Multicriteria Analysis by Codification for the Determination of Soil Landscape Units in Forest and Pre-Forest Zones of Cote D’Ivoire: The Case of the Square Degrees of M’Bahiakro and Daloa

The present study, carried out in the forest (Daloa) and pre-forest (M’Bahiakro) zones of Cote d’Ivoire, aims to determine soil landscape units using the coding method. Geological maps and satellite images (SRTM and Landsat) were used for this purpose. The methodological approach adopted consisted in producing maps of slope, geology, land use and topography using the codification method. These various maps, integrated into a GIS using the coding aggregation method, were used to generate soil landscape maps. Twenty-seven (27) soil landscapes have been identified for the pre-forest zone (M’Bahiakro), with a strong dominance of acid rock over a moderate relief under savannah, forest/degraded forest and crops/fallow. However, the forest zone (Daloa), with forty-one (41) soil landscapes identified over the entire zone, is characterized by a majority of mafic rocks on a medium altitude under forest/degraded forest, water and crops/fallow. The criteria used from the codification method (sum of aggregations) made it possible to predict the spatial distribution of soil map units according to agro-ecological environments in the humid intertropical zone. This is essential for the orientation and reinforcement of soil survey tools. However, a comparative evaluation of the different multicriteria analysis methods for coding and weighting soil landscape unit mapping would enable us to identify the most suitable and efficient method for drawing up base maps for soil surveys.

Failure mechanism and stability analysis of the Zhenggang landslide in Yunnan Province of China using 3D particle flow code simulation

Based on the principle of 3D particle flow code,a numerical landslide run-out model is presented to simulate the failure process of the Zhenggang landslide(in southwestern China) under the effect of water after a rainfall.The relationship between the micro-mechanical parameters and the macro-shear strength of the grain material is determined through numerical calibrations.Then the rainfall effect is considered in numerical simulations and rain-induced sliding processes are performed,which help us to discuss the mechanism of deformation and failure of this landslide together with field observations.It shows the Zhenggang landslide would most likely be activated in Zone I and would gain momentum in Zone II.In order to prevent the potential disaster,a tailing dam is advised to be designed about 175 m downstream from the current landslide boundary of Zone II.Verified by field observations,the presented landslide model can reflect the failure mechanism after rainfall.It can also provide a method to predict the potential disaster and draft disaster prevention measures.

The structural analysis of protein sequences based on the quasi-amino acids code

Proteomics is the study of proteins and their interactions in a cell. With the successful completion of the Human Cenome Project, it comes the postgenome era when the proteomics technology is emerging. This paper studies protein molecule from the algebraic point of view. The algebraic system （∑, ＋, ＊） is introduced, where ∑ is the set of 64 codons. According to the characteristics of （∑, ＋, ＊）, a novel quasi-amino acids code classification method is introduced and the corresponding algebraic operation table over the set ZU of the 16 kinds of quasi-amino acids is established. The internal relation is revealed about quasi-amino acids. The results show that there exist some very close correlations between the properties of the quasi-amino acids and the codon. All these correlation relationships may play an important part in establishing the logic relationship between codons and the quasi-amino acids during the course of life origination. According to Ma F et al （2003 J. Anhui Agricultural University 30 439）, the corresponding relation and the excellent properties about amino acids code are very difficult to observe. The present paper shows that （ZU, ＋,×） is a field. Furthermore, the operational results display that the eodon tga has different property from other stop codons. In fact, in the mitochondrion from human and ox genomic codon, tga is just tryptophane, is not the stop codon like in other genetic code, it is the case of the Chen W C et al （2002 Acta Biophysiea Siniea 18（1） 87）. The present theory avoids some inexplicable events of the 20 kinds of amino acids code, in other words it solves the problem of ＇the 64 codon assignments of mRNA to amino acids is probably completely wrong＇ proposed by Yang （2006 Progress in Modern Biomedicine 6 3）.

A Comparison of Saudi Building Code with 1997 UBC for Provisions of Modal Response Spectrum Analysis Using a Real Building

The study uses an actual building to compare the modal response spectrum analysis results of Saudi Building Code (SBC) and the 1997 Uniform Building Code (UBC) used in Saudi Arabia before the introduction of SBC. A sample of four buildings with reported analysis of comparison between IBC and UBC is taken for confirming the comparison. Eight sample places from SBC map for Saudi Arabia together with two sample places of high seismic activity in USA were taken for the comparisons. The study used software package ETABS in this study for modeling and analysis. The results are dissimilar from the comparisons reported for test places of USA. It is concluded that at most places SBC base shear is higher for both ELFP and MRSA. However, the results cannot be generalized and considered always right. The same is factual for overturning moments. Consequently, we cannot report that SBC is more conservative than UBC for all scenarios.

