GRAFTED STYRENE-DIVINYLBENZENE COPOLYMERS CONTAINING BENZALDEHYDES AND THEIR WITTIG REACTIONS WITH VARIOUS PHOSPHONIUM SALTS

A chloromethylated styrene-divinylbenzene copolymer support system functionalized with 4-benzaldehyde and 2-benzaldehyde was prepared. The degree of functionalization with aldehyde groups is well suited for the subsequent use of the products as Wittig reagents. The polymer bound aldehyde was reacted with Wittig reagents to give olefin groups grafted on styrene-divinylbenzene copolymers. The reactions were carded out in phase transfer catalysis conditions. A simple procedure for the calculation of the degree of functionalization and the statistical modeling of the structural repetitive unit of the copolymer are reported.

Preparation and characterization of porous titania-grafted poly(styrene-divinylbenzene)/maleic anhydride nanocomposite microspheres

Mesoporous titania-grafted poly(styrene-divinylbenzene)/maleic anhydride [P(St-DVB)/MA] nanocomposite microspheres were prepared by an open ring reaction method.The titania nanoparticles were first modified by attachment of amino groups to their surface to prevent particle aggregation,and to allow the nanoparticles to covalently bond the polymer microspheres,the surface of which was modified by attachment of MA functional groups to enable the polymer to retain their porous structures and to react with the amino groups on the surface of the titania particles.The porous nanocomposite microspheres were detected by FTIR,SEM,TEM,XRD and UV-Vis spectrophotometry.The results indicated that the nanocomposite microspheres were composed of nanosized titania uniformly distributed on the surface,and exhibited better UV absorbing property than pure polymer microspheres or unmodified titania.Furthermore,compared with pure porous polymer microspheres,the nanocomposite microspheres showed more efficient UV protection and slow release of Parsol-1789(a photo-reactive and cosmetic agent) held inside the porous network of the microspheres.

Preparation and Characterization of Titania-grafted Poly(styrene-divinybenzene) Nanocomposite Microspheres

Titania-grafted poly（styrene-divinylbenzene）（TiO2/PSt-DVB） nanocomposite microspheres were prepared by an open-ring reaction and radical grafting copolymerization method. The TiO2 nanoparticles were first modified by attachment of epoxy groups to their surfaces to provide reactive groups that could covalently bond to the polymer （PSt-DVB） microspheres. The nanocomposite obtained was characterized by FTIR, SEM, XRD, and TGA analyses as well as UV-Vis spectrophotometry. The results indicated that the TiO2 nanoparticles were uniformly grafted onto the surface of the polymer microsphere producing grain sizes of about 5―10 μm. The modified TiO2 showed better UV absorbing property than the unmodified form, and the nanocomposite also retained the same UV absorbing property as the free modified TiO2 nanoparticle.

PREPARATION OF PARTICLE SIZE NARROWLY DISTRIBUTED LOW-DENSITY STYRENE DIVINYLBENZENE COPOLYMER MICROBEADS

In view of the importance of dispersion agent,the amount of the crosslinking monomer and the diluent in suspension polymerization for the production of particle size narrowly distributed low-density stryene divinylbenzene copolymer microbeads(LDPS),their actions are preliminarily investigated in this paper.Experimental results indicate that when both the gelatine and polyvinyl alcohol(PVA)are used dispersion agents,the better effect is achieved,DVB is helpful to the formation of the lower density fine particles,the proportionof the DVB/St should be between 1:1-1.5:1.Compared with toluene,gasoline is the more effective diluent for the above target.

SYNTHESIS OF THE POLYSTYRENE-TYPE ADSORBENTS CONTAINING POLAR GROUPS AND THEIR CAPACITIES IN THE ADSORPTION OF STEVIOSIDE AND GYPENOSIDES

<正> Seven polystyrene-type adsorbents (Ⅰ—Ⅶ) were synthesized by the modification of styrene-divinylbenzene copolymer respectively with hydroxymethyl, aminomethyl, methoxymethyl, phenoxymethyl, (4-hydroxy phenoxy)methyl, (4-acetylphenoxy)methyl, and acetyl groups. Their structures were characterized with chemical methods and physical techniques. The adsorption capacities of the adsorbents to stevioside and gypenosides were determined via batch test in which the HPLC method was used for the analysis of Saponin concentration of solution. The results showed that all the adsorbents could adsorb these saponins to a certain extent, but Ⅵ and Ⅶ had large capacities owing to their moderate polarities.

An analysis of fractal geometry of macromolecular gelation

<正> With fractal geometry theory and based on experiments, an analysis of fractal geometry behavior of gelation of macromolecules was carried out. Using the cross-linking copolymerization of styrene-divinylbenzene (DVB) as an example, through the determinations of the evolution of the molecular weight, size and the dependence of scattering intensity on the angle of macromolecules by employing laser and synchrotron small angle X-ray scattering, respectively, this chemical reaction was described quantitatively, its fractal behavior was analyzed and the fractal dimension was also measured. By avoiding the complex theories on gelation, this approach is based on modern physical techniques and theories to perform the analysis of the behavior of fractal geometry of macromolecular gelation and thus is able to reveal the rules of this kind of complicated gelation more essentially and profoundly.