Structure optimization of the organ-pipe cavitating nozzle and its erosion ability test on hydrate-bearing sediments

Cavitating jet is a promising drilling rate improvement technology in both the marine natural gas hydrate (NGH) fluidization exploitation method and the integrated radial jet drilling and completion method. In present study, we aim to improve the efficiency of jet erosion and extracting NGH. With a computational fluid dynamics (CFD) method, the pressure, velocity and cavitation field characteristics of organ-pipe cavitating jet (OPCJ) are analysed. The divergent angle, throat length, and divergent length of OPCJ nozzle are preferred to obtain stronger jet cavitation erosion effect. Laboratory experiments of gas hydrate-bearing sediments (GHBS) erosion by OPCJ and conical jet (CJ) are conducted to compare and validate the jet erosion performance. The impinging models of OPCJ and CJ are constructed to study the impact characteristics. Results show that the preferred values of divergent angle, throat length, and divergent length are 15°, 1d, and 3d, respectively, in present simulation conditions. For GHBS, the OPCJ possesses the advantages of high efficiency and low energy consumption. Moreover, the OPCJ has higher penetration efficiency, while showing equivalent penetration ability compared to CJ. During the impinging process, the OPCJ can induce stronger impact pressure and turbulence effect, and also shows stronger chambering effect and bottom cleaning ability compared to CJ. This study presents the erosion performance of OPCJ and CJ on GHBS, and provides preliminary insights on the potential field applications in NGH exploitation.

Design and Structure Optimization of Plenum Chamber with Airfoil Baffle to Improve Its Outlet Velocity Uniformity in Heat Setting Machines

The plenum chamber of a heat setting machine is a key structure for distributing hot air to different air channels.Its outlet velocity uniformity directly determines the heating uniformity of textiles,significantly affecting the heat setting performance.In a traditional heat setting machine,the outlet airflow maldistribution of the plenum chamber still exists.In this study,a novel plenum chamber with an airfoil baffle was established to improve the uniformity of the velocity distribution at the outlet in a heat setting machine.The structural influence of the plenum chamber on the velocity distribution was investigated using a computational fluid dynamics program.It was found that a chamber with a smaller outlet partition thickness had a better outlet velocity uniformity.The structural optimization of the plenum chamber was conducted using the particle swarm optimization algorithm.The outlet partition thickness,the transverse distance and the longitudinal distance of the optimized plenum chamber were 20,686.2 and 274.6 mm,respectively.Experiments were carried out.The experimental and simulated results showed that the optimized plenum chamber with an airfoil baffle could improve the outlet velocity uniformity.The air outlet velocity uniformity index of the optimized plenum chamber with an airfoil baffle was 4.75%higher than that of the plenum chamber without an airfoil baffle and 5.98%higher than that of the conventional chamber with a square baffle in a commercial heat setting machine.

Fault Analysis and Structure Optimization of Traveling Transmission System of Shuttle Car

This paper firstly introduces the common faults of traveling transmission system of shuttle car.Secondly,by analyzing the characteristics of shuttle car structure,the layout of traveling transmission system and the common faults on shuttle car,this paper concludes that"internal holding torque"is the main cause of faults.Finally,this paper proposes a corresponding optimization design scheme to reduce the impact of"internal torque",and calculates the relevant results through the finite element simulation analysis method.Through these analyses and calculations,it is shown that the method can effectively reduce the probability of failure of traveling transmission system of shuttle car.

Structure optimization of gas-liquid combined loop reactor using a CFD-PBE coupled model

Flow characteristics, such as flow pattern, gas holdup, and bubble size distribution, in an internal loop reactor with external liquid circulation, are simulated to investigate the influence of reactor internals by using the computational fluid dynamics （CFD）-population balance equations （PBE） coupled model. Numerical results reveal that introducing a downcomer tube and a draft tube can help to improve the mass and heat transfer of the reactor through enhanced liquid circulation, increased gas holdup and reduced bubble diameter. The hydrodynamic behavior in the internal loop reactor with external liquid circulation can be managed effectively by adjusting the diameter and axial position of the draft tube.

