Ultrafast dynamics of femtosecond laser-induced high spatial frequency periodic structures on silicon surfaces

Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than the diffraction limit,making it a useful method for efficient nanomanufacturing.However,compared with the low-spatial-frequency LIPSS(LSFL),the structure size of the HSFL is smaller,and it is more easily submerged.Therefore,the formation mechanism of HSFL is complex and has always been a research hotspot in this field.In this study,regular LSFL with a period of 760 nm was fabricated in advance on a silicon surface with two-beam interference using an 800 nm,50 fs femtosecond laser.The ultrafast dynamics of HSFL formation on the silicon surface of prefabricated LSFL under single femtosecond laser pulse irradiation were observed and analyzed for the first time using collinear pump-probe imaging method.In general,the evolution of the surface structure undergoes five sequential stages:the LSFL begins to split,becomes uniform HSFL,degenerates into an irregular LSFL,undergoes secondary splitting into a weakly uniform HSFL,and evolves into an irregular LSFL or is submerged.The results indicate that the local enhancement of the submerged nanocavity,or the nanoplasma,in the prefabricated LSFL ridge led to the splitting of the LSFL,and the thermodynamic effect drove the homogenization of the splitting LSFL,which evolved into HSFL.

Two-dimensional laser-induced periodic surface structures formed on crystalline silicon by GHz burst mode femtosecond laser pulses

Femtosecond laser pulses with GHz burst mode that consist of a series of trains of ultrashort laser pulses with a pulse interval of several hundred picoseconds offer distinct features in material processing that cannot be obtained by the conventional irradiation scheme of femtosecond laser pulses(single-pulse mode).However,most studies using the GHz burst mode femtosecond laser pulses focus on ablation of materials to achieve high-efficiency and high-quality material removal.In this study,we explore the ability of the GHz burst mode femtosecond laser processing to form laser-induced periodic surface structures(LIPSS)on silicon.It is well known that the direction of LIPSS formed by the single-pulse mode with linearly polarized laser pulses is typically perpendicular to the laser polarization direction.In contrast,we find that the GHz burst mode femtosecond laser(wavelength:1030 nm,intra-pulse duration:220 fs,intra-pulse interval time(intra-pulse repetition rate):205 ps(4.88 GHz),burst pulse repetition rate:200 kHz)creates unique two-dimensional(2D)LIPSS.We regard the formation mechanism of 2D LIPSS as the synergetic contribution of the electromagnetic mechanism and the hydrodynamic mechanism.Specifically,generation of hot spots with highly enhanced electric fields by the localized surface plasmon resonance of subsequent pulses in the bursts within the nanogrooves of one-dimensional LIPSS formed by the preceding pulses creates 2D LIPSS.Additionally,hydrodynamic instability including convection flow determines the final structure of 2D LIPSS.

MULTI-SCALE FE COMPUTATION FOR THE STRUCTURES OF COMPOSITE MATERIALS WITH SMALL PERIODIC CONFIGURATION UNDER CONDITION OF COUPLED THERMOELASTICITY

In this paper,the multi-scale computational method for a structure of composite materials with a small periodic configuration under the coupled thermoelasticity condition is presented. The two-scale asymptotic(TSA)expression of the displacement and the increment of temperature for composite materials with a small periodic configuration under the condition of thermoelasticity are briefly shown at first,then the multi-scale finite element algorithms based on TSA are discussed.Finally the numerical results evaluated by the multi-scale computational method are shown.It demonstrates that the basic configuration and the increment of temperature strongly influence the local strains and local stresses inside a basic cell.

WAVE PROPAGATION IN PIEZOELECTRIC/PIEZOMAGNETIC LAYERED PERIODIC COMPOSITES

This paper is concerned with the dynamic behaviors of wave propagation in layered periodic composites consisting of piezoelectric and piezomagnetic phases. The dispersion relations of Lamb waves axe derived. Dispersion curves and displacement fields are calculated with different piezoelectric volume fractions. Numerical results for BaTiO3/CoFe2O4 composites show that the dispersion curves resemble the symmetric Lamb waves in a plate. Exchange between the longitudinal （i.e. thickness） mode and coupled mode takes place at the crossover point between dispersion curves of the first two branches. With the increase of BaTiO3 volume fraction, the crossover point appears at a lower wave number and wave velocity is higher. These findings are useful for magnetoelectric transducer applications.

