Structural Types of Sea Embankment and Their Stability Analysis

In this paper based on investigation on the structural types of sea embankments in the southeast coastal area of China, as well as the related tidal stages, waves and strength of marine soils, the finite element method (FEM) calculations for seepage flow stability, including the overall stability against sliding and local stability of sloping surface under the action of tidal stage and waves are carried out. A comparison of the computational results of FEM for single circular slip, composite circular slip and geogrid reinforcement against sliding shows that for calculation of stability against sliding of marine soft soil foundation it is even more reasonable to use the composite circular slip. The stability of sloping type sea embankment against sliding is slightly better than that of the vertical face type; for the combination of three defences (wave, scour and seepage defences) the sea embankment structural type of a composite cross section with a platform should be a good one, but it still should be suitable to local conditions. For the local stability of riprap slope blocks and wall face loose masonry blocks, according to the analyses of wave-induced seepage flow fields, calculating formulas are given and they are verified by model test on block stability of breakwaters.

Basic Types and Structural Characteristics of Uplifts:An Overview of Sedimentary Basins in China

The uplift is a positive structural unit of the crust. It is an important window for continental dynamics owing to its abundant structural phenomena, such as fault, fold, unconformity and denudation of strata. Meanwhile, it is the very place to store important minerals like oil, natural gas, coal and uranium. Giant and large-scale oil and gas fields in China, such as the Daqing Oilfield, Lunnan-Tahe Oilfield, Penglai 19-3 Oilfield, Puguang Gas Field and Jingbian Gas Field, are developed mainly on uplifts. Therefore, it is the main target both for oil and gas exploration and for geological study. The uplift can be either a basement uplift, or one developed only in the sedimentary cover. Extension, compression and wrench or their combined forces may give rise to uplifts. The development process of uplifting, such as formation, development, dwindling and destruction, can be taken as the uplifting cycle. The uplifts on the giant Precambrian cratons are large in scale with less extensive structural deformation. The uplifts on the medium- and small-sized cratons or neo-cratons are formed in various shapes with strong structural deformation and complicated geological structure. Owing to changes in the geodynamic environment, uplift experiences a multi-stage or multi-cycle development process. Its geological structure is characterized in superposition of multi-structural layers. Based on the basement properties, mechanical stratigraphy and development sequence, uplifts can be divided into three basic types-the succession, superposition and destruction ones. The succession type is subdivided into the maintaining type and the lasting type. The superposition type can be subdivided into the composite anticlinal type, the buried-hill draped type, the faulted uplift type and the migration type according to the different scales and superimposed styles of uplifts in different cycles. The destruction type is subdivided into the tilting type and the negative inverted type. The development history of uplifts and their controlling effects on sedimentation and fluids are quite different from one another, although the uplifts with different structural types store important minerals. Uplifts and their slopes are the main areas for oil and gas accumulation. They usually become the composite oil and gas accumulation zones （belts） with multiple productive formations and various types of oil and gas reservoirs.

Structural features and exploration targets of platform margins in Sinian Dengying Formation in Deyang-Anyue Rift, Sichuan Basin, SW China

Based on the seismic, logging, drilling and other data, the distribution, structural types and mound-shoal hydrocarbon accumulation characteristics of platform margins of the Sinian Dengying Formation in the Deyang-Anyue Rift and its periphery were analyzed. Four types of platform margins are developed in the Dengying Formation, i.e., single-stage fault-controlled platform margin, multi-stage fault-controlled platform margin, gentle slope platform margin, and overlapping platform margin. In the Gaoshiti West-Weiyuan East area, single-stage fault controlled platform margins are developed in the Deng 2 Member, which trend in nearly NEE direction and are shielded by faults and mudstones, forming fault-controlled–lithologic traps. In the Lezhi-Penglai area, independent and multi-stage fault controlled platform margins are developed in the Deng 2 Member, which trend in NE direction and are controlled by synsedimentary faults;the mound-shoal complexes are aggraded and built on the hanging walls of the faults, and they are shielded by tight intertidal belts and the Lower Cambrian source rocks in multiple directions, forming fault-controlled–lithologic and other composite traps. In the Weiyuan-Ziyang area, gentle slope platform margins are developed in the Deng 2 Member, which trend in NW direction;the mound-shoal complexes are mostly thin interbeds as continuous bands and shielded by tight intertidal belts in the updip direction, forming lithologic traps. In the Gaoshiti-Moxi-Yanting area, overlapping platform margins are developed in the Deng 2 and Deng 4 members;the mound-shoal complexes are aggraded and overlaid to create platform margin buildup with a huge thickness and sealed by tight intertidal belts and the Lower Cambrian mudstones in the updip direction, forming large-scale lithologic traps on the north slope of the Central Sichuan Paleouplift. To summarize, the mound-shoal complexes on the platform margins in the Dengying Formation in the Penglai-Zhongjiang area, Moxi North-Yanting area and Weiyuan-Ziyang area are large in scale, with estimated resources of 1.58×1012 m3, and they will be the key targets for the future exploration of the Dengying Formation in the Sichuan Basin.

