Many types of buildings have been widely constructed in the vicinity of subway lines in China.Normal life and business activities are hampered by excessive subway-induced vibrations.This study aims to determine the in...Many types of buildings have been widely constructed in the vicinity of subway lines in China.Normal life and business activities are hampered by excessive subway-induced vibrations.This study aims to determine the influence of structure characteristics on structure-borne vibrations,generally based on experimental results.Vibration measurements were performed in four typical sites in Wuxi,China,involving over-track buildings,along-track buildings,frame structure buildings and a masonry building.Special structure designs like structure transfer floor were also included.Then,the captured data was analyzed in the time domain and the frequency domain.Furthermore,the influence of building location,structure type and structure layout was investigated.Finally,vibrations were evaluated with ISO and Chinese criteria and structure optimization for vibration attenuation was proposed.It is found that over-track buildings are more severely affected than along-track buildings.Higher frequency contents(20‒60 Hz)in over-track buildings and lower frequency contents(0‒10 Hz)in along-track buildings should be seriously considered in vibration control.Weaker structure member joints and lower material strength would be beneficial to over-track buildings while the inverse situation would be beneficial to along-track buildings.The application of structure transfer floor‒generally stiffer structure members and structure discontinuity‒is also beneficial.展开更多
The basin marginal fault system is the key to understand the formation and evolution of Songliao Basin.In order to investigate the influence of marginal fault system on the structural evolution of Songliao Basin,a com...The basin marginal fault system is the key to understand the formation and evolution of Songliao Basin.In order to investigate the influence of marginal fault system on the structural evolution of Songliao Basin,a comprehensive study was conducted on Shiling Town and Zhuanshanhu area of Yehe Town in Siping City of Jilin Province,where is the southeastern margin of the Songliao Basin and there are a series of well-exposed fault,fold and intrusive bodies belonging to the main marginal fault system of the Songliao Basin known as the Jiamusi-Yitong(Jia-Yi)fault zone.Through profile measurement and field investigation,samples with various lithologies and distinctive features were collected.Detailed field and laboratory works include component and microstructure analysis of these samples,rock-rock contact analysis,main strike measurement and statistics analysis.These data reveal the structural characteristics of the fold,fault and intrusive bodies in the study area.The research results show that the folds are distributed in the Mesozoic strata near the main fault of the eastern branch of the Jia-Yi fault zone,and the folded strata involve the Cretaceous Denglouku and Quantou formations.In addition,the section is dominated by high-angle strikeslip thrust faults.Light-colored veins and dark-colored veins are extensively distributed in the exposed granites.Statistical analysis of joint and fault attitudes in the study area reveals a right-lateral strike-sliping along the main fault.The large-scale right-lateral strike-slip and thrust fault system in Shiling Town occurred in right-lateral transpressive stage in Late Cretaceous.Based on the results above,tectonic evolution sequence in Shiling section of the Jia-Yi fault zone during the Mesozoic can be divided into five stages:Middle Jurassic left-lateral ductile strike-slip stage,Late Jurassic compression stage,Early Cretaceous tension stage,Early Cretaceous extension stage and Late Cretaceous right-lateral transpressive stage.These may have important constraint on understanding the Mesozoic evolution of the Songliao Basin.展开更多
In this paper, based on in-situ observational data of the Coordinated Enhanced Observing Period (CEOP) Asia-Australia Monsoon Project (CAMP) on the Tibetan'Plateau (CAMP-Tibet), structure of the Atmospheric Bou...In this paper, based on in-situ observational data of the Coordinated Enhanced Observing Period (CEOP) Asia-Australia Monsoon Project (CAMP) on the Tibetan'Plateau (CAMP-Tibet), structure of the Atmospheric Boundary Layer (ABL) was preliminarily studied during the dry and rainy seasons. The main results show: (a) Diurnal variation of the ABL is obvious over the northern Tibetan Plateau area. The height of the ABL is different with the season change, which ranges from 2,211 m to 4,430 m during the pre-monsoon season and from 1,006 m to 2,212 m during the monsoon season. The ABL height is higher during the dry period than during the rainyigeriod. (b) The humidity is lower during the dry period than during the rainy period, and there are reverse humidity during both periods. (c) Horizontal wind direction is mostly west during the dry period, east under the height of 2,500 m and west above the height of 2,500 m during the rainy period. The wind speed is low during both the rainy and dry periods in the lower ABL layer. The wind speed is stronger within the upper ABL during the dry period than dtn-ing the rainy period.展开更多
It is known that structural stiffness and strength distributions have an important role in the seismic response of buildings. The effect of using different code-specified lateral load patterns on the seismic performan...It is known that structural stiffness and strength distributions have an important role in the seismic response of buildings. The effect of using different code-specified lateral load patterns on the seismic performance of fixed-base buildings has been investigated by researchers during the past two decades. However, no investigation has yet been carried out for the case of soil-structure systems. In the present study, through intensive parametric analyses of 21,600 linear and nonlinear MDOF systems and considering five different shear strength and stiffness distribution patterns, including three code-specified patterns as well as uniform and concentric patterns subjected to a group of earthquakes recorded on alluvium and soft soils, the effect of structural characteristics distribution on the strength demand and ductility reduction factor of MDOF fixed-base and soil-structure systems are parametrically investigated. The results of this study show that depending on the level of inelasticity, soil flexibility and number of degrees-of-freedoms (DOFs), structural characteristics distribution can significantly affect the strength demand and ductility reduction factor of MDOF systems. It is also found that at high levels of inelasticity, the ductility reduction factor of low-rise MDOF soil-structure systems could be significantly less than that of fixed-base structures and the reduction is less pronounced as the number of stories increases.展开更多
It was proved that velocity-dependent infinitesima l symmetry transformations of nonholonomic systems have a characteristic functio nal structure, which could be formulated by means of an auxiliary symmetry tra nsform...It was proved that velocity-dependent infinitesima l symmetry transformations of nonholonomic systems have a characteristic functio nal structure, which could be formulated by means of an auxiliary symmetry tra nsformation function and is manifestly dependent upon constants of motion of th e system. An example was given to illustrate the applicability of the results.展开更多
The linear dispersion relation of a trapezoidally corrugated slow wave structure (TCSWS) is analyzed and presented. The size parameters of the TCSWS are chosen in such a way that they operate in the x-band frequency...The linear dispersion relation of a trapezoidally corrugated slow wave structure (TCSWS) is analyzed and presented. The size parameters of the TCSWS are chosen in such a way that they operate in the x-band frequency range. The dispersion relation is solved by utilizing the Rayleigh-Fourier method by expressing the radial function in terms of the Fourier series. A highly accurate synthetic technique is also applied to determine the complete dispersion characteristics from experimentally measured resonances (cold test). Periodic structures resonate at specific frequencies when the terminals are shorted numerical calculation, synthetic technique and cold appropriately. The dispersion characteristics obtained from test are compared, and an excellent agreement is achieved.展开更多