Wave localization in randomly disordered periodic layered piezoelectric structures

Considering the mechnoelectrical coupling, the localization of SH-waves in disordered periodic layered piezoelectric structures is studied. The waves propagating in directions normal and tangential to the layers are considered. The transfer matrices between two consecutive unit cells are obtained according to the continuity conditions. The expressions of localization factor and localization length in the disordered periodic structures are presented. For the disordered periodic piezoelectric structures, the numerical results of localization factor and localization length are presented and discussed. It can be seen from the results that the frequency passbands and stopbands appear for the ordered periodic structures and the wave localization phenomenon occurs in the disordered periodic ones, and the larger the coefficient of variation is, the greater the degree of wave localization is. The widths of stopbands in the ordered periodic structures are very narrow when the properties of the consecutive piezoelectric materials are similar and the intervals of stopbands become broader when a certain material parameter has large changes. For the wave propagating in the direction normal to the layers the localization length has less dependence on the frequency, but for the wave propagating in the direction tangential to the layers the localization length is strongly dependent on the frequency.

Large-area straight,regular periodic surface structures produced on fused silica by the interference of two femtosecond laser beams through cylindrical lens

Inhomogeneity and low efficiency are two important factors that limit the application of laser-induced periodic surface structures(LIPSSs),especially on glass surfaces.In this study,two-beam interference(TBI)of femtosecond lasers was used to produce large-area straight LIPSSs on fused silica using cylindrical lenses.Compared with those produced us-ing a single circular or cylindrical lens,the LIPSSs produced by TBI are much straighter and more regular.Depending on the laser fluence and scanning velocity,LIPSSs with grating-like or spaced LIPSSs are produced on the fused silica sur-face.Their structural colors are blue,green,and red,and only green and red,respectively.Grating-like LIPSS patterns oriented in different directions are obtained and exhibit bright and vivid colors,indicating potential applications in surface coloring and anti-counterfeiting logos.

ELASTIC WAVE LOCALIZATION IN TWO-DIMENSIONAL PHONONIC CRYSTALS WITH ONE-DIMENSIONAL QUASI-PERIODICITY AND RANDOM DISORDER

The band structures of both in-plane and anti-plane elastic waves propagating in two-dimensional ordered and disordered （in one direction） phononic crystals are studied in this paper. The localization of wave propagation due to random disorder is discussed by introducing the concept of the localization factor that is calculated by the plane-wave-based transfer-matrix method. By treating the quasi-periodicity as the deviation from the periodicity in a special way, two kinds of quasi phononic crystal that has quasi-periodicity （Fibonacci sequence） in one direction and translational symmetry in the other direction are considered and the band structures are characterized by using localization factors. The results show that the localization factor is an effective parameter in characterizing the band gaps of two-dimensional perfect, randomly disordered and quasi-periodic phononic crystals. Band structures of the phononic crystals can be tuned by different random disorder or changing quasi-periodic parameters. The quasi phononic crystals exhibit more band gaps with narrower width than the ordered and randomly disordered systems.

PROPAGATION BEHAVIORS OF SHEAR HORIZONTAL WAVES IN PIEZOELECTRIC-PIEZOMAGNETIC PERIODICALLY LAYERED STRUCTURES

This paper investigates shear horizontal （SH） waves propagating in a periodically layered structure that consists of piezoelectric （PE） layers perfectly bonded with piezomagnetic （PM） layers alternately. The explicit dispersion relations are derived for the two cases when the propagation directions of SH waves are normal to the interface and parallel to the interface, respectively. The asymptotic expressions for dispersion relations are also given when the wave number is extremely small. Numerical results for stop band effect and phase velocity are presented for a periodic system of alternating BaTiO3 and Terfenol-D layers. The influence of volume fraction on stop band effect and dispersion behaviors is discussed and revealed.

Two-scale finite element method for piezoelectric problem in periodic structure

The prediction of the mechanical and electric properties of piezoelectric fibre composites has become an active research area in recent years. By means of introducing a boundary layer problem, some new kinds of two-scale finite element methods for solutions to the electric potential and the displacement for composite material in periodic struc- ture under the coupled piezoelectricity are derived. The coupled two-scale relation of the electric potential and the displacement is set up, and some finite element approximate estimates and numerical examples which show the effectiveness of the method are presented.

