Study on the Structure of Peroxide Cross-Linked Polyethylene Pipes with Several Stabilizers

Cross-linked polyethylene (PEX) pipes used in hot water supply are required for high mechanical strength and high creep resistance at high temperature. Especially PEX-a pipes which are made by peroxide cross-linking have better performance, such as creep resistance and thermal shock resistance than the pipes made by the other cross-linking method. Because the PEX-a pipes indicate the higher cross-link degree as compared with the other PEX pipes. In this study, the PEX-a pipes which were mixed with several stabilizers were tested to evaluate the effects on cross-link degree and the oxygen induction time. And also they are evaluated with the chlorine aqueous solution by the performance of the long-term hydrostatic pressure test and the long-term hydro dynamic pressure test. As a result, it was found that the combination of antioxidants for PEX-a pipes plays an important role to prolong the oxygen induction time without inhibiting the cross-linking. From the results of the 1H pulsed NMR measurement over the melting point of polyethylene, it was found that each peroxide PEX pipe with different antioxidant combinations indicated the different proportion and crosslink density of cross-linked region, in addition, that these pipes had the effective structure of cross-linking for the hydrostatic and hydrodynamic pressure test with the chlorine aqueous solution. Therefore, it was considered to be useful results for studies of the stricture of cross-linking of polyethylene.

Construction of all-organic low dielectric polyimide hybrids via synergistic effect between covalent organic framework and cross-linking structure

Polyimide(PI)is a promising electronic packaging material,but it remains challenging to obtain an all-organic PI hybrid film with decreased dielectric constant and loss without modifying the monomer.Herein,a series of allorganic PI hybrid films were successfully prepared by introducing the covalent organic framework(COF),which could induce the formation of the cross-linking structure in the PI matrix.Due to the synergistic effects of the COF fillers and the cross-linking structure,the PI/COF hybrid film containing 2 wt%COF exhibited the lowest dielectric constant of 2.72 and the lowest dielectric loss(tanδ)of 0.0077 at 1 MHz.It is attributed to the intrinsic low dielectric constant of COF and a large number of mesopores within the PI.Besides,the cross-linking network of PI prevents the molecular chains from stacking and improves the fraction of free volume(FFV).The molecular dynamics simulation results are well consistent with the dielectric properties data.Furthermore,the PI/COF hybrid film with 5 wt%COF showed a significant enhancement in breakdown strength,which increased to 412.8 kV/mm as compared with pure PI.In addition,the PI/COF hybrid film achieve to reduce the dielectric constant and thermal expansion coefficient(CTE).It also exhibited excellent thermal,hydrophobicity,and mechanical performance.The all-organic PI/COF hybrid films have great commercial potential as next-generation electronic packaging materials.

New Factor to Characterize Mechanism of “Strong Column-Weak Beam” of RC Frame Structures

Most reinforced concrete(RC)frame structures did not achieve the "strong column-weak beam" failure mode in recent big earthquakes, resulting in a large number of casualties and significant property loss. To deal with this serious problem, a new column-beam relative factor was proposed to characterize the relative yield situation of column ends and beam ends. By limiting the column-beam relative factor, RC frame structures could achieve the "strong column-weak beam" failure mode under the excitation of strong ground motions. The limit values of column-beam relative factor were calculated, analyzed and verified by using structural simulation models for corner columns in the bottom story of structures, which are destroyed most seriously in earthquakes. The results show that the limit values should be analyzed under bi-directional ground motion and with different axial compression ratios of columns. The peak ground acceleration(PGA)of ground motions has no significant effect on the limit values, while the type of strong ground motions has a significant effect on the limit values.

Structure of Rotating Neutron Stars in Uniform Strong Magnetic Field

Properties and deformations of the rotating neutron stars in uniform strong magnetic field are calculated. The magnetic field will soften the equation of state of the neutron star matters and make an obvious effect on the structure of the rotating neutron star. If the magnetic field is superstrong （B=10^17 T）, the mass, radius, and the deformation will become smaller effectively.