Extending and analysis of X-Code

X-Code is one of the most important redundant array of independent disk （RAID）-6 codes which are capable of tolerating double disk failures. However, the code length of X-Code is restricted to be a prime number, and such code length restriction of X-Code limits its usage in the real storage systems. Moreover, as a vertical RAID-6 code, X-Code can not be extended easily to an arbitrary code length like horizontal RAID-6 codes. In this paper, a novel and efficient code shortening algorithm for X-Code is proposed to extend X-Code to an arbitrary length. It can be further proved that the code shortening algorithm maintains the maximum-distance-separable （MDS） property of X-Code, and namely, the shortened X-Code is still MDS code with the optimal space efficiency. In the context of the shortening algorithm for X-Code, an in-depth performance analysis on X-Code at consecutive code lengths is conducted, and the impacts of the code shortening algorithm on the performance of X-Code in various performance metrics are revealed.

CCOC：An Optimizing Compiling System for Concurrent C Supporting Inter－process Code Analysis and Optimization

At present, there are some static code analyses and optimizations that can be applied to Concurrent C programs to improve their performance or verify their logical correctness. These analyses and optimizations are inter-process. In order to make their implementation easy, we propose a new method to construct an optimizing compiling system CCOC for Concurrent C. CCOC supports inter-process code analysis and optimization to Concurrent C programs and does not affect the system's portability and separate compilation of source programs. We also discuss some implementation details of CCOC briefly.

Development and validation of a new oxide fuel rod performance analysis code for the liquid metal fast reactor

The integrity and reliability of fuel rods under both normal and accidental operating conditions are of great importance for nuclear reactors.In this study,considering various irradiation behaviors,a fuel rod performance analysis code,named KMC-Fueltra,was developed to evaluate the thermal–mechanical performance of oxide fuel rods under both normal and transient conditions in the LMFR.The accuracy and reliability of the KMC-Fueltra were validated by analytical solutions,as well as the results obtained from codes and experiments.The results indicated that KMC-Fueltra can predict the performance of oxide fuel rods under both normal and transient conditions in the LMFR.

Totally Coded Algorithm for Switched-Current Network Analysis in Frequency Domain

Based on mirror-blocks, a totally coded algorithm （TCA） for switched-current （SI） network analysis in frequency domain is presented. The algorithm is simple, available, and suitable for any swltched-current networks. A basis of analysis and design for switched-current networks via this algorithm is provided.

Hierarchical Symbolic Analysis of Large Analog Circuits with Totally Coded Method

Symbolic analysis has many applications in the design of analog circuits. Existing approaches rely on two forms of symbolic-expression representation: expanded sum-of-product form and arbitrarily nested form. Expanded form suffers the problem that the number of product terms grows exponentially with the size of a circuit. Nested form is neither canonical nor amenable to symbolic manipulation. In this paper, we present a new approach to exact and canonical symbolic analysis by exploiting the sparsity and sharing of product terms. This algorithm, called totally coded method (TCM), consists of representing the symbolic determinant of a circuit matrix by code series and performing symbolic analysis by code manipulation. We describe an efficient code-ordering heuristic and prove that it is optimum for ladder-structured circuits. For practical analog circuits, TCM not only covers all advantages of the algorithm via determinant decision diagrams (DDD) but is more simple and efficient than DDD method.

A Comparative Analysis between the Spanish and Portuguese Seismic Codes: Application to a Border RC Primary School

The Iberian Peninsula is close to the Eurasia-Africa plate boundary resulting in a considerable seismic hazard.In fact,the southwestern Iberian Peninsula is affected by far away earthquakes of long-return period with large-very large magnitude.A project named PERSISTAH(Projetos de Escolas Resilientes aos SISmos no Território do Algarve e de Huelva,in Portuguese)aims to cooperatively assess the seismic vulnerability of primary schools located in the Algarve(Portugal)and Huelva(Spain).Primary schools have been selected due to the considerable amount of similar buildings and their seismic vulnerability.In Portugal,the Decreto Lei 235/83(RSAEEP)is mandatory while in Spain,the mandatory code is the Seismic Building Code(NCSE-02).In both countries,the Eurocode-8(EC-8)is recommended.Despite the fact that both regions would be equally affected by an earthquake,both seismic codes are significantly different.This research compares the seismic action of Ayamonte(Huelva)and Vila Real de Santo António(Portugal).Both towns are very close and located at both sides of the border.Moreover,they share the same geology.This analysis has been applied considering a reinforced concrete(RC)primary school building located in Huelva.To do so,the performance-based method has been used.The seismic action and the damage levels are compared and analysed.The results have shown considerable differences in the seismic actions designation,in the performance point values and in the damage levels.The values considered in the Portuguese code are significantly more unfavourable.An agreement between codes should be made for border regions.

