Pore-scale modeling of pore structure properties and wettability effect on permeability of low-rank coal

Permeability is a key parameter for coalbed methane development.Although the absolute permeability of coal has been extensively studied,wettability and pore structure properties continue to challenge the microscopic description of water-gas flow in coal.For this purpose,we reconstructed the microstructures of low-rank coal using micro-computed tomography(micro-CT)images.Pore geometry and pore-throat parameters are introduced to establish a relationship with absolute permeability.A dual-porosity pore network model is developed to study water-gas displacement under different wetting and pore structure properties.Results show that absolute permeability is significantly affected by pore geometry and can be described using a binary quadratic function of porosity and fractal dimension.Water-gas relative permeability varies significantly and the residual gas saturation is lower;the crossover saturation first decreased and then increased with increasing porosity under hydrophobic conditions.While the water relative permeability is lower and a certain amount of gas is trapped in complex pore-throat networks;the crossover saturation is higher under hydrophilic conditions.Models with large percolating porosity and well-developed pore networks have high displacement efficiency due to low capillary resistance and avoidance of trapping.This work provides a systematic description of absolute permeability and water-gas relative permeability in coal microstructure for enhanced gas recovery.

Electronic Structure Properties in the Nematic Phases of FeSe

We investigate the electronic structures of FeSe in the presence of different possible orders and spin-orbit coupling （SOC）. It is found that only the ferro-orbital order （FO） and the collinear antiferro-magnetism （C-AFM） can simultaneously induce splittings at F and M. Bicollinear antiferro-magnetism （B-AFM） and SOC have very similar band structures on F-M near the Fermi level. The temperature T insensitive splitting at F and the T-dependent splitting at M observed in recent experiments can be explained by the d-wave bond nematic （dBN） order together with SOC. The recent observed Dirac cones and their T-dependence in FeSe thin films can also be well explained by the dBN order together with the band renormMization. Their thickness- and cobalt-doping- dependent behaviors are the consequences of electron doping and reduction of Se height. All these suggest that the nematic order in the FeSe system is the dBN order.

Study on Functional and Structure Properties of Soluble Dietary Fiber Modified by Extrusion-expansion Technology from Peanut Shells

[Objectives] This study was conducted to investigate the feasibility of using modified peanut dietary fiber as a functional food ingredient. [Methods]Using peanut shells as a test material,the process parameters of soluble dietary fiber( SDF) modified by extrusion and expansion were studied,and the functional and structural characteristics of SDF before and after modification were discussed. [Results] The optimum conditions were as follows: screw speed 200 rpm,temperature 130 ℃ and moisture content 20 %,and the SDF extraction yield was 22. 3%. The modified SDF showed BCmax values of( 378. 5 ± 5. 3),( 278. 3 ± 3. 2)and( 167. 2 ± 2. 5) μmol/g and BCmin of( 30. 4 ± 1. 3),( 63. 4 ± 3. 7) and( 71. 3 ± 4. 2) μmol/L,for Pb,As and Cu,respectively,indicating that the adsorption to the three heavy metals was enhanced. The modified SDF had a porous network like honeycomb and swelled structure. [Conclusions]Therefore,it is feasible to modify SDF by extrusion and expansion.

Structure,electronic,and nonlinear optical properties of superalkaline M_(3)O(M=Li,Na)doped cyclo[18]carbon

Cyclo[18]carbon has received considerable attention thanks to its novel geometric configuration and special electronic structure.Superalkalis have low ionization energy.Doping a superalkali in cyclo[18]carbon is an effective method to improve the optical properties of the system because considerable electron transfer occurs.In this paper,the geometry,bonding properties,electronic structure,absorption spectrum,and nonlinear optical(NLO)properties of superalkaline M_(3)O(M=Li,Na)-doped cyclo[18]carbon were studied by using density functional theory.M_(3)O and the C_(18) rings are not coplanar.The C_(18) ring still exhibits alternating long and short bonds.The charge transfer between M_(3)O and C_(18) forms stable[M_(3)O]+[C_(18)]-ionic complexes.C_(18)M_(3)O(M=Li,Na)shows striking optical nonlinearity,i.e.,their first-and second-order hyperpolarizability(βvec andγ||)increase considerably atλ=1907 nm and 1460 nm.