Agricultural Production Structure Optimization: A Case Study of Major Grain Producing Areas, China

A large number of mathematical models were developed for supporting agricultural production structure optimization decisions; however, few of them can address various uncertainties existing in many factors （e.g., eco-social benefit maximization, food security, employment stability and ecosystem balance）. In this study, an interval-probabilistic agricultural production structure optimization model （IPAPSOM） is formulated for tackling uncertainty presented as discrete intervals and/or probability distribution. The developed model improves upon the existing probabilistic programming and inexact optimization approaches. The IPAPSOM considers not only food security policy constraints, but also involves rural households’income increase and eco-environmental conversation, which can effectively reflect various interrelations among different aspects in an agricultural production structure optimization system. Moreover, it can also help examine the reliability of satisfying （or risk of violating） system constraints under uncertainty. The model is applied to a real case of long-term agricultural production structure optimization in Dancheng County, which is located in Henan Province of Central China as one of the major grain producing areas. Interval solutions associated with different risk levels of constraint violation are obtained. The results are useful for generating a range of decision alternatives under various system benefit conditions, and thus helping decision makers to identify the desired agricultural production structure optimization strategy under uncertainty.

Study of Temperature Field and Structure Optimization for Runways in Permafrost Regions

Pavement construction in permafrost regions is complicated by the fact that the permafrost properties are influenced by the temperature and are extremely unstable.The numerical model for runway structures in permafrost regions is applied to analyze the time–space characteristics of the temperature field and the depth of the frozen layer.The influence of the installation layer is studied to enable structural optimization of the runway.Numerical results show that the temperature stabilization depth,low-and high-temperature interlayer response ranges,and maximum depth of the frozen layer are greater in runway engineering than in highway and railway engineering.The time history curves for the pavement and natural surface are similar,and the development of freezing and thawing is approximately linear.The pavement and natural surface have similar thawing rates,but the freezing rate of the natural surface is faster than that of the pavement.The depth of the frozen layer and the time of the frozen are greater for the natural surface than for the pavement.The installation layer helps to stabilize the temperature of the subgrade and reduces the freezing and thawing rates.This study provides technical support for the design and maintenance of runways in permafrost regions.

Finite Element Analysis for the Structure Optimization Design of the CPUE Load-Bearing Wheel of Tracked Vehicle

A new kind of material cast polyurethane elastomers (CPUE) is introduced to take the place of rubber on load bearing wheel for the first time. Based on load bearing wheel dimensions, material properties and operating conditions, the structure of wheel flange is optimized by zero order finite element method. A detailed three dimensional finite element model of flange of load bearing wheel is developed and utilized to optimize structure of wheel flange. Its service life, which is affected by flange structure parameter, is analyzed by comparing the optimization results with those of prototype of wheel. The results of optimization are presented and the stress field of load bearing wheel in optimal dimension obtained by using finite element analysis method is demonstrated. The finite element analysis and optimization results show that the CPUE load bearing wheel is feasible and suitable for the tracked vehicle and has a guiding value in practice of the weighting design of the whole tracked vehicle.

The structure optimization of gas-phase surface discharge and its application for dye degradation

A gas-phase surface discharge（GSD）was employed to optimize the discharge reactor structure and investigate the dye degradation.A dye mixture of methylene blue,acid orange and methyl orange was used as a model pollutant.The results indicated that the reactor structure of the GSD system with the ratio of tube inner surface area and volume of 2.48,screw pitch between a high-voltage electrode of 9.7 mm,high-voltage electrode wire diameter of 0.8 mm,dielectric tube thickness of2.0 mm and tube inner diameter of 16.13 mm presented a better ozone（O_3）generation efficiency.Furthermore,a larger screw pitch and smaller wire diameter enhanced the O_3generation.After the dye mixture degradation by the optimized GSD system,73.21%and 50.74%of the chemical oxygen demand（COD）and total organic carbon removal rate were achieved within 20 min,respectively,and the biochemical oxygen demand（BOD）and biodegradability（BOD/COD）improved.

Analysis of mechanical response of fistula plug for structure optimization

Anal fistula is one of the three greatest anorectal diseases with a high prevalence. The traditional treatments（e.g., surgery） for fistula have limitations due to damage to the internal anal sphincter of patients. With recent advances in biomaterials, treatments based on biomaterial filling （e.g., scleraprotein injection, fistula plug） have emerged as novel therapies for fistula. The anal fistula plug （e.g., based on small intestinal submucosa （SIS）） has attracted increasing attention because of short term healing rate and biocompatibility. However, challenges remain for this method such as plug falling as observed in clinics. To address this, this paper analyzes the case of SIS falling under physiological condition from mechanical point of view using ANSYS simulation. It then proposes three new geometrical structures for fistula plug and compares their mechanical behavior （e.g., axial stress, reaction of constraint） with that of clinically used structure （cone shape）. Based on the simulation, it optimizes the geometric parameters of fistula plug. The approach developed here can help to improve the design of fistula plug for better clinical treatments.

