Nonlocal stress gradient formulation for damping vibration analysis of viscoelastic microbeam in thermal environment

An integral nonlocal stress gradient viscoelastic model is proposed on the basis of the integral nonlocal stress gradient model and the standard viscoelastic model,and is utilized to investigate the free damping vibration analysis of the viscoelastic BernoulliEuler microbeams in thermal environment.Hamilton's principle is used to derive the differential governing equations and corresponding boundary conditions.The integral relations between the strain and the nonlocal stress are converted into a differential form with constitutive constraints.The size-dependent axial thermal stress due to the variation of the environmental temperature is derived explicitly.The Laplace transformation is utilized to obtain the explicit expression for the bending deflection and moment.Considering the boundary conditions and constitutive constraints,one can get a nonlinear equation with complex coefficients,from which the complex characteristic frequency can be determined.A two-step numerical method is proposed to solve the elastic vibration frequency and the damping ratio.The effects of length scale parameters,viscous coefficient,thermal stress,vibration order on the vibration frequencies,and critical viscous coefficient are investigated numerically for the viscoelastic Bernoulli-Euler microbeams under different boundary conditions.

Behaviour of granular matter under gravity-induced stress gradient:A two-dimensional numerical investigation

Gravity is the most important load source in mining and geotechnical engineering,which causes both the stress level and stress gradient inside geomaterials.Different from the stress level,the influence of gravity-induced stress gradient on the behaviour of the material is still unknown.An in-deep study on it will help to promote the understanding of material behaviour,especially for those cases related to unconventional gravity such as terrestrial ng physical modelling and extraterrestrial resource exploitation(g is the terrestrial gravitational acceleration).In this study,a high-order homogenization for granular materials is proposed at first,in which the stress gradient is drawn into the constitutive representation by adopting a representative volume element(RVE).The consolidation and shear strength behaviour of RVE are then investigated by performing numerical biaxial tests.The results show that all the compressibility,shear strength,shear stiffness,volumetric deformation,and critical state behaviour show a stress gradient dependence.A coupling between stress gradient,stress level,and material properties is also observed.These observations suggest that,besides the stress level,extra attention needs to be paid to material responses related to stress gradient during engineering practices.

Simulation of X-ray Diffraction Line Broadening Caused by Stress Gradients and Determination of Stress Distribution by Fourier Analysis

Different physical, mechanical and chemical processes, such as： ion implantation, oxidation, nitridation and others create on the surface of materials residual stress state, characterized by high level and strong gradient. X-ray diffraction method widely used for stress measurements has some difficulties in interpretation of experimental data, when the depth of X-ray penetration is compared with thickness of surface layer where inhomogeneous stress distribution is localized. Early it has been shown by authors that diffraction line broadening occurs when analyzed surface is characterized by strong gradient. The interest to study the diffraction line broadening is connected to the possibility of obtaining information about parameters of surface stress distribution. In the present paper the convolution and deconvolution concepts of Fourier analysis were applied to study X ray diffraction line broadening caused by surface stress gradients. Developed methodology allows determining of stress distribution in superficial layers of materials.

ANALYSIS OF PULSATILE FLOW IN THE PARALLEL-PLATE FLOW CHAMBER WITH SPATIAL SHEAR STRESS GRADIENT

The Parallel-Plate Flow Chamber （PPFC）, of which the height is far smaller than its own length and width, is one of the main apparatus for the in-vitro study of the mechanical behavior of cultured vascular Endothelical Cells （ECs） exposed to fluid shear stress. The steady flow in different kinds of PPFC has been extensively investigated, whereas, the pulsatile flow in the PPFC has received little attention. In consideration of the characteristics of geometrical size and pulsatile flow in the PPFC, the 3-D pulsatile flow was decomposed into a 2-D pulsatile flow in the vertical plane, and an incompressible plane potential flow in the horizontal plane. A simple method was then proposed to analyze the pulsatile flow in the PPFC with spatial shear stress gradient. On the basis of the method, the pulsatile fluid shear stresses in several reported PPFCs with spatial shear stress gradients were calculated. The results were theoretically meaningful for applying the PPFCs in-vitro, to simulate the pulsatile fluid shear stress environment, to which cultured ECs were exposed.