A Generic Description Model for the Structure of Atomic Nucleus with New Interpretation of the Strong Forces

The present investigation is motivated by finding and developing an easily understandable solution in the context of unified quantum and gravitational theories. Model-based methods are applied, with emphasis on structural descriptions by introducing some strong hypotheses. A subset of the introduced hypotheses led to a surprising understanding of the internal structure and construction of quarks, neutrons, protons and more complex atomic nuclei. The research work therefore focused mainly on the model-based interpretation of subatomic processes. The results obtained so far and presented in this paper are new. They consist of a generic description model for the structure of atomic nuclei. This model contains two important structural links that originate from the initial phase of the cosmological big bang. They hold atomic parts together and are involved in many known nuclear fusion and fission processes. Modifications of them, including the electron-positron annihilation process, are necessary and will be described. A new interpretation of the strong forces from the Standard Model is possible and will be given. In addition, the formation processes for electron and positron particles are considered. Based on the structural relationships, a deeper understanding of matter transformations (transmutations), early cosmological processes and dark matter has been achieved. All challenges of this work are the logical conclusions from the used hypotheses on two structural links. They need to be further investigated and verified by theoretical and experimental works. The postulated particle in this paper, as accompanying product in the electron-positron annihilation, will play a major role for the future investigations.

A Study of Structure and Mechanism of a Meso-beta-scale Convective Vortex and Associated Heavy Rainfall in the Dabie Mountain Area Part I: Diagnostic Analysis of the Structure

An analysis was conducted on the evolutional process of a mesoscale convective vortex （MCV） and associated heavy rainfall in the Dabie Mountain area on 21-22 June 2008,as well as their structural characteristics in different stages,by using the mesoscale reanalysis data with 3 km and 1 h resolution generated by the Local Analysis and Prediction System （LAPS） in the Southern China Heavy Rainfall Experiment.The results showed that the latent heat released by convection in the midtroposphere was the main energy source for the development of a low-level vortex.There was a positive feedback interaction between the convection and the vortex,and the evolution of the MCV was closely related to the strength of the positive interaction.The most typical characteristics of the thermal structure in different stages were that,there was a relatively thin diabatic heating layer in the midtroposphere in the formative stage;the thickness of diabatic heating layer significantly increased in the mature stage;and it almost disappeared in the decay stage.The characteristics of the dynamic structure were that,in the formative stage,there was no anticyclonic circulation at the high level;in the mature stage,an anticyclonic circulation with strong divergence was formed at the high level;in the decay stage,the anticyclonic circulation was damaged and the high-level atmosphere was in a disordered state of turbulence.Finally,the structural schematics of the MCV in the formative and mature stage were established respectively.

Cross-Linked Hollow Graphitic Carbon as Low-Cost and High-Performance Anode for Potassium Ion Batteries

Large-scale and low-cost preparation of carbon-based potassium anode with long life and high capacity is one of the footstones for the development of potassium ion batteries(PIBs).Herein,a low-cost carbon-based material,cross-linked hollow graphitic carbon(HGC),is large scale synthesized to apply for PIBs anode.Its hollow structure can afford sufficient space to overcome the damage caused by the volume expansion of graphitic carbon(GC).While the cross-linked structure forms a compact interconnection network that allows electrons to rapid transfer between different GC frameworks.Electrochemical measurements demonstrated that the HGC anode exhibited low charge/discharge plateau(about 0.25 V and 0.1 V)and excellent specific capacity as high as 298 m A h g^(-1)at the current density of 50 m A g^(-1).And more important,after 200 cycles the capacity of HGC anode still shows 269 m A h g^(-1)(the decay rate of per cycle is only 0.048%).Meanwhile,the use of commercial traditional electrolyte(KPF_(6))and cheap raw materials that provide new hope for trying and realizing the large-scale production of PIBs based on carbon anode materials.

Preparation and characterization of genipin-cross-linked chitosan microparticles by water-in-oil emulsion solvent diffusion method

Chitosan (CS) microparticles with and without cross-linking were prepared by a water-in-oil emulsion solvent diffusion method without any surfactants. Aqueous CS solution and ethyl ace- tate were used as water and oil phases, respectively. Genipin was used as a cross-linker. Influ- ences of genipin ratios and cross-linking times on CS microparticle characteristics were investigated. Non-cross-linked and cross-linked CS microparticles were spherical in shape and rough in surface. Microparticle matrices showed porous structures. Surface roughness, mean par- ticle sizes and bulk density of CS microparticles increased and their dissolutions in acetic acid solution decreased when genipin ratio and cross- linking time increased.