Hydraulic Self Servo Swing Cylinder Structure Optimization and Dynamic Characteristics Analysis Based on Genetic Algorithm

The dynamic characteristics of hydraulic self servo swing cylinder were analyzed according to the hydraulic system natural frequency formula. Based on that,a method of the hydraulic self servo swing cylinder structure optimization based on genetic algorithm was proposed in this paper. By analyzing the four parameters that affect the dynamic characteristics, we had to optimize the structure to obtain as larger the Dm( displacement) as possible under the condition with the purpose of improving the dynamic characteristics of hydraulic self servo swing cylinder. So three state equations were established in this paper. The paper analyzed the effect of the four parameters in hydraulic self servo swing cylinder natural frequency equation and used the genetic algorithm to obtain the optimal solution of structure parameters. The model was simulated by substituting the parameters and initial value to the simulink model. Simulation results show that: using self servo hydraulic swing cylinder natural frequency equation to study its dynamic response characteristics is very effective.Compared with no optimization,the overall system dynamic response speed is significantly improved.

Vibration Characteristics Analysis and Structure Optimization of Catenary Portal Structure on Four-Wire Bridge

The portal structure is the support equipment in the catenary,which bears the load of contact suspension and support equipment.In practical work,with the change of external forces,the support equipment bears complex and changeable loads,so it has higher requirements for its reliability and safety.In order to study the dynamic characteristics of catenary portal structure on continuous beam of four-way bridge,taking the catenary portal structure on Dshaping four-way bridge as the research object,the portal structure simulation model of bridgenetwork integration was established in Midas Civil.The maximum point of deformation and stress was determined by finite element analysis of catenary hard span equipment,and the frequency and mode of natural vibration of hard span were obtained by modal analysis.Secondly,through the field dynamic stress acquisition test,combined with the results of finite element analysis,the fault location is determined,and the vibration characteristics are analyzed.Finally,based on the results of modal analysis and vibration analysis,the method that the vibration of portal structure beam is affected by structural stiffness and vibration frequency amplitude is proposed.The torsional vibration of the portal structure beam was suppressed by increasing the stiffness of the beam and reducing the vibration conduction between the trolley and the beam,and the hard cross beam was optimized by strengthening the hanging column and the connecting beam and adding diagonal support between the pillar and the portal structure beam.By comparing the values of shear,bending moment,displacement and dynamic stress on the hard span before and after optimization,the amplitude peak after structural optimization is reduced by about 25%,and the application of oblique support and reinforcement of the beam can significantly improve the portal structure vibration.

Multi-Scale Design and Optimization of Composite Material Structure for Heavy-Duty Truck Protection Device

In this paper,to present a lightweight-developed front underrun protection device(FUPD)for heavy-duty trucks,plain weave carbon fiber reinforced plastic(CFRP)is used instead of the original high-strength steel.First,the mechanical and structural properties of plain carbon fiber composite anti-collision beams are comparatively analyzed from a multi-scale perspective.For studying the design capability of carbon fiber composite materials,we investigate the effects of TC-33 carbon fiber diameter(D),fiber yarn width(W)and height(H),and fiber yarn density(N)on the front underrun protective beam of carbon fiber compositematerials.Based on the investigation,a material-structure matching strategy suitable for the front underrun protective beam of heavy-duty trucks is proposed.Next,the composite material structure is optimized by applying size optimization and stack sequence optimization methods to obtain the higher performance carbon fiber composite front underrun protection beam of commercial vehicles.The results show that the fiber yarn height(H)has the greatest influence on the protective beam,and theH1matching scheme for the front underrun protective beamwith a carbon fiber composite structure exhibits superior performance.The proposed method achieves a weight reduction of 55.21% while still meeting regulatory requirements,which demonstrates its remarkable weight reduction effect.