Modeling of growth stress gradient effect on the oxidation rate at high temperature

A new oxidation kinetics model is established for high-temperature oxidation. We assume that the interface reaction is fast enough and the oxidation rate is controlled by diffusion process at high temperature. By introducing the growth stress gradient we modify the classical oxidation parabolic law. The modified factor of the oxidation rate constant is a function of growth strain, environment oxygen concentration, and temperature. The modeling results show that the stress gradient effect on the oxidation rate cannot be ignored. Growth strain will dominate whether the stress gradient effect promotes or slows down the oxidation process. The stress gradient effect becomes weaker at higher temperature. This effect is amplified at higher concentrations of environmental oxygen. Applied mechanical loads do not affect the oxidation rate. This model is available for high temperature oxidation of metals and alloys.

A UNIVERSAL CRACK EXTENSION CRITERION BASED ON THE EQUIVALENT STRESS GRADIENT:I.THEORY AND NUMERICAL VERIFICATION

In this contribution,the microscopic fracture mechanism and extension criterion for mixed type crack in ductile material under plane mixed mode loading are investigated in details.A universal extension criterion for the mixed type crack,i.e.the crack propagates along the direction of the maximum gradient of equivalent stress,is suggested.This new criterion is used to predict the propagation direction of mixed type crack,showing a good agreement with other theories for different types of mode mixity.Moreover,the numerical verification is also carried out for the case of an edge crack with different mixed mode loadings.Finally,a potential application to three-dimensional fracture in the ductile material induced by holes is also discussed.

A Novel Maximum Resolved Shear Stress Gradient Criterion and Its Application for Crack Deflection Behavior in Polycrystalline Silicon Materials

In this paper,a development of new resolved shear stress gradient criteria is performed for the study of crack propagation behavior in polycrystalline materials with an emphasis on the effect of slip plane and slip direction.The prediction of crack deflection behavior by the maximum resolved shear stress gradient criterion shows good agreement with the experimental results.Comparison study for the prediction of crack propagation behavior in poly crystalline materials by other criteria demonstrates that the maximum resolved shear stress gradient criterion is superior to other fracture criteria.This suggests that the new criterion could be further applied for predicting the crack deflection behavior in other polycrystalline materials.

Dynamic response and failure of rock in initial gradientstress field under stress wave loading

Once an opening is created in deep underground,the stresses surrounding the opening will be redistributed,inducing a gradient stress field.To understand how the ground rock in such a gradient stress field responses to dynamic stress loading,the gradient stress distribution at a circular opening was first analyzed and the propagation of 1D stress wave in rock mass under gradient stress field was theoretically derived.By using an implicit to explicit solution method in LS-DYNA code,the dynamic mechanical behaviors of rock in gradient stress field were numerically investigated.The results indicate that the damage is mainly produced at or near the free face,partly due to the straight action of compressive stress wave and the tensile stress wave generated at the free face.The range of the induced damage zone is narrowed under the conditions of higher gradient stress rate and lower dynamic stress amplitude.However,under lower gradient stress field and higher dynamic stress,the damage becomes severer and wider with discontinuous failure regions.

Effect of an adverse pressure gradient on the streamwise Reynolds stress profile maxima in a turbulent boundary layer

It is widely accepted that in a turbulent boundary layer （TBL） with adverse pressure gradient （APG） an outer peak usually appears in the profile of streamwise Reynolds stress. However, the effect of APG on this outer peak is not clearly understood. In this paper, the effect of APG is analysed using the numerical and experimental results in the literature. Because the effect of upstream flow is inherent in the TBL, we first analyse this effect in TBLs with zero pressure gradient on flat plates. Under the individual effect of upstream flow, an outer peak already appears in the profile of streamwise Reynolds stress when the TBL continues developing in the streamwise direction. The APG accelerates the appearance of the outer peak, instead of being a trigger.