AN ANALYSIS ON THE STRUCTURE TYPES AND BENEFITS OFSLOPELAND AGROFORESTRY SYSTEMS-Taking the Three Gorge Reservoir Area As An Example

The modem term 'agroforestry system' is derived from agricultural practices. It is an organic combination of agriculture and forestry, ecology and economy, product variation and scientific management. On the basis of analyzing the types and structure of agroforestry system in the Three Gorges Reservoir area,the paper poins out that agroforestry system can be divided into diffend structutal levds. Taking some typical cases as examples, it compares the benefits of four kinds of structures. The result illustrates that the hedge row agroforestry system on slopeland is an effective way to realize coordinate development of ecology and economy.

Influence of Structural Modification on Work-hardening Behaviour of Type 316 Stainless Steel

Work-hardening behaviour of type 316 austenitic stainless steel having difFerent initial dislocation structures introduced by swaging to various levels is analysed by a simplified Kock's model which takes into account the structural changes through the dislocation accumulation and annihilation process during deformation. The dislocation accumulation and annihilation factors show a temperature and structure dependence. The dislocation annihilation factor shows a plateau or decreasing tendency in the dynamic strain ageing (DSA) temperature range. This is attributed as either due to dislocation accumulation being more pronounced than dislocation annihilation or as due to precipitates being formed at DSA temperatures acting as obstacles to dislocation motion in the DSA temperature range.

A Study of Plume Rise from Multi-tube Chimney and Types of Chimney Structure

This paper tries to determine the economical type of reinforced concrete chimney structure based on the same effective height of chimney. The simulated experiments of wind tunnel are performed for the study, which compare multi-tube chimney with single tube chimney based on the same buoyancy flux of plume. According to the comparison among the experiment results and the previous study of plume rise, the paper defines some final plume rise models. Finally, the paper gives the cost-benefit analysis after making cost estimation for different types of chimney structure and recommends the economical and reasonable type of chimney structure in light of the same environmental benefits.

Automatic identifcation of building structure types using unmanned aerial vehicle oblique images and deep learning considering facade prior knowledge

Building structural type information is the foundation for seismic risk assessment and management since it reflects the behavior of buildings under seismic load.However,in earthquake-prone regions,most of this information is out-of-date or nonexistent.This paper proposes a deep learning-based method for automatically identifying building structural types from unmanned aerial vehicle(UAV)oblique images.The method consists of four steps:(1)collect facades of buildings with different structural types by web crawler technology as a sample set;(2)construct a convolutional neural network with a facade prior knowledge attention branch and train the model using the sample set;(3)extract building facades from UAV oblique images based on the georeferencing results of feature points as the test set;(4)identify building structural types by inputting the test set into the trained model.Three cases have been selected to verify the feasibility and applicability of the method.The average recall rate of 85%and the average F1 score of 83%have been achieved in areas with regular building distribution.This method integrates multidisciplinary knowledge to provide a solution for rapid collection of building vulnerability information,and expands the role of oblique photography data in urban management and disaster prevention planning.

Study on Structure of Arched Longitudinal Beams of Deep-Water Wharf

High-pile and beam-slab quays have been widely used after several years development. They are mature enough to be one of the most important structural types of wharves in China coastal areas. In order to accommodate large tonnage vessels, wharves should be eorrstructed in deep water gradually. However, conventional high-pile and beam-slab structares are hard to meet the requirements of large deep-water wharf. According to arch＇ s stress characteristics, a new type of wharf with catenary arched longitudinal beams is presented in this paper. The new wharf structure can make full use of arch＇s overhead crossing and reinforced concrete compression resistance, improve the interval between transverse bents greatly, and decrease underwater construction quantity. Thus, the construction cost cab be reduced. Take the third phase project of the Yangshan Deep-water Port for example, comparative analysis on catenary arched longitudinal beams and conventional longitudinal beams has been made. The result shows that with the same wharf length and width, the same loads and same longitudinal beam moment, catenary arch structure can improve the interval between bents up to 28 m, decrease the nmnber of piles and underwater construction quantity.