Recent progress in flexible capacitive sensors:Structures and properties

The future intelligent era that will be brought about by 5G technology can be well predicted.For example,the connection between humans and smart wearable devices will become increasingly more intimate.Flexible wearable pressure sensors have received much attention as a part of this process.Nevertheless,there is a lack of complete and detailed discussion on the recent research status of capacitive pressure sensors composed of polymer composites.Therefore,this article will mainly discuss the key concepts,preparation methods and main performance of flexible wearable capacitive sensors.The concept of a processing“toolbox”is used to review the developmental status of the dielectric layer as revealed in highly cited literature from the past five years.The preparation methods are categorized into types of processing:primary and secondary.Using these categories,the preparation methods and structure of the dielectric layer are discussed.Their influence on the final capacitive sensing behavior is also addressed.Recent developments in the electrode layer are also systematically reviewed.Finally,the results of the above discussion are summarized and future development trends are discussed.

Synthesis,Crystal Structure and Properties of a 3-Fold Interpenetrating 3D Cd(Ⅱ)Complex Derived from 4-(2-Methyl-1H-imidazol-1-yl)benzoic Acid

A new Cd~Ⅱ coordination complex,namely [Cd（iba）_2]_n（1）,was prepared by the hydrothermal reaction of Cd（NO_3）_2·4H_2O with 4-imidazol-1-yl-benzoic acid（Hiba）. Single-crystal X-ray diffraction analysis shows that compound 1 crystallizes in monoclinic system,space group Cc with a = 11.403（4）,b = 30.480（9）,c = 7.732（3） ？,β = 130.189（4）o,V = 2503.0（1） ？~3,Z = 4,C_（22）H_（18）CdN_4O_4,Mr = 514.80,Dc = 1.666 g/cm^3,F（000） = 1032 and μ（Mo Kα） = 1.101 mm-1. The final R and wR are 0.0573 and 0.1823 for 4421 observed reflections with I 〉 2σ（I）. Each iba-ligand coordinates in a bidentate fashion,connecting the Cd（Ⅱ） atoms to form a 2D wave-shape layer structure,which can be simplified as a four-connected topological net. Interestingly,the 2D layers are further extended into a 3-fold interpenetrating 3D architecture. Compound 1 displays an emissive maximum at 455 nm in the solid state at room temperature and a response of the second harmonic generation（SHG） activity is approximately 0.8 times that of KDP.

Effect of Aluminum Addition on Microstructure and Properties of SiO_2-B_2O_3-Al_2O_3-CaO Vitrified Bond

Influence of aluminum addition on the structures and properties of SiO_2-B_2O_3-Al_2O_3-CaO vitrified bond at low sintering temperature and high strength was discussed. FTIR and XRD analyses were used to characterize the structures of the basic vitrified bond with different contents of aluminum. The bending strength and the thermal expansion coefficients were also tested. Meanwhile, the microstructures of composite specimens at sintering temperature of 660 ℃ were observed by scanning electron microscope（SEM）. The experimental results showed that the properties of vitrified bond with 1wt% aluminum were improved significantly, where the bending strength, Rockwell hardness, and thermal expansion coefficient of the vitrified bond reached 132 MPa, 63 HRB, and 6.73×10^（-6） ℃^（-1）, respectively.

Formation, Structure and Properties of Bulk Metallic Glasses

Bulk metallic glasses with up to 72 mm critical section thickness have been obtained by conventional casting techniques and the properties of these materials, particularly the mechanical and magnetic properties have been studied. These materials have been demonstrated to have novel properties which are fundamentally different from their crystalline counterparts. The recent status of research and development in formation, structure and properties of bulk metallic glasses is reviewed. The techniques to produce such bulk glasses are summarized and the glass forming ability and the critical cooling rate of these materials are discussed. Further consideration of the development and application of this new class of materiaIs will be proposed.

