Weathering Characterization and Degradation Analysis of Landscape Wooden Buildings in Semi-Arid and Sandy Area

Wooden buildings play a very important role in China’s construction and landscape architecture industry.In order to explore the weathering characteristics of the surface layer of landscape wooden buildings,the main causes of weathering were analyzed on the basis of summarizing the common types of weathering characterization.The results showed that the weathering characterization was mainly reflected in the surface defects of wood structures,such as cracking,discoloration,peeling,wind erosion wear,and so on.The coating technology on the surface of constructions was the main artificial factor affecting the surface defects of constructions.In the case of similar surface decoration conditions,sunlight and moisture were the main natural factors affecting the weathering of wooden buildings,which will promote the process of weathering.

INVESTIGATION OF LOW CYCLE FATIGUE BEHAVIOROF BUILDING STRUCTURAL STEELS UNDEREARTHQUAKE LOADING

Based on the failure model of building structural steels under earthquake loading, the low cycle fatigue test at constant strain, the stochastical fatigue test under real earthquake load spectrum and the structural fatigue test are carried out. The experimental results show that microalloying of V Ti and Nb can improve the anti-seismic propersties of steel bars. In the high strain and shori life range, both the static strength and ductility of steels are very important to increasing the low cycle fatigue resistance of steels.

ODE-Solver-Oriented Computational Method for the Structural Dynamic Analysis of Super Tall Buildings

The paper is to introduce a computational methodology that is based on ordinary differential equations （ODE） solver for the structural systems adopted by a super tall building in its preliminary design stage so as to facilitate the designers to adjust the dynamic properties of the adopted structural system. The construction of the study is composed by following aspects. The first aspect is the modelling of a structural system. As a typical example, a mega frame-core-tube structural system adopted by some famous super tall buildings such as Taipei 101 building, Shanghai World financial center, is employed to demonstrate the modelling of a computational model. The second aspect is the establishment of motion equations constituted by a group of ordinary differential equations for the analyses of free vibration and resonant response. The solutions of the motion equations （that constitutes the third aspect） resorted to ODE-solver technique. Finally, some valuable conclusions are summarized.

Low Carbon Building Design Optimization Based on Intelligent Energy Management System

The construction of relevant standards for building carbon emission assessment in China has just started,and the quantitative analysis method and evaluation system are still imperfect,which hinders the development of low-carbon building design.Therefore,the use of intelligent energy management system is very necessary.The purpose of this paper is to explore the design optimization of low-carbon buildings based on intelligent energy management systems.Based on the proposed quantitative method of building carbon emission,this paper establishes the quota theoretical system of building carbon emission analysis,and develops the quota based carbon emission calculation software.Smart energy management system is a low-carbon energy-saving system based on the reference of large-scale building energy-saving system and combined with energy consumption.It provides a fast and effective calculation tool for the quantitative evaluation of carbon emission of construction projects,so as to realize the carbon emission control and optimization in the early stage of architectural design and construction.On this basis,the evaluation,analysis and calculation method of building structure based on carbon reduction target is proposed,combined with the carbon emission quota management standard proposed in this paper.Taking small high-rise residential buildings as an example,this paper compares and analyzes different building structural systems from the perspectives of structural performance,economy and carbon emission level.It provides a reference for the design and evaluation of low-carbon building structures.The smart energy management system collects user energy use parameters.It uses time period and time sequence to obtain a large amount of data for analysis and integration,which provides users with intuitive energy consumption data.Compared with the traditional architectural design method,the industrialized construction method can save 589.22 megajoules(MJ)per square meter.Based on 29270 megajoules(MJ)per ton of standard coal,the construction area of the case is about 8000 m2,and the energy saving of residential buildings is 161.04 tons of standard coal.This research is of great significance in reducing the carbon emission intensity of buildings.

