,as well as the carbon frameworks with internal/external affinitive sites to alkali metals,catalogued by various dimensions,are discussed in this review.Therefore,these appealing strategies based on the carbon-based current collectors/hosts can provide a paradigm for the realization of high-energy-density alkali metal batteries.

Enhancing the cycling stability of Na-ion batteries by bonding MoS2 on assembled carbon-based materials

Room temperature Na-ion batteries(SIBs) show great potential for use as renewable energy storage systems.However, the large-scale application of SIBs has been hindered by the lack of an ideal SIBs anode material. We synthesized MoS2 on carbonized graphene-chitosan(G-C) using the hydrothermal method. The strong interaction between the MoS2 and the G-C greatly improved the electron transport rate and maintained the structural stability of the electrode, which lead to both an excellent rate capability and long cycle stability. The G-C monolith was proven to enhance the electrical conductivity of the composites and served as a matrix for uniformly dispersing active MoS2 nanosheets(NSs), as well as being a buffer material to adapt to changes in volume during the cycle.Serving as an anode material for SIBs, the MoS2-G-C electrode showed good cycling stability(527.3mAh g-1 at100 m A g-1 after 200 cycles), excellent rate capability, and a long cycle life(439.1 m Ah g-1 at 1 A g-1 after 200 cycles).

Long-Chain Gemini Surfactant-Assisted Blade Coating Enables Large-Area Carbon-Based Perovskite Solar Modules with Record Performance

Carbon-based perovskite solar cells show great potential owing to their low-cost production and superior stability in ambient air.However,scaling up to high-efficiency carbon-based solar modules hinges on reliable deposition of uniform defect-free perovskite films over large areas,which is an unsettled but urgent issue.In this work,a long-chain gemini surfactant is introduced into perovskite precursor ink to enforce self-assembly into a network structure,considerably enhancing the coverage and smoothness of the perovskite films.The long gemini surfactant plays a distinctively synergistic role in perovskite film construction,crystallization kinetics modulation and defect passivation,leading to a certified record power conversion efficiency of 15.46%with Voc of 1.13 V and Jsc of 22.92 mA cm^(-2)for this type of modules.Importantly,all of the functional layers of the module are printed through a simple and high-speed(300 cm min^(-1))blade coating strategy in ambient atmosphere.These results mark a significant step toward the commercialization of all-printable carbon-based perovskite solar modules.

Factors influencing the performance of paintable carbon-based perovskite solar cells fabricated in ambient air

To date, many efforts have been made to improve the performance of paintable carbon-based （PC-based） perovskite solar cells （PSCs）. Though great progress has been achieved, their power conversion efficiencies are still relatively low compared with hole-transport-materials-based PSCs. General research on influencing factors of performance in PC-based PSCs is still insufficient. In this work, PC-based PSCs were fabricated in ambient air and four groups of controlled experi- ments were performed in which the PbI2 layers were prepared with or without antisolvent extraction treatment. These four groups of experiments were designed to find out the effect of different influencing factors on PC-based PSCs performance, for example, PbI2 residual, the surface morphology of the perovskite film, the surface roughness of the perovskite film, and the contact status of the perovskite/carbon electrode interface. With a systematic analysis, we demonstrated that the contact status of the perovskite/carbon electrode interface played a vital role in PC-based PSCs, and a fiat, smooth perovskite surface could help to improve this contact status significantly. Besides, on the precondition of a poor contact interface, no PbI2 residual and a good surface morphology only brought limited benefits to the performances of PC-based PSCs.

Specializing liquid electrolytes and carbon-based materials in EDLCs for low-temperature applications

Electric double-layer capacitors(EDLCs) are emerging technologies to meet the ever-increasing demand for sustainable energy storage devices and systems in the 21 st Century owing to their advantages such as long lifetime, fast charging speed and environmentally-friendly nature, which play a critical part in satisfying the demand of electronic devices and systems. Although it is generally accepted that EDLCs are suitable for working at low temperatures down to-40℃, there is a lack of comprehensive review to summarize the quantified performance of EDLCs when they are subjected to low-temperature environments. The rapid and growing demand for high-performance EDLCs for auxiliary power systems in the aeronautic and aerospace industries has triggered the urge to extend their operating temperature range,especially at temperatures below-40℃. This article presents an overview of EDLC’s performance and their challenges at extremely low temperatures including the capability of storing a considerable amount of electrical energy and maintaining long-term stability. The selection of electrolytes and electrode materials is crucial to the performance of EDLCs operating at a desired low-temperature range. Strategies to improve EDLC’s performance at extremely low temperatures are discussed, followed by the future perspectives to motivate more future studies to be conducted in this area.

Preparation, Characterization and Catalytic Activity of Alkyl Benzene Sulfonic Acid Carbon-Based Acid Catalyst

Based on starch and series of alkyl benzene sulfonic acid as the materials, a novel carbon-based solid acid catalyst is synthesized using hydrothermal method. This catalyst exhibits much higher catalytic activity in the reaction of esterification of Mono-fatty alcohol polyoxyethylene maleate esters with 1,4-butanediol. The structure of carbon-based solid acid catalyst was charactered by IR and XRD, characterizations showed that this catalyst exhibited high –SO3H loading. Reusability of the carbon-based solid acid catalyst for esterification showed that after recycling five times the activity remained unchanged.