Structure,Properties and Behavior of Kyanite:Use in Refractory Monolithics

1 Introduction Kyanite is an important naturally occurring in-dustrial mineral and is used in the manufacture of avariety of industrial ceramic products; notable exam-ples include refractories and porcelains. It is a high-pressure polymorph of the aluminosilicates of the ne-sosilicate group, which includes kyanite, sillimanite,and andalusite. These three aluminous or alumina-rich minerals are chemically identical with the compo-sition, Al;SiO;, but have different crystal structuresand physical properties. It is, however, their alumina

Structure and Properties of Degradable Polybutylene Succinate Fibers

Polybutylene succinate(PBS)fiber is a kind of synthetic fibers with excellent properties and biodegradability,which has been produced on a large scale in China.To investigate the application properties of PBS fibers,the structure and properties were systematically studied in this paper.The microstructures and thermal properties of PBS fibers were analyzed by Fourier transform infrared(FTIR)spectroscopy,X-ray diffraction(XRD),scanning electron microscopy(SEM),thermo gravimetric(TG)and differential scanning calorimetry(DSC).The mechanical properties,chemical stability and dyeing properties of PBS fibers were also studied.The results show that PBS fibers areα-crystalline with a crystallinity of 58.56%.PBS fibers have an excellent thermal stability and the initial temperature of thermal degradation is 370℃.The tensile strength,the elongation at break,the elastic recovery rate at a fixed elongation(5%)and the moisture regain rate of PBS fibers are 29.57 cN/tex,90.94%,44.55%and 5.04%,respectively.The chemical stability is as follows:alkali resistance<acid resistance<oxidation resistance.PBS fibers have an excellent dye uptake by carrier dyeing of disperse dyes.

Modificatin of ITZ Structure and Properties of Regenerated Concrete

By means of reducing the ratio of water to cement （ w/c ）, incorporating a proper amount of fly ash and superplasticizer , and processing the surface of recycled aggregate （ RA ）, this paper aims at improving the interfacial transition zone （ITZ） submicro- structure of the regenerated concrete （ RC ）. The experimental resuits of mercury intrusion pressure （MIP） show that RA pretreated by PVA polymer solution and lyophobic active agent can jam its surface pore and hole, thus the porosity of RA is decreased. When reducing w/c ratio, incorporating 20% of fly ash （ FA ） and 2.5% of superplasticizer （ to cement ） in the RC , the width of ITZ is effectively narrowed, the structure of ITZ is combined much more compact and the compressive strength of RC is enhanced. Under the same conditions, using RA pretreated by 1% PVA polymer solution, the fluidity of fresh RC can be enhanced and the compressive strength of hardened RC can also be enhanced lightly. Whereas using RA pretreated by lyophobic active agent, the fluidity of fresh RC can be enhanced , but it impairs the adhesion of fresh cement paste and the surface of old concrete, and hinders the strength development of RC. In the ITZ structure of ordinary concrete （prepared with natural coarse and fine aggregate ）, there are much Ca （ OH）2, in plank-and sheet-like, distributing with priority tropism, whereas in the RC structure, Ca（ OH）2 with a coarse size is not found in ITZ ; the main reason is that the surface of coarse aggregate does not have a layer of water film.

Crystal Structure and Magnetic Properties of a Dinuclear Terbium Compound Tb_2(μ_2-anthc)_4(anthc)_2(1,10-phen)_2

A dinuclear Tb（Ⅲ） compound, Tb_2（μ_2-anthc）_4（anthc）_2（1,10-phen）_2（1, Hanthc = 9-anthracenecarboxylic acid and 1,10-phen = 1,10-phenanthroline）, was synthesized under solvothermal condition and structurally characterized by single-crystal X-ray diffraction. Compound 1 crystallizes in the triclinic system, space group P1, with a = 12.5061（12）, b = 13.3168（10）, c = 15.0079（12） ？, α = 110.620（7）, β = 102.941（7）, γ = 107.036（7）o, V = 2081.8（3） ？~3, Z = 1, C_（114）H_（70）N_4O_（12）Tb_2, M_r = 2005.58, D_c = 1.600 g/cm^3, μ = 1.759 mm^（-1）, F（000） = 1008, the final R = 0.0294 and w R = 0.0608 for 8900 observed reflections with I 〉 2s（I）. In compound 1, two Tb（Ⅲ） ions are linked by four carboxylate groups of the bridging anthc– ligands to give a dinuclear Tb_2（μ_2-anthc）_4 unit wherein each Tb（III） ion is further capped by a terminal anthc– ligand and a 1,10-phen ligand in a chelating fashion. Detailed direct-current and alternating-current susceptibility measurements showed no slow magnetism relaxation phenomenon was observed for 1.