New cadmium and rare earth metal tungstates with the scheelite type structure

New cadmium and rare earth metal tungstates with the formula Cd0.25RE0.50 0.25WO4 （RE=Nd, Sin, Eu, Gd, D-statistical distrib- uted vacancies in cation sublattice） were synthesized by the solid-state reaction between CdWO4 and corresponding RE2W209. The obtained phases crystallize in the scheelite type structure. The Cd0.25RE0.5 0.25WO4 compounds were characterized by X-ray diffractometer （XRD）, （DTA-TG）, infrared （IR） and EPR methods.

Synthesis and Electronic Structure of A2B Type Halogen Atoms Substituted H3-Triarylcorroles

Seven electron-deficient A_2 B type H_3-triarylcorroles have been synthesized and characterized. The solvent dependence of the electronic absorption and magnetic circular dichroism（MCD） spectra and a series of TD-DFT calculations have been used to analyze trends in the electronic structures. Significant differences are observed in the optical spectra when solvents of differing polarity are used,which can be assigned to the effect of NH-tautomerism.

Earthquake-resistant performance investigation for rural buildings in Zhongxiang area, China

We carried out a census of the rural residential buildings of Zhongxiang area＇ s 17 towns. Next, we conducted a sample survey in four townships： Huji, Shipai, Zhangji, and Jiuli. According to the census and sample survey data of the rural residence buildings, we evaluated the quality and earthquake-resistant performance of the rural buildings for the various local rural residential structural types. The results showed that there are four main factors affecting the seismic performance of the local rural residences ： （ 1 ） Foundations are not made appropriately （ such as by compaction or some other fill） but are built directly in the farming soil. （2） Seismic measures are not completely implemented. Structure construction measures are not in place at the junction of the vertical and horizontal wall. The vertical wall joints are not the result of the same masonry techniques as the horizontal joints. There are no lintels above the door and window openings, or if there are any, the length of the lintels is less than 240 mm. （3） The brick masonry wall has low strength. The greatest housing wall mortar strength is between M0. 4 - 1.5, much lower than the strength of the brick. （4） The building material and construction quality are poor. The quality of the mortar masonry wall is poor. The cracks between the bricks are uneven, even in the seams.

Structure and Magnetic Properties of Y(Fe_(1-x)Co_x)_ (11.3) Nb_(0.7)

The structure and magnetic properties of the intermetallic compounds Y(Fe 1- x Co x ) 11.3 Nb 0.7 ( x =0, 0 05, 0 1, 0 2) were studied by X ray diffraction and magnetic property measurements. X ray diffraction patterns and thermomagnetic curves show that all compounds almost exhibit single phase. All Y(Fe 1- x Co x ) 11.3 Nb 0.7 compounds ( x =0, 0 05, 0 1, 0 2) crystallize in ThMn 12 type structure. Substitution of Co for Fe leads to a clear increasing of Curie temperature and a monotonic decreasing of lattice constants. At room temperature the composition dependence of saturation magnetization exhibits a maximum at about x =0 1～0 2. The magnetocrystalline anisotropy field at room temperature at first increases and then decreases with the increasing of Co content.

Synthesis and Characterization of Charge-transfer Complexes of Aminoethylphosphono-and Dimethylaminoethylphosphono-heteropolytungstic Acids of Keggin Type Structure

Two charge-transfer complexes of 2a and 2b of Keggin type were synthesized and characterized by elemental analysis, IR spectra, UV spectra, XRD, TG-DSC; and were compared with Hquin-PW12. The primary structure of the heteropolyanions had not been changed after the formation of the charge transfer complexes.

Structures and Spectroscopy Properties of One Novel Keggin Type Polyoxomolybdate Compound

In this paper,One novel Keggin type polyoxomolybdate compounds have been hydrothermal synthesized:{[(CH3)2NH2]4(SiMo12O40)}[(CH3)2NH]·(DMF)0.5(1).The compound 1have been characterized by infrared spectrum,and the two-dimensional infrared correlation spectroscopy.