Evaluation of Regular Multistory Buildings Using IBC2009 Code and ESEE Regulations by Pushover Analysis Method

For structural design and assessment of reinforced concrete members, the nonlinear analysis has become an important tool. The purpose of the pushover analysis is to assess the structural performance by estimating the strength and deformation capacities using static, nonlinear analysis and comparing these capacities with the demands at the corresponding performance levels. This paper aims to compare the results given by IBC2009 code and ESEE regulations. In this paper, four RC frames having 5, 15, 20 and 30 storeys were designed for seismicity according to both the recently adopted seismic code in Abu Dhabi (IBC2009) and the ESEE regulations. A pushover analysis is carried out for these buildings using SAP2000 (Ver. 15) and the ultimate capacities of the buildings are established. The obtained pushover curves and plastic hinges distributions are used to compare between the IBC2009 code and ESEE regulations. The comparison showed that there was variation in the obtained results by the two codes and the buildings designed by IBC2009 code were more vulnerable.

Analysis of GB 6675-2003 Nafional Safety Technical Code for Toys in Detail

GB 6675-2003 National Safety Technical Code for Toys, in which the safetylevel of toys has achieved the advanced international level, is the general standard of all kinds oftoys. It will facilitate the improvement of the whole quality of toys and the development of toysindustry. It also improves the competitive ability of our toys in international market. It is a newlandmark of the development of toys industry in China.

Partial flow blockage analysis of the hottest fuel assembly in SNCLFR-100 reactor core

In this paper, we perform an unprotected partial flow blockage analysis of the hottest fuel assembly in the core of the SNCLFR-100 reactor, a 100 MW_(th) modular natural circulation lead-cooled fast reactor, developed by University of Science and Technology of China. The flow blockage shall cause a degradation of the heat transfer between the fuel assembly and the coolant potentially,which can eventually result in the clad fusion. An analysis of core blockage accidents in a single assembly is of great significance for LFR. Such scenarios are investigated by using the best estimation code RELAP5. Reactivity feedback and axial power profile are considered. The crosssectional fraction of blockage, axial position of blockage,and blockage-developing time are discussed. The cladding material failure shall be the biggest challenge and shall be a considerable threat for integrity of the fuel assembly if the cross-sectional fraction of blockage is over 94%. The blockage-developing time only affects the accident progress. The consequence will be more serious if the axial position of a sudden blockage is closer to the core outlet.The method of analysis procedure can also be applied to analyze similar transient behaviors of other fuel-type reactors.

Silhouettes Based Human Action Recognition in Video via Procrustes Analysis and Fisher Vector Coding

This paper proposes a framework for human action recognition based on procrustes analysis and Fisher vector coding(FVC).Firstly,we applied a pose feature extracted from silhouette image by employing Procrustes analysis and local preserving projection(LPP).Secondly,the extracted feature can preserve the discriminative shape information and local manifold structure of human pose and is invariant to translation,rotation and scaling.Finally,after the pose feature was extracted,a recognition framework based on FVC and multi-class supporting vector machine was employed to classify the human action.Experimental results on benchmarks demonstrate the effectiveness of the proposed method.

Calibration and uniqueness analysis of microparameters for DEM cohesive granular material

The differential evolution(DE)algorithm was deployed to calibrate microparameters of the DEM cohesive granular material.4 macroparameters,namely,uniaxial compressive strength,direct tensile strength,Young’s modulus and Poisson’s ratio,can be calibrated to high accuracy.The best calibration accuracy could reach the sum of relative errors RE_(sum)<0.1%.Most calibrations can be achieved with RE_(sum)<5%within hours or RE_(sum)<1%within 2 days.Based on the calibrated results,microparameters uniqueness analysis was carried out to reveal the correlation between microparameters and the macroscopic mechanical behaviour of material:(1)microparameters effective modulus,tensile strength and normal-to-shear stiffness ratio control the elastic behaviour and stable crack growth,(2)microparameters cohesion and friction angles present a negative linear correlation that controls the axial strain and lateral strain prior to the peak stress,and(3)microparameters friction coefficient controls shear crack friction and slip mainly refers to the unstable crack behaviour.Consideration of more macroparameters to regulate the material mechanical behaviour that is dominated by shear crack and slip motion is highlighted for future study.The DE calibration method is expected to serve as an alternative method to calibrate the DEM cohesive granular material to its peak strength.