Strong metal–support interaction boosts the electrocatalytic hydrogen evolution capability of Ru nanoparticles supported on titanium nitride

Ruthenium(Ru)has been regarded as one of the most promising alternatives to substitute Pt for catalyzing alkaline hydrogen evolution reaction(HER),owing to its inherent high activity and being the cheapest platinum-group metal.Herein,based on the idea of strong metal–support interaction(SMSI)regulation,Ru/TiN catalysts with different degrees of TiN overlayer over Ru nanoparticles were fabricated,which were applied to the alkaline electrolytic water.Characterizations reveal that the TiN overlayer would gradually encapsulate the Ru nanoparticles and induce more electron transfer from Ru nanoparticles to TiN support by the Ru–N–Ti bond as the SMSI degree increased.Further study shows that the exposed Ru–TiN interfaces greatly promote the H_(2) desorption capacity.Thus,the Ru/TiN-300 with a moderate SMSI degree exhibits excellent HER performance,with an overpotential of 38 mV at 10 mA cm^(−2).Also,due to the encapsulation role of TiN overlayer on Ru nanoparticles,it displays super long-term stability with a very slight potential change after 24 h.This study provides a deep insight into the influence of the SMSI effect between Ru and TiN on HER and offers a novel approach for preparing efficient and stable HER electrocatalysts through SMSI engineering.

Basement interface structural characteristics beneath Jiashi strong earthquake swarm area in Xinjiang, China

The seismic data obtained from high resolution seismic refraction profile in Jiashi strong earthquake swarm area in Xinjiang, China were further processed with ray hit analysis method and more complete basement interface structural characteristics beneath Jiashi strong earthquake swarm area were determined. The results show that there are two clear basement interfaces at the upper crust in Jiashi strong earthquake swarm area. The first one with buried depth ranging from 2.6 km to 3.3 km presents integral and continuous structure, and it appears an inclined plane interface and smoothly rises up toward Tianshan Mountain. The second basement interface with buried depth from 8.5 km to 11.8 km, is the antiquated crystalline basement of Tarim basin. Near the post number of 37 km, the buried depth of the crystalline basement changed abruptly by 2.5 km, which maybe result from an ultra crystalline basement fault. If taking this fault as a boundary, the crystalline basement could be divided into two parts, i.e. the southwestern segment with buried depth about 11.5 km, and the northeastern segment with buried depth approxi-mately from 8.5 km to 9.0 km. That is to say, in each segment, the buried depth changes not too much. The northeast segment rises up as a whole and upheaves slightly from southwest to northeast, which reflects the upper crustal deformation characteristics under the special tectonic background at the northwestern edge of Tarim basin.

Kosterlitz–Thouless transition, spectral property and magnetic moment for a two-dot structure with level difference

By means of the numerical renormalization group method, we study the phase transition, the spectral property, and the temperature-dependent magnetic moment for a parallel double dot system with level difference, where the dot energies are kept symmetric to the half-filled level. A Kosterlitz–Thouless（KT） transition between local spin triplet and singlet is found. In the triplet regime, the local spin is partially screened by the conduction leads and spin-1 Kondo effect is realized.While for the singlet, the Kondo peak is strongly suppressed and the magnetic moment decreases to 0 at a definite low temperature. We attribute this KT transition to the breaking of the reflection symmetry, resulting from the difference of the charge occupations of the two dots. To understand this KT transition and related critical phenomena, detailed scenarios are given in the transmission coefficient and the magnetic moment, and an effective Kondo model refers to the RayleighSchrdinger perturbation theory is used.

Molecular Structure of Atomic Nucleus

In this work, we extend our work on the Heisenberg model of the neutron formulated as a dwarf hydrogen-like atom under the influence of the More General Exponential Screened Coulomb Potential (MGESCP) to show that an atomic nucleus may possess a molecular structure made up of atoms bonding together by a potential used to describe the strong force associated with a generalised Yukawa MGESCP potential. We show that the neutrons and protons are arranged into narrow lattices therefore they may fold to form three-dimensional shells by bonding similar to hydrogen bonding. In particular, the nucleons may form stable structures such as that of fullerenes in which the vertices are occupied by the nucleons which are simply just protons. For example, a nucleus with a total number of 60 nucleons may arrange itself into the topological structure of a buckminsterfullerene. We also apply Schrödinger wave equation with central field approximation to describe the quantum dynamics of nuclei of atomic atoms that now possess the physical structure of a dwarf molecular ion.