The Two-dimensional Electromagnetic Scattering from Periodic Chiral Structures and Its Finite Element Approximation

In this paper, we consider the electromagnetic scattering from periodic chiral structures. The structure is periodic in one direction and invariant in another direction. The electromagnetic fields in the chiral medium are governed by the Maxwell equations together with the Drude-Born-Fedorov equations. We simplify the problem to a two-dimensional scattering problem and we show that for all but possibly a discrete set of wave numbers, there is a unique quasi-periodic weak solution to the diffraction problem. The diffraction problem can be solved by finite element method. We also establish uniform error estimates for the finite element method and the error estimates when the truncation of the nonlocal transparent boundary operators takes place.

A transparent electromagnetic-shielding film based on one-dimensional metal–dielectric periodic structures

In this study, we designed and fabricated optical materials consisting of alternating ITO and Ag layers. This approach is considered to be a promising way to obtain a light-weight, ultrathin and transparent shielding medium, which not only transmits visible light but also inhibits the transmission of microwaves, despite the fact that the total thickness of the Ag film is much larger than the skin depth in the visible range and less than that in the microwave region. Theoretical results suggest that a high dielectric/metal thickness ratio can enhance the broadband and improve the transmittance in the optical range. Accordingly, the central wavelength was found to be red-shifted with increasing dielectric/metal thickness ratio. A physical mechanism behind the controlling transmission of visible light is also proposed. Meanwhile, the electromagnetic shielding effectiveness of the prepared structures was found to exceed 40 dB in the range from 0.1 GHz to 18 GHz, even reaching up to 70 dB at 0.1 GHz, which is far higher than that of a single ITO film of the same thickness.

Symplectic analysis for wave propagation in one-dimensional nonlinear periodic structures

The wave propagation problem in the nonlinear periodic mass-spring structure chain is analyzed using the symplectic mathematical method. The energy method is used to construct the dynamic equation, and the nonlinear dynamic equation is linearized using the small parameter perturbation method. Eigen-solutions of the symplectic matrix are used to analyze the wave propagation problem in nonlinear periodic lattices. Nonlinearity in the mass-spring chain, arising from the nonlinear spring stiffness effect, has profound effects on the overall transmission of the chain. The wave propagation characteristics are altered due to nonlinearity, and related to the incident wave intensity, which is a genuine nonlinear effect not present in the corresponding linear model. Numerical results show how the increase of nonlinearity or incident wave amplitude leads to closing of transmitting gaps. Comparison with the normal recursive approach shows effectiveness and superiority of the symplectic method for the wave propagation problem in nonlinear periodic structures.

Novel mechanical behavior of periodic structure with the pattern transformation

Abstract In periodic cellular structures, novel pattern transformations are triggered by a reversible elastic instability under the axial compression. Based on the deformation-triggered new pattern, periodic cellular structures can achieve special mechanical properties. In this paper, the designed architecture materials which include elastomer matrixes containing empty holes or filled holes with hydrogel material are modeled and simulated to investigate the mechanical property of the periodic materials. By analyzing the relationship between nominal stress and nominal strain of periodic material, and the corresponding deformed patterns, the influence of geometry and shapes of the holes on the mechanical property of architecture material is studied in more details. We hope this study can provide future perspectives for the deformation-triggered periodic structures.

Femtosecond laser-induced periodic structures:mechanisms, techniques, and applications

Over the past two decades,femtosecond laser-induced periodic structures(femtosecond-LIPSs)have become ubiquitous in a variety of materials,including metals,semiconductors,dielectrics,and polymers.Femtosecond-LIPSs have become a useful laser processing method,with broad prospects in adjusting material properties such as structural color,data storage,light absorption,and luminescence.This review discusses the formation mechanism of LIPSs,specifically the LIPS formation processes based on the pump-probe imaging method.The pulse shaping of a femtosecond laser in terms of the time/frequency,polarization,and spatial distribution is an efficient method for fabricating high-quality LIPSs.Various LIPS applications are also briefly introduced.The last part of this paper discusses the LIPS formation mechanism,as well as the high-efficiency and high-quality processing of LIPSs using shaped ultrafast lasers and their applications.