Numerical investigation of a coupled moving boundary model of radial flow in low-permeable stress-sensitive reservoir with threshold pressure gradient

The threshold pressure gradient and formation stress-sensitive effect as the two prominent physical phenomena in the development of a low-permeable reservoir are both considered here for building a new coupled moving boundary model of radial flow in porous medium. Moreover, the wellbore storage and skin effect are both incorporated into the inner boundary conditions in the model. It is known that the new coupled moving boundary model has strong nonlinearity. A coordinate transformation based fully implicit finite difference method is adopted to obtain its numerical solutions. The involved coordinate transformation can equivalently transform the dynamic flow region for the moving boundary model into a fixed region as a unit circle, which is very convenient for the model computation by the finite difference method on fixed spatial grids. By comparing the numerical solution obtained from other different numerical method in the existing literature, its validity can be verified. Eventually, the effects of permeability modulus, threshold pressure gradient, wellbore storage coefficient, and skin factor on the transient wellbore pressure, the derivative, and the formation pressure distribution are analyzed respectively.

Structure design of gradient hard coatings on YG8 and their residual stress analysis by ANSYS

A structure of gradient hard coatings( Ti,TiN,TiCN and TiAlN) is designed,and residual stress is simulated by a finite element method with ANSYS. The influence of the realistic situation including load and temperature on the residual stress of the coatings is investigated. Simulated results show that the realistic situation strongly affects the residual stress. To be specific,i) The main residual stress concentrates on the coatings prepared on YG8 substrate,and the residual stress and its gradient of the coatings are bigger than that of the substrate; ii) TiAlN and TiCN coatings have better resistance compression than that of TiN coatings in the same condition; iii) The improved multilayer structure of the gradient hard coatings produces weaker residual stress but higher anti-pressure of the substrate.

AN ASYMPTOTIC METHOD FOR ANALYZING THE STRESS IN A FUNCTIONALLY GRADIENT MATERIAL LAYER ON A SURFACE OF A STRUCTURAL COMPONENT

A simple and effective method for analyzing the stress distribution in a Functionally Gradient Material(FGM) layer on the su;face of a structural component is proposed in this paper. Generally, the FGM layer is very thin compared with the characteristic length of the structural component, and the nonhomogeneity exists only in the thin layer. Based on these features, by choosing a small parameter I which characterizes the stiffness of the layer relative to the component, and expanding the stresses and displacements on the two sides of the interface according to the parameter lambda, then asymptotically using the continuity conditions of the stresses and displacements on the interface, a decoupling computing process of the coupling control equations of the layer and the structural component is realized. Finally, two examples are given to illustrate the application of the method proposed.

Effects of gradient interlayer on residual stress and cracking in TiN thin films

The influence of a gradient interlayer on the residual stress and cracking in TiN thin films was studied as a function of the thickness of gradient interlayer. Both X ray in situ tensile testing and grazing method were used to measure the residual stress in thin films. In TiN films, there exists a residual stress of 10 GPa, which can be remarkably decreased by a gradient interlayer between film and substrate. The cracking behavior of films after tension shows that the crack of film/substrate system begins at interface between film and substrate.

Converging Parallel Plate Flow Chambers for Studies on the Effect of the Spatial Gradient of Wall Shear Stress on Endothelial Cells

Many in vitro studies focus on effects of wall shear stress (WSS) and wall shear stress gradient (WSSG) on endothelial cells, which are linked to the initiation and progression of atherosclerosis in the arterial system. Limitation in available flow chambers with a constant WSSG in the testing region makes it difficult to quantify cellular responses to WSSG. The current study proposes and characterizes a type of converging parallel plate flow chamber (PPFC) featuring a constant gradient of WSS. A simple formula was derived for the curvature of side walls, which relates WSSG to flow rate (Q), height of the PPFC (h), length of the convergent section (L), its widths at the entrance (w0) and exit (w1). CFD simulation of flow in the chamber is carried out. Constant WSSG is observed in most regions of the top and bottom plates except those in close proximity of side walls. A change in Q or h induces equally proportional changes in WSS and WSSG whereas an alteration in the ratio between w0 and w1 results in a more significant change in WSSG than that in WSS. The current design makes possible an easy quantification of WSSG on endothelial cells in the flow chamber.