A Full-Scale Optimization of a Crop Spatial Planting Structure and its Associated Effects

Driven by the concept of agricultural sustainable development,crop planting structure optimization(CPSO)has become an effective measure to reduce regional crop water demand,ensure food security,and protect the environment.However,traditional optimization of crop planting structures often ignores the impact on regional food supply–demand relations and interprovincial food trading.Therefore,using a system analysis concept and taking virtual water output as the connecting point,this study proposes a theoretical CPSO framework based on a multi-aspect and full-scale evaluation index system.To this end,a water footprint(WF)simulation module denoted as soil and water assessment tool–water footprint(SWAT-WF)is constructed to simulate the amount and components of regional crop WFs.A multi-objective spatial CPSO model with the objectives of maximizing the regional economic water productivity(EWP),minimizing the blue water dependency(BWFrate),and minimizing the grey water footprint(GWFgrey)is established to achieve an optimal planting layout.Considering various benefits,a fullscale evaluation index system based on region,province,and country scales is constructed.Through an entropy weight technique for order preference by similarity to an ideal solution(TOPSIS)comprehensive evaluation model,the optimal plan is selected from a variety of CPSO plans.The proposed framework is then verified through a case study of the upper–middle reaches of the Heihe River Basin in Gansu province,China.By combining the theory of virtual water trading with system analysis,the optimal planting structure is found.While sacrificing reasonable regional economic benefits,the optimization of the planting structure significantly improves the regional water resource benefits and ecological benefits at different scales.

Study on the Changes of Medical Income Structure in Governmentrun Hospitals of Traditional Chinese Medicine from 2012 to 2021

Objective To study the changing characteristics and trend of medical income structure in the government-run hospitals of traditional Chinese medicine(TCM),evaluate the effects of relevant reform measures,and to put forward corresponding suggestions for further optimizing their income structure.Methods The data related to the average medical income of government-run hospitals of TCM from 2012 to 2021 were sorted out.Then,descriptive analysis method was used to analyze the changes of related indicators.Besides,structural change method was applied to investigate the changes of outpatient income and inpatient income.Results and Conclusion From 2012 to 2021,the growth of medical income in government-run hospitals of TCM tended to be stable,and the proportion of medical service income increased from 22.62%(2012)to 29.38%(2021),but the average annual growth rate was only 0.68%.The main items that caused the change of outpatient income structure were medicine revenue,laboratory tests,diagnosis and treatment,and the cumulative contribution rate was 89.15%.The main items that caused the change of inpatient income structure were medicine revenue,sanitary materials,and auxiliary examinations income,with a cumulative contribution rate of 80.04%.However,the contribution rate of registration,diagnosis,treatment,surgery and nursing income reflecting the value of medical personnel’s technical labor was relatively small.The medical income structure of government-run hospitals of TCM underwent great changes and gradually became reasonable,but the medical service income increased slowly,and not all indicators achieved the expectations.To promote the sustainable development of public hospitals of TCM and enable them to provide high-quality and efficient TCM medical and health services,it is necessary to further improve the relevant policy mechanism.

Shape and Size Optimization of Truss Structures under Frequency Constraints Based on Hybrid Sine Cosine Firefly Algorithm

Shape and size optimization with frequency constraints is a highly nonlinear problem withmixed design variables,non-convex search space,and multiple local optima.Therefore,a hybrid sine cosine firefly algorithm(HSCFA)is proposed to acquire more accurate solutions with less finite element analysis.The full attraction model of firefly algorithm(FA)is analyzed,and the factors that affect its computational efficiency and accuracy are revealed.A modified FA with simplified attraction model and adaptive parameter of sine cosine algorithm(SCA)is proposed to reduce the computational complexity and enhance the convergence rate.Then,the population is classified,and different populations are updated by modified FA and SCA respectively.Besides,the random search strategy based on Lévy flight is adopted to update the stagnant or infeasible solutions to enhance the population diversity.Elitist selection technique is applied to save the promising solutions and further improve the convergence rate.Moreover,the adaptive penalty function is employed to deal with the constraints.Finally,the performance of HSCFA is demonstrated through the numerical examples with nonstructural masses and frequency constraints.The results show that HSCFA is an efficient and competitive tool for shape and size optimization problems with frequency constraints.

A Smooth Bidirectional Evolutionary Structural Optimization of Vibrational Structures for Natural Frequency and Dynamic Compliance

A smooth bidirectional evolutionary structural optimization(SBESO),as a bidirectional version of SESO is proposed to solve the topological optimization of vibrating continuum structures for natural frequencies and dynamic compliance under the transient load.A weighted function is introduced to regulate the mass and stiffness matrix of an element,which has the inefficient element gradually removed from the design domain as if it were undergoing damage.Aiming at maximizing the natural frequency of a structure,the frequency optimization formulation is proposed using the SBESO technique.The effects of various weight functions including constant,linear and sine functions on structural optimization are compared.With the equivalent static load(ESL)method,the dynamic stiffness optimization of a structure is formulated by the SBESO technique.Numerical examples show that compared with the classic BESO method,the SBESO method can efficiently suppress the excessive element deletion by adjusting the element deletion rate and weight function.It is also found that the proposed SBESO technique can obtain an efficient configuration and smooth boundary and demonstrate the advantages over the classic BESO technique.