Construction of Teaching Case Base of Anti-Seismic Design of Building Structure

Anti-Seismic Design of Building Structures is an important course in civil engineering majors,and it is also a course that pays equal attention to theory and practice.Therefore,by establishing a case base for Anti-Seismic Design of Building Structures,the obscure theoretical knowledge can be taught to students in the form of examples,and the knowledge becomes intuitive.In this way,the students’understanding of anti-seismic design theory and the efficiency of teaching can be improved,and the students’interest in learning can be stimulated.

“3 Degrees and 8 Combinations” Teaching Mode of Anti-Seismic Design of Building Structures

Earthquakes pose a significant threat to people’s property and personal safety.Improving the teaching of civil engineering and building structure anti-seismic design courses can enable students to do a good job in anti-seismic design in the future and effectively reduce the damage on buildings caused by earthquakes.In this paper,we analyzed the basic characteristics of a course in civil engineering major,which is Anti-Seismic Design of Building Structures,and the shortcomings of traditional teaching.It is proposed that the 3-degrees and 8-combinations teaching mode of anti-seismic design of building structures can effectively improve students’autonomy and enthusiasm in learning,helps to cultivate professional ethics among students,and improve their ability to apply what they have learned.

A Review of Current Researches on Blast Load Effects on Building Structures in China

The damages of building structures subjected to multifarious explosions cause huge losses of lives and property. It is the reason why the blast resistance and explosion protection of building structures become an important research topic in the civil engineering field all over the world. This paper provides an overview of the research work in China on blast loads effect on building structures. It includes modeling blast shock wave propagation and their effects, the dynamic responses of various building structures under blast loads and the measures to strengthen the building structures against blast loads. The paper also discusses the achievements and further work that needs be done for a better understanding of the blast loads' effects on building structures, and for deriving effective and economic techniques to design new or to strengthen existing structures.

Vibration Control of a High-Rise Building Structure:Theory and Experiment

In this study,an innovative solution is developed for vibration suppression of the high-rise building.The infinite dimensional system model has been presented for describing high-rise building structures which have a large inertial load with the help of the Hamilton’s principle.On the basis of this system model and with the use of the Lyapunov’s direct method,a boundary controller is proposed and the closed-loop system is uniformly bounded in the time domain.Finally,by using the Smart Structure laboratory platform which is produced by Quancer,we conduct a set of experiments and find that the designed method is resultful.

Methods for Progressive Collapse Analysis of Building Structures Under Blast and Impact Loads

Progressive collapse of building structures under blast and impact loads has attracted great attention all over the world. Progressive collapse analysis is essential for an economic and safe design of building structures against progressive collapse to blast and impact loads. Because of the catastrophic nature of progressive collapse and the potentially high cost of constructing or retrofitting buildings to resist it, it is imperative that the progressive collapse analysis methods be reliable. For engineers, their methodology to carry out progressive collapse evaluation need not only be accurate and concise, but also be easily used and works fast. Thus, many researchers have been spending lots of effort in developing reliable, efficient and straightforward progressive collapse analysis methods recently. In the present paper, current progressive collapse analysis methods available in the literature are reviewed. Their suitability, applicability and reliability are discussed. Our recent proposed new method for progressive collapse analysis of reinforced concrete frames under blast loads is also introduced.

FUZZY MATHEMATICAL EVALUATION FOR MASONRY STRUCTURE BUILDINGS' DAMAGE GRADE CAUSED BY COAL MINING

Coal mining under buildings certainly causes surface movement and deformation, therefore, it brings about deformation even fracture for buildings. It is an important task to evaluate correcly the buildings’ damage grabe caused by coal mining. Fuzzy comprehensive evaluation,considering some factors of buildings’ fracture, has been applied to analyze the masonry structure buildings’ damage grade affer coal mining in this paper. It provides a scientific basis for buildings’reidercement before mining and maintenance or compensation after mining.