A NEW TYPE OF CHAIN COMPOUND,STRUCTURE OF TA_4(TE_2)_4TE_4I

Ta_4(Te_2)_4Te_4I,Mr=2381.90,Monoclinic,C2/c,a=21.987(2),b=6.153(2),c= 19.936(3),β=122.42(14),V=2276.7 ~3,z=4,Dm=6.8(5)g/cm^3,Dc=6.95g/cm^3,λ(Mok)= 0.71073,μ=354.0cm^(-1),F(000)=3876,T=296(1)k,R=5.3%,Rw=6.8%,for 1118 unique observed reflections(1>3σ(Ⅰ)).The structure is composed of [Ta_4(Te_2)_4Te_4I]_∞~ chains,which are formed by the four-nuclear butterfly cluster units "Ta_4(Te_2)_4Te_4" with the Ⅰ atoms as the bridging atoms between different cluster units.

Band Structure and Optical Gain of InGaAs/GaAsBi Type-Ⅱ Quantum Wells Modeled by the k·p Model

Optical gains of type-Ⅱ In Ga As/Ga As Bi quantum wells（QWs） with W, N, and M shapes are analyzed theoretically for near-infrared laser applications. The bandgap and wave functions are calculated using the self-consistent k·p Hamiltonian, taking into account valence band mixing and the strain effect. Our calculations show that the M-shaped type-Ⅱ QWs are a promising structure for making 1.3 um lasers at room temperature because they can easily be used to obtain 1.3 um for photoluminescence with a proper thickness and have large wave-function overlap for high optical gain.

STRUCTURE OF MOLECULAR COMPOUND CRYSTAL A_2B(A =1, 6, 7, 8,-TETRA-PHENYL (3, 4-BENZO)BICYCLO[4, 2, 0]OCTA-7-ENE, B=CIS, CIS-1,2,3,4,-TETRAPHENYLBUTADIENE)

C100H78, (A: C36H28, B: C28H22) Mr = 1279. 74, monoclinic, P21/a, a=17. 282(3), b=10. 669(4), c= 19, 927(3) A , β =102. 99(1)°,V = 3580. 1(2) A3, Z=2, μ(MoKα) = 0. 623cm-1, F(000) = 1356, Dc=1. 187g/cm3, room temperature. The final R=0. 084, Rw = 0. 086 for 1255 independent observed reflections (I≥3σ(I)). Owing to the existence of 1,6,7, 8-Tetraphenyl (3,4-benzo)-bicyclo[4, 2, 0]octa-7-ene(A) , cis, cts-1, 2, 3, 4-Tetraphenylbutadiene (B) in A2B can take the different conformation from the one in the pure B crystal. The reason of the formation of this molecular compound crystal is put forward.

Time Symmetry Analysis of Nonlinear Parity Based on S-P Compensation Network Structure

The wireless power transmission system based on nonlinear parity time symmetry is a robust sys-tem that can maintain high-efficiency transmission at a certain distance.Parity-Time Symmetry(PT symmetry)wireless power transfer system,due to its insensitivity to the position of the coupled resonant coil over a large range,can carry out constant power transfer to the load,and through coupled mode theory The PT symmetrical wireless power transmission circuit with S-P structure is analyzed,and the system has different transmission efficiencies in different coupling intervals,and the transmission effect of the structure at different distances is studied with the change of coupling coefficient.Then,the simulation is carried out by MATLAB and origin software.The final results show that the transmission efficiency does not change with the coupling coefficient in the strong coupling region and can maintain high-efficiency transmission.In the weak coupling region,the coupling coefficient has a great influence on the transmission efficiency of the system.

A-DA’D-A Type Pentacyclic Small Molecule Acceptors to Exceed 16.5%Efficiency by Heteroatom Effect at the Outer Side Chain

Comprehensive Summary In this work,we adopt a“heteroatom side-chains”modification strategy to modify the thiophene units in A-DA'D-A(acceptor-donor-acceptor’-donor-acceptor)type pentacyclic SMAs(small molecule acceptors),that is,introducing branched alkyl chain at theβ-position of thiophene instead of straight alkyl chain,and then introducing oxygen atom at the third-position on the basis of branched chain.Two new pentacyclic SMAs(BZ4F-EH and BZ4F-OEH)were synthesized,and the influence of the heteroatom side-chains on photoelectric properties of A-DA'D-A type pentacyclic SMAs was systematically studied.Compared with our previously reported BZ4F(Y26),BZ4F-EH shows slightly blue-shifted absorption,while BZ4F-OEH has obvious red-shifted absorption.As a result,BZ4F-OEH-based binary device achieved a high power conversion efficiency(PCE)of 16.56%with a fill factor(FF)of 79.3%,which is the highest efficiency of pentacyclic SMAs to date.