Influence of Deposition Temperature and Pressure on Microstructure and Tribological Properties of Arc Ion Plated Ag Films

The films deposited at low temperature（LT-films） have increasingly attracted theoretical and technical interests since such films exhibit obvious difference in structure and performances compared to those deposited at room temperature.Studies on the tribological properties of LT-films are rarely reported in available literatures.In this paper,the structure,morphology and tribological properties of Ag films,deposited at LT（166 K） under various Ar pressures on AISI 440C steel substrates by arc ion plating（AIP）,are studied by X-ray diffraction（XRD）,atomic force microscopy（AFM） and a vacuum ball-on-disk tribometer,and compared with the Ag films deposited at RT（300 K）.XRD results show that（200） preferred orientation of the films is promoted at LT and low Ar pressure.The Crystallite sizes are 70 nm-80 nm for LT-Ag films deposited at 0.2 Pa and 0.8 Pa and larger than 100 nm for LT-Ag films deposited at 0.4 Pa and 0.6 Pa,while they are 55 nm-60 nm for RT-Ag films deposited at 0.2 Pa-0.6 Pa and 37 nm for RT-Ag films deposited at 0.8 Pa.The surfaces of LT-Ag films are fibre-like at 0.6 Pa and 0.8 Pa,terrace-like at 0.4 Pa,and sphere-like at 0.2 Pa,while the surfaces of RT-Ag films are composed of sphere-like grains separated by voids.Wear tests reveal that,due to the compact microstructure LT-Ag films have better wear resistances than RT-Ag film.These results indicate that the microstructure and wear resistance of Ag films deposited by AIP can be improved by low temperature deposition.

Structure and Magnetic Properties of Fe_(76.5)Si_(13.5)B_9Cu_1 Alloy with Nanoscale Grain Size

The structure and magnetic properties of Fe76.5Si13.5B9Cu1 alloys with a nanocrystalline (NC) bcc Fe(Si) phase trom about 23 to 46 nm in diameter, which were first formed into amorphous ribbons and then annealed at various temperatures between 703 and 773 K, have been investigated. At annealing temperatures from 703 to 748 K, the single NC bcc(Si) phase is obtained in the crystallized alloys. The grain size and the Si-content in the NC bcc Fe(Si) phase for the alloys annealed at different temperatures are presented. The soft magnetic properties and the saturation magnetostriction for the alloys with the NC bcc Fe(Si) phase are also measured. The results show that, the saturation magnetizotion and the permeability are improved for the alloys with only the NC bcc Fe(Si) phase and become better with decreasing of the NC bcc phase size, and the saturation magnetostriction declines for the alloys with increasing Si-content in the NC bcc Fe(Si) phase.

Impact of Surface Passivation on the Electronic Structure and Optical Properties of the Si1-xGex Nanowires

The electronic structures and optical properties of the [llO]-oriented Sil-xGex nanowires （NWs） passivated with different functional groups （-H, -F and-OH） are investigated by using first-principles calculations. The results show that surface passivation influences the characteristics of electronic band structures significantly： the band gap widths and types （direct or indirect） of the Si1-xGe, NWs with different terminators show complex and robust variations, and the effective masses of the electrons in the NWs can be modulated dramatically by the terminators. The study of optical absorption shows that the main peaks of the parallel polarization component of Si1-x Gex NWs passivated with the functional groups exhibit prominent changes both in height and position, and are red-shifted with respect to those of corresponding pure Si NWs, indicating the importance of both the terminators and Ge concentrations. Our results demonstrate that the electronic and optical properties of Si1-xGex NWs can be tuned by utilizing selected functional groups as well as particular Ge concentrations for customizing purposes.

Crystal Structures,Characterizations and Fluorescence Properties of Two 3D Ca(Ⅱ)/Sr(Ⅱ)Coordination Polymers Based on 2-Sulfoterephthalate

Two alkaline earth metal coordination polymers [M（2-Hstp）（H2O）] （M = Ca2＋ （1） and Sr2＋ （2）, 2-H3stp = 2-sulfoterephthalate） were synthesized under hydrothermal conditions by the precursor [Mn（2-Hstp）2（4,4？-Hbpy）2] and alkaline earth metal salts. The two alkaline earth complexes are not isomorphic. Complex 1 crystallizes in the monoclinic space group P21/m, while 2 in the monoclinic space group P21/c, despite of their similar formulas. In 1, the Ca2＋ ion lies in a seven-coordinated pentagon bipyramidal configuration, coordinated with five 2-Hstp2- anions and one water molecule. However, the Sr2＋ ion in 2 is coordinated by nine oxygen atoms to form a single-capped square antiprism polyhedron. Both 1 and 2 exhibit π-π＊ emission of the 2-sulfotere- phthalate ligand.