A novel 300 kW arc plasma inverter system based on hierarchical controlled building block structure

To date, the high power arc plasma technology is widely used. A next generation high power arc plasma system based on building block structure is presented. The whole arc plasma inverter system is composed of 12 paralleled units to increase the system output capability. The hierarchical control system is adopted to improve the reliability and flexibility of the high power arc plasma inverter. To ensure the reliable turn on and off of the IGBT module in each building block unit, a special pulse drive circuit is designed by using pulse transformer. The experimental result indicates that the high power arc plasma inverter system can transfer 300 kW arc plasma energy reliably with high efficiency.

Experimental study of friction dissipators for seismic protection of building structures

This paper presents the results from unidirectional shaking table tests of two reduced scale steel models of a building frame, with one and two floors, respectively. These frames incorporate friction dissipators at every floor. The inputs are sine-dwells and artificial and registered earthquakes. This study is part of a larger research project aiming to assess the seismic efficiency of friction dissipators by means of an integrated numerical and experimental approach. Inside this framework, the main objectives of these experiments are to： （i） collect a wide range of results to calibrate a numerical model derived within the project, （ii） clarify some of the most controversial issues about friction dissipators （including behavior for inputs containing pulses, capacity to reduce resonance peaks, introduction of high frequencies in the response, and self- generated eccentricities）, （iii） better understand their dynamic behavior, （iv） provide insight on the feasibility and reliability of using simple friction dissipators for seismic protection of building structures and （v） characterize the hysteretic behavior of these devices. Most of these objectives are satisfactorily reached and relevant conclusions are stated.

Design method of multiple time-delay controller for active structural vibration control

An optimal control method for seismic-excited building structures with multiple time delays is investigated in this paper. The system state equation with multiple time delays is discretized and transformed into a standard discrete form without any explicit time delay by a particular augmenting for state variables. A time-delay controller is then designed based on this standard equation using the discrete optimal control method. Effectiveness of the proposed controller is demonstrated by numerical simulations. Simulation results indicate that a very small time delay may result in the instability of the control system if it is not compensated in the control design. Time delay may be compensated effectively by the proposed controller, in the mean time, an effective control may be obtained. The proposed controller is valid for both small and large time delays.

Research of CBR, DM and smart algorithms based design methods for high-rise building structure form-selection

First, the high-rise building structure design process is divided into three relevant steps, that is, scheme generation and creation, performance evaluation, and scheme optimization. Then with the application of relational database, the case database of high-rise structures is constructed, the structure form-selection designing methods such as the smart algorithm based on CBR, DM, FINS, NN and GA is presented, and the original forms system of this method and its general structure are given. CBR and DM are used to generate scheme candidates; FINS and NN to evaluate and optimize the scheme performance; GA to create new structure forms. Finally, the application cases are presented, whose results fit in with the real project. It proves by combining and using the expert intelligence, algorithm intelligence and machine intelligence that this method makes good use of not only the engineering project knowledge and expertise but also much deeper knowledge contained in various engineering cases. In other words, it is because the form selection has a strong background support of vast real cases that its results prove more reliable and more acceptable. So the introduction of this method provides an effective approach to improving the quality, efficiency, automatic and smart level of high-rise structures form selection design.

A classification method of building structures based on multi-feature fusion of UAV remote sensing images

In order to improve the accuracy of building structure identification using remote sensing images,a building structure classification method based on multi-feature fusion of UAV remote sensing image is proposed in this paper.Three identification approaches of remote sensing images are integrated in this method:object-oriented,texture feature,and digital elevation based on DSM and DEM.So RGB threshold classification method is used to classify the identification results.The accuracy of building structure classification based on each feature and the multi-feature fusion are compared and analyzed.The results show that the building structure classification method is feasible and can accurately identify the structures in large-area remote sensing images.