Stress Field Analyses of Functionally Gradient Ceramic Tool by FEM

The cutting properties of the functionally gradient ceramic cutting tools relate closely to the gradient distribution. A cutting model of the functionally gradient ceramic tool is firstly designed in the present paper. The optimum of gradient distribution is obtained by way of the FEM analyses.

Coherent gradient sensing method for measuring thermal stress field of thermal barrier coating structures

Coherent gradient sensing （CGS） method can be used to measure the slope of a reflective surface, and has the merits of full-field, non-contact, and real-time measurement. In this study, the thermal stress field of thermal barrier coating （TBC） structures is measured by CGS method. Two kinds of powders were sprayed onto Ni-based alloy using a plasma spraying method to obtain two groups of film-substrate specimens. The specimens were then heated with an oxy-acetylene flame. The resulting thermal mismatch between the film and substrate led to out-of-plane deformation of the specimen. The deformation was measured by the reflective CGS method and the thermal stress field of the structure was obtained through calibration with the help of finite element analysis. Both the experiment and numerical results showed that the thermal stress field of TBC structures can be successfully measured by CGS method.

Genetic Algorithm for the Thermal Stresses Optimum Design ofFunctionally Gradient Material Plate

Based on the thermal stress distribution for functionally gradient material (FGM) plates, a Genetic Algorithm (GA) method for the thermal stresses optimum design of FGM plate with computer technologies is given. The minimum thermal stresses combination distribution for FGM is obtained.

THERMAL STRESSES ANALYSIS OF CERAMIC/METAL FUNCTIONALLY GRADIENT MATERIAL CYLINDER

In this paper, the composite cylinder system is made of three layers: metal, functionally gradient material (FGM) and ceramics is studied. The formulas of the steady_state temperature distribution and the associate thermal stress distribution in the cylinder are obtained. For ZrO 2/Ti_6Al_4V system, the distribution of steady_state temperature and thermal stress are calculated and discussed.

Finite Element Analysis of Thermal Stresses in Ceramic/Metal Gradient Thermal Barrier Coatings

This paper studied the thermal stresses of ceramicl metal gradient thermal barrier coating which combines the conceptions of ceramic thermal barrier coating （TBC） and functionally gradient material （FGM）. Thermal stresses and residual thermal stresses were calculated by an ANSYS finite element analysis software. Negative thermal expansion coefficient method was proposed and element birth and death method was applied to analyze the residual thermal stresses which have non-uniform initial temperature field. The numerical results show a good agreement with the analytical results and the experimental results.

考虑应力梯度效应的金属微梁屈服模型研究

一系列微加载测试结果表明,金属微梁的弯曲强度会随着材料外部几何特征尺寸的减小而显著升高,呈现出明显的尺寸相关性.基于位错塞积模型,探讨了纯金属单晶微梁的初始屈服应力,并提出了描述其尺寸相关性行为的关键内禀特征长度.通过综合分析现有的微梁弯曲实验及其离散位错动力学数值模拟结果,并考虑到位错-自由表面交互作用的影响,提出了一种仅涉及位错源的位错塞积构型.在此构型下,对线性应力梯度作用下的位错塞积行为进行了连续性分析,并建立了一个由位错源主导的应力梯度屈服模型.该模型有效地解释了微梁初始屈服应力的尺寸相关性,并与实验结果一致.研究结果表明,针对外部几何特征尺寸在数微米及以下的纯金属单晶微梁,位错塞积行为是其尺寸相关性行为的主导机制,而且刻画这种行为需要两个内禀特征长度参数,即位错源长度和位错塞积长度.为解释非均匀加载条件下微尺度晶体材料屈服应力的尺寸相关性行为,特别是纯金属单晶微梁,提供了新的视角.