Polyethylene (PE) grafting 4-vinylpyridine copolymers has been produced as powders of different rushes by theirradiation method. After treatment with methylaluminoxane (MAO), the copolymers were used as supports for C...Polyethylene (PE) grafting 4-vinylpyridine copolymers has been produced as powders of different rushes by theirradiation method. After treatment with methylaluminoxane (MAO), the copolymers were used as supports for Cp_2ZrCl_2catalyst Results of X-ray photoelectron spectroscopy, Fourier transforms infrared spectroscopy, ultraviolet spectroscopy andscanning electron microscope measurements show that the catalytic sites have been linked through MAO on the PE-graft-4-vinylpyridine (PEVP). The percentages of grafting 4-vinylpyridine and supported Cp_2ZrCl_2 depend on the size ofpolyethylene powder. The smaller the polyethylene powder, the more percent of 4-vinylpyridine groups and Cp_2ZrCl_2 existon the polyethylene chains, and the PEVP-supported catalyst has a relatively high activity for ethylene polymerization.展开更多
Well-defined P4VP-b-PBLG diblock polymer composed of poly (4-vinylpyridine) (P4VP) and poly (γ-benzyl-L-glutamate) (PBLG) was synthesized by click reaction with alkyne- and azide-functionalized homopolymers. Besides,...Well-defined P4VP-b-PBLG diblock polymer composed of poly (4-vinylpyridine) (P4VP) and poly (γ-benzyl-L-glutamate) (PBLG) was synthesized by click reaction with alkyne- and azide-functionalized homopolymers. Besides, P4VP blocks were synthesized by copper-mediated atom transfer radical polymerization (ATRP) with a chlorine-containing alkyne bifunctional initiator, and the azido-terminated PBLG homopolymers were synthesized by ring-opening polymerization (ROP) of γ-benzyl-L-glutamate with an amine-containing azide initiator. In addition, the synthesized P4VP-b-PBLG with different block ratios has been characterized by proton nuclear magnetic resonance (1H NMR), Gel permeation chromatograph (GPC) and fourier transform infrated spectroscopy (FT-IR). Then, the self-assembly behaviors of P4VP-b-PBLG have been studied by changing parameters like dripping speed and block ratio. The morphologies of self-assembly of spherical, disk-like and ellipsoid-like shape particles have been observed and analyzed by scanning electron microscopy (SEM). These results have provided guidelines for the design of macromolecular self-assembly.展开更多
Carbon-13 NMR has become a powerful technique in studying polymer structures. A lot of parameters which are important in elucidating polymer structure can be obtained through 13C NMR analysis. Moreover, statistical be...Carbon-13 NMR has become a powerful technique in studying polymer structures. A lot of parameters which are important in elucidating polymer structure can be obtained through 13C NMR analysis. Moreover, statistical behavior of monomer addition process can be inspected.展开更多
To obtain a novel support with practical value for metallocene catalyst(\%η\%\|C\-5H\-5)TiCl\-3(CpTiCl\-3), poly(styrene\|co\|4\|vinylpyridine)/SiO\-2 nanoscale hybrid material(SrP/SiO\-2) was firstly produced as sup...To obtain a novel support with practical value for metallocene catalyst(\%η\%\|C\-5H\-5)TiCl\-3(CpTiCl\-3), poly(styrene\|co\|4\|vinylpyridine)/SiO\-2 nanoscale hybrid material(SrP/SiO\-2) was firstly produced as support. After pretreatment by methylaluminoxane(MAO), the hybrid materials reacted with CpTiCl\-3. The results from SAXS, SEM and TEM indicated the morphology and structure of organic/inorganic hybrid materials, and the size of inorganic particle in hybrid was nanoscale. The results from IR and XPS showed that there were two possible cationic active species in the hybrid\|supported catalyst, the polymerization results of styrene proved this possibility.展开更多
基金National Natural Science Foundation of China (No. 20272062)
文摘Polyethylene (PE) grafting 4-vinylpyridine copolymers has been produced as powders of different rushes by theirradiation method. After treatment with methylaluminoxane (MAO), the copolymers were used as supports for Cp_2ZrCl_2catalyst Results of X-ray photoelectron spectroscopy, Fourier transforms infrared spectroscopy, ultraviolet spectroscopy andscanning electron microscope measurements show that the catalytic sites have been linked through MAO on the PE-graft-4-vinylpyridine (PEVP). The percentages of grafting 4-vinylpyridine and supported Cp_2ZrCl_2 depend on the size ofpolyethylene powder. The smaller the polyethylene powder, the more percent of 4-vinylpyridine groups and Cp_2ZrCl_2 existon the polyethylene chains, and the PEVP-supported catalyst has a relatively high activity for ethylene polymerization.
文摘Well-defined P4VP-b-PBLG diblock polymer composed of poly (4-vinylpyridine) (P4VP) and poly (γ-benzyl-L-glutamate) (PBLG) was synthesized by click reaction with alkyne- and azide-functionalized homopolymers. Besides, P4VP blocks were synthesized by copper-mediated atom transfer radical polymerization (ATRP) with a chlorine-containing alkyne bifunctional initiator, and the azido-terminated PBLG homopolymers were synthesized by ring-opening polymerization (ROP) of γ-benzyl-L-glutamate with an amine-containing azide initiator. In addition, the synthesized P4VP-b-PBLG with different block ratios has been characterized by proton nuclear magnetic resonance (1H NMR), Gel permeation chromatograph (GPC) and fourier transform infrated spectroscopy (FT-IR). Then, the self-assembly behaviors of P4VP-b-PBLG have been studied by changing parameters like dripping speed and block ratio. The morphologies of self-assembly of spherical, disk-like and ellipsoid-like shape particles have been observed and analyzed by scanning electron microscopy (SEM). These results have provided guidelines for the design of macromolecular self-assembly.
文摘Carbon-13 NMR has become a powerful technique in studying polymer structures. A lot of parameters which are important in elucidating polymer structure can be obtained through 13C NMR analysis. Moreover, statistical behavior of monomer addition process can be inspected.
文摘To obtain a novel support with practical value for metallocene catalyst(\%η\%\|C\-5H\-5)TiCl\-3(CpTiCl\-3), poly(styrene\|co\|4\|vinylpyridine)/SiO\-2 nanoscale hybrid material(SrP/SiO\-2) was firstly produced as support. After pretreatment by methylaluminoxane(MAO), the hybrid materials reacted with CpTiCl\-3. The results from SAXS, SEM and TEM indicated the morphology and structure of organic/inorganic hybrid materials, and the size of inorganic particle in hybrid was nanoscale. The results from IR and XPS showed that there were two possible cationic active species in the hybrid\|supported catalyst, the polymerization results of styrene proved this possibility.