Structure and magnetic properties of Osn （n=11～22） clusters

The structure and magnetic properties of Osn （n=11～22） clusters are systematically studied by using density functional theory （DFT）. For each size, the average binding energy per atom, the second-order differences of total energies and the highest occupied molecular orbital （HOMO）–the lowest unoccupied molecular orbital （LUMO） gaps are calculated to analyze the stability of the cluster. The structures of Os14 and Os18 clusters are based on a close-packed hexagonal structure, and they have maximum stabilities, so n=14, 18 are the magic numbers. The 5d electrons play a dominant role in the chemical reaction of Osn clusters. The magnetic moments of Osn clusters are quenched around n=12, and when n=18～22 the value approximates to zero, due to the difference of electron transfer.

Theoretical study on electronic structure and thermoelectric properties of PbS_xTe_(1-x)(x = 0.25, 0.5, and 0.75) solid solution

The electronic structure and thermoelectric（TE） properties of PbS_xTe_（1-x）（x = 0.25, 0.5, and 0.75） solid solution have been studied by combining the first-principles calculations and semi-classical Boltzmann theory. The special quasirandom structure（SQS） method is used to model the solid solutions of PbS_xTe_（1-x）, which can produce reasonable electronic structures with respect to experimental results. The maximum zT value can reach 1.67 for p-type PbS0.75Te0.25 and 1.30 for PbS0.5Te0.5 at 800 K, respectively. The performance of p-type PbS_xTe_（1-x） is superior to the n-type ones, mainly attributed to the higher effective mass of the carriers. The z T values for PbS_xTe_（1-x） solid solutions are higher than that of pure Pb Te and Pb S, in which the combination of low thermal conductivity and high power factor play important roles.

Effect of Ga_2O_3 on Structure and Properties of Calcium Aluminate Glasses

The effect of Ga_2O_3 on the structure and properties of calcium aluminate glasses fabricated by vacuum melting process was investigated by Raman spectrum, differential scanning calorimeter（DSC）, and infrared spectrum methods. The results show that calcium aluminate glass network only consists of [AlO_4] tetrahedral units. With the gradual addition of Ga_2O_3, the quantity of [GaO_4] tetrahedral units increases. Substitution of Ga_2O_3 for Al_2O_3 results in a decrease in Tg, Tx, and Tp, and an increase in the thermal stable index ΔT. Similarly, the absorption band around 3.0 μm obviously reduces and the transparency in 4.0-6.0 μm rapidly increases with increasing Ga_2O_3 content. However, the chemical stability of calcium aluminate glasses decreases if Ga_2O_3 is introduced due to the increasing of [GaO_4] units in the glass network.

Synthesis,Crystal Structure,Physical Properties and Theoretical Studies of the New Ternary Sulfide with Closed Cavities:CsYb_7S_(11)

A novel ternary rare-earth sulfide, CsYb7S（11）, has been successfully synthesized by high-temperature solid-state reaction of an elemental mixture with modified Cs Cl flux. The single-crystal X-ray diffraction data reveal its orthorhombic symmetry in space group Cmca（no. 64） with a = 15.271（3）, b = 13.414（2）, c = 18.869（3） A°, V = 3865.2（2） A°^3, Z = 8, Mr = 1696.85, Dc = 5.832 g/cm^3, μ = 36.538 mm^-1, F（000） = 5768, the final R = 0.0225 and w R = 0.0517 for 2258 observed reflections with I 〉 2σ（I）, 2.67〈θ〈27.48o, w = 1/[σ^2（Fo^2） ＋（0.0443 P）2 ＋ 8.7453 P], where P =（Fo^2 ＋ 2Fc^2）/3, S = 1.036,（Δρ）max = 1.609 and（Δρ）min = –1.922. The remarkable structural feature is the dual tricapped Cs2@S18 cube closed cavities far apart within the three-dimensional [Yb7S（11）]-covalent bonding matrix. Magnetic susceptibility measurements show that the title compound exhibits temperature-dependent（50～300 K） para-magnetism and obey the Curie-Weiss law. Moreover, the optical gap of 2.03 Ev for CsYb7S11 was deduced from the UV/Vis reflectance spectroscopy and DFT study indicates an indirect band gap with an electronic transfer excitation of S-3p to Yb-5d orbital.