Highly integrated sulfur cathodes with strong sulfur/high-strength binder interactions enabling durable high-loading lithium-sulfur batteries

The development of high-sulfur-loading Li-S batteries is a key prerequisite for their commercial applications.This requires to surmount the huge polarization,severe polysulfide shuttling and drastic volume change caused by electrode thickening.High-strength polar binders are ideal for constructing robust and long-life high-loading sulfur cathodes but show very weak interfacial interaction with non-polar sulfur materials.To address this issue,this work devises a highly integrated sulfur@polydopamine/highstrength binder composite cathodes,targeting long-lasting and high-sulfur-loading Li-S batteries.The super-adhesion polydopamine(PD)can form a uniform nano-coating over the graphene/sulfur(G-S)surface and provide strong affinity to the cross-linked polyacrylamide(c-PAM)binder,thus tightly integrating sulfur with the binder network and greatly boosting the overall mechanical strength/conductivity of the electrode.Moreover,the PD coating and c-PAM binder rich in polar groups can form two effective blockades against the effusion of soluble polysulfides.As such,the 4.5 mg cm−2 sulfur-loaded G-S@PD-c-PAM cathode achieves a capacity of 480 mAh g−1 after 300 cycles at 1 C,while maintaining a capacity of 396 mAh g−1 after 50 cycles at 0.2 C when the sulfur loading rises to 9.1 mg cm−2.This work provides a system-wide concept for constructing high-loading sulfur cathodes through integrated structural design.

A Tangential Wind Profile for Simulating Strong Tropical Cyclones with MM5

A new tangential wind profile for simulating strong tropical cyclones is put forward and planted into the NCAR- AFWA tropical cyclone bogussing scheme in MM5. The scheme for the new profile can make full use of the information from routine typhoon reports, including not only the maximum wind, but also the additional information of the wind speeds of 25.7 and 15.4 ms-1 and their corresponding radii, which are usually provided for strong cyclones. Thus, the new profile can be used to describe the outer structure of cyclones more accurately than by using the earlier scheme of MM5 in which on- ly the maximum wind speed is considered. Numerical experimental forecasts of two strong tropical cyclones are performed to examine the new profile. Results show that by using the new profile the prediction of both cyclones’ intensity can be obvi- ously improved, but the effects on the track prediction of the two cyclones are different. It seems that the new profile might be more suitable for strong cyclones with shifted tracks. However, the conclusion is drawn from only two typhoon cases, so more cases are needed to evaluate the new profile.

Preparation and characterization of cross-linked β-cyclodextrin polymer/Fe_3O_4 composite nanoparticles with core-shell structures

Cross-linkedβ-cyclodextrin polymer/Fe3O4 composite nanoparticles with core-shell structures were prepared via cross linking reaction on the surface of carboxymethylβ-cyclodextrin（CM-β-CD） modified Fe3O4 nanoparticles inβ-cyclodextrin alkaline solution by using epichlorohydrin as crosslinking agent.The morphology,structure and magnetic properties of the prepared composite nanoparticles were investigated by transmission electron microscopy（TEM）,Fourier transform infrared（FTIR） spectrometry,X-ray diffraction（XRD） measurement,thermogravimetric analysis（TGA） and Vibrating sample magnetometry （VSM）,respectively.

Mechanism and control technology of strong ground pressure behaviour induced by high-position hard roofs in extra-thick coal seam mining

This work aimed at revealing the mechanism of strong ground pressure behaviour(SGPB)induced by high-position hard roof(HHR).Based on the supporting structures model of HHR,a modified voussoir beam mechanical model for HHR was established by considering the gangue support coefficient,through which the modified expressions of limit breaking span and breaking energy of HHR were deduced.Combined with the relationship between the dynamic-static loading stress of supporting body(hydraulic support and coal wall)and its comprehensive supporting strength,the criteria of ground pressure behaviour(GPB)induced by HHR were discussed.The types of Ⅰ_(1),Ⅰ_(2),Ⅱ_(1),andⅡ_(2) of GPB were interpreted.Results showed that types Ⅰ_(1) and Ⅰ_(2) were the main forms of SGPB in extra-thick coal seam mining.The main manifestation of SGPB was static stress,which was mainly derived from the instability of HHR rather than fracture.Accordingly,an innovative control technology was proposed,which can weaken static load by vertical-well separated fracturing HHR.The research results have been successfully applied to the 8101 working face in Tashan coal mine,Shanxi Province,China.The results of a digital borehole camera observation and stress monitoring proved the rationality of the GPB criteria.The control technology was successful,paving the way for new possibilities to HHR control for safety mining.

Strong coupled spinel oxide with N-rGO for high-efficiency ORR/OER bifunctional electrocatalyst of Zn-air batteries

The high cost,scarcity,and poor stability of precious-metal-based catalysts have hindered their extensive application in energy conversion and storage.This stimulates the search for earth-abundant alternatives to replace noble metal electrocatalysts.Hence,in this study,we investigate a novel and low-cost bifunctional electrocatalyst consisting of ZnCoMnO_(4) anchored on nitrogen-doped graphene oxide(ZnCoMnO_(4)/N-rGO).Benefiting from the strong Co-N interaction in ZnCoMnO_(4) and the coupled conductive N-rGO,the catalysts exhibit high electrocatalytic activity.Moreover,density functional theory calculations support the dominant role of the strong Co-N electronic interaction,which leads to ZnCoMnO_(4)/N-rGO having more favorable binding energies with O2 and H_(2) O,resulting in fast reaction kinetics.The obtained ZnCoMnO_(4)/N-rGO electrocatalyst exhibits superb bifunctional activity,with a half-wave potential of 0.83 V for the oxygen reduction reaction and a low onset potential of 1.57 V for the oxygen evolution reaction in 0.1 M KOH solution.Furthermore,a Zn-air battery driven by the ZnCoMnO_(4)/N-rGO catalyst shows remarkable discharge/charge performance,with a power density of 138.52 mW cm^(-2) and longterm cycling stability for 48 h.This work provides a promising multifunctional electrocatalyst based on non-noble metals for the storage and conversion of renewable energy.

Study of Sorption Properties of Anion Exchangers with Long-Chained Cross-Linking Agents for Tungsten Hydrometallurgy

The macroporous anion exchangers with long-chained cross-linking agents were investigated for the tungsten recovery from salt solutions.The physical-chemical characteristics of these sorbents were studied by means of sorption-desorption experiment aswell as electron and IR-spectroscopy.The anion exchangers on the basis of macroporous copolymers of methylacrylate and divinyl-ester of diethyleneglycol or tetravinyl-ester of pentaerythritol possess the exchange capacity to tungsten 2--5 times greater than the porous anion exchangers on the basis of styrene and divinylbenzene,therefore they can be used for selective tungsten recovery from comulex salt solutions.

Systematic Errors Induced by the Elliptical Power-law model in Galaxy–Galaxy Strong Lens Modeling

The elliptical power-law model of the mass in a galaxy is widely used in strong gravitational lensing analyses.However,the distribution of mass in real galaxies is more complex.We quantify the biases due to this model mismatch by simulating and then analyzing mock Hubble Space Telescope imaging of lenses with mass distributions inferred from SDSS-Ma NGA stellar dynamics data.We find accurate recovery of source galaxy morphology,except for a slight tendency to infer sources to be more compact than their true size.The Einstein radius of the lens is also robustly recovered with 0.1%accuracy,as is the global density slope,with 2.5%relative systematic error,compared to the 3.4%intrinsic dispersion.However,asymmetry in real lenses also leads to a spurious fitted"external shear"with typical strengthγext=0.015.Furthermore,time delays inferred from lens modeling without measurements of stellar dynamics are typically underestimated by~5%.Using such measurements from a sub-sample of 37 lenses would bias measurements of the Hubble constant H0 by~9%.Although this work is based on a particular set of Ma NGA galaxies,and the specific value of the detected biases may change for another set of strong lenses,our results strongly suggest the next generation cosmography needs to use more complex lens mass models.

On the physical model of earthquake precursor fields and the mechanism of precursors＇timespace distribution──origin and evidences of the strong body earthquake──generating model

According to the requirement of the project 'Establishment of the Physical Model of Earthquake PrecursorFields',this paper elucidates the train of thinking for research on the project and some scientific problems whichmust be studied i, the elucidation emphasizes that the core of this project is to study the conditions and processesof the generation of strong earthquakes. The paper first outlines the origin and development of the'strong-bodyearthquake-generating model' proposed by the author in the 1980;and then proves the reasonableness of themodel from three aspects, namely: deep structures, mechanical analysis and rock fracture experiments. Bystudying the tomographic image for the northern part of North China, it can be seen that the sources of strongearthquakes are all distributed in high-velocity bodies,or in the contact zone between high-velocity and lowvelocity bodies but nearer to the high-velocity body. It has been affirmed through studies of the mechanical modelsof hard and soft inclusions that the existence of a hard inclusion is an imPOrtant condition for the high concentration of large amounts of strain energy. A lot of theoretical and experimental studies have been made to investigate the conditions for rock instability; the results have consistently indicated that rock instability,sudden fracture and stress drop would be possible only if the stiffness of the source body is greater than the environmentalstiffness.