A comparison of IBC with 1997 UBC for modal response spectrum analysis in standard-occupancy buildings

This paper presents a comparison of the seismic forces generated from a Modal Response Spectrum Analysis （MRSA） by applying the provisions of two building codes, the 1997 Uniform Building Code （UBC） and the 2000-2009 International Building Code （IBC）, to the most common ordinary residential buildings of standard occupancy. Considering IBC as the state of the art benchmark code, the primary concern is the safety of buildings designed using the UBC as compared to those designed using the IBC. A sample of four buildings with different layouts and heights was used for this comparison. Each of these buildings was assumed to be located at four different geographical sample locations arbitrarily selected to represent various earthquake zones on a seismic map of the USA, and was subjected to code-compliant response spectrum analyses for all sample locations and for five different soil types at each location. Response spectrum analysis was performed using the ETABS software package. For all the cases investigated, the UBC was found to be significantly more conservative than the IBC. The UBC design response spectra have higher spectral accelerations, and as a result, the response spectrum analysis provided a much higher base shear and moment in the structural members as compared to the IBC. The conclusion is that ordinary office and residential buildings designed using UBC 1997 are considered to be overdesigned, and therefore they are quite safe even according to the IBC provisions.

Analysis of long non-coding RNA expression profiles in gastric cancer

AIM: To investigate the expression patterns of long non-coding RNAs (lncRNAs) in gastric cancer. METHODS: Two publicly available human exon arrays for gastric cancer and data for the corresponding normal tissue were downloaded from the Gene Expression Omnibus (GEO). We re-annotated the probes of the human exon arrays and retained the probes uniquely mapping to lncRNAs at the gene level. LncRNA expression profiles were generated by using robust multi-array average method in affymetrix power tools. The normalized data were then analyzed with a Bioconductor package linear models for microarray data and genes with adjusted P -values below 0.01 were considered differentially expressed. An independent data set was used to validate the results. RESULTS: With the computational pipeline established to re-annotate over 6.5 million probes of the Affymetrix Human Exon 1.0 ST array, we identified 136053 probes uniquely mapping to lncRNAs at the gene level. These probes correspond to 9294 lncRNAs, covering nearly 76% of the GENCODE lncRNA data set. By analyzing GSE27342 consisting of 80 paired gastric cancer and normal adjacent tissue samples, we identified 88 lncRNAs that were differentially expressed in gastric cancer, some of which have been reported to play a role in cancer, such as LINC00152, taurine upregulated 1, urothelial cancer associated 1, Pvt1 oncogene, small nucleolar RNA host gene 1 and LINC00261. In the validation data set GSE33335, 59% of these differentially expressed lncRNAs showed significant expression changes (adjusted P -value < 0.01) with the same direction. CONCLUSION: We identified a set of lncRNAs differentially expressed in gastric cancer, providing useful information for discovery of new biomarkers and therapeutic targets in gastric cancer.

Analysis of Leakage in Bolted-Flanged Joints Using Contact Finite Element Analvsis

The evolution of leakage is studied using detailed contact finite element analysis. The distribution of stress at the gasket is analyzed using a contact condition based on slide-line elements using ABAQUS, a commercial finite element code, Slide-line elements also take into account pressure penetration as contact that is lost between flange and gasket. Results are presented for a particular flange, a raised face flange sealed by a mild steel gasket. A comparison of the results from the gasket contact analysis and the contact conditions specified by the ASME Boiler and Pressure Vessel Code, Sections VIII, Division 1 shows that the conditions specified in the ASME Code predict leakage relatively accurately.

Independent component analysis to physical-layer network coding over wireless fading channels

A new combinational technology is proposed,which is feasible to apply physical-layer network coding（PNC） to wireless fading channels by employing the harmful interference strategically.The key step of PNC is that sources broadcast signals simultaneously without orthogonal scheduling.Naturally,the signals overlap in the free space at the receivers.Since the signals from different sources are mutual independent,rooted on this rational assumption,an enhanced joint diagonalization separation named altering row diagonalization（ARD） algorithm is exploited to separate these signals by maximizing the cost function measuring independence among them.This ARD PNC（APNC） methodology provides an innovative way to implement signal-level network coding at the presence of interference and without any priori information about channels in fading environments.In conclusions,the proposed APNC performs well with higher bandwidth utility and lower error rate.

THROUGHPUT ANALYSIS OF TWO-HOP WIRELESS NETWORKS WITH NETWORK CODING

A Two-hop Wireless Network (TWN) is the basic topology structure that provides network coding opportunity for improving throughput. Network coding on a homogeneous TWN, in which all the data flows have the same packet size and all the links have the same transmission rate, has been extensively investigated. In this paper, network coding on more practical heterogeneous TWNs, featured by various packet sizes and transmission rates, is studied. Based on the Markov model, the throughput of the proposed network coding scheme, together with the throughput gain, is derived, which matches the simulation results very well. Numerical analyses indicate that, encoding the packets with close size and close transmission rate and enlarging buffer size at the relay node help in improving the throughput gain.