A novel triple periodic minimal surface-like plate lattice and its data-driven optimization method for superior mechanical properties

Lattice structures can be designed to achieve unique mechanical properties and have attracted increasing attention for applications in high-end industrial equipment,along with the advances in additive manufacturing(AM)technologies.In this work,a novel design of plate lattice structures described by a parametric model is proposed to enrich the design space of plate lattice structures with high connectivity suitable for AM processes.The parametric model takes the basic unit of the triple periodic minimal surface(TPMS)lattice as a skeleton and adopts a set of generation parameters to determine the plate lattice structure with different topologies,which takes the advantages of both plate lattices for superior specific mechanical properties and TPMS lattices for high connectivity,and therefore is referred to as a TPMS-like plate lattice(TLPL).Furthermore,a data-driven shape optimization method is proposed to optimize the TLPL structure for maximum mechanical properties with or without the isotropic constraints.In this method,the genetic algorithm for the optimization is utilized for global search capability,and an artificial neural network(ANN)model for individual fitness estimation is integrated for high efficiency.A set of optimized TLPLs at different relative densities are experimentally validated by the selective laser melting(SLM)fabricated samples.It is confirmed that the optimized TLPLs could achieve elastic isotropy and have superior stiffness over other isotropic lattice structures.

Optimization of Rural Governance Structure under the Development of New Agricultural Management Entities

The positive impact of the development of new agricultural business entities and their institutional systems on the optimization of rural governance structures can be examined from various perspectives,including the state,market,rural society,urban-rural relations,and grassroots governance structure in rural communities.The development of these new agricultural business entities has not only redefined but also restructured the power distribution and governance patterns in rural developing countries,markets,and villages.The rural social order has evolved into a ternary mutual structure governance pattern,often referred to as the“state market rural”model.This transformation has prompted adjustments in the national economic and social policy structure and management systems at both macro and micro levels.It has led to the reshaping of power dynamics,benefit distribution,and governance structures in both urban and rural areas,resulting in significant changes to the economic and social fabric of rural regions.Furthermore,the grassroots governance structure in rural society,characterized by“township governance and village governance,”is undergoing continuous development and improvement.This transition is marked by a shift towards a collaborative governance structure that encourages diverse participation.Building upon the aforementioned optimizations,the rural governance structure now exhibits new characteristics.These include a more extensive and diverse range of rural governance mechanisms,increased openness in governance processes,and a heightened synergy among various governance mechanisms.This dynamic evolution reflects a richer,more diverse,and more open approach to rural governance,fostering a stronger collaborative effort in the pursuit of effective governance.

Embodied energy consumption and carbon emissions evaluation for urban industrial structure optimization

Cities are the main material processors asso- ciated with industrialization. The development of urban production based on fossil fuels is the major contributor to the rise of greenhouse gas density, and to global warming. The concept of urban industrial structure optimization is considered to be a solution to urban sustainable develop- ment and global climate issues. Enforcing energy con- servation and reducing carbon emissions are playing key roles in addressing these issues. As such, quantitative accounting and the evaluation of energy consumption and corresponding carbon emissions, which are by-products of urban production, are critical, in order to discover potential opportunities to save energy and to reduce emissions. Conventional evaluation indicators, such as ＂energy consumption per unit output value＂ and ＂emissions per unit output value＂, are concerned with immediate consumptions and emissions; while the indirect consump- tions and emissions that occur throughout the supply chain are ignored. This does not support the optimization of the overall urban industrial system. To present a systematic evaluation framework for cities, this study constructs new evaluation indicators, based on the concepts of ＂embodied energy＂ and ＂embodied carbon emissions＂, which take both the immediate and indirect effects of energy consumption and emissions into account. Taking Beijing as a case, conventional evaluation indicators are compared with the newly constructed ones. Results show that the energy consumption and emissions of urban industries are represented better by the new indicators than by conventional indicators, and provide useful information for urban industrial structure optimization.