Observations of TEC Depletion,Periodic Structure of TEC,ROTI and Scintillation Associated with ESF Irregularities over South China

The observations of Global Positioning System(GPS) scintillation,Total Electron Content(TEC)depletion,the periodic structure of TEC and Rate of TEC Index(ROTI) over south China were presented.Data were collected from GPS observations at stations of Shenzhen and Guangzhou from 2011 to 2012.This study reported that the ratio of simultaneous occurrences of TEC depletions with strong scintillations was higher than that of TEC depletions with weak scintillations in vernal and autumnal equinoxes of 2011 over South China.The number of the periodic structures of TEC with depletion contained was greater than that with no depletion contained corresponding to strong scintillations.The structure of the slab of plasma irregularities could be responsible for the simultaneous occurrences of TEC depletion with strong scintillations and ROTI.Before and during the occurrences of strong scintillation,there was Large-Scale Wave Structure(LSWS) which provided the seed ionization perturbation to trigger ESF irregularities and contributed to the periodic structure of TEC.

An Integral Equation Method for Electromagnetic Scattering by a Periodic Chiral Structure

In this paper, we consider the electromagnetic scattering by a periodic chiral structure. The media is homogeneous and the structure is periodic in one direction and invariant in another direction. The electromagnetic fields inside the chiral medium are governed by Maxwell equations together with the Drude-BornFedorov equations. We simplify the problem to a two-dimensional scattering problem and discuss the existence and the uniqueness of solutions by an integral equation approach. We show that for all but possibly a discrete set of wave numbers, the integral equation has a unique solution.

FILTERING CHARACTERISTICS AND EXPERIMENTAL INVESTIGATION OF ONE-DIMENSIONAL PERIODIC RODS

Passive periodic structures exhibit unique dynamic characteristics that make the passive periodic structures act as mechanical filters for wave propagation. As a result, wave can propagate along the periodic structures only within specific frequency bands called the pass bands and wave propagation is completely blocked within other frequency bands called the “stop bands”. A theoretical method based on the transfer matrix formulation is developed in order to effectively investigate the influence of periodicity, variable geometry and material properties on the wave propagation characteristics of one-dimensional periodic rod. Several numerical examples are presented in order to illustrate their unique tunable filtering and localization characteristics. The experiments are conducted to verify the numerical predictions and to demonstrate the capability of the wavelet transform as a very powerful tool to uniquely identify and compare the energy distribution both in the time and frequency domain. The flexibility that the spectral width and location of the pass and stop bands can be tuned by introducing intentional variation in geometric and material properties for the individual substructure or cell is identified completely by both numerical predictions and experimental results. The results demonstrate the potential of such one-dimensional periodic structure in controlling the dynamics of wave propagation as a mechanical filter such as engine mount, gearbox support strut and other applications.

Manipulating Backward Propagation of Acoustic Waves by a Periodical Structure

In the backward propagation of acoustic waves, the direction of phase velocity is anti-parallel to that of group velocity. We propose a scheme to manipulate the backward propagation using a periodicM structure. The dynamic backward propagation process is further experimentally observed. It is demonstrated that the oblique incident plane wave moves backward when it travels through the periodical structure and the backward shift can be controlled within a certain range.

Second-order two-scale computational method for ageing linear viscoelastic problem in composite materials with periodic structure

The correspondence principle is an important mathematical technique to compute the non-ageing linear viscoelastic problem as it allows to take advantage of the computational methods originally developed for the elastic case. However, the correspon- dence principle becomes invalid when the materials exhibit ageing. To deal with this problem, a second-order two-scale （SOTS） computational method in the time domain is presented to predict the ageing linear viscoelastic performance of composite materials with a periodic structure. First, in the time domain, the SOTS formulation for calcu- lating the effective relaxation modulus and displacement approximate solutions of the ageing viscoelastic problem is formally derived. Error estimates of the displacement ap- proximate solutions for SOTS method are then given. Numerical results obtained by the SOTS method are shown and compared with those by the finite element method in a very fine mesh. Both the analytical and numerical results show that the SOTS computational method is feasible and efficient to predict the ageing linear viscoelastic performance of composite materials with a periodic structure.

THE MUTUAL VARIATIONAL PRINCIPLE OF FREE WAVE PROPAGATION IN PERIODIC STRUCTURES

By taking infinite periodic beams as examples,the mutual variational principle for analyzing the free wave propagation in periodic structures is established and demonstrated through the use of the propaga- tion constant in the present paper,and the corresponding hierarchical finite element formulation is then de- rived.Thus,it provides the numerical analysis of that problem with a firm theoretical basis of variational prin- ciples,with which one may conveniently illustrate the mathematical and physical mechanisms of the wave prop- agation in periodic structures and the relationship with the natural vibration.The solution is discussed and ex- amples are given.