Pyrolysis of vulcanized styrene-butadiene rubber via ReaxFF molecular dynamics simulation

Styrene-butadiene rubber(SBR)is widely used in tires in the automotive segment and vulcanization using sulfur is a common process to enhance its mechanical properties.However,the addition of sulfur as the cross-linking agent usually results in impurities in pyrolysis products during rubber recycling,and thus the desulfurization during tire pyrolysis attracts much attention.In this work,the pyrolysis of vulcanized SBR is studied in detail with the help of Reax FF molecular dynamics simulation.A series of crosslinked SBR models were built with different sulfur contents and densities.The following Reax FF MD simulations were performed to show products distributions at different pyrolysis conditions.The simulation results show that sulfur products distribution is mainly controlled by sulfur contents and temperatures.The reaction mechanism is proposed based on the analysis of sulfur products conversion pathway,where most sulfur atoms are bonded with hydrocarbon radicals and the rest transfer to H_(2)S.High sulfur contents tend to the formation of elemental sulfur intermediate,and temperature increase facilitates the release of H_(2)S.

MORPHOLOGY,INTERFACIAL INTERACTION AND PROPERTIES OF STYRENE-BUTADIENE RUBBER/MODIFIED HALLOYSITE NANOTUBE NANOCOMPOSITES

A natural nanotubular material,halloysite nanotubes(HNTs),was introduced to prepare styrene-butadiene rubber/modified halloysite nanotube(SBR/m-HNT) nanocomposites.Complex of resorcinol and hexamethylenetetramine (RH) was used as the interfacial modifier.The structure,morphology and mechanical properties of SBR/m-HNT nanocomposites,especially the interfacial interactions,were investigated.SEM and TEM observations showed that RH can not only facilitate the dispersion and orientation of HNTs in SBR matrix at ...

New Fabrication and Mechanical Properties of Styrene-Butadiene Rubber/Carbon Nanotubes Nanocomposite

A novel technology to prepare styrene-butadiene rubber （SBR）/carbon nanotubes （CNTs） composites was developed by combining a spray drying method and a subsequent mechanical mixing process. The cross-linking degrees of the vulcanized composites increased gradually with the additive CNTs contents. By comparing with those of the pure SBR composites, the mechanical properties such as tensile strength, tear strength and hardness of the composites filled with CNTs at certain contents were dramatically improved almost by 600%, 250% and 70%, respectively. The fabrication of the CNTs filled with SBR composites by combination of the spray drying method and subsequent mechanical mixing process was effective for enhancing the reinforcement effects of CNTs in rubbers. The novel technology can also open a new route for the modification and reinforcement on the nanocomposites with large amount of CNTs.

Insights into the Payne Effect of Carbon Black Filled Styrene-butadiene Rubber Compounds

As a widely used reinforcing filler of rubber, carbon black(CB) often enhances the nonlinear Payne effect and its mechanism still remains controversial. We adopt simultaneous measurement of rheological and electrical behaviors for styrene-butadiene rubber(SBR)/CB compounds and CB gel(CBG) during large deformation/recovery to investigate the contribution of conductive CB network evolution to the Payne effect of the compounds. In the highly filled compounds, the frequency dependence of their strain softening behavior is much more remarkable than that of their CB network breakdown during loading, while during unloading the unrecoverable filler network hardly affects the complete recovery of modulus, both revealing that their Payne effect should be dominated by the disentanglement of SBR matrix. Furthermore,the bound rubber adjacent to CB particles can accelerate the reconstruction of continuous CB network and improve the reversibility of Payne effect. This may provide new insights into the effect of filler network, bound rubber, and free rubber on the Payne effect of CB filled SBR compounds.

Performance development of styrene-butadiene copolymer-modified calcium sulfoaluminate cement mortar under different curing conditions

The purpose of this study was to investigate the change in the physical and mechanical properties of styrene-butadiene copolymer(SB)dispersion-modified calcium sulfoaluminate(CSA)cement mortar as it aged from 28 to 360 d,and cured at different temperatures and relative humidities.The results show that the mechanical properties of reference mortar(RM)of CSA cement,including its flexural,compressive,and tensile bond strength,showed a reduction after a certain time,but its water capillary absorption was hardly affected by age.When SB dispersion was added,there was no reduction in mechanical strength.The amount of SB added did matter.Addition of 5% SB had a negative effect on most properties compared with RM,except for tensile bond strength.However,the properties of SB-modified mortar(SBMM)were enhanced significantly as the amount of SB was increased from 5% to 20%.Temperature change had different effects on the properties of RM and SBMM.High temperature was beneficial to early flexural and compressive strength development of RM,but caused serious strength reduction at later stages.High temperature enhanced the development of tensile bond strength of RM.Increasing temperature enhanced properties of SBMM,including flexural,compressive,and tensile bond strength.Higher relative humidity improved all measured properties of all mortars.Scanning electron microscope(SEM)observations of the morphology of RM and SBMM at 360 d cured under different conditions accounted well for the changes in mechanical properties.

Synthesis and performance of miktoarm star copolymers of styrene and butadiene

A novel multifunctional macromolecular organolithium initiator （PD-Sn-（RLi）3） was prepared via living anionic polymerization and used for the synthesis of miktoarm star copolymers in cyclohexane. The average molecular weight, polydispersity index, microstructure and unit composition of the miktoarm star copolymers were characterized with GPC and 1H-NMR. Performances of the miktoarm star styrene-butadiene rubbers were investigated in comparison with those of the blend rubbers such as the tin-coupled star-shaped random copolymers of styrene-butadiene rubber（S-SBR）/natural rubber （NR） blend rubber and S-SBR/Cis-1, 4-polybutadiene rubber （Cis-BR） blend rubber.

STUDY ON THE SEQUENCE STRUCTURE OF SBR BY ^(13)C-NMR METHOD Ⅵ MONTE CARLO SIMULATION OF THE SEQUENCE OF SBR

A program of Monte Carlo simulation of binary copolymerization for E-SBR (emulsion polymn. SB rubber) was made according to the terminal model. The simulation results obtained by this program were in good agreement with those experimental ones. A detail microstructure information of E-SBR molecular chain has been provided.

A rheological method for selecting nano-kaolin powder as filler in SBR rubber

This paper shows that the stiffness ofstyrene-butadiene solid rubber with added kaolin powder is related to the yield stress of kaolin dispersion in liquid polybutadiene rubber up to the percolation threshold. For five kinds of kaolin powder, the value of τ° spans the range of 100-430 Pa, while the corresponding compressive elastic constant of SBR varies from 12 to 21 MPa. A relationship between τ° and △E^i^＊/ER^＊ is proposed. Critical examination of these data infers that kaolin powder dispersed in solid rubber matrix acts as an additive which decreases the random movement of the polybutadiene chains. Consequently, dispersions of nano-particles in liquid and in solid SBR are considered to be related, thus leading to a theological method for selecting nano-particles as fillers in solid SBR.