Three pectin fractions(water-soluble fraction(WSF),chelator-soluble fraction(CSF),and sodium carbonatesoluble fraction(NSF))were obtained from Chinese dwarf cherry(Cerasus humilis)fruits.All of them were branched low ...Three pectin fractions(water-soluble fraction(WSF),chelator-soluble fraction(CSF),and sodium carbonatesoluble fraction(NSF))were obtained from Chinese dwarf cherry(Cerasus humilis)fruits.All of them were branched low methoxylated pectins with an amorphous or partially nanocrystalline nature and eight neutral monosaccharides(arabinose and galactose were most abundant).WSF,CSF and NSF had a degree of methylation(DM)of 35.82%,14.85%and 7.13%,uronic acid(UA)content of 76.02%,83.71%and 69.01%,and total protein content of 2.4%,2.1%and 8.8%,respectively.Their molecular weights were 340.31,330.16 and 141.31 kg/mol,respectively(analyzed by gel permeation chromatography(GPC)).WSF,CSF and NSF exhibited good rheological,thermal,emulsifying,emulsion-stabilizing,water-adsorbing,oil-binding,cholesterol-binding and antioxidant properties.NSF had the highest emulsifying,emulsion stabilizing,water-/oil-/cholesterol-binding and antioxidant capacities,followed by CSF.NSF had the highest viscosity(406.77 m Pa·s),flowability,and resistance to heat-induced changes/damage,which may be related to its lowest polydispersity index,DM and UA content and highest protein content.The three pectin fractions with desirable characteristics can be used as food additives/ingredients and dietary supplements.展开更多
BACKGROUND In patients with schizophrenia,the brain structure and neurotransmitter levels change,which may be related to the occurrence and progression of this disease.AIM To explore the relationships between changes ...BACKGROUND In patients with schizophrenia,the brain structure and neurotransmitter levels change,which may be related to the occurrence and progression of this disease.AIM To explore the relationships between changes in neurotransmitters,brain structural characteristics,and the scores of the Positive and Negative Symptom Scale(PANSS)in patients with first-episode schizophrenia.METHODS The case group comprised 97 patients with schizophrenia,who were evaluated using the Canadian Neurological Scale and confirmed by laboratory tests at Ningbo Mental Hospital from January 2020 to July 2022.The control group comprised 100 healthy participants.For all participants,brain structural characteristics were explored by measuring brain dopamine(DA),glutamic acid(Glu),and gamma-aminobutyric acid(GABA)levels,with magnetic resonance imaging.The case group was divided into negative and positive symptom subgroups using PANSS scores for hierarchical analysis.Linear correlation analysis was used to analyze the correlations between neurotransmitters,brain structural character istics,and PANSS scores.RESULTS Patients in the case group had higher levels of DA and lower levels of Glu and GABA,greater vertical and horizontal distances between the corpus callosum and the inferior part of the fornix and larger ventricle area than patients in the control group(P<0.05).Patients with positive schizophrenia symptoms had significantly higher levels of DA,Glu,and GABA than those with negative symptoms(P<0.05).In patients with positive schizophrenia symptoms,PANSS score was significantly positively correlated with DA,vertical and horizontal distances between the corpus callosum and the infrafornix,and ventricular area,and was significantly negatively correlated with Glu and GABA(P<0.05).In patients with negative schizophrenia symptoms,PANSS score was significantly positively correlated with DA,vertical distance between the corpus callosum and the infrafornix,horizontal distance between the corpus callosum and the infrafornix,and ventricular area,and was significantly negatively correlated with Glu and GABA(P<0.05).CONCLUSION In patients with first-episode schizophrenia,DA levels increased,Glu and GABA levels decreased,the thickness of the corpus callosum increased,and these variables were correlated with PANSS scores.展开更多
Au/n-Si (MS) structures with a high dielectric interlayer (0.03 graphene-doped PVA) are fabricated to investigate the illumination and voltage effects on electrical and dielectric properties by using capacitance-v...Au/n-Si (MS) structures with a high dielectric interlayer (0.03 graphene-doped PVA) are fabricated to investigate the illumination and voltage effects on electrical and dielectric properties by using capacitance-voltage (C-V) and conductance-voltage (G/w-V) measurements at room temperature and at 1 MHz. Some of the main electrical parameters such as concentration of doping atoms (ND), barrier height ( ФB( C - V) ), depletion layer width (WD) and series resistance (Rs) show fairly large illumination dispersion. The voltage-dependent profile of surface states (Nss) and resistance of the structure (Ri ) are also obtained by using the dark-illumination capacitance (Cdark- Cm) and Nicollian-Brews methods, respectively, For a clear observation of changes in electrical parameters with illumination, the values of ND, WD, ФB(O- V) and Rs are drawn as a function of illumination intensity. The values of ND and WD change almost linearly with illumination intensity. On the other hand, Rs decreases almost exponentially with increasing illumination intensity whereas ФB(C - V) increases. The experimental results suggest that the use of a high dielectric interlayer (0.03 graphene-doped PVA) considerably passivates or reduces the magnitude of the surface states. The large change or dispersion in main electrical parameters can be attributed to generation of electron-hole pairs in the junction under illumination and to a good light absorption. All of these experimental results confirm that the fabricated Au/0.03 graphene-doped PVA/n-Si structure can be used as a photodiode or a capacitor in optoelectronic applications.展开更多
To gain insight into the flow mechanisms and stress sensitivity for fractured-vuggy reservoirs,several core models with different structural characteristics were designed and fabricated to investigate the impact of ef...To gain insight into the flow mechanisms and stress sensitivity for fractured-vuggy reservoirs,several core models with different structural characteristics were designed and fabricated to investigate the impact of effective stress on permeability for carbonate fractured-vuggy rocks(CFVR).It shows that the permeability performance curves under different pore and confining pressures(i.e.altered stress conditions)for the fractured core models and the vuggy core models have similar change patterns.The ranges of permeability variation are significantly wider at high pore pressures,indicating that permeability reduction is the most significant during the early stage of development for fractured-vuggy reservoirs.Since each obtained effective stress coefficient for permeability(ESCP)varies with the changes in confining pressure and pore pressure,the effective stresses for permeability of four representative CFVR show obvious nonlinear characteristics,and the variation ranges of ESCP are all between 0 and 1.Meanwhile,a comprehensive ESCP mathematical model considering triple media,including matrix pores,fractures,and dissolved vugs,was proposed.It is proved theoretically that the ESCP of CFVR generally varies between 0 and 1.Additionally,the regression results showed that the power model ranked highest among the four empirical models mainly applied in stress sensitivity characterization,followed by the logarithmic model,exponential model,and binomial model.The concept of“permeability decline rate”was introduced to better evaluate the stress sensitivity performance for CFVR,in which the one-fracture rock is the strongest,followed by the fracture-vug rock and two-horizontalfracture rock;the through-hole rock is the weakest.In general,this study provides a theoretical basis to guide the design of development and adjustment programs for carbonate fractured-vuggy reservoirs.展开更多
The magnetotelluric (MT) survey along the Zhada (札达)-Quanshui (泉水) Lake profile on the western margin of the Qinghai (青海)-Tibet plateau shows that the study area is divided into three tectonic provinces ...The magnetotelluric (MT) survey along the Zhada (札达)-Quanshui (泉水) Lake profile on the western margin of the Qinghai (青海)-Tibet plateau shows that the study area is divided into three tectonic provinces by the Yalung Tsangpo and Bangong (班公)-Nujiang (怒江) sutures. From south to north these are the Himalayan terrane, Gangdise terrane, and Qiangtang (羌塘) terrane. For the study area, there are widespread high-conductivity layers in the mid and lower crust, the top layers of which fluctuate intensively. The high-conductivity layer within the Gangdise terrane is deeper than those within the Qiangtang terrane and the Himalaya terrane, and the deepest high-conductivity layer is to the south of the Bangong-Nujiang suture. The top surface of the high-conductivity layer in the south of the Bangong-Nujiang suture is about 20 km lower than that in the north of it. The high-conductivity layer within the Gangdise terrane dips toward north and there are two high-conductivity layers within the crust of the southern Qiangtang terrane. In the upper crust along the profile, there are groups of lateral electrical gradient zones or distortion zones of different scales and occurrence indicating the distribution of faults and sutures along the profile. According to the electrical structure, the structural characteristics and space distribution of the Yalung Tsangpo suture, Bangong.Nujiang suture, and the major faults of Longmucuo (龙木错) and Geerzangbu are inferred.展开更多
Based on 2D and 3D seismic data,the latest drilling data and field outcrop data of the northern slope of the Central Sichuan paleo-uplift,the structural analysis method is used to analyze unconformity development char...Based on 2D and 3D seismic data,the latest drilling data and field outcrop data of the northern slope of the Central Sichuan paleo-uplift,the structural analysis method is used to analyze unconformity development characteristics and fault characteristics during the key structural transformation period,discussing the influence of the structural characteristics on the hydrocarbon accumulation of deep carbonate rocks.The results show that:(1)The two key unconformities of the Tongwan and Caledonian periods were primarily developed in deep carbonate rocks.Firstly,Tongwan’s unconformities are characterized by regional disconformities between the second and third members of the Dengying Formation,the top formation of the Sinian and the lower Cambrian,strips of which zigzag through the north and south sides of the study area.Secondly,the Caledonian unconformity is characterized by a regional unconformable contact between the lower Permian and the ower Paleozoic strata.From NE to SW,the age of the strata,which were subject to erosion,changes from new to old,the denudation distribution showing as a nose-shaped structure which inclines towards the ENE.(2)Boundary fault and transtensional strike-slip faults developed in the Sinian to Paleozoic strata.In profile,there are three types of structural styles:steep and erect,flower structures,’Y’and reversed’Y’type faults.In plane view,the Sinian developed extensional boundary faults extending in an almost NS direction,strike-slip faults developing and extending linearly in approximately EW,WNW and NE strikes in the Cambrian,with characteristically more in the south and less in the north.(3)The faults in the northern slope show obvious zonal deformations in transverse view as well as significant stages and stratified activity in a longitudinal direction.Among them,the activity of faults in the Sinian was the strongest,followed by the activity in the Cambrian period,the activity intensity of faults in the Permian period being the weakest.This fault activity can be divided into four periods:Sinian,Cambrian-Permian,the early Indosinian period and the late Indosinian-Himalayan period,the transtensional strikeslip faults being the products of oblique extensions of pre-existing weak zones in the Xingkai and Emei taphrogenesis,with a particular inheritance in the main faults.(4)Combined with hydrocarbon accumulation factors,it is considered that the epigenetic karstification of the Tongwan and Caledonian unconformities in the northern slope controlled the formation and distribution of carbonate karst reservoirs over a large area,also acting as a good pathway for oil and gas migration.The extensional faults developed at the margin of the NS trending rift,controlling the sag-platform sedimentary pattern in the Dengying Formation of the Sinian.Strike-slip faults in NE,WNW and ENE directions may control the microgeomorphological pattern inside the platform and intensify the differential distribution of grain beach facies.The multi-stage hereditary activity of strike-slip faults not only improved the porosity and permeability of the reservoirs,but also acted as the main channel of oil and gas migration,providing favorable conditions for the development of the current multi-layer gasbearing scenario in the northern slope of the Central Sichuan Basin.展开更多
To improve the adaptability of TBMs in diverse geological environments,this paper proposes a reconfigurable Type-V thrust mechanism(V-TM)with rearrangeable working states,in which structural stiffness can be automatic...To improve the adaptability of TBMs in diverse geological environments,this paper proposes a reconfigurable Type-V thrust mechanism(V-TM)with rearrangeable working states,in which structural stiffness can be automatically altered during operation.Therefore,millions of configurations can be obtained,and thousands of instances of working status per configuration can be set respectively.Nonetheless,the complexity of configurations and diversity of working states contributes to further complications for the structural stiffness algorithm.This results in challenges such as difficulty calculating the payload compliance index and the environment adaptability index.To solve this problem,we use the configuration matrix to describe the relationship between propelling jacks under reconfiguration and adopt pattern vectors to describe the working state of each hydraulic cylinder.Then,both the dynamic compatible equation between propeller forces of the hydraulic cylinders and driving forces,and the kinematic harmonizing equation between the hydraulic cylinder displacements and their deformations are established.Next,we derive the stiffness analytical equation using Hooke’s law and the Jacobian Matrix.The proposed approach provides an effective algorithm to support structural rigidity analysis,and lays a solid theoretical foundation for calculating the performance indexes of the V-TM.We then analyze the rigidity characteristics of typical configurations under different working states,and obtain the main factors affecting structural stiffness of the V-TM.The results show the deviation degree of structural parameters in hydraulic cylinders within the same group,and the working status of propelling jacks.Finally,our constructive conclusions contribute valuable information for matching and optimization by drawing on the factors that affect the structural rigidity of the V-TM.展开更多
Two-dimensional disordered granular assemblies composed of 2048 polydispersed frictionless disks are simulated using the discrete element method. The height of the first peak of the pair correlation function, gl, the ...Two-dimensional disordered granular assemblies composed of 2048 polydispersed frictionless disks are simulated using the discrete element method. The height of the first peak of the pair correlation function, gl, the local and global bond orientational parameters ψ6^1 and ψ6^g, and the fluctuations of these parameters decrease with increasing polydispersity s, implying the transition from a polycrystalline state to an amorphous state in the system. As s increases, the peak position of the boson peak aJBp shifts towards a lower frequency and the intensity of the boson peak D(ωBP)/ωBp increases, indicating that the position and the strength of the boson peak are controlled by the polydispersity of the system. Moreover, the inverse of the boson peak intensity ωBP/D(ωBP), the shear modulus G, and the basin curvature SIS all have a similar dependence on s, implying that the s dependence of the vibrational density of states at low frequencies likely originates from the s dependence of the basin curvature.展开更多
Using the NCEP 1°×1°reanalysis data,several obvious differences of the structural characteristics of developed versus undeveloped mid-level vortexes are studied.First,the central vorticity of the develo...Using the NCEP 1°×1°reanalysis data,several obvious differences of the structural characteristics of developed versus undeveloped mid-level vortexes are studied.First,the central vorticity of the developed mid-level vortex increases towards higher levels while the undeveloped one decreases.The low-level convergence structure maintains well in the developed mid-level vortex whereas the undeveloped one does badly.Second,on the one hand,according to the symmetric analysis,the horizontal wind field and wind vertical section of the developed mid-level vortex are well symmetric while those of the undeveloped one are less symmetric.Meanwhile,weak wind vertical shear help the developed mid-level vortex to establish a warm core in upper-and mid-levels of the troposphere.On the other hand,according to the balance analysis,better balance between wind and pressure is shown in the mid-and lower-levels of the troposphere of the developed mid-level vortex than in those of the undeveloped vortex.Third,positive anomaly of potential vorticity is enhanced and developed in the vertical direction of the developed vortex.However,the undeveloped vortex weakens with a weak positive anomaly.展开更多
Structural characteristics, chemical bonds and thermoelectric properties of Al-doped boron carbides are studied through calculations of various structural unit models by using a self-consistent-field discrete variatio...Structural characteristics, chemical bonds and thermoelectric properties of Al-doped boron carbides are studied through calculations of various structural unit models by using a self-consistent-field discrete variation X. method. The calculations show that Al atom doped in boron carbide is in preference to substituting B or C atoms on the end of boron carbide chain, and then may occupy interstitial sites, but it is difficult for Al to substitute B or C atom in the centers of the chain or in the icosahedra. A representative structural unit containing an Al atom is [C - B -Al]-[B11C]-,while the structural unit without Al is [C-B-B(C)]- - [B11C]C+, and the coexistence of these two different structural units makes the electrical conductivity increased. As the covalent bond of Al-B or Al-C is weaker than that of B-B or B-C, the thermal conductivity decreases when Al is added into boron carbides. With the electrical conductivity increasing and the thermal conductivity decreases, Al doping has significant effect on thermoelectric properties of baron carbides.展开更多
The Suoluogou gold deposit in Muli County of Sichuan Province is located in the southern section of the Ganzi- Litang suture zone (Figs. la, b), which is the largest gold deposit discovered in this suture zone in re...The Suoluogou gold deposit in Muli County of Sichuan Province is located in the southern section of the Ganzi- Litang suture zone (Figs. la, b), which is the largest gold deposit discovered in this suture zone in recent years. At present, the exploration of the Suoluogou gold deposit is still in progress, and the amount of resource is increasing.展开更多
Semen coicis resistant starch is a type of starch which has undergone retrogradation. In this study,the structural characteristics of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Seme...Semen coicis resistant starch is a type of starch which has undergone retrogradation. In this study,the structural characteristics of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Semen coicis resistant starch were investigated. The field emission scanning electron microscopy results indicated that compared to Semen coicis native starch and high-amylose maize starch,the surface of heat-moisture treated Semen coicis resistant starch was rough and full of irregular layered strips. The Fourier transform infrared spectroscopy measurements indicated the degree of ordered structure values of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Semen coicis resistant starch are 1.355,1.372,and 1.410,respectively,and the degree of double helix values is 1.931,1.942,and 2.027,respectively,indicating that the degree of ordered structure and double helix structure of heat-moisture treated Semen coicis resistant starch is both higher than those of Semen coicis native starch and high-amylose maize starch. ^(13) C nuclear magnetic resonance spectroscopy showed that Semen coicis native starch and high-amylose maize starch exhibited A-type crystal structures,while heat-moisture treated Semen coicis resistant starch displayed B-type crystal structures. The relative crystallinity of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Semen coicis resistant starch is 76.41,85.36,and 87.25,respectively,and the percentages of amorphous region are 5.78,4.72,and 4.39,respectively. Additionally,heat-moisture treated Semen coicis resistant starch could increase the proliferation of Bifidobacterium bifidum more than Semen coicis native starch or high-amylose maize starch. Bifidobacterium bifidum displayed a higher tolerance under simulated gastrointestinal tract conditions such as low p H,bile acid,pepsin,and trypsin in heat-moisture treated Semen coicis resistant starch medium than in Semen coicis native starch or high-amylose maize starch media.展开更多
Emergency road networks(ERNs),an important part of local disaster prevention systems,can provide security to residents and their property.Exploring the ERNs structure is of great significance in terms of promoting dis...Emergency road networks(ERNs),an important part of local disaster prevention systems,can provide security to residents and their property.Exploring the ERNs structure is of great significance in terms of promoting disaster prevention and establishing road safety in dangerous mountainous areas.This study considered the ERNs of the Kangding section of the Dadu River Basin as the area for a case study.Complex Network Analysis was used to examine the relationship between the four characteristic indicators of mountain roads and the degree of earthquake impacts under the Lushan,Wenchuan,and Kangding Earthquake scenarios.Based on the analysis results,the southwest mountain road network was evaluated;then,computer simulations were used to evaluate the structural changes in the road network after index changes.The network was optimized,and the corresponding emergency avoidance network was proposed to provide a reference for the establishment of the mountainous ERN.The results show that the overall completeness of the mountainous ERNs in Southwest China is poor and prone to traffic accidents.Moreover,the local stability is poor,and the network is susceptible to natural hazards.The overall structure of the road network is balanced,but that of certain road sections is not.Road sections with different attributes present a“gathering-scattering”spatial distribution,i.e,some sections are clustered together while others are far apart.Accordingly,a planning optimization strategy is proposed to better understand the complexity and systematic nature of the mountainous ERN as a whole and to provide a reference for disaster prevention and mitigation planning in mountainous regions in Southwest China.展开更多
MgNi-based hydrogen storage alloys Mg1–xTixNi (x = 0, 0.1, 0.2, and 0.3) were prepared by means of mechanical alloying. Mg in the alloy was partially substituted by Ti to improve the cycle stability of the alloys. ...MgNi-based hydrogen storage alloys Mg1–xTixNi (x = 0, 0.1, 0.2, and 0.3) were prepared by means of mechanical alloying. Mg in the alloy was partially substituted by Ti to improve the cycle stability of the alloys. The effects of the substitution of Ti for Mg on the microstructure and electrochemical performances of the alloys were investigated in detail. The results indicate that the substitution of Ti for Mg obviously decreases the discharge capacity, but it significantly improves their cycle stabilities. The microstructure of the alloys analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM) shows that the alloys have a dominatingly amorphous structure. The substitution of Ti for Mg helps to improve the anti-oxidation/corrosion ability of the MgNi alloy but demolishes the electrochemical kinetics of hydrogenation/dehydrogenation. The Mg0.9Ti0.1Ni alloy electrode milled for 80 h exhibits the best integrative capability, which has the maximal discharge capacity of 331.66 mAh/g and the C30/Cmax of 63.65%.展开更多
基金National Basic Research Program of China(973 Program)under Grant No.2014CB049101。
文摘Many types of buildings have been widely constructed in the vicinity of subway lines in China.Normal life and business activities are hampered by excessive subway-induced vibrations.This study aims to determine the influence of structure characteristics on structure-borne vibrations,generally based on experimental results.Vibration measurements were performed in four typical sites in Wuxi,China,involving over-track buildings,along-track buildings,frame structure buildings and a masonry building.Special structure designs like structure transfer floor were also included.Then,the captured data was analyzed in the time domain and the frequency domain.Furthermore,the influence of building location,structure type and structure layout was investigated.Finally,vibrations were evaluated with ISO and Chinese criteria and structure optimization for vibration attenuation was proposed.It is found that over-track buildings are more severely affected than along-track buildings.Higher frequency contents(20‒60 Hz)in over-track buildings and lower frequency contents(0‒10 Hz)in along-track buildings should be seriously considered in vibration control.Weaker structure member joints and lower material strength would be beneficial to over-track buildings while the inverse situation would be beneficial to along-track buildings.The application of structure transfer floor‒generally stiffer structure members and structure discontinuity‒is also beneficial.
基金Supported by the Key Research and Development Program of Heilongjiang Province(No.JD22A022)the Natural Science Foundation of Heilongjiang Province of China(Nos.LH2022D013,LH2023D005)the Support Project for Young Talents in Local Universities in Heilongjiang Province(No.14011202101).
文摘The basin marginal fault system is the key to understand the formation and evolution of Songliao Basin.In order to investigate the influence of marginal fault system on the structural evolution of Songliao Basin,a comprehensive study was conducted on Shiling Town and Zhuanshanhu area of Yehe Town in Siping City of Jilin Province,where is the southeastern margin of the Songliao Basin and there are a series of well-exposed fault,fold and intrusive bodies belonging to the main marginal fault system of the Songliao Basin known as the Jiamusi-Yitong(Jia-Yi)fault zone.Through profile measurement and field investigation,samples with various lithologies and distinctive features were collected.Detailed field and laboratory works include component and microstructure analysis of these samples,rock-rock contact analysis,main strike measurement and statistics analysis.These data reveal the structural characteristics of the fold,fault and intrusive bodies in the study area.The research results show that the folds are distributed in the Mesozoic strata near the main fault of the eastern branch of the Jia-Yi fault zone,and the folded strata involve the Cretaceous Denglouku and Quantou formations.In addition,the section is dominated by high-angle strikeslip thrust faults.Light-colored veins and dark-colored veins are extensively distributed in the exposed granites.Statistical analysis of joint and fault attitudes in the study area reveals a right-lateral strike-sliping along the main fault.The large-scale right-lateral strike-slip and thrust fault system in Shiling Town occurred in right-lateral transpressive stage in Late Cretaceous.Based on the results above,tectonic evolution sequence in Shiling section of the Jia-Yi fault zone during the Mesozoic can be divided into five stages:Middle Jurassic left-lateral ductile strike-slip stage,Late Jurassic compression stage,Early Cretaceous tension stage,Early Cretaceous extension stage and Late Cretaceous right-lateral transpressive stage.These may have important constraint on understanding the Mesozoic evolution of the Songliao Basin.
基金under the auspices of the Chinese National Key Programme for Developing Basic Sciences (2010CB951703)the Chinese National Key Programme for Developing Basic Sciences (2005CB422003)the National Natural Science Foundation of China (41175008, 40810059006 and 40675012)
文摘In this paper, based on in-situ observational data of the Coordinated Enhanced Observing Period (CEOP) Asia-Australia Monsoon Project (CAMP) on the Tibetan'Plateau (CAMP-Tibet), structure of the Atmospheric Boundary Layer (ABL) was preliminarily studied during the dry and rainy seasons. The main results show: (a) Diurnal variation of the ABL is obvious over the northern Tibetan Plateau area. The height of the ABL is different with the season change, which ranges from 2,211 m to 4,430 m during the pre-monsoon season and from 1,006 m to 2,212 m during the monsoon season. The ABL height is higher during the dry period than during the rainyigeriod. (b) The humidity is lower during the dry period than during the rainy period, and there are reverse humidity during both periods. (c) Horizontal wind direction is mostly west during the dry period, east under the height of 2,500 m and west above the height of 2,500 m during the rainy period. The wind speed is low during both the rainy and dry periods in the lower ABL layer. The wind speed is stronger within the upper ABL during the dry period than dtn-ing the rainy period.
文摘It is known that structural stiffness and strength distributions have an important role in the seismic response of buildings. The effect of using different code-specified lateral load patterns on the seismic performance of fixed-base buildings has been investigated by researchers during the past two decades. However, no investigation has yet been carried out for the case of soil-structure systems. In the present study, through intensive parametric analyses of 21,600 linear and nonlinear MDOF systems and considering five different shear strength and stiffness distribution patterns, including three code-specified patterns as well as uniform and concentric patterns subjected to a group of earthquakes recorded on alluvium and soft soils, the effect of structural characteristics distribution on the strength demand and ductility reduction factor of MDOF fixed-base and soil-structure systems are parametrically investigated. The results of this study show that depending on the level of inelasticity, soil flexibility and number of degrees-of-freedoms (DOFs), structural characteristics distribution can significantly affect the strength demand and ductility reduction factor of MDOF systems. It is also found that at high levels of inelasticity, the ductility reduction factor of low-rise MDOF soil-structure systems could be significantly less than that of fixed-base structures and the reduction is less pronounced as the number of stories increases.
文摘It was proved that velocity-dependent infinitesima l symmetry transformations of nonholonomic systems have a characteristic functio nal structure, which could be formulated by means of an auxiliary symmetry tra nsformation function and is manifestly dependent upon constants of motion of th e system. An example was given to illustrate the applicability of the results.
文摘The linear dispersion relation of a trapezoidally corrugated slow wave structure (TCSWS) is analyzed and presented. The size parameters of the TCSWS are chosen in such a way that they operate in the x-band frequency range. The dispersion relation is solved by utilizing the Rayleigh-Fourier method by expressing the radial function in terms of the Fourier series. A highly accurate synthetic technique is also applied to determine the complete dispersion characteristics from experimentally measured resonances (cold test). Periodic structures resonate at specific frequencies when the terminals are shorted numerical calculation, synthetic technique and cold appropriately. The dispersion characteristics obtained from test are compared, and an excellent agreement is achieved.
文摘Three pectin fractions(water-soluble fraction(WSF),chelator-soluble fraction(CSF),and sodium carbonatesoluble fraction(NSF))were obtained from Chinese dwarf cherry(Cerasus humilis)fruits.All of them were branched low methoxylated pectins with an amorphous or partially nanocrystalline nature and eight neutral monosaccharides(arabinose and galactose were most abundant).WSF,CSF and NSF had a degree of methylation(DM)of 35.82%,14.85%and 7.13%,uronic acid(UA)content of 76.02%,83.71%and 69.01%,and total protein content of 2.4%,2.1%and 8.8%,respectively.Their molecular weights were 340.31,330.16 and 141.31 kg/mol,respectively(analyzed by gel permeation chromatography(GPC)).WSF,CSF and NSF exhibited good rheological,thermal,emulsifying,emulsion-stabilizing,water-adsorbing,oil-binding,cholesterol-binding and antioxidant properties.NSF had the highest emulsifying,emulsion stabilizing,water-/oil-/cholesterol-binding and antioxidant capacities,followed by CSF.NSF had the highest viscosity(406.77 m Pa·s),flowability,and resistance to heat-induced changes/damage,which may be related to its lowest polydispersity index,DM and UA content and highest protein content.The three pectin fractions with desirable characteristics can be used as food additives/ingredients and dietary supplements.
文摘BACKGROUND In patients with schizophrenia,the brain structure and neurotransmitter levels change,which may be related to the occurrence and progression of this disease.AIM To explore the relationships between changes in neurotransmitters,brain structural characteristics,and the scores of the Positive and Negative Symptom Scale(PANSS)in patients with first-episode schizophrenia.METHODS The case group comprised 97 patients with schizophrenia,who were evaluated using the Canadian Neurological Scale and confirmed by laboratory tests at Ningbo Mental Hospital from January 2020 to July 2022.The control group comprised 100 healthy participants.For all participants,brain structural characteristics were explored by measuring brain dopamine(DA),glutamic acid(Glu),and gamma-aminobutyric acid(GABA)levels,with magnetic resonance imaging.The case group was divided into negative and positive symptom subgroups using PANSS scores for hierarchical analysis.Linear correlation analysis was used to analyze the correlations between neurotransmitters,brain structural character istics,and PANSS scores.RESULTS Patients in the case group had higher levels of DA and lower levels of Glu and GABA,greater vertical and horizontal distances between the corpus callosum and the inferior part of the fornix and larger ventricle area than patients in the control group(P<0.05).Patients with positive schizophrenia symptoms had significantly higher levels of DA,Glu,and GABA than those with negative symptoms(P<0.05).In patients with positive schizophrenia symptoms,PANSS score was significantly positively correlated with DA,vertical and horizontal distances between the corpus callosum and the infrafornix,and ventricular area,and was significantly negatively correlated with Glu and GABA(P<0.05).In patients with negative schizophrenia symptoms,PANSS score was significantly positively correlated with DA,vertical distance between the corpus callosum and the infrafornix,horizontal distance between the corpus callosum and the infrafornix,and ventricular area,and was significantly negatively correlated with Glu and GABA(P<0.05).CONCLUSION In patients with first-episode schizophrenia,DA levels increased,Glu and GABA levels decreased,the thickness of the corpus callosum increased,and these variables were correlated with PANSS scores.
文摘Au/n-Si (MS) structures with a high dielectric interlayer (0.03 graphene-doped PVA) are fabricated to investigate the illumination and voltage effects on electrical and dielectric properties by using capacitance-voltage (C-V) and conductance-voltage (G/w-V) measurements at room temperature and at 1 MHz. Some of the main electrical parameters such as concentration of doping atoms (ND), barrier height ( ФB( C - V) ), depletion layer width (WD) and series resistance (Rs) show fairly large illumination dispersion. The voltage-dependent profile of surface states (Nss) and resistance of the structure (Ri ) are also obtained by using the dark-illumination capacitance (Cdark- Cm) and Nicollian-Brews methods, respectively, For a clear observation of changes in electrical parameters with illumination, the values of ND, WD, ФB(O- V) and Rs are drawn as a function of illumination intensity. The values of ND and WD change almost linearly with illumination intensity. On the other hand, Rs decreases almost exponentially with increasing illumination intensity whereas ФB(C - V) increases. The experimental results suggest that the use of a high dielectric interlayer (0.03 graphene-doped PVA) considerably passivates or reduces the magnitude of the surface states. The large change or dispersion in main electrical parameters can be attributed to generation of electron-hole pairs in the junction under illumination and to a good light absorption. All of these experimental results confirm that the fabricated Au/0.03 graphene-doped PVA/n-Si structure can be used as a photodiode or a capacitor in optoelectronic applications.
基金This work was supported by the Joint Fund of NSFC for Enterprise Innovation and Development(Grant No.U19B6003-02-06)the National Natural Science Foundation of China(Grant No.51974331)+1 种基金the Natural Science Foundation of Jiangsu Province(Grant No.BK20200525)The authors would like to sincerely acknowledge these funding programs for their financial support.Particularly,the support provided by the China Scholarship Council(CSC)during a visit of Ke Sun(File No.202106440065)to the University of Alberta is also sincerely acknowledged.
文摘To gain insight into the flow mechanisms and stress sensitivity for fractured-vuggy reservoirs,several core models with different structural characteristics were designed and fabricated to investigate the impact of effective stress on permeability for carbonate fractured-vuggy rocks(CFVR).It shows that the permeability performance curves under different pore and confining pressures(i.e.altered stress conditions)for the fractured core models and the vuggy core models have similar change patterns.The ranges of permeability variation are significantly wider at high pore pressures,indicating that permeability reduction is the most significant during the early stage of development for fractured-vuggy reservoirs.Since each obtained effective stress coefficient for permeability(ESCP)varies with the changes in confining pressure and pore pressure,the effective stresses for permeability of four representative CFVR show obvious nonlinear characteristics,and the variation ranges of ESCP are all between 0 and 1.Meanwhile,a comprehensive ESCP mathematical model considering triple media,including matrix pores,fractures,and dissolved vugs,was proposed.It is proved theoretically that the ESCP of CFVR generally varies between 0 and 1.Additionally,the regression results showed that the power model ranked highest among the four empirical models mainly applied in stress sensitivity characterization,followed by the logarithmic model,exponential model,and binomial model.The concept of“permeability decline rate”was introduced to better evaluate the stress sensitivity performance for CFVR,in which the one-fracture rock is the strongest,followed by the fracture-vug rock and two-horizontalfracture rock;the through-hole rock is the weakest.In general,this study provides a theoretical basis to guide the design of development and adjustment programs for carbonate fractured-vuggy reservoirs.
基金This paper is supported by the National Natural Science Foundation of China (No. 40404006)the Focused Subject Program of Beijing (No. XK104910598).
文摘The magnetotelluric (MT) survey along the Zhada (札达)-Quanshui (泉水) Lake profile on the western margin of the Qinghai (青海)-Tibet plateau shows that the study area is divided into three tectonic provinces by the Yalung Tsangpo and Bangong (班公)-Nujiang (怒江) sutures. From south to north these are the Himalayan terrane, Gangdise terrane, and Qiangtang (羌塘) terrane. For the study area, there are widespread high-conductivity layers in the mid and lower crust, the top layers of which fluctuate intensively. The high-conductivity layer within the Gangdise terrane is deeper than those within the Qiangtang terrane and the Himalaya terrane, and the deepest high-conductivity layer is to the south of the Bangong-Nujiang suture. The top surface of the high-conductivity layer in the south of the Bangong-Nujiang suture is about 20 km lower than that in the north of it. The high-conductivity layer within the Gangdise terrane dips toward north and there are two high-conductivity layers within the crust of the southern Qiangtang terrane. In the upper crust along the profile, there are groups of lateral electrical gradient zones or distortion zones of different scales and occurrence indicating the distribution of faults and sutures along the profile. According to the electrical structure, the structural characteristics and space distribution of the Yalung Tsangpo suture, Bangong.Nujiang suture, and the major faults of Longmucuo (龙木错) and Geerzangbu are inferred.
基金funded by the National Key Research and Development Program‘Deep Land Resources Exploration and Exploitation’special project(2017YFC0603106)the Project of Science and Technology Department of the Southwest Oil and Gas Field Company,Petrochina(20210301-02)。
文摘Based on 2D and 3D seismic data,the latest drilling data and field outcrop data of the northern slope of the Central Sichuan paleo-uplift,the structural analysis method is used to analyze unconformity development characteristics and fault characteristics during the key structural transformation period,discussing the influence of the structural characteristics on the hydrocarbon accumulation of deep carbonate rocks.The results show that:(1)The two key unconformities of the Tongwan and Caledonian periods were primarily developed in deep carbonate rocks.Firstly,Tongwan’s unconformities are characterized by regional disconformities between the second and third members of the Dengying Formation,the top formation of the Sinian and the lower Cambrian,strips of which zigzag through the north and south sides of the study area.Secondly,the Caledonian unconformity is characterized by a regional unconformable contact between the lower Permian and the ower Paleozoic strata.From NE to SW,the age of the strata,which were subject to erosion,changes from new to old,the denudation distribution showing as a nose-shaped structure which inclines towards the ENE.(2)Boundary fault and transtensional strike-slip faults developed in the Sinian to Paleozoic strata.In profile,there are three types of structural styles:steep and erect,flower structures,’Y’and reversed’Y’type faults.In plane view,the Sinian developed extensional boundary faults extending in an almost NS direction,strike-slip faults developing and extending linearly in approximately EW,WNW and NE strikes in the Cambrian,with characteristically more in the south and less in the north.(3)The faults in the northern slope show obvious zonal deformations in transverse view as well as significant stages and stratified activity in a longitudinal direction.Among them,the activity of faults in the Sinian was the strongest,followed by the activity in the Cambrian period,the activity intensity of faults in the Permian period being the weakest.This fault activity can be divided into four periods:Sinian,Cambrian-Permian,the early Indosinian period and the late Indosinian-Himalayan period,the transtensional strikeslip faults being the products of oblique extensions of pre-existing weak zones in the Xingkai and Emei taphrogenesis,with a particular inheritance in the main faults.(4)Combined with hydrocarbon accumulation factors,it is considered that the epigenetic karstification of the Tongwan and Caledonian unconformities in the northern slope controlled the formation and distribution of carbonate karst reservoirs over a large area,also acting as a good pathway for oil and gas migration.The extensional faults developed at the margin of the NS trending rift,controlling the sag-platform sedimentary pattern in the Dengying Formation of the Sinian.Strike-slip faults in NE,WNW and ENE directions may control the microgeomorphological pattern inside the platform and intensify the differential distribution of grain beach facies.The multi-stage hereditary activity of strike-slip faults not only improved the porosity and permeability of the reservoirs,but also acted as the main channel of oil and gas migration,providing favorable conditions for the development of the current multi-layer gasbearing scenario in the northern slope of the Central Sichuan Basin.
基金Supported by National Natural Science Foundation of China(Grant No.51675180)National Key Basic Research Program of China(973 Program,Grant No.2013CB037503)
文摘To improve the adaptability of TBMs in diverse geological environments,this paper proposes a reconfigurable Type-V thrust mechanism(V-TM)with rearrangeable working states,in which structural stiffness can be automatically altered during operation.Therefore,millions of configurations can be obtained,and thousands of instances of working status per configuration can be set respectively.Nonetheless,the complexity of configurations and diversity of working states contributes to further complications for the structural stiffness algorithm.This results in challenges such as difficulty calculating the payload compliance index and the environment adaptability index.To solve this problem,we use the configuration matrix to describe the relationship between propelling jacks under reconfiguration and adopt pattern vectors to describe the working state of each hydraulic cylinder.Then,both the dynamic compatible equation between propeller forces of the hydraulic cylinders and driving forces,and the kinematic harmonizing equation between the hydraulic cylinder displacements and their deformations are established.Next,we derive the stiffness analytical equation using Hooke’s law and the Jacobian Matrix.The proposed approach provides an effective algorithm to support structural rigidity analysis,and lays a solid theoretical foundation for calculating the performance indexes of the V-TM.We then analyze the rigidity characteristics of typical configurations under different working states,and obtain the main factors affecting structural stiffness of the V-TM.The results show the deviation degree of structural parameters in hydraulic cylinders within the same group,and the working status of propelling jacks.Finally,our constructive conclusions contribute valuable information for matching and optimization by drawing on the factors that affect the structural rigidity of the V-TM.
基金supported by the National Natural Science Foundation of China(Grant Nos.11272048,51239006,and 11034010)the European Commission MarieCurie Actions(Grant No.IRSES-294976)the National Basic Research Program of China(Grant No.2010CB731504)
文摘Two-dimensional disordered granular assemblies composed of 2048 polydispersed frictionless disks are simulated using the discrete element method. The height of the first peak of the pair correlation function, gl, the local and global bond orientational parameters ψ6^1 and ψ6^g, and the fluctuations of these parameters decrease with increasing polydispersity s, implying the transition from a polycrystalline state to an amorphous state in the system. As s increases, the peak position of the boson peak aJBp shifts towards a lower frequency and the intensity of the boson peak D(ωBP)/ωBp increases, indicating that the position and the strength of the boson peak are controlled by the polydispersity of the system. Moreover, the inverse of the boson peak intensity ωBP/D(ωBP), the shear modulus G, and the basin curvature SIS all have a similar dependence on s, implying that the s dependence of the vibrational density of states at low frequencies likely originates from the s dependence of the basin curvature.
基金Program for Key National Fundamental Research"Program 973"(2009CB421501)Natural Science Foundation of China(40875026)+1 种基金Specialized Scientific Research for Public Welfare Industry(Meteorological Sector)(GYHY200906008)Meteorological Sciences Research Project on Early Warning and Forecasting Technology for Marine Meteorology of the Guangdong Provincial Bureau of Meteorology
文摘Using the NCEP 1°×1°reanalysis data,several obvious differences of the structural characteristics of developed versus undeveloped mid-level vortexes are studied.First,the central vorticity of the developed mid-level vortex increases towards higher levels while the undeveloped one decreases.The low-level convergence structure maintains well in the developed mid-level vortex whereas the undeveloped one does badly.Second,on the one hand,according to the symmetric analysis,the horizontal wind field and wind vertical section of the developed mid-level vortex are well symmetric while those of the undeveloped one are less symmetric.Meanwhile,weak wind vertical shear help the developed mid-level vortex to establish a warm core in upper-and mid-levels of the troposphere.On the other hand,according to the balance analysis,better balance between wind and pressure is shown in the mid-and lower-levels of the troposphere of the developed mid-level vortex than in those of the undeveloped vortex.Third,positive anomaly of potential vorticity is enhanced and developed in the vertical direction of the developed vortex.However,the undeveloped vortex weakens with a weak positive anomaly.
基金Funded by the National Science Foundation of China Through Outstanding Youth Scientist Foundation (No. 59825102) and Science Foundation of Hubei Province(No. 98J028).
文摘Structural characteristics, chemical bonds and thermoelectric properties of Al-doped boron carbides are studied through calculations of various structural unit models by using a self-consistent-field discrete variation X. method. The calculations show that Al atom doped in boron carbide is in preference to substituting B or C atoms on the end of boron carbide chain, and then may occupy interstitial sites, but it is difficult for Al to substitute B or C atom in the centers of the chain or in the icosahedra. A representative structural unit containing an Al atom is [C - B -Al]-[B11C]-,while the structural unit without Al is [C-B-B(C)]- - [B11C]C+, and the coexistence of these two different structural units makes the electrical conductivity increased. As the covalent bond of Al-B or Al-C is weaker than that of B-B or B-C, the thermal conductivity decreases when Al is added into boron carbides. With the electrical conductivity increasing and the thermal conductivity decreases, Al doping has significant effect on thermoelectric properties of baron carbides.
基金financially supported by the Program of the China Geological Survey (grant No.12120114012501 and 1212011120608)
文摘The Suoluogou gold deposit in Muli County of Sichuan Province is located in the southern section of the Ganzi- Litang suture zone (Figs. la, b), which is the largest gold deposit discovered in this suture zone in recent years. At present, the exploration of the Suoluogou gold deposit is still in progress, and the amount of resource is increasing.
基金Supported by the National Natural Science Fund of China(No.31301441)the Cooperation in Production,Study and Research of Science and Technology Major Projects of Fujian Province(2012N5004)+2 种基金the Natural Science Foundation of Fujian Province(2012J01081)the Scientific and Technological Innovation Team Support Plan of Institution of Higher Learning in Fujian Province([2012]03)the Scientific and Technological Innovation Team Support Plan of Fujian Agriculture and Forestry University(cxtd12009)
文摘Semen coicis resistant starch is a type of starch which has undergone retrogradation. In this study,the structural characteristics of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Semen coicis resistant starch were investigated. The field emission scanning electron microscopy results indicated that compared to Semen coicis native starch and high-amylose maize starch,the surface of heat-moisture treated Semen coicis resistant starch was rough and full of irregular layered strips. The Fourier transform infrared spectroscopy measurements indicated the degree of ordered structure values of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Semen coicis resistant starch are 1.355,1.372,and 1.410,respectively,and the degree of double helix values is 1.931,1.942,and 2.027,respectively,indicating that the degree of ordered structure and double helix structure of heat-moisture treated Semen coicis resistant starch is both higher than those of Semen coicis native starch and high-amylose maize starch. ^(13) C nuclear magnetic resonance spectroscopy showed that Semen coicis native starch and high-amylose maize starch exhibited A-type crystal structures,while heat-moisture treated Semen coicis resistant starch displayed B-type crystal structures. The relative crystallinity of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Semen coicis resistant starch is 76.41,85.36,and 87.25,respectively,and the percentages of amorphous region are 5.78,4.72,and 4.39,respectively. Additionally,heat-moisture treated Semen coicis resistant starch could increase the proliferation of Bifidobacterium bifidum more than Semen coicis native starch or high-amylose maize starch. Bifidobacterium bifidum displayed a higher tolerance under simulated gastrointestinal tract conditions such as low p H,bile acid,pepsin,and trypsin in heat-moisture treated Semen coicis resistant starch medium than in Semen coicis native starch or high-amylose maize starch media.
基金jointly supported by the National Key R&D Program of China(2018YFD1100804)。
文摘Emergency road networks(ERNs),an important part of local disaster prevention systems,can provide security to residents and their property.Exploring the ERNs structure is of great significance in terms of promoting disaster prevention and establishing road safety in dangerous mountainous areas.This study considered the ERNs of the Kangding section of the Dadu River Basin as the area for a case study.Complex Network Analysis was used to examine the relationship between the four characteristic indicators of mountain roads and the degree of earthquake impacts under the Lushan,Wenchuan,and Kangding Earthquake scenarios.Based on the analysis results,the southwest mountain road network was evaluated;then,computer simulations were used to evaluate the structural changes in the road network after index changes.The network was optimized,and the corresponding emergency avoidance network was proposed to provide a reference for the establishment of the mountainous ERN.The results show that the overall completeness of the mountainous ERNs in Southwest China is poor and prone to traffic accidents.Moreover,the local stability is poor,and the network is susceptible to natural hazards.The overall structure of the road network is balanced,but that of certain road sections is not.Road sections with different attributes present a“gathering-scattering”spatial distribution,i.e,some sections are clustered together while others are far apart.Accordingly,a planning optimization strategy is proposed to better understand the complexity and systematic nature of the mountainous ERN as a whole and to provide a reference for disaster prevention and mitigation planning in mountainous regions in Southwest China.
基金supported by the National Natural Science Foundation of China (No. 50772133)
文摘MgNi-based hydrogen storage alloys Mg1–xTixNi (x = 0, 0.1, 0.2, and 0.3) were prepared by means of mechanical alloying. Mg in the alloy was partially substituted by Ti to improve the cycle stability of the alloys. The effects of the substitution of Ti for Mg on the microstructure and electrochemical performances of the alloys were investigated in detail. The results indicate that the substitution of Ti for Mg obviously decreases the discharge capacity, but it significantly improves their cycle stabilities. The microstructure of the alloys analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM) shows that the alloys have a dominatingly amorphous structure. The substitution of Ti for Mg helps to improve the anti-oxidation/corrosion ability of the MgNi alloy but demolishes the electrochemical kinetics of hydrogenation/dehydrogenation. The Mg0.9Ti0.1Ni alloy electrode milled for 80 h exhibits the best integrative capability, which has the maximal discharge capacity of 331.66 mAh/g and the C30/Cmax of 63.65%.