Optimal Vibration Control of Adjacent Building Structures Interconnected by Viscoelastic Dampers

The objective of this paper is to investigate the dynamic characteristics of two adjacent building structures interconnected by viscoelastic dampers under seismic excitations. The computational procedure for an analytical model including the system model formulation, complex modal analysis and seismic time history analysis is presented for this purpose. A numerical example is also provided to illustrate the analytical model. The complex modal analysis is conducted to determine the optimal damping ratio, the optimal damper stiffness and the optimal damper damping of the viscoelastic dampers for each mode of the system. For the damper stiffness and damping with optimal values, the responses can be categorized into underdamped and critically damped vibrations. Furthermore, compared to the viscous dampers with only the energy dissipation mechanism, the viscoelastic dampers with both the energy dissipation and redistribution mechanisms are more effective for increasing the damping ratio of the system. The seismic time history analysis is conducted to assess the effectiveness of the viscoelastic dampers for vibration control. Based on the optimal damping ratio, the optimal damper stiffness, the optimal damper damping of the viscoelastic dampers for a certain mode of the system, and the viscoelastic dampers can be used to effectively suppress the root-mean-square responses as well as the peak responses of the two adjacent buildings.

Describe the Process of Retrofitting Existing Buildings and Evaluate the Effectiveness of it in Improving the Seismic Performance of Structures in Earthquake-prone Regions

At present,earthquakes are a serious problem for building.Severe damages and collapses of buildings were caused by earthquakes in different degrees.It is reported that there are more than 68,858 deaths and hundreds of billions RMB losses in the May 12,2008 Great Wenchuan Earthquake[16].So,more attention should be paid to seismic technology.In order to face the challenges of earthquake on building,the seismic retrofitting was put forward,which“is the modification of existing structures to make them more resistant to seismic activity,ground motion,or soil failure due to earthquakes”[2].

Examples of Application of Principle of Superposition in the Design of Structural Systems and in Static Analyses

The paper presents general description of combined structural system and initial analysis of an innovative system proposed as the main support structure for tall or heavy loaded buildings located on subsoil of very small load-carrying ability or in earthquake areas. Moreover there is presented also an innovative two-stage method of the approximate calculation of the statically indeterminate trusses. Both are invented by the author by application of the principles of the superposition method.

Discussion on seismic design of high-rise building structure in China

With the rapid development of China＇s economy, the modernization drive and the process of urbanization continue to advance, land for urban construction is becoming more and tenser and land prices are rising steadily, there are more and more high-rise buildings, its density is also increasing. With the increasing number trend of high-rise building development, anti-seismic building requirement as an important part of architectural design is worthy of our exploration and study. Seismic resistance has become an important subject of engineering design. This paper will discuss the technical principle of seismic design in building structure design, so as to optimize the seismic design of high-rise building structure better.

Comparison of the hygrothermal performance of two light-framed timber structure buildings under different operation modes

Light-framed timber structure(LTS)buildings have been highly valued in recent years due to their low-carbon characteristics.However,the applicability of the building envelope is closely related to indoor and outdoor conditions.The hot summer and cold winter(HSCW)climate zone in China has high humidity and great temperature variation throughout the year,resulting in distinct outdoor environments in different seasons.The indoor environment is greatly affected by energy-consumption patterns and window-opening habits,which largely depend upon the regulation operations of occupants.All these interrelated factors lead to extremely complex boundary conditions on each side of the building envelope.Whether the structures of LTS buildings are applicable in this climate zone,therefore,needs to be carefully considered.In this study,two LTS buildings with different envelopes were established in Haining,China,situated in the HSCW climate zone,and selected as the study objects.Different operation modes were adopted to create a variety of indoor environments.Under each condition,the processes of heat and moisture transfer within the building envelopes and the indoor environment were monitored and compared.The comparison indicated that the building envelope with high moisture storage and insulation ability maintained a relatively stable indoor environment,especially when the environment changed abruptly.Conversely,if the outdoor environment was equable(e.g.,relative humidity within the range of 30%–60%)or intermittent energy consumption modes were adopted,the building envelope with a low thermal inertia index and weak moisture-buffering ability performed better because it enabled a faster response of the indoor environment to air conditioning.Moreover,a high risk of moisture accumulation between the thermal insulation layer and other materials with a large water vapour transfer resistance factor was also identified,suggesting a higher requirement for the vapour insulation of the envelopes of LTS buildings.