A fast 3D reconstruction method based on structured light to measure various parameters of the raceway groove is presented. Digital parallel grating stripes distributed with sine density are projected onto the raceway...A fast 3D reconstruction method based on structured light to measure various parameters of the raceway groove is presented. Digital parallel grating stripes distributed with sine density are projected onto the raceway groove by a DLP projector, and distorting of stripes is happened on the raceway. Simultaneously, aided by three-step phase-shifting approach, three images covered by different stripes are obtained by a high-resolution CCD camera at the same location, thus a more accuracy local topography can be obtained. And then the bearing is rotated on a high precision computer controlled rotational stage. Three images are also obtained as the former step at next planned location triggered by the motor. After one cycle, all images information is combined through the mosaics. As a result, the 3D information of raceway groove can be gained. Not only geometric properties but also surface flaws can be extracted by software. A preliminary hardware system has been built, with which some geometric parameters have been extracted from reconstructed local topography.展开更多
In order to improve the accuracy of auto parts production and processing,and reduce the error of parts manufacturing,a 3D scanning modelling of auto parts for intelligent driving is designed in this paper.With the hel...In order to improve the accuracy of auto parts production and processing,and reduce the error of parts manufacturing,a 3D scanning modelling of auto parts for intelligent driving is designed in this paper.With the help of the structured light projection method,the auto parts image is obtained,and its horizontal axis grey value and stripe pixel value are analysed.The contour parameters are determined by k-frame strategy,and the width,length and height parameters of the external contour of vehicle parts are obtained.The basic principle of 3D scanning technology is analysed,its scanning process is designed,and the modelling of auto parts is realised with the help of 3D scanning technology.The experimental results show that the modelling method can effectively improve the machining accuracy and reduce the manufacturing error of the auto parts.展开更多
基金This project is supported by National Natural Science Foundation ofChina (No.50375047).
文摘A fast 3D reconstruction method based on structured light to measure various parameters of the raceway groove is presented. Digital parallel grating stripes distributed with sine density are projected onto the raceway groove by a DLP projector, and distorting of stripes is happened on the raceway. Simultaneously, aided by three-step phase-shifting approach, three images covered by different stripes are obtained by a high-resolution CCD camera at the same location, thus a more accuracy local topography can be obtained. And then the bearing is rotated on a high precision computer controlled rotational stage. Three images are also obtained as the former step at next planned location triggered by the motor. After one cycle, all images information is combined through the mosaics. As a result, the 3D information of raceway groove can be gained. Not only geometric properties but also surface flaws can be extracted by software. A preliminary hardware system has been built, with which some geometric parameters have been extracted from reconstructed local topography.
文摘In order to improve the accuracy of auto parts production and processing,and reduce the error of parts manufacturing,a 3D scanning modelling of auto parts for intelligent driving is designed in this paper.With the help of the structured light projection method,the auto parts image is obtained,and its horizontal axis grey value and stripe pixel value are analysed.The contour parameters are determined by k-frame strategy,and the width,length and height parameters of the external contour of vehicle parts are obtained.The basic principle of 3D scanning technology is analysed,its scanning process is designed,and the modelling of auto parts is realised with the help of 3D scanning technology.The experimental results show that the modelling method can effectively improve the machining accuracy and reduce the manufacturing error